Two Networks But Same Ip
Apr 1, 2012
My dad has a business he runs on our network that everyone in the house uses for general needs. I am a gamer and often want to host servers for my friends. This requires that I have ports opened on the router, which I cannot do as I don't have access to change the network. Is it possible to create 2 networks on the same ISP, and if so how would you do it?,I have my current network running on an Apple Time Capsule with AirPorts around my house acting as extenders.
View 5 Replies
ADVERTISEMENT
Jan 3, 2013
So I moved my modem & router upstairs and for some reason my home network doesn't connect to the internet but I can set up a separate connection. Seems wrong....should just be one. (And my internet connection bars in the bottom corner have an exclamation mark. Is it because this computer was on the network wirelessly and now it isn't?) Was going to just reset the router.
View 4 Replies
View Related
Aug 16, 2011
data card n a cable network at same time?
View 2 Replies
View Related
May 1, 2011
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies
View Related
Aug 15, 2011
We have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.
Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.
View 6 Replies
View Related
Sep 10, 2012
This has me baffled: since the weekend I've been unable to connect to certain networks. Previously I could connect to any available network as normal, but all of a sudden I can't get onto certain network connections despite the fact they are available and at full signal strength. Some connections are fine, others are not.Something odd happens when I unsuccessfully try to connect: a window pops up but in the blink of an eye disappears again before I have time to register whether it's an error message or what.I've checked for Window updates and am fully updated, I've run my virus scan (Microsoft Security Essentials), and I've performed Windows Network Diagnosis to no avail.otel overseas and am now feeling the problem as I can't get onto the hotel's free wifi and am having to use my iPhone as a personal hotspot which is costing me a bomb
View 4 Replies
View Related
Feb 14, 2011
I've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Sep 2, 2012
Recently, I upgraded my PC into basically a completely new machine. Because the harddrive that I planned on using was IDE, and my IDE-Sata adapters weren't being recognized on BIO, I used a fresh sata harddrive and a copy of Windows XP Professional.
It booted fine, all parts recognized, only now I cant connect to any LAN networks. I only get the option for VGN, Broadband and Dial-up networking. Using a laptop at the moment
I've tried two different usb adapters, and connecting the LAN cable directly into the PC. The cable works on another desktop in the house, but my PC wouldnt let me make the LAN network.
View 1 Replies
View Related
Dec 26, 2011
I've had my Westell wired to my PC forever--well, for a couple of years--and I just got my wife a tablet.How to configure it/set up,my wireless network in a smart way that will keep others out. I see a WEP on the bottom, but... I kinda dumb about these things.I know there's a Wizard available in my XP control panel.
View 2 Replies
View Related
Aug 23, 2012
I have a one ISP connection which is connected through �US_Robotics_Modem�. By default its Ip address is 192.168.1.1 and Iam running a DHCP start from 192.168.1.2 to 192.168.1.254. This is my first and main Network.Now I want to configure different Four networks using the same ADSL connection. For example:
Main Network Ip: 192.168.1.1, 255.255.255.0
Second Network: 192.168.2.1, 255.255.255.0, DHCP starts from 192.168.2.2 to 192.168.2.254
[code]....
How can I connect Internet on all others Networks using the Main Network?
View 1 Replies
View Related
Jul 3, 2011
The laptop can access either the internet wirelessly – via the internet connected router OR the nas wirelessly – via the second router. [have to change the wireless network that it attaches to.The laptop can also access the desktop, regardless of which of the 2 wireless networks i attach to.My question is, how do i set up my network more efficiently to enable access to all parts of it and the internet simultaneously from the laptop via wireless?
View 5 Replies
View Related
May 15, 2011
I have two router as well as two switch. 1st router is Dlink's router, I used this router for sharing files and folders and also connect to NET. And 2nd router used for Windows Media Encoder to upload my audio data to other computer.My first router is connected with a 16 port DLink switch, and also 2nd router is connect with another 8 Port Dlink router. Now, 1 computer has two LAN card and it connect with both router through switch. But both is not working at a time, but if i disable one LAN another is worked and vice versa.
