Connecting Two Networks Via VPN?

Feb 14, 2011

I've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.

View 1 Replies


Connecting Two Networks Via WAN?

Aug 15, 2011

We have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.

Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.

View 6 Replies View Related

Connecting Two Different Networks On Different ISPs?

Apr 21, 2012

I have a network connected to Verizon FIOS via Actiontec MOCA / router.I also have a network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem. Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.What is the best configuration to allow devices on network to communicate with devices on the network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?

View 10 Replies View Related

Connecting One Printer On Two Networks?

Jul 1, 2012

So basically I need to hook up a HP LaserJet P2015 to a business and home network. LaserJet P2015 user guide. I would like to keep the printer's ip static so it will stay the same on each network individually. am using a business router (Linksys RV120 W Wirless-N VPN Firewall) with two VLAN (business and home network) built using this router. Also I have two access points both being used to expand this signal through out the building, but not as an extender. They are two Linksys WAP54G access points. The access points are used to expand the home network, and not the business network.

View 1 Replies View Related

Connecting Multiple Computers Through Different Networks?

Jan 11, 2012

I have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.

View 3 Replies View Related

Connecting To Isolated Networks With The Same Network Id

Nov 24, 2011

Basically, the issue I am having is we have a class b network ID of 172.16. We had a new phone system installed last year which needed to be on an isolated network as our switches do not have QoS on them. Plus they are quite bad...

Some genius decided to use the same network ID on the new phone system as our current network but they are totally isolated networks.

This is where my laziness comes into play... We use a laptop connected to the phone system's network to connect to configure the phones etc but I would like to do this at my desk. So what I have done is configured a wireless access point on the phone systems network so I can connect to it on my laptop to theoretically make changes to the phone system on my PC, but also staying connected to our network for obvious reasons... I do have some networking knowledge, and I am assuming the routes are going to be completely wrong because of the same network ID issue not allowing me to connect to the phone system on my laptop. But I am not sure if I can add a static route to resolve this.

Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8


View 1 Replies View Related

Connecting Two Wireless Routers On Different Networks?

Jun 16, 2011

i have two linksys wireless router on different networks that i want to connect. how do i go about it?

View 1 Replies View Related

Connecting Automatically To Open Networks?

Sep 12, 2011

My boss's old Windows XP laptop was able to connect to open wireless networks automatically so he never had to click that icon on the bottom right to check signals or anything like that. Is there anything like that I could set up on Windows 7?

I realize that this is not secure and very silly. I suggested choosing the best and trusted networks available. My boss, however, doesn't want to accept that he should have to go through more steps with newer technology. So in this case, I'd just like to give him what he's asking for.

View 1 Replies View Related

D-Link DAP-1522 :: Multiple Networks Connecting To It?

Jan 9, 2011

Adding a second DAP-1522,  They have 1 DAP-1522, they set that up useing the WAP(button on the side),  This one is running in the frontroom of the house and the 2nd bridge will be running in the bedroom of the house.She has tried to click on the WAP button on both Dap-1522's and then the router to sync but thats not working, from what we can tell.   I think I will need to manually config them now that a second one has been introduced.the frontroom Bridge is, but we cant find the ipaddreess for the second dap-1522 at this time.  So question to all, if I can - Is there a way to identify all of the Dap-1522's on the network or anything that is connected on the network. as the DIR-655 is only showing 2 things connected?Right now I wish she would have listened too me and had her house wired for ethernet when the house was being built.

View 1 Replies View Related

DIR 655 - Connecting Two Routers Together And Keeping Networks Separate

Jul 31, 2012

I have two dir655 routers that are connected. The second router is not setup as a wireless access point, but I am open to that if it will work. The second one is going to serve as a public wifi in a business, with a separate SSID. The first one is going to handle the local business network, with its NAS and printers. How would I prevent the public wifi from accessing the first router?

I have tried the guest wifi partition setting, however it still allows access to the lan devices on the first router. It does partition with the second router properly though, but thats not worth anything to me cause there are no lan devices on the 2nd router.

Would it work right if I turn the 2nd router into a access point, disable the dhcp server, and set it up with the guest wifi partition?

View 19 Replies View Related

Linksys Wireless Router :: WRT54G Connecting Two Different Ip Networks?

Jun 6, 2012

We are running our internal network on the 192.168.1.x range.
We have just installed a new control system which is running on a closed 192.168.0.x network (no internet access).
What we need to do is use the WRT54G to connect the 2 networks together so that we can VNC into one of the computers on the control system network so that it can be managed.
I have tried connecting the two networks by plugging the 192.168.0.x network into the WAN/Internet Port on the WRT54G, and setting the "Internet Connection Type" to "Static IP" and setting the "Internet IP  Address :" as (the main PC I need to VNC into) but cannot ping any of the other computers..

