Cisco AAA/Identity/Nac :: ACS 5.1.0.44 / Cannot Launch Monitoring And Report Viewer
Dec 2, 2010
i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.Everything works fine except for the "Monitoring & Report Viewer"-Tab:When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
View 4 Replies
ADVERTISEMENT
Dec 24, 2012
I have a ea4500 router with 3 pc's, 4 iphones, 2 playstations, ipad, ps vita, house cat, and a printer all wired into the internet. There are four of us in the family all using the internet but I suspect one of us is using considerably more than the other. I live in the country and my current isp has us on the max available account - 50 gigs / month. Lately we have been hitting 45 in less than 3 weeks into the month. I would like to know which of the things connected or which person is using the most of the bandwidth up. Is there a program that doesn't require a phd in quantum physics and networking that can monitor this for me and spit out a report.
View 9 Replies
View Related
Apr 7, 2011
When I launch Monitoring & Report Viewer and select one of the report (TACACS authorization for example) I want to filter the search with Interactive Viewer, but I can't cause all options are grayed. I've heared that some flash is needed but I've got plugins installed and nothing changed.
Can I run in in demo version? cause I've read that there is an add-on license which "Add-on licenses are available to support deployments that are larger than 500 devices (AAA clients) and to support advanced monitoring, reporting and troubleshooting functionality"
View 5 Replies
View Related
Mar 10, 2013
After logging in to the ACS, what is the command to launch the GUI on a Cisco ACS 5.x.
View 1 Replies
View Related
Feb 15, 2013
I have recently installed acs5.2 evaluation on a vmware and i can't launch common task on authorization profiles when i click on it i have the bellow message javascript:cuesToggleTab('NetworkAccess',1,false,false
View 4 Replies
View Related
Mar 3, 2013
I have cisco acs 5.3 appliance. Issue is, when i view tacacs accounting it only shows 100 pages of records. So first kindly tell me if this is the limitation of acs 5.3 to only show 100 pages. Secondly if i want to export the report of last 30 days, its also not showing the last 30 days.
How to get the report of last 30 days
View 1 Replies
View Related
May 14, 2013
I am setting up reports for tacacs accounting on ACS 5.3. However, accounting only seems to work after entering enable mode on the switch. I would like to see all commands, even the enable command when in privlage 1 mode.
View 2 Replies
View Related
Feb 27, 2012
I have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 Replies
View Related
Jun 24, 2012
In ACS 5.3 radius authentication report I want to show the called-station-id attribute. (this was appearning on failed and passed auth in ACS 4.2). The value of called-station-id appears in the details. However, I want it to appear as a column with the report.
View 2 Replies
View Related
Jun 20, 2012
I have an ACS Server 5.1 which is used to authenticate my cisco and non-cisco devices. however when I take report on my authentications, the time shown in the report is wrong. However, when I take my mouse pointer to the report , the correct time is highlighted.
View 4 Replies
View Related
Jan 1, 2013
We have installed ACS 4.1 as authentication server for wireless SSID. Need to create list of ACS user expired on specific date.Is it possible to create report in ACS 4.1 as per user account expiry date?
View 3 Replies
View Related
Apr 3, 2012
We're currently running on ACS 5.2.0.26.9 with 2 appliances (one primary and one secondary).Today, I wanted to get some reports from the Monitoring and Reports tool. At beginning, it seemed impossible to generate them. Later, I decided to reload first primary and then secondary. As soon as I've done it, I got an email alert telling me that it failed parsing NAD.
Cisco Secure ACS - Alarm Notification
Severity: Critical
Alarm Name
System Alarm [Collector]
Cause/Trigger
[code]....
I don't really find where I can find the Collector log...Anyway now when I generate a 30 days report, I only get data up to 23.03.2012. Nothing recent !
View 7 Replies
View Related
Jun 16, 2010
Just installed ACS 5.0.0.21. Monitoring and reports database was working, but now is not. When trying to open, I get "Monitoring and reports database currently unavailable. Trying reconnect in 5 minutes." From CLI "sho application status acs" gives me the following:
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'adclient' runningProcess 'view-database' runningProcess 'view-collector' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' running
Also, logs show nothing unusual.
View 6 Replies
View Related
Mar 26, 2012
I am trying to add ACS 1121 (ver 5.3) to monitoring and seems that MIB are missing. Need MIB for this device which I can use in monitoring tool.
View 1 Replies
View Related
Aug 13, 2012
I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are healthy.
Any one know if that can be configured? I figured i'd ask here before opening a TAC.
View 2 Replies
View Related
Jan 31, 2011
I have not managed to get the Monitoring to work on the ACS 5.1. This is an eval version. Advanced monitoring and reporting is installed on the ACS. This is my configuration on the Cisco Router
aaa accounting exec default start-stop group tacacs+aaa accounting commands 0 default start-stop group tacacs+aaa accounting commands 1 default start-stop group tacacs+aaa accounting commands 15 default start-stop group tacacs+aaa accounting connection default start-stop group tacacs+
logging origin-id iplogging facility sysloglogging source-interface GigabitEthernet1/1logging host 1.1.1.1 transport udp port 20514
logging monitor informational
epm logging
On the ACS, when I open the dashboard --> ACS health -> I get Status not available.Global Instance under Logging Categories been configured for local logging?
