Using VNC Viewer As A Video Source?
Aug 22, 2011
Every year I attend a local motorsport event and I am usually responsible for providing a live online video broadcast of the event which I do using a website such as ustream.tv or similar. The event is non-profit so spending as little money as possible or none at all is the best option for us. We use a 3G card/dongle and a laptop with 2 or 3 webcams for the video feed....The results/scoring system in use at the event is controlled by the organisers and they have setup a VNC server where teams can connect with their laptops via a wireless network to view results, what I would like to do, is to include the results screen in my video feed. So somehow, I need to trick my computer into thinking that the VNC viewer software is a video input device.I have looked for something similar last year but didn't have much success, If separate laptops are needed, I have 3 windows laptops at my disposal and a macbook pro which will be on the same network. Whichever one will be most suitable for the task will be used.
View 2 Replies
ADVERTISEMENT
Mar 31, 2012
ive googled over the past last hour and tried everything i found. But nothing worked. So here i am once again asking the geniuses of TSF for their amazing support recently installed VNC on both my laptops, specs below[CODE]
View 15 Replies
View Related
Oct 18, 2012
On a windows 2003 data server with a 2008 domain controller, I have several Terminal Servers that are setup to only allow one remote time entry program to run. Totally locked down from network / internet (Kiosk Mode). Now I need to be able to view pdf files in a directory. How can I do this without giving access to the disks that are available for the time entry program to write back. The time entry requires a mapped drive with read/write access. Every pdf viewer I have found so far gives the ability to "File Open/Save as" and thereby gives access the the shared drive. If I use an Internet Browser then I have the same problem.
View 1 Replies
View Related
Feb 22, 2013
I have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies
View Related
Dec 2, 2010
i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.Everything works fine except for the "Monitoring & Report Viewer"-Tab:When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
View 4 Replies
View Related
Apr 7, 2011
When I launch Monitoring & Report Viewer and select one of the report (TACACS authorization for example) I want to filter the search with Interactive Viewer, but I can't cause all options are grayed. I've heared that some flash is needed but I've got plugins installed and nothing changed.
Can I run in in demo version? cause I've read that there is an add-on license which "Add-on licenses are available to support deployments that are larger than 500 devices (AAA clients) and to support advanced monitoring, reporting and troubleshooting functionality"
View 5 Replies
View Related
Oct 7, 2011
i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies
View Related
Dec 29, 2012
using a Linksys E2500. I have a Ubuntu "server" set up which i can access on my LAN through VNC Viewer (windows machines) no problem. I can even access it through the external IP address on a machine inside the LAN (both internal address and external address work from inside the LAN). I set up port forwarding (per portforward.com) but i still can not access my machine from outside the LAN. It has a static IP as well btw.
View 2 Replies
View Related
Jan 3, 2012
I want to block team viewer using cisco ASA-5585 asdm..
How to block it using regular expression
View 1 Replies
View Related
Jun 1, 2013
I have a ASA5505 and I'm having trouble to achieve the following setup, block any kind of connection from outside except for IIS on port 80 and 443 but allow from the server to access any outside address, by domain or ip. Right now apps writen in C# on the server are throughing socket errors and Teamviewer remote control is not working, I would like it to replace remote desktop.
View 3 Replies
View Related
May 9, 2012
I am deploying a small wireless LAN (192.168.1.xxx) at a remote site and would like to access a PC at LAN IP address 192.168.1.2 across the Internet via TeamViewer so as to monitor devices on that LAN. The wireless LAN uses about 12 Cisco Aironet 1310 bridges in a ROOT-NONROOT (I guess this is point-to-multipoint?) configuration.Our ISP has given us a single static WAN IP address, subnet mask, gateway, and two DNS server addresses.
My intent was to assign our static WAN IP address from the ISP to our RV082 router, plug the LAN devices (including the PC at 1.2) into the RV082, and then use Network Address Translation (NAT) to forward TeamViewer traffic to the PC at 1.2. But the RV082's user manual says NOT to use the router's WAN IP address in the NAT table.So I'm confused as to how to send remote TeamViewer traffic to the PC inside my LAN. Is NAT not the way to do this? Should I be using port forwarding instead?I guess another way of skinning this cat would be to put a second NIC in the PC and let the second NIC have the WAN IP address so that it would be the first point of contact from outside, but that defeats some of my purposes for having the RV082 in the first place.
View 1 Replies
View Related
Jul 11, 2011
I have a newish instance of 5520 running. I am seeing some odd logging issues in that the logs are significantly delayed showing up in the real time viewer. I'll try to connect, say on remote desktop, and will not see the traffic in the viewer for up to 20 seconds or so after I'm already connected to the server. I have not seen this before.