View 2 Replies
View Related
Jul 4, 2012
my pc just arrived this morning.. Booted it up, installed windows. All good. On the desktop now, and can't connect to my home network.. In fact I can't connect to any networks.. Windows tells me there are none available, but i'm using my laptop right next to my pc and there should be at least 5 connections including mine..
I DO HAVE a wireless card in there... but is there something you need to do to like activate it / turn it on? I can see the card listed in device manager.. it says it is working properly. Just can't connect to anything!
All i wanted to do was do some browsing on my new pc but looks like I will have to wait.
View 2 Replies
View Related
Feb 14, 2012
I am having trouble setting up two networks.Basically, i want one 'private' network and one public network. The problem is, the private network can't access the internet.(Network 2)
Network 1(Public) works fine as i don't want them to access Network 2.Here's how it is setup.
Internet
|
Router/Modem (Network 1)
|
Server NIC1
Server NIC2
|
Switch - (Network 2)
Network 1 can access the internet and shared files on the server.
Network 2 can access Shared files on the server (which is what i want) but cannot access the internet.
Router/modem IP is 10.10.1.254 subnet 255.255.255.0
Server NIC 1 IP is 10.10.1.252 subnet 255.255.255.0
Server NIC 2 IP is 10.10.1.251 subnet 255.255.255.0
How can i get computers in Network 2 to access internet?
View 5 Replies
View Related
Jan 3, 2012
I purchased a network storage device and would like every one i the house to be able to access it.I have attached a small diagram on how everything is connected.The modem given to me by my ISP has only 2 lan ports i can use(lan1 and Lan2)This modem is configure with the IP range 192.168.2.XXXOn this i have connected a netgear router and have configured it with the internal network IP range 192.168.1.XXXOriginal i had ALL PC's and devices connected to this router and everythign worked fine, but when using download software i.e. P2P the speeds would cause the router to crash and i had to go and power restart it to work. Becuase of this i connected MY PC directly to my ISP's modem so i dont keep crashing the router.
This all works fine, but i recently purchased a network storage drive that i would like every one to have access in the house.Becuase the Storage drive and my PC are on the IP range 192.168.2.xxx and everything connected to the router is on the IP range 192.168.1.xxx how can i give everyone access to the storage drive ??I know if i reconnect my PC and drive back on the netgear router it will work but i cant do that becuase of the location and becuase of the original issue of when downloading on my PC it would block the router.
View 7 Replies
View Related
Apr 24, 2011
i noticed this morn that my LAN has disappeared from my networks. just leaving my tplink wireless adapter, but have a network card in pc, but it has disappeared from device manager as well, but when plug in the modem it lights out, but still nothing, still nothing in device manager, using win 7 32bit actually i have 2, an on board one as well, but both missing
View 3 Replies
View Related
May 11, 2012
I have two networks that are on two different IP ranges, sharing an ADSL internet router.I can make the two networks access the internet through a Windows 7 PC acting as a router with two NICs, but I cannot print to a shared network printer (build in NIC in the printer).This is how it looks.
ADSL router IP:
IP address: 10.10.10.253
Subnet Mask: 255.255.255.0
Network A computers:
IP range of: 10.10.10.XXX
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.10.253
[code]....
Note: All the computers can access the internet just fine, it's only the one set of computers on IP range 172.16.0.XXX that cannot see the printer.All computers are Windows 7 32bit Professional.