View 4 Replies
View Related
Mar 26, 2012
I am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
View 6 Replies
View Related
Jul 17, 2012
I have a Cisco ACS 5.1 virtual appliance which has been working fine, I have however just discovered that it is now unable to provide me with any logs. TACACS authentication is still working without any issues, the only problem I have is viewing the logs.
View 6 Replies
View Related
Apr 30, 2012
Need to know the step by step procedure for monitoring site-to-site VPN tunnel (up/down) using SNMP on Cisco ASA 5505.
View 1 Replies
View Related
Mar 31, 2012
ive googled over the past last hour and tried everything i found. But nothing worked. So here i am once again asking the geniuses of TSF for their amazing support recently installed VNC on both my laptops, specs below[CODE]
View 15 Replies
View Related
Oct 18, 2012
On a windows 2003 data server with a 2008 domain controller, I have several Terminal Servers that are setup to only allow one remote time entry program to run. Totally locked down from network / internet (Kiosk Mode). Now I need to be able to view pdf files in a directory. How can I do this without giving access to the disks that are available for the time entry program to write back. The time entry requires a mapped drive with read/write access. Every pdf viewer I have found so far gives the ability to "File Open/Save as" and thereby gives access the the shared drive. If I use an Internet Browser then I have the same problem.
View 1 Replies
View Related
Aug 22, 2011
Every year I attend a local motorsport event and I am usually responsible for providing a live online video broadcast of the event which I do using a website such as ustream.tv or similar. The event is non-profit so spending as little money as possible or none at all is the best option for us. We use a 3G card/dongle and a laptop with 2 or 3 webcams for the video feed....The results/scoring system in use at the event is controlled by the organisers and they have setup a VNC server where teams can connect with their laptops via a wireless network to view results, what I would like to do, is to include the results screen in my video feed. So somehow, I need to trick my computer into thinking that the VNC viewer software is a video input device.I have looked for something similar last year but didn't have much success, If separate laptops are needed, I have 3 windows laptops at my disposal and a macbook pro which will be on the same network. Whichever one will be most suitable for the task will be used.
View 2 Replies
View Related
Jan 3, 2012
I want to block team viewer using cisco ASA-5585 asdm..
How to block it using regular expression
View 1 Replies
View Related
Jun 1, 2013
I have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
View 3 Replies
View Related
May 9, 2012
I am deploying a small wireless LAN (192.168.1.xxx) at a remote site and would like to access a PC at LAN IP address 192.168.1.2 across the Internet via TeamViewer so as to monitor devices on that LAN. The wireless LAN uses about 12 Cisco Aironet 1310 bridges in a ROOT-NONROOT (I guess this is point-to-multipoint?) configuration.Our ISP has given us a single static WAN IP address, subnet mask, gateway, and two DNS server addresses.
My intent was to assign our static WAN IP address from the ISP to our RV082 router, plug the LAN devices (including the PC at 1.2) into the RV082, and then use Network Address Translation (NAT) to forward TeamViewer traffic to the PC at 1.2. But the RV082's user manual says NOT to use the router's WAN IP address in the NAT table.So I'm confused as to how to send remote TeamViewer traffic to the PC inside my LAN. Is NAT not the way to do this? Should I be using port forwarding instead?I guess another way of skinning this cat would be to put a second NIC in the PC and let the second NIC have the WAN IP address so that it would be the first point of contact from outside, but that defeats some of my purposes for having the RV082 in the first place.
View 1 Replies
View Related
Jul 11, 2011
I have a newish instance of 5520 running. I am seeing some odd logging issues in that the logs are significantly delayed showing up in the real time viewer. I'll try to connect, say on remote desktop, and will not see the traffic in the viewer for up to 20 seconds or so after I'm already connected to the server. I have not seen this before.
View 1 Replies
View Related
Feb 22, 2013
I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies
View Related
Jun 20, 2012
I have installed lms 4.1 on a windows 2008 server however after installation, the webgui cant be launched
View 3 Replies
View Related
Aug 2, 2011
Cannot Launch www.facebook.com it say " Firefox can't establish a connection to the server at www.facebook.com "
View 1 Replies
View Related
Oct 23, 2011
During the upgrade of my itunes/iphone to ios and iCloud, IE suddenly stopped working and hasn't worked since. I keep getting a message saying there is a problem with it and if Windows finds a solution, i will be notified.It's hard to troubleshoot because I can't get on the internet with that PC.It's running Windows 7.
View 1 Replies
View Related
Jan 20, 2012
Any of the internet browsers I have installed on my pc won't launch.
- programs like skype or Y!Messenger work fine
- I did a system restore and nothing
- I uninstalled and reinstalled firefox (that's my main browser, but IE and chrome don't launch either)
- the process shows up for a few seconds in task manager and then just disappears
- sometimes the browser opens but closes itself in less than a second
- I ran a scan with Malwarebyte&Antimalware and nothing shows up
View 1 Replies
View Related
Oct 7, 2011
i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies
View Related
Dec 29, 2012
using a Linksys E2500. I have a Ubuntu "server" set up which i can access on my LAN through VNC Viewer (windows machines) no problem. I can even access it through the external IP address on a machine inside the LAN (both internal address and external address work from inside the LAN). I set up port forwarding (per portforward.com) but i still can not access my machine from outside the LAN. It has a static IP as well btw.
View 2 Replies
View Related