I have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 RepliesLMS 4.21
Solaris 10
Trying to schedule a Best Practices Network Discrepancy Report everything works find (reports could be scheduled) except entering a eMail-Address in Textfield: E-mail.
Hitting the Submit Button results in nothing, no popup stating the created job ID; without any content in this field a job is able to be scheduled.
I am attemtping to install new ssl certs on our 5.3 cluster. I was able to generate the CSR on the Primary host. When I attempt to generate the csr on the secondary host, I receive the following error:
This System Failure occurred: Error while remotely calling Primary to create: com.cisco.nm.acs.im.certificate.CertificateRequest Object{ request=[B@144cead, privateKey=null, encryptedPrivateKeyPassword=[B@5ce155, certificateSubject=CN=xxxx.xxxxxx.net, keyLength=2048, digest=SHA1, timeStamp=null, friendlyName=null, guid=[B@1cd99ca, description=null, name=xxxx.xxxx.net, version=0, id=0}. Your changes have not been saved.Click OK to return to the list page.
Both hosts are running identical versions:
Cisco ACS VERSION INFORMATION
-----------------------------
Version : 5.3.0.40
Internal Build ID : B.839
I have cisco acs 5.3 appliance. Issue is, when i view tacacs accounting it only shows 100 pages of records. So first kindly tell me if this is the limitation of acs 5.3 to only show 100 pages. Secondly if i want to export the report of last 30 days, its also not showing the last 30 days.
How to get the report of last 30 days
I am setting up reports for tacacs accounting on ACS 5.3. However, accounting only seems to work after entering enable mode on the switch. I would like to see all commands, even the enable command when in privlage 1 mode.
View 2 Replies View RelatedIn ACS 5.3 radius authentication report I want to show the called-station-id attribute. (this was appearning on failed and passed auth in ACS 4.2). The value of called-station-id appears in the details. However, I want it to appear as a column with the report.
View 2 Replies View Relatedi just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.Everything works fine except for the "Monitoring & Report Viewer"-Tab:When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
View 4 Replies View RelatedI have an ACS Server 5.1 which is used to authenticate my cisco and non-cisco devices. however when I take report on my authentications, the time shown in the report is wrong. However, when I take my mouse pointer to the report , the correct time is highlighted.
View 4 Replies View RelatedWe have installed ACS 4.1 as authentication server for wireless SSID. Need to create list of ACS user expired on specific date.Is it possible to create report in ACS 4.1 as per user account expiry date?
View 3 Replies View RelatedDoes Cisco WLC 5508 runnig code 6.0.196.0 allows you to generate CSR? Or do you have to use OPENSSL like in previous versions?
View 16 Replies View RelatedI am unable to see the interface down alarms on my cisco works LMS 4.0 .
This problem is happening only for the Gigabit interfaces , i m receiving the alarms for the POS interfaces . The router status is showning as known .i have also added this interface in poller also .
I've got a a customer that is using a single sign on product that uses agents installed on the customer's domain controllers. This works fine accept for one scenario. When the customer transitions from a wired to wireless connection or vice versa. We have determined the reason for this is that the DCs are not getting Windows logon events ie 540 on 2003 servers or 4624 on 2008+. The users have files shares mapped onto member servers but refreshing those is not hitting the DCs.
Any way to ensure hitting a domain resource generates a logon event on a DC without directly mapping a resource on a DC. If it matters there are 50 domain controllers and around 200 member servers spread all over 48 states.
We are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.After escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 2 Replies View RelatedI've noted a number of traps reported correctly but with the wrong SSID in the detail on 7.0.116.0
View 1 Replies View RelatedWe are using CISCO LMS 4.2.3 in our network in India, we are facing a issue regarding alarm generation for a protocol flap/down, especially when BGP / OSPF neighbourship got flapped.These flapping will result in the data service degradation , by which we came to know that some protocol flap may occurred at router end & then we go for the manual check by login into the router.after escalating the same to cisco we came to know that it is a bug of Cisco LMS. using any other method/technique to view the protocol down alarms automatically for cisco routers.