View 7 Replies View Related

Belkin Routers :: Connecting To Two Networks With Play Max N600 HD

Jun 2, 2013

Play Max N600 HD (F7D4301) Dual network operation - on behind Belkins firewall. I have just changed the structure of my network for reasons of additional services being added. I now have in the front room the ADSL modem connected to a switch and 2 PC's. The switch is also pbugged into an ethernet plug in the wall which feeds to the other end of the house where the Belkin router is. I have all devices working on the internet correctly. The issue is getting access between the two networks and the devices on the two networks. I have added the ip addresses of the PC's to the router's LAN/Static Route, but that didn't work. The network in front room (after ADSL Modem is 192.168.1.x and after Belkin router it is 192.168.2.x. Is there a way I can allow access between the two networks between devices?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 Connecting 2 Internal Networks?

Nov 7, 2012

We recently changed locations and acquired a new circuit from our provider. They also connected our remote branch office to our main office through MPLS. Now, as I understand it, the branch office basically connects back to the main office through our providers network (MPLS). We have a new router at the branch office which has a gateway of The clients in that office have IP's of - 100, using the gateway of
The main office network is (Gateway of
At this end (Main office), I also have a new Cisco 2900 provided by the ISP, with port 0/0 for the outside connection (connected to the 0 port on my ASA 5505). The ASA's port 1 obviously running into my network hub. The provider tells me that port 0/1 on the 2900 is or should be used to connect the branch office back to here and has an IP of, as that's how the provider provisioned it. So, I plug that into the ASA's Ethernet port 0/2. And I'm assuming they have a route setup either on the 2900 or the router in the branch office so that can reach me here at
There is already a static route setup on the ASA: ( 1). As soon as I plug in the cable, the IP phones at the branch office work, but they can't access the internet or any resources in the main office. My questions are:
1. Shouldn't I be able to just go straight from the 0/1 port on the Cisco 2900 to my hub. At first I was plugging right into the ASA, but I don't think I need to do that, why go from the branch office through my ASA to access resources and then back out the ASA for internet. If they're already coming from, through the MPLS network, then they should go right to my network and then back out the ASA.
2. They have to route through the ASA first, in which case, do I need to setup another VLAN for that branch network in conjunction with a static route? I can ping the router and hosts in the branch office through the ASA only!
Below is the running sanitized config:
Result of the command: "show running-config"
: Saved:ASA Version 8.2(2) !hostname ciscoasadomain-name audiology.orgenable password ulzaQiFnKVzDwUmW encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address ospf cost 10!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!boot system disk0:/asa822-k8.binftp mode passiveclock timezone EST -5clock summer-time EDT recurringdns server-group DefaultDNSdomain-name audiology.orgsame-security-traffic permit inter-interfacesame-security-traffic permit intra-interfaceaccess-list


View 16 Replies View Related

Dell XPS Is Not Connecting To Network / No Wireless Networks Found In Range

Apr 7, 2011

My Dell XPS (Windows XP) is not connecting to my network..can't get anything to show up on the networks in range list. My other laptop is fine. But I just upgraded to Firefox 4 on the Dell, and then the connectivity went askew.

View 2 Replies View Related

Cisco Wireless :: AP1100 - Android Not Connecting To Protected Wi-Fi Networks

Oct 9, 2012

I've found that Android devices (smartphones for sure, and perhaps other devices, like Windows Vista/XP pc's with some Atheros wi-fi adapters) can't connect to our eduroam network (WPA2 Enterprise) if the Access Points (all from Cisco) also have open SSID's configured in it. Once I protect the open networks with, for instance, WPA-PSK, the Android  devices  immediatly get connected to the eduroam. Is there any fix that can be applied to the Access Points. Below there's a list fo AP models and IOS version we have running. I may mention that this problem doesn't occur with Access Points from other manufacturers like, for instance, Meru Networks.
In the AP's event log appears the folowing:
"Packet to client 0026.3778.081f reached max retries, removing the client"
The steps to mitigate the problem above were applied, but with no results.

PS: The Android versions may vary with the same symptom.
Device types: AP 1100; AP 1130; AP1140;AP1210;AP1250

View 19 Replies View Related

Dell :: New Inspiron 1764 - Low Signal Connecting To Wireless Networks?

Jun 28, 2010

I have a brand new Dell Inspiron 1764 laptop that I received on the 25th of June. It is "replacing" a Dell Inspiron 9100 that has gotten to be too slow and bulky for my needs. For support purposes, both laptops are running on Windows 7.Overall, I love my new Inspiron 1764. However, I have noticed seriously degraded connection/signal strength with the wireless card (Dell Wireless 1397 WLAN Mini-card) compared to my Inspiron 9100 (Dell Wireless 1350 WLAN Mini-PCI card).