View 1 Replies
View Related
Feb 10, 2010
I installed a new ASA using 8.2.2 version and ASDM 6.2.5 version in contexts mode.When i enable logging for ASDM as debugging i cannot use the real time log viewer because I have an error "Syslog connection Lost. Try restarting the syslog connection", I tried to reconnect using the icon at the bottom but nothing change.
View 9 Replies
View Related
Dec 20, 2011
I'm running into this issue on an ASA 5520 running version 8.2(2)9 and ASDM version 6.2(1).
I have an ACL denying traffic to a certain IP range and the logging level set to Debugging. The hit count is rising quite rapidly but when selecting "Show Log" the Real-Time Log Viewer opens with a value of 0x13d0ee2a in the "Filter By" field and no logs are ever shown.
Logging is enabled globally and Logging Filters on ASDM is set to Debugging as well.
how I can get the RTLV working?
View 7 Replies
View Related
Feb 15, 2012
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
View 6 Replies
View Related
Dec 16, 2011
I have a nat statement to nat a subnet to a host address. Only the host address is allowed to traverse the VPN. However when I use a route map to do this, I cannot see NAT being performed and my VPN does not come up. When I use a static NAT for a 1 to 1 host translation I can see nat being performed and the VPN comes up. Using the route map method, the other party said our source IP is 0.0.0.0 0.0.0.0.
View 6 Replies
View Related
Dec 11, 2012
I have been trawling the interenet looking for an answer to the i but to no avail.Can you change the source port that windows uses when it makes a connection to another host.
[code]...
View 7 Replies
View Related
Jul 24, 2011
I have a situation which requires some non best practice stuff to be done. There is a box behind an ASA that has a lot of code that references public DNS names and therefore needs access to itself and a number of other boxes on the same subnet via the public DNS names (that obviously resolve to public IPs). This traffic is dropped on some pretty fundamental ASA characteristics.I know this isn't really ideal, and it should be handled by DNS nstead, but I'm in somewhat of a bind and need to know if the ASA can allow this traffic.I figure I could match the traffic and exempt it from state-checking and that would probably work, but it's not a very graceful solution.
View 2 Replies
View Related
Mar 27, 2012
i have issue with whenever i m trying to download any file it's get upto almost 95-98%,but after suddenly stop.this issue with firefox, chrome browser
View 1 Replies
View Related
Sep 23, 2012
why the command "source cpu rp" has been removed from IOS15.0(1)SY1. I can succesfully configure the following ERSPAN on 12.2 SXJ3 but not on ios 15.x. Did not understand why cisco has descoped this command.
monitor session 10 type erspan-source
shutdown
source cpu rp rx (--- 15.0 has no such option on 6500 )
destination
[code]....
View 2 Replies
View Related
Feb 22, 2011
I have configured my Cisco 881 and it is quite stable but now I am working on some minor details.
I have several Public WAN IP addresses which are NATing to internal web server. When I go to the WAN IP at port 80 from the Internet, the NAT works fine and it maps perfectly to the internal Web server. However, when I try the same same WAN IP from the LAN which contains the web server, the Router blocks the traffic and I get nothing back.
I have verified that I can get to the Inernet from the LAN but it seems that I cannot go bfrom the LAN to the Internet and back into the LAN via NAT.
View 2 Replies
View Related
Oct 18, 2012
we use the latest LMS version (4.2.2). Under Monitor->Performance Settings->IPSLA->Devices i see all devices. When creating a IPSLA collector not all devices are listed in the source section but in the target section. Why is this happening?
View 2 Replies
View Related
Jun 8, 2012
I need to change the source IP of a packet for one of my NAT's.I currently have an Cisco 1812.I have an PPPoE connection as Dialer 0.I have another VLAN that is connected to an Netscreen SSG5 VPN gateway via another Cisco switch.I have a vlan trunk between the switch and the 1812. What I would like to achive is the following :-For any traffic going to the following three ranges make it apear as if it was coming from the VLAN50 address [code]I can ping my netscreen on 10.27.30.255 fine from the Cisco 1812. But any other PC fails, as for some reasion the traffic has a source of my Dialer 0 interface.How can I write a nat to change the source just for the tree destitnations ?
View 7 Replies
View Related
Jun 6, 2012
I have router which has two physical interfaces Gi0/0 and Gi0/1. G0/0 connects to metro over ethernet and Gi0/1 is configured a s router on a stick, which has many defined. All those interfaces have IP addresses assigned. EIGRP is configured between other metro sites. Here is a sample IP assigment for this site, let's say Site.
