ive googled over the past last hour and tried everything i found. But nothing worked. So here i am once again asking the geniuses of TSF for their amazing support recently installed VNC on both my laptops, specs below[CODE]
View 15 RepliesOn a windows 2003 data server with a 2008 domain controller, I have several Terminal Servers that are setup to only allow one remote time entry program to run. Totally locked down from network / internet (Kiosk Mode). Now I need to be able to view pdf files in a directory. How can I do this without giving access to the disks that are available for the time entry program to write back. The time entry requires a mapped drive with read/write access. Every pdf viewer I have found so far gives the ability to "File Open/Save as" and thereby gives access the the shared drive. If I use an Internet Browser then I have the same problem.
View 1 Replies View RelatedEvery year I attend a local motorsport event and I am usually responsible for providing a live online video broadcast of the event which I do using a website such as ustream.tv or similar. The event is non-profit so spending as little money as possible or none at all is the best option for us. We use a 3G card/dongle and a laptop with 2 or 3 webcams for the video feed....The results/scoring system in use at the event is controlled by the organisers and they have setup a VNC server where teams can connect with their laptops via a wireless network to view results, what I would like to do, is to include the results screen in my video feed. So somehow, I need to trick my computer into thinking that the VNC viewer software is a video input device.I have looked for something similar last year but didn't have much success, If separate laptops are needed, I have 3 windows laptops at my disposal and a macbook pro which will be on the same network. Whichever one will be most suitable for the task will be used.
View 2 Replies View RelatedI have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies View Relatedi just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.Everything works fine except for the "Monitoring & Report Viewer"-Tab:When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
View 4 Replies View RelatedWhen I launch Monitoring & Report Viewer and select one of the report (TACACS authorization for example) I want to filter the search with Interactive Viewer, but I can't cause all options are grayed. I've heared that some flash is needed but I've got plugins installed and nothing changed.
Can I run in in demo version? cause I've read that there is an add-on license which "Add-on licenses are available to support deployments that are larger than 500 devices (AAA clients) and to support advanced monitoring, reporting and troubleshooting functionality"
i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies View Relatedusing a Linksys E2500. I have a Ubuntu "server" set up which i can access on my LAN through VNC Viewer (windows machines) no problem. I can even access it through the external IP address on a machine inside the LAN (both internal address and external address work from inside the LAN). I set up port forwarding (per portforward.com) but i still can not access my machine from outside the LAN. It has a static IP as well btw.
View 2 Replies View RelatedI want to block team viewer using cisco ASA-5585 asdm..
How to block it using regular expression
I have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
View 3 Replies View RelatedI am deploying a small wireless LAN (192.168.1.xxx) at a remote site and would like to access a PC at LAN IP address 192.168.1.2 across the Internet via TeamViewer so as to monitor devices on that LAN. The wireless LAN uses about 12 Cisco Aironet 1310 bridges in a ROOT-NONROOT (I guess this is point-to-multipoint?) configuration.Our ISP has given us a single static WAN IP address, subnet mask, gateway, and two DNS server addresses.
My intent was to assign our static WAN IP address from the ISP to our RV082 router, plug the LAN devices (including the PC at 1.2) into the RV082, and then use Network Address Translation (NAT) to forward TeamViewer traffic to the PC at 1.2. But the RV082's user manual says NOT to use the router's WAN IP address in the NAT table.So I'm confused as to how to send remote TeamViewer traffic to the PC inside my LAN. Is NAT not the way to do this? Should I be using port forwarding instead?I guess another way of skinning this cat would be to put a second NIC in the PC and let the second NIC have the WAN IP address so that it would be the first point of contact from outside, but that defeats some of my purposes for having the RV082 in the first place.
I have a newish instance of 5520 running. I am seeing some odd logging issues in that the logs are significantly delayed showing up in the real time viewer. I'll try to connect, say on remote desktop, and will not see the traffic in the viewer for up to 20 seconds or so after I'm already connected to the server. I have not seen this before.
View 1 Replies View RelatedI installed a new ASA using 8.2.2 version and ASDM 6.2.5 version in contexts mode.When i enable logging for ASDM as debugging i cannot use the real time log viewer because I have an error "Syslog connection Lost. Try restarting the syslog connection", I tried to reconnect using the icon at the bottom but nothing change.
View 9 Replies View RelatedI'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging. The hit count is rising quite rapidly but when selecting "Show Log" the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the "Filter By" field and no logs are ever shown.
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
how I can get the RTLV working?
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
I connect to my corporate network using Cisco AnyConnect Secure Mobility Client. Once connected I can no longer print to my LAN attached printer and other local resources. I use the Cisco/Lyncsys E4200 router on my LAN and can re-connect to the storage on the local LAN by setting up Port Forwarding of port 21 and MS Windows FTP folder sharing. However, I can't seem to connect to a Terminal Services client by forwarding port 3389. Is there a way to connect to the local LAN after logging into the VPN connection. I can connect to regular HTTP/HTTPS sites and most other type of connectiins, just not my own local resources.
View 3 Replies View RelatedWhen I first installed my Netgear N600, my new LG 570 BluRay hooked right in. Ten days later, no dice. Tried rebooting everything, in the right order. Still nothing.
View 3 Replies View RelatedIs it possible to connect two different ips together? A proxy server : 192.168.1.1. All the connections are going through this Server, everything is working fine if the ip range is 192.168.1.XXX Now, when i changed the ip range from 192.168.1.XXX to 192.168.2.XXX im not able to access network, Note: default gateway is the proxy server itself..
