*-my router is a sonicwall nsa 2400. (ip: 192.168.0.7)
*-my network adresse is : 192.168.0.X /255.255.255.0
*-all computers in my network are using stat ips (not my fault, and i can not change this fact).
Question: Can i add a new network range (not physical wires ) in this router expl 192.168.1./255.255.255.0 X with DHCP,and link it to 192.168.0.X so two computers in this differents networks range can talk to each others ?
I have two networks that are on two different IP ranges, sharing an ADSL internet router.I can make the two networks access the internet through a Windows 7 PC acting as a router with two NICs, but I cannot print to a shared network printer (build in NIC in the printer).This is how it looks.
ADSL router IP:
IP address: 10.10.10.253
Subnet Mask: 255.255.255.0
Network A computers:
IP range of: 10.10.10.XXX
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.10.253
[code]....
Note: All the computers can access the internet just fine, it's only the one set of computers on IP range 172.16.0.XXX that cannot see the printer.All computers are Windows 7 32bit Professional.
I have a cable modem, hub and two routers. One router is wireless and the computers on this router have an IP address of 10.1.x.x. The other is a wired router and the computers on this router have an IP address of 192.168.x.x. Computers on both networks have Internet access but can't talk to computers on the other router.What I'm wondering is instead of using 3 hardware devices (1 hub/2 routers), is there any router model that will allow me to setup two internal networks similar to what I have above. I just want to cut down on the equipment and power that I use with my current setup.
View 1 Replies View RelatedI want to set up 2 separate network with one cable modem for my restaurant. we wants to provide WIFI access to its customers, but wants to keep their internal network separated.
View 2 Replies View RelatedD-Link, RangeBooster N, Dual Band Router.
I would like to set one network for surfing and another for gaming.
I am tryign to setup 2 networks for my company. I need 1 network for the first room and another network on the second room. Each room can't access another room's computer. I have setup 2 workgroups for each room but it seems that the workgroup can't setup passwords. Every computer is in the same subnet with static ip. They all connect to a switch -> router -> modem.
View 3 Replies View RelatedI have a Zyxell Modem/Router with 4 ethernet ports running 10/100, if i plug a gigabit switch in to this and then plug 3 PC's into the gigabit switch, (each PC has a gigabit NIC) will the router pull the network down to transfer all data at 100mbps or will the PC's continue to transfer at 1000mbps and only the connection from internet router will be at 100mbps.
View 4 Replies View RelatedI am currently working on a project that needs to install a router (or just a network device) that can offer 2 or more DHCP networks. We have been searching a network device for this but haven't gotten any good news yet. Any model or device that can fulfill this requirement?
View 6 Replies View RelatedHow do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies View RelatedI want to setup two WIFI network with one Router at home.
View 2 Replies View RelatedCan we connect different networks using switch without a router
View 4 Replies View RelatedMy wireless router will no longer appear on the list of available networks, but it can find others. My partner's laptop will find it instantly! So it's obviously something on my computer.
OS: Vista Ultimate
Internet Provider: Sky
Country: UK
My neighbor and I were wondering if it is possible to combine our respective internet connections in order to gain a faster connection overall. What would be ideal would to have a wireless router in one of our houses, that is simultaneously connected to both of our ADSL routers, and to which both of us are able to connect. Do I need a specific type of router?
View 5 Replies View RelatedI live in a school residence with a roomate and we both have an internet connection in our rooms but it's two separate networks since we can't see eachothers pc on the network. Both our pcs are connected to a switch and those switches are connected to the two internet connections. I would like to know how to bridge those two networks using a router in the living room. I would also connect a printer and an xbox to the router so we can both access the printer, the xbox can access both pcs and we can access eachother's pc.
View 3 Replies View RelatedWe have an 871 vpn router conntected back to our main facility ASA5500. The VPN tunnel seems to come and go for no reason we can find.
The weird thing of all this is that we can only ping some subnets and not everything even though we alow all networks to be routed.
This is one of those things we keep looking at but for some reason just can't find the problem. Hoping another set of eyes spots something obvious.....
Config below
Current configuration : 9347 bytes!version 12.4no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime localtimeservice timestamps log datetime localtimeservice password-encryption!hostname Lincoln-Office!boot-start-markerboot-end-marker!logging message-counter sysloglogging buffered 64000enable secret 5 xxxxxxxxxxxxxxx!aaa new-model!!aaa group server radius ACS server 10.2.2.201 auth-port 1645 acct-port 1646 (code)
A friend of mine had a 802.11b netgear router and all of her computers were running just fine on it so she says. She bought and installed a 802.11n router and bought usb adapters for all her computers and all work, except one, a Dell Optiplex 330 that runs Windows XP.Some drivers were missing such as her Ethernet Controller and a chipset driver but I was able to install those from the Dell website. She had not yet bought a new USB adapter for the computer, I tried using my D-Link adapter and I can see the network in the D-Link connection manager but in Windows when I go to view a list of wireless networks, it doesn't show any. I cannot connect to the network from the D-Link connection manager.
View 3 Replies View Relatedmy dlink dsl-520b dls modem is using 192.168.1.1 and is plugged into the WAN port on my dlink wireless router.the wireless router is 192.168.0.1. (these are both in the main building which is remote from my shop).Then i have a netgear wireless access point This spreads the signal properly, and I can get connectivity on all my computers -although i do have to specify a default route on the computers on my shop side of the access point.I noticed that the internet light on my modem is red which indicates no internet connection. I am still able to access the internet fine, but i would like to be able to log into the modem from my network. I was able to do this before by setting a computer with a netmask of 255.255.0.0.
View 6 Replies View RelatedThe setup...DSL Modem (provides DHCP) LAN port to 24 Port switch. all hard wired PCs are directly attached to 24 port switch.All hard wired PCs can "see" each other.Linksys WRT54G router WAN port is connected to one of the LAN ports of the 24 port switch providing a separate network for my wireless devices.ALL wireless PCs can "see" each other.Problem is that the wired PCs can not "see" the wireless PCs.The wireless PCs can Ping the wired but not the other way around.What I want to do is share folders between the wired and wireless networks.( I know I can turn the router into an AP on the switches LAN, by disabling DHCP in the router, not using its WAN port and hooking one of its LAN ports to the 24 port switch.....BUT... I use the routers access restrictions