View 3 Replies
View Related
Mar 5, 2012
So I use Shaw as my ISP, with the dlink DIR-655 as my router.Originally I was using the DPC3825, and started noticing some nasty signal fluctuations on my phone and wii (would go from 5 bars to 1 bar, causing netflix to drop out, games to disconnect, phone browsing to stop completely, etc) which is why I bought the DIR-655. I have been looking for sources of RF interference.I do not own a microwave, all the electrical work in this house is brand new, I have no neighbors (live in middle of a forest). I have tried positioning, every wifi channel, building an aluminum satellite dish to direct the signal where I want it to go. I've had it in every room in the house, I've unplugged the fridge and all other RF electronics (cordless phones, etc), and the issue remains.
So what the heck is going on here? Does my house hate wifi signals?I was thinking maybe dirty power, but my house has emergency power batteries that run 24/7. Any dropouts or flickers aren't even noticed by the system. url...This is a picture of the path between the router and my roku box/wii/phone.The router is 1 inch below the camera screen, and the roku box is in the far room. it's 30 feet.what can cause severe fluctuations at 30ft?
View 6 Replies
View Related
Feb 20, 2013
Some network pros have setup our Cisco 3620 many years back during implementation.
I've just added a new server, with new ip, wanted to change the ip of ip nat translation in this router.
I did a show run, the config is this;
interface FastEthernet0/0
ip address 57.31.132.116 255.255.255.240
no ip redirects
[Code]......
View 5 Replies
View Related
Apr 1, 2012
I have an 1811 with 2 WAN connections, Fiber and ADSL (both Ethernet). I'm having a heck of a time getting traffic out the ADSL link.As it stands, I can ping the next hop 75.158.58.1, but no further. ping source FastEthernet1 times out to any external address nor can I NAT internal subnets out the interface.I'm really at a loss as to why, especially since I can ping
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
[code]...
View 2 Replies
View Related
Apr 16, 2012
I have a internal subnet 192.168.3.0/24 sitting behind an ASA firewal 8.2 and would behind accessing to web server 192.168.11.54 which sits behind the outside interface of the ASA firewall.The access would be like this:
1) 192.168.3.0/24 will be accesing to the web server http://192.168.11.54
2) We would like to translate the source 192.168.3.0/24 to the firewall outside IP address
3) We would like to translate the destination web server 192.168.11.54 to 202.90.197.146 as well
How to perform this simultaneous source and destnation address translation in ASA firewall 8.2? Could this be done in ASA firewall 8.2?
View 1 Replies
View Related
Aug 27, 2012
I am getting input errors/runts on 2 of my gigabit interfaces that connect to our WAN service provider's network. In relation to total packets, its not a large number, so its probably not a big deal, but I'd just like to find the source so I stop seeing the errors in Solarwinds. Our service provider says that they don't see any errors on their side, but the errors are incoming to us.
I've tried to capture the traffic with Wireshark, but discovered that often these packets are either discarded or padded by NICs so Wireshark will not see them, or at least will not see them as undersized.
Is there any other way I can capture these packets so I can find the source and figure out how to stop them? Our equipment is 3750G running 12.2(55)SE. Its not a trunk port. I know there was a bug in prior IOS that would cause some frames to be marked as runts even though they were forwarded successfully.
View 3 Replies
View Related
May 6, 2012
I need to open a port in a Cisco 2911 router to permit the conexion to an equipment that is inside the LAN, but I my configuration doesn't workt.
I have 3 interfaces configured: two WAN interfaces (one is a backup of the other) and a LAN interface. The configuration is this (public IPs are changed):
track 1 ip sla 1 reachability
!
!
interface GigabitEthernet0/0
description backup
ip address 176.55.25.25 255.255.255.252
ip nat outside(code )
View 16 Replies
View Related
Nov 5, 2012
We have a SRP527W, we have created VLAN for DATA and VOICE remotly connected to an office by VPN.
VPN is working fine.
Now we want to register SIP lines integrated in SRP527W to a Cisco Call Manager located in our office.
The problem is that the source of SIP packets is WAN interface of the SRP527W, so packet wont pass in the VPN. Is possible to change the IP source of the SIP registration ? The most useful will be to set the IP source SIP on the voice VLAN.
View 2 Replies
View Related
Oct 29, 2012
Does ASA 8.4.3 check the source IP address of a DNS reply and drop it if the reply address is different to that in the query?
Customers DNS server does this due to a recent change, their server now has a virtual address, but replies are sent from its physcial address. This is temporary. Their PIX is happy with this.
Replace the PIX with the ASA, DNS fails, the only reason I can see is due to the way their internal DNS operates.
View 1 Replies
View Related
Jun 12, 2011
I have a Cisco ACE with a server farm "intranet" with real servers rsrv1 and rsrv2 (round robin) and i have two sites A (IP Address A) and B (IP Address B) in the WAN. I want to that Site A conect to ACE 4710 via VIP, but this connection will be to srv1 and Site B conect to ACE 4710 via VIP, but this connection will be to srv2.
View 3 Replies
View Related