View 1 Replies View RelatedWe have Cisco 3945 Router and generating crashinfo while firing PRI from this Router.
View 1 Replies View RelatedRecently I had came across 1 issue where one of the server IP had conflicted with VIP of Nexus core switch. The blade server was physically connected to Nexus Distribution switch which in turn connects to Nexus core. Neither Nexus core nor distribution had generate any logs in regards to IP conflict which ideally happens on Cisco catalyst switches. I haven't find any document on cisco as well as on internet for this issue . I dont know what logging need to enable on Nexus for this specific case . There are different logging levels define for every feature like hsrp, ip,monitor etc...
We have Nexus 7k with latest release 4.2(6) Software
BIOS: version 3.22.0
kickstart: version 4.2(6)
system: version 4.2(6)
Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 22.05.2012
ISP :
I have a TD-W8951ND v5 on the latest firmware.
I recently broke my broadband data cap which surprised me as I had not been using the internet much.
I only have tablet which I switched off having first checked the router to make sure there were no other wireless connections and adding MAC address filtering to be sure no one else was stealing my bandwidth. With just my router connected to the ISP, my ISP has recorded 170MB of downloaded data in 3.5 hours. Switching off the router stops the traffic being recorded (as you would expect), but when switched back on the large data transfers start up again.
I have plugged in an older router (not wireless) and no traffic is generated, so it seems to be the TP-Link router rather than my ISP or ADSL circuit that is at fault.
I have a dir-655 and have two schedules set up, one for weekend and one for week days, for wireless access. Is there a way to switch from one schedule to the other automatically?
View 1 Replies View RelatedWe have two 5508s in a boarding school environment and about 5 wireless networks. Administration wants to know how can we shut down the student networks @ 11:30pm and then have them come on @ 6:00am. Othern than doing it manually is there another way?
View 3 Replies View RelatedThis week, I replaced a netgear FVS318G with a Cisvo RV180, firmware 1.0.2.6. I have a very limited knowlege of routers and protocols, mostly from exposure as a home user. My goal is to define firewall rules on my RV180 that define when my tween-aged kids can and cannot play on X-Box live, as was the case on the FVS318G. I am aware that X-Box has several port ranges. Specifically, I have defined the following for one XBox port range to always block, as an example:
[code]...
A similar rule on the FVS318 would block XBOX (and also on a schedule), but this is not the case on the RV180. I guess I don't uderstand how to correctly implement rAccess Rules on this device.
Is there any way to schedule the shutoff of WiFi every night between certain hours?
View 1 Replies View RelatedWireless is still on also after time set in the schedule is over. I connected to the router through its web page and set wireless on with schedule from 8 am to 9 pm. But wireless is running also after 9 pm. I checked the time settings on the router and they are correct. FW version is 2.01
View 1 Replies View RelatedI would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
I own a WRT54G linksys router. works really great but i'm missing two features - being able to change the tx power - being able to turn wifi off on a schedules you can guess, i'm being apprehensive regarding EMF, so i'd like to turn off wifi at night and lowering the tx signal to the minimum required.the question: i saw two alternative firmware, dd-wrt and tomato, I think they both offer the tx signal control but no one has wifi schedule. do you know if there is a firmware which specifically gives me the requirements i need?
View 2 Replies View RelatedCan I schedule a weekly reboot with this router?
View 3 Replies View RelatedI was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
View 3 Replies View RelatedDIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
I just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.
Any way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage. They haven't frozen cause I can still connect to them via a browser
View 2 Replies View RelatedI have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
How to schedule automatic Xlate sessions cleaning in ASA5550. I want to clear few global nat sessions manually every week.Is there any way to automate that?
View 1 Replies View RelatedIs it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies View Related