View 2 Replies
View Related
Feb 14, 2011
I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other. I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Aug 23, 2012
I have two wifi networks in my home, 1 has the internet wifi signal and 2 is my personal network. How can I use the internet signal from one whilst staying connected to my own network.the net sifi signal is from a virgin media superhub, and my personal wifi network is using an asus rt-n65u which has a wds mode not sure if this
View 9 Replies
View Related
Aug 30, 2011
Explain the risks of not using multiple networks on a 300 host LAN
View 1 Replies
View Related
Apr 13, 2012
Our church has two internet connections, one that the internal network accesses and one that the wireless network in the building accesses. For (obvious) security reason we need to keep the networks isolated from eachother. On sunday's when we upload the sunday sermon video recording we caused a network lag for other computers on the network, thus the church has asked us to use the wireless network to upload the videos. We record the video on one computer, then can transfer it to a Mac that has 2 network cards.
How do we isolate the two networks from eachother without plugging and unplugging cables and have the Mac upload through the wireless network instead of the wired network?
View 1 Replies
View Related
Dec 14, 2012
*-my router is a sonicwall nsa 2400. (ip: 192.168.0.7)
*-my network adresse is : 192.168.0.X /255.255.255.0
*-all computers in my network are using stat ips (not my fault, and i can not change this fact).
Question: Can i add a new network range (not physical wires ) in this router expl 192.168.1./255.255.255.0 X with DHCP,and link it to 192.168.0.X so two computers in this differents networks range can talk to each others ?
View 3 Replies
View Related
Apr 2, 2012
how can I connect two networks together with the same subnet to have access to tne internet?
View 2 Replies
View Related
Jul 7, 2012
I have a Video Management Software on a single server with two Gb Eternet ports. One port is addressed !0.179.41.XXX and the other is 192.168.0.XXX. Bringing video on only one network is fast. Bring both in and the server is having issues with connectivity. Would a SOHO Router solve the problem? What brand or model would you recommend?
View 6 Replies
View Related
Nov 25, 2011
I have 3 computers running XP, one running Windows 7 and 3 smart phones all connecting to a Netgear JWNR2000v1 Wireless- N 300 Router. All of them connected fine until about a month ago the XP machines all started having problems, until finally none of them would connect or could even detect the router at all. The smart phones and Windows 7 computer have never had a single problem connecting. My daughter has tried to use one of the XP machines at some coffee shops with no success, I assume they are "N" networks. I pulled out an old "G" router and they can all connect to that one without a problem. The XP machines are all different, one Compaq, one Dell, and one Toshiba. None of them have any detectable viruses, using Eset and Windows Security Essentials.
View 1 Replies
View Related
Nov 17, 2012
All of a sudden my laptop will not see, much less connect to any networks.I've updated, uninstalled and reinstalled drivers, set BIOS to the default, turned the wireless switch on and off (FN F8 does nothing,) virus checked, trouble shot via windows, etc. I gave up and got a USB wireless dongle and it can't find any networks either! Yes, there are networks available via my router and the USB works on another machine. Both devices show up in DEVMGR with no warnings. Ethernet works fine, that's how I'm now connected.I can do a system reload but I'm hoping not to. It's gotta be software for both devices to not function.?
View 2 Replies
View Related
Jul 7, 2011
different levels of security in networks
View 2 Replies
View Related
Apr 20, 2012
I have a wireless lan and a USB Modem Can I use Both at the same time to download two files each file on a lan
View 1 Replies
View Related
Apr 21, 2012
I have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router.I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem. Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
View 10 Replies
View Related
Jul 6, 2011
how to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies
View Related
Aug 3, 2011
i have have lan in the office(internet installed) and i want to combine it with the lan in the computer lab for internet .i dont want to use cable as it might be too long .
View 1 Replies
View Related
Aug 22, 2011
I have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies
View Related
Oct 29, 2011
My PC usually shows me a list of wireless connections when i click on that icon.Today, however, it is not showing the list and displays the following message instead:'windows cant configure this wireless connection.' no list, so i am not able to connect to my network.i tried setting up a wireless network through wizard but to no avail. I dont know why this is happening. i got a new wifi modem. i cant even blame the new connection alone, because before that my pc at least used to show other inaccessible wireless networks in the list. but today it shows nothing.i have a windows xp.
View 1 Replies
View Related