In areas of my house that my 9100 can get full signal strength (5 bars), my new 1764 is getting 2 or fewer bars. This behavior is also not limited to only my house, as I have tested it at my job and in an area less than 10 feet away from the wireless router, I have "Internet connectivity problems".

I tried twice this morning to speak with Dell support. The first person I spoke at least initiated a DellConnect session with me so that they could check some of my settings and such (however, why they went twice into my sharing settings I could not determine since they have absolutely nothing to do with signal strength.)

Unfortunately, I was disconnected from the session when I went to an area that had less signal than right next to my wireless router.I then got back on chat support with Dell and received another technician to speak with. I explained my problem, told them that I was in a DellConnect session with the other technician, and they looked up my support contract.They then told me that my warranty does not cover software issues and referred me to the software department and told me it would be an extra charge. I told them that I did not believe it to be a software issue in any way, shape, or form. They told me that it must be a setting issue. I have since spent several hours scouring the internet forums on Dell and other websites checking people who have had similar issues. Some of their issues were admittedly from software settings, but I have still yet to find anything that indicates to me that I have an incorrect software setting.

As of this writing, I am standing in my kitchen, typing on my Inspiron 9100 with a full 5 bars, while my Inspiron 1764 sits next to me with a measly 2 bars, and I am literally standing 7 feet above the room that houses my Linksys WRTU54G-TM router.Personally, I suspect a faulty wireless card, but how do I convince Dell to hear my case and replace it rather than trying to bilk me for unneeded software support?

View 16 Replies View Related

Cisco WAN :: Connecting Internet To Networks Connected To Router 2811

Feb 7, 2011

I have a big issue in providing internet service to the networks that are connected to a router. Also i do wanna know whether ipv6 can be used in 2811 routers.

View 2 Replies View Related

Motorola VT2442 Router / SB6121 Cable Modem - Connecting Two Networks?

Apr 22, 2012

I have a network connected to Verizon FIOS via Actiontec MOCA / router. I also have a network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.

Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.

What is the best configuration to allow devices on network to communicate with devices on the network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?

View 6 Replies View Related

Linksys Access Point :: Wet610n - Connecting Device To Certain Wifi Networks

Mar 4, 2013

I am having trouble connecting my device to certain WiFi networks. We work with hotels and we have a handful of devices that are just not able to connect to their network. Te device works fine in my office. When I get to the Setup page and do a site survey, it'll get to 100% and then display a "page can't be found" as oppose to showing me that it has been connected. We had the MAC address cleared in their network and still no luck. Firmware has also been updated.

View 7 Replies View Related

Cisco VPN :: E4200 - Connecting To Local LAN After Connecting To AnyConnect Secure

Apr 1, 2012

I connect to my corporate network using Cisco AnyConnect Secure Mobility Client.  Once connected I can no longer print to my LAN attached printer and other local resources.  I use the Cisco/Lyncsys E4200 router on my LAN and can re-connect to the storage on the local LAN by setting up Port Forwarding of port 21 and MS Windows FTP folder sharing.  However, I can't seem to connect to a Terminal Services client by forwarding port 3389.  Is there a way to connect to the local LAN after logging into the VPN connection.  I can connect to regular HTTP/HTTPS sites and most other type of connectiins, just not my own local resources. 

View 3 Replies View Related

Two Networks But Same Ip

Apr 1, 2012

My dad has a business he runs on our network that everyone in the house uses for general needs. I am a gamer and often want to host servers for my friends. This requires that I have ports opened on the router, which I cannot do as I don't have access to change the network. Is it possible to create 2 networks on the same ISP, and if so how would you do it?,I have my current network running on an Apple Time Capsule with AirPorts around my house acting as extenders.

View 5 Replies View Related

Two Networks Instead Of One?

Jan 3, 2013

So I moved my modem & router upstairs and for some reason my home network doesn't connect to the internet but I can set up a separate connection. Seems wrong....should just be one. (And my internet connection bars in the bottom corner have an exclamation mark. Is it because this computer was on the network wirelessly and now it isn't?) Was going to just reset the router.

View 4 Replies View Related

Merging Of Two Networks

Aug 16, 2011

data card n a cable network at same time?

View 2 Replies View Related

Two Separate Networks On One PC?

May 1, 2011

I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.

View 2 Replies View Related

Won't Connect To Certain Networks?

Sep 10, 2012

This has me baffled: since the weekend I've been unable to connect to certain networks. Previously I could connect to any available network as normal, but all of a sudden I can't get onto certain network connections despite the fact they are available and at full signal strength. Some connections are fine, others are not.Something odd happens when I unsuccessfully try to connect: a window pops up but in the blink of an eye disappears again before I have time to register whether it's an error message or what.I've checked for Window updates and am fully updated, I've run my virus scan (Microsoft Security Essentials), and I've performed Windows Network Diagnosis to no avail.otel overseas and am now feeling the problem as I can't get onto the hotel's free wifi and am having to use my iPhone as a personal hotspot which is costing me a bomb

View 4 Replies View Related

Can't Connect To LAN Networks

Sep 2, 2012

Recently, I upgraded my PC into basically a completely new machine. Because the harddrive that I planned on using was IDE, and my IDE-Sata adapters weren't being recognized on BIO, I used a fresh sata harddrive and a copy of Windows XP Professional.

