Link Two Networks Together
Jul 3, 2011
The laptop can access either the internet wirelessly – via the internet connected router OR the nas wirelessly – via the second router. [have to change the wireless network that it attaches to.The laptop can also access the desktop, regardless of which of the 2 wireless networks i attach to.My question is, how do i set up my network more efficiently to enable access to all parts of it and the internet simultaneously from the laptop via wireless?
View 5 Replies
ADVERTISEMENT
Jan 25, 2011
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
View 3 Replies
View Related
Sep 6, 2011
I have a Sky broadband router downstairs which has wired and wireless links to workstations downstairs. I have a wired network upstairs in my study. I want to put a router into the study that will link wirelessly to the Sky router downstairs and link the wired workstations to the broadband.
View 1 Replies
View Related
Sep 22, 2011
Why can't I see any available wireless networks on wireless d-link DWL-G510?
View 2 Replies
View Related
Mar 10, 2012
I have a DCS-930 running successfully on my home network. Now I want to set up a DCS-932 on a different network at my mother's house in another city, so I can monitor her house from a distance. Questions:
1. After installing, will I be able to see both cameras at mydlink.com if they are on different networks?
2. Is installation any different because there are 2 networks?
3. Can I use the existing install wizard on the laptop that I used with the 1st installation or should I use my mother's PC?
4. How do I get started since the first instruction is to insert and use the CD that came with the new camera?
Basically I want to know what the install procedure is if I am using a different network but the same laptop I used with the 1st one. The laptop has a wireless connection to both networks.
View 3 Replies
View Related
Feb 17, 2012
I have two separate wired networks. Network 1 has a wireless router (an adsl modem). Router of the Network 2 is not wireless. Can I replace router of network 2 with DIR-600 to make a wireless connection between these two network segments ?
View 5 Replies
View Related
Jan 9, 2011
Adding a second DAP-1522, They have 1 DAP-1522, they set that up useing the WAP(button on the side), This one is running in the frontroom of the house and the 2nd bridge will be running in the bedroom of the house.She has tried to click on the WAP button on both Dap-1522's and then the router to sync but thats not working, from what we can tell. I think I will need to manually config them now that a second one has been introduced.the frontroom Bridge is 192.168.0.50, but we cant find the ipaddreess for the second dap-1522 at this time. So question to all, if I can - Is there a way to identify all of the Dap-1522's on the network or anything that is connected on the network. as the DIR-655 is only showing 2 things connected?Right now I wish she would have listened too me and had her house wired for ethernet when the house was being built.
View 1 Replies
View Related
Nov 20, 2011
What device would be necessary to link two networks of identical type? What devices would be necessary to link two networks of dissimilar types?I would say a network card and HUB for identical type but I do not know if this is correct?Describe the parameters governing the choice of cable type for a given network. What are the three main types of cables used in computer networks?
View 3 Replies
View Related
Dec 31, 2012
Having trouble with the TP-Link WN722N that I bought from Newegg. It doesn't show any networks on my desktop that runs on Win7. Took the drivers straight from the CD. It works fine on my other laptops and desktop.
View 4 Replies
View Related
Aug 8, 2011
My dlink aircard wont connect to wpa psk networks.Why is that.
View 5 Replies
View Related
Dec 13, 2011
I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
View 1 Replies
View Related
Oct 6, 2011
Have installed a TP-Link TL-WN722N wireless USB adapter.O/Sis Win XP SP3.Np options are showing for Wireless networks under Network Connections.Wireless Zero Conifguration is on.When I run a QSS app I can see neighbours network but not my own (My equipment doesn't support QSS) so the card and driver are working.
View 7 Replies
View Related
Apr 7, 2013
We have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
View 1 Replies
View Related
Aug 3, 2012
I've been having this issue for quite some time on my Windows 7 SP3 x64 machine. It's a desktop, connected via ethernet to a TP-Link WR740N router, that also provides wireless coverage. My ISP is a local one (the country is Latvia), and it offers a decent 100 MBps up/down optical fiber internet service. Now for the problem - there is only one home network on my computer, that seems to work, and that is 'Network 2'. Whenever I have to reboot the router for whatever reason, it attempts to reconnect, but sometimes reconnects to a 'Network 3' and once even to a 'Network 4' and 'Network 5'. None of these other networks have internet access. I tried to run the diagnostics tool on the issue, and usually it told me that there's a problem with the default gateway. Additionally, twice I've had the issue of the computer completely freezing when connected to one of the Internet-less networks (eg 'Network 3'), and trying to disable the network adapter, forcing a restart that consequently caused a fail boot - from there on I had to use System Restore to actually get my PC to function.
The way I've been fixing it, apart from random rebooting, reconnecting, and hoping for the best (that it decides it wants 'Network 2'), is by putting in the Resource Mini CD that came with my router, and running the Wizard for the WR740N router. It has 4 steps, the 2nd of which is 'Installing the router' (configuring the network adapter), at which point, my internet starts to work (always connects to 'Network 2'). If, I however, decide to continue this process to the step 'Configure router', and attempt to set up my wireless connection, it will begin to reset itself, and once again connect to 'Network 3', leaving me without internet access.
View 4 Replies
View Related
Sep 18, 2011
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
View 1 Replies
View Related
Apr 1, 2012
My dad has a business he runs on our network that everyone in the house uses for general needs. I am a gamer and often want to host servers for my friends. This requires that I have ports opened on the router, which I cannot do as I don't have access to change the network. Is it possible to create 2 networks on the same ISP, and if so how would you do it?,I have my current network running on an Apple Time Capsule with AirPorts around my house acting as extenders.
View 5 Replies
View Related
Jan 3, 2013
So I moved my modem & router upstairs and for some reason my home network doesn't connect to the internet but I can set up a separate connection. Seems wrong....should just be one. (And my internet connection bars in the bottom corner have an exclamation mark. Is it because this computer was on the network wirelessly and now it isn't?) Was going to just reset the router.
View 4 Replies
View Related
Aug 16, 2011
data card n a cable network at same time?
View 2 Replies
View Related
May 1, 2011
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies
View Related
Aug 15, 2011
We have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.
Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.
View 6 Replies
View Related
Sep 10, 2012
This has me baffled: since the weekend I've been unable to connect to certain networks. Previously I could connect to any available network as normal, but all of a sudden I can't get onto certain network connections despite the fact they are available and at full signal strength. Some connections are fine, others are not.Something odd happens when I unsuccessfully try to connect: a window pops up but in the blink of an eye disappears again before I have time to register whether it's an error message or what.I've checked for Window updates and am fully updated, I've run my virus scan (Microsoft Security Essentials), and I've performed Windows Network Diagnosis to no avail.otel overseas and am now feeling the problem as I can't get onto the hotel's free wifi and am having to use my iPhone as a personal hotspot which is costing me a bomb
View 4 Replies
View Related
Feb 14, 2011
I've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Sep 2, 2012
Recently, I upgraded my PC into basically a completely new machine. Because the harddrive that I planned on using was IDE, and my IDE-Sata adapters weren't being recognized on BIO, I used a fresh sata harddrive and a copy of Windows XP Professional.
It booted fine, all parts recognized, only now I cant connect to any LAN networks. I only get the option for VGN, Broadband and Dial-up networking. Using a laptop at the moment
I've tried two different usb adapters, and connecting the LAN cable directly into the PC. The cable works on another desktop in the house, but my PC wouldnt let me make the LAN network.
View 1 Replies
View Related
Dec 26, 2011
I've had my Westell wired to my PC forever--well, for a couple of years--and I just got my wife a tablet.How to configure it/set up,my wireless network in a smart way that will keep others out. I see a WEP on the bottom, but... I kinda dumb about these things.I know there's a Wizard available in my XP control panel.
View 2 Replies
View Related
Aug 23, 2012
I have a one ISP connection which is connected through �US_Robotics_Modem�. By default its Ip address is 192.168.1.1 and Iam running a DHCP start from 192.168.1.2 to 192.168.1.254. This is my first and main Network.Now I want to configure different Four networks using the same ADSL connection. For example:
Main Network Ip: 192.168.1.1, 255.255.255.0
Second Network: 192.168.2.1, 255.255.255.0, DHCP starts from 192.168.2.2 to 192.168.2.254
[code]....
How can I connect Internet on all others Networks using the Main Network?