View 2 Replies View Relatedhow can i connect two different lans of ip addresses of head office in 192.168.10.series and branch 1 192.168.11.series, branch 2 in 192.168.12 series, branch 3 in 192.168.13. series. head office and the branches are connected with wireless
View 1 Replies View RelatedWe have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.
Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.
i have the network key and its connecting to the network but wen i try go onto the internet it comes up cannot display website or somthing likt that..it came up sumthin about .netframework aswell i don rele ave a clue wat to do next.
View 1 Replies View RelatedI'm an experienced user with pcs but an absolute newbie with networking, so apologies if this is in the wrong section. I've moved into a new house that has a wireless widi (sp?) that my flatmate uses to play videos from his laptop on the tv. I asked if he still has the software he installed when he got it but he doesn't, and the software i've tried installing from searching the web hasn't worked. What should i do?
View 1 Replies View RelatedI've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies View RelatedI'm having an irritating problem with an internet USB dongle in my new computer. I connected the dongle to a working USB port where the computer installed the drives/program that existed on the dongle. However, when I start the program it says no device found. I tried pulling out the USB and then plugging it back into the USB port whereas the computer first gives me a "pling" sound that it has detected the device and immediatly after that sad sound that says the device has been pulled out even though it's still securely in the USB slot[CODE]
View 2 Replies View RelatedI bought a VPS from a reputable company and all was well untill last night. I am unable to connect to my VPS via SSH, VNC or even my Plesk Power Panel directly. I Can connect to Plesk power panel through a web-based proxy ( like daveproxy ).The error i get when trying to connect via SSH is: "Network Error: Software caused connection abort"VNC error: ReadExact: SocketIPv4 error while reading.
View 1 Replies View RelatedStill trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. I read the thread on the Plesbit network but not sure I understand his issues. Seems similar to mine though.
View 1 Replies View RelatedWe just moved, and the family room (where the desktop is) had no coaxial outlet. The exterior box is at the other side of the house, and instead of wiring around our entire home, cable guy said we could easily set it up where the previous owners did (living room), and use a Netgear USB to make the desktop wireless.At Best Buy, I was told to buy Netgear N600 Wireless Dual Band USB Adapter WNDA3100 for $50. I install with the cd, and then plug in the USB as it suggests, and it just blinks from yellow to blue, not picking up my netgear wireless router in the other room. I go back to Best Buy, and they say that I need to buy another thing, now it's Netgear XET1001 85 Mbps Wall-Plugged Ethernet Adapter for another $70.Plugged one unit into the wall, and then plugged it into the Netgear Wireless Router. This will give me a solid light for Power LED and Ethernet LED, and then the middle, Powerline LED is a solid blue. With the second adapter, I plugged that in to my family room (with the desktop) and attached it also to my desktop with it's cord. This one has a solid light for the Power and Ethernet LED, but for the Powerline LED it's off. So it's not finding the other compatiable key, if I put it in between the wireless router, and my desktop (in the hall or kitchen) it will have all lights on, but I can't connect it with the cord to the desktop, and the USB does not pick it up any point.
Now, I can connect with my phone to the wireless network anywhere in my house, including the second floor. However, I can not, with or without the wireless adapters, connect with my laptop to the wireless network. I've done wireless with my laptop since I purchased it a few years ago, and while it can "see" the network, when I try to connect I get an error message that it's unable to join the network, and is now out of range, even when I'm sitting right in front of my modem/wireless router. It doesn't prompt for the password, I tried to manually add the password under network properties but it did the same error.I just don't know what to do or to try next, I don't know if I've set it up wrong, I followed the pictures in the manual, which is all it pretty much comes with, and did all the installation disks. Without it though I can't connect with my laptop, but my phones can..
I would like to stat a net cafe, so how can I start that particular net cafe in one CPU with 5 monitor? Here I would also like to know, have there any kind of disturbance in five monitor if use different user in different way?
View 2 Replies View RelatedMy primary DNS all of a sudden "disconnected" itself. I have tried flushing DNS and powering off the modem and turning it back on again after 10 seconds. It seems that these methods are not working.
View 5 Replies View Relatedhow do I link up my blackberry torch And my ps3 with the wifi.I'm not get connected
View 1 Replies View RelatedI have moved my internet fro sky to virgin i still have my old router is it possible to connect them together so i get a better signal around my home.
View 1 Replies View RelatedWhen I got my Actiontec GT704WGB router/modem(It's one of those ones that doubles as a router/modem.) My ISP is Verizon. I have McAfee is my anti-virus. Every time I try to connect it says "A connection error has occurred: The connection point has timed out." I use channel 11, have a 64 byte encrypted WEP key. Yesterday I found a neighbors connection, connected just fine, and it had a signal strength of about 40%. Why on earth can't I connect to my ONE HUNDRED PERCENT CONNECTION BUT I CAN CONNECT TO A FORTY PERCENT CONNECTION.EVERYTHING can connect to my router EXCEPT my PSP. [code]
View 7 Replies View RelatedI have had troubles connecting my PS3 to my Orange livebox. At first, I had the problem that it could not obtain the IP address so I manually entered it. This solved the problem. However, I also manually entered the Subnet Mask, Default Router (Gateway), Primary DNS and Secondary DNS. Now when connecting, it says I have a DNS error.(80710102)
View 1 Replies View Related