It booted fine, all parts recognized, only now I cant connect to any LAN networks. I only get the option for VGN, Broadband and Dial-up networking. Using a laptop at the moment

I've tried two different usb adapters, and connecting the LAN cable directly into the PC. The cable works on another desktop in the house, but my PC wouldnt let me make the LAN network.

View 1 Replies View Related

Configuration To Keep Other Networks Out

Dec 26, 2011

I've had my Westell wired to my PC forever--well, for a couple of years--and I just got my wife a tablet.How to configure it/set up,my wireless network in a smart way that will keep others out. I see a WEP on the bottom, but... I kinda dumb about these things.I know there's a Wizard available in my XP control panel.

View 2 Replies View Related

Configure Four Different Networks Using One ISP?

Aug 23, 2012

I have a one ISP connection which is connected through �US_Robotics_Modem�. By default its Ip address is and Iam running a DHCP start from to This is my first and main Network.Now I want to configure different Four networks using the same ADSL connection. For example:

Main Network Ip:,
Second Network:,, DHCP starts from to


How can I connect Internet on all others Networks using the Main Network?

View 1 Replies View Related

Link Two Networks Together

Jul 3, 2011

The laptop can access either the internet wirelessly – via the internet connected router OR the nas wirelessly – via the second router. [have to change the wireless network that it attaches to.The laptop can also access the desktop, regardless of which of the 2 wireless networks i attach to.My question is, how do i set up my network more efficiently to enable access to all parts of it and the internet simultaneously from the laptop via wireless?

View 5 Replies View Related

How To Connect Two Different Networks

May 15, 2011

I have two router as well as two switch. 1st router is Dlink's router, I used this router for sharing files and folders and also connect to NET. And 2nd router used for Windows Media Encoder to upload my audio data to other computer.My first router is connected with a 16 port DLink switch, and also 2nd router is connect with another 8 Port Dlink router. Now, 1 computer has two LAN card and it connect with both router through switch. But both is not working at a time, but if i disable one LAN another is worked and vice versa.

View 2 Replies View Related

New PC Can't Connect Any Networks?

Jul 4, 2012

my pc just arrived this morning.. Booted it up, installed windows. All good. On the desktop now, and can't connect to my home network.. In fact I can't connect to any networks.. Windows tells me there are none available, but i'm using my laptop right next to my pc and there should be at least 5 connections including mine..

I DO HAVE a wireless card in there... but is there something you need to do to like activate it / turn it on? I can see the card listed in device manager.. it says it is working properly. Just can't connect to anything!

All i wanted to do was do some browsing on my new pc but looks like I will have to wait.

View 2 Replies View Related

Multiple NIC's - Two Networks?

Feb 14, 2012

I am having trouble setting up two networks.Basically, i want one 'private' network and one public network. The problem is, the private network can't access the internet.(Network 2)

Network 1(Public) works fine as i don't want them to access Network 2.Here's how it is setup.

Router/Modem (Network 1)
Server NIC1
Server NIC2
Switch - (Network 2)

Network 1 can access the internet and shared files on the server.

Network 2 can access Shared files on the server (which is what i want) but cannot access the internet.

Router/modem IP is subnet

Server NIC 1 IP is subnet
Server NIC 2 IP is subnet

How can i get computers in Network 2 to access internet?

View 5 Replies View Related

How To Connect 2 Networks

Jan 3, 2012

I purchased a network storage device and would like every one i the house to be able to access it.I have attached a small diagram on how everything is connected.The modem given to me by my ISP has only 2 lan ports i can use(lan1 and Lan2)This modem is configure with the IP range 192.168.2.XXXOn this i have connected a netgear router and have configured it with the internal network IP range 192.168.1.XXXOriginal i had ALL PC's and devices connected to this router and everythign worked fine, but when using download software i.e. P2P the speeds would cause the router to crash and i had to go and power restart it to work. Becuase of this i connected MY PC directly to my ISP's modem so i dont keep crashing the router.

This all works fine, but i recently purchased a network storage drive that i would like every one to have access in the house.Becuase the Storage drive and my PC are on the IP range and everything connected to the router is on the IP range how can i give everyone access to the storage drive ??I know if i reconnect my PC and drive back on the netgear router it will work but i cant do that becuase of the location and becuase of the original issue of when downloading on my PC it would block the router.

View 7 Replies View Related

Copyrights 2005-15, All rights reserved