View 1 Replies
View Related
May 15, 2011
I have two router as well as two switch. 1st router is Dlink's router, I used this router for sharing files and folders and also connect to NET. And 2nd router used for Windows Media Encoder to upload my audio data to other computer.My first router is connected with a 16 port DLink switch, and also 2nd router is connect with another 8 Port Dlink router. Now, 1 computer has two LAN card and it connect with both router through switch. But both is not working at a time, but if i disable one LAN another is worked and vice versa.
View 2 Replies
View Related
Jul 4, 2012
my pc just arrived this morning.. Booted it up, installed windows. All good. On the desktop now, and can't connect to my home network.. In fact I can't connect to any networks.. Windows tells me there are none available, but i'm using my laptop right next to my pc and there should be at least 5 connections including mine..
I DO HAVE a wireless card in there... but is there something you need to do to like activate it / turn it on? I can see the card listed in device manager.. it says it is working properly. Just can't connect to anything!
All i wanted to do was do some browsing on my new pc but looks like I will have to wait.
View 2 Replies
View Related
Feb 14, 2012
I am having trouble setting up two networks.Basically, i want one 'private' network and one public network. The problem is, the private network can't access the internet.(Network 2)
Network 1(Public) works fine as i don't want them to access Network 2.Here's how it is setup.
Internet
|
Router/Modem (Network 1)
|
Server NIC1
Server NIC2
|
Switch - (Network 2)
Network 1 can access the internet and shared files on the server.
Network 2 can access Shared files on the server (which is what i want) but cannot access the internet.
Router/modem IP is 10.10.1.254 subnet 255.255.255.0
Server NIC 1 IP is 10.10.1.252 subnet 255.255.255.0
Server NIC 2 IP is 10.10.1.251 subnet 255.255.255.0
How can i get computers in Network 2 to access internet?
View 5 Replies
View Related
Jan 3, 2012
I purchased a network storage device and would like every one i the house to be able to access it.I have attached a small diagram on how everything is connected.The modem given to me by my ISP has only 2 lan ports i can use(lan1 and Lan2)This modem is configure with the IP range 192.168.2.XXXOn this i have connected a netgear router and have configured it with the internal network IP range 192.168.1.XXXOriginal i had ALL PC's and devices connected to this router and everythign worked fine, but when using download software i.e. P2P the speeds would cause the router to crash and i had to go and power restart it to work. Becuase of this i connected MY PC directly to my ISP's modem so i dont keep crashing the router.
This all works fine, but i recently purchased a network storage drive that i would like every one to have access in the house.Becuase the Storage drive and my PC are on the IP range 192.168.2.xxx and everything connected to the router is on the IP range 192.168.1.xxx how can i give everyone access to the storage drive ??I know if i reconnect my PC and drive back on the netgear router it will work but i cant do that becuase of the location and becuase of the original issue of when downloading on my PC it would block the router.
View 7 Replies
View Related
Apr 24, 2011
i noticed this morn that my LAN has disappeared from my networks. just leaving my tplink wireless adapter, but have a network card in pc, but it has disappeared from device manager as well, but when plug in the modem it lights out, but still nothing, still nothing in device manager, using win 7 32bit actually i have 2, an on board one as well, but both missing
View 3 Replies
View Related
May 11, 2012
I have two networks that are on two different IP ranges, sharing an ADSL internet router.I can make the two networks access the internet through a Windows 7 PC acting as a router with two NICs, but I cannot print to a shared network printer (build in NIC in the printer).This is how it looks.
ADSL router IP:
IP address: 10.10.10.253
Subnet Mask: 255.255.255.0
Network A computers:
IP range of: 10.10.10.XXX
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.10.253
[code]....
Note: All the computers can access the internet just fine, it's only the one set of computers on IP range 172.16.0.XXX that cannot see the printer.All computers are Windows 7 32bit Professional.
View 2 Replies
View Related
Feb 14, 2011
I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other. I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Aug 23, 2012
I have two wifi networks in my home, 1 has the internet wifi signal and 2 is my personal network. How can I use the internet signal from one whilst staying connected to my own network.the net sifi signal is from a virgin media superhub, and my personal wifi network is using an asus rt-n65u which has a wds mode not sure if this
View 9 Replies
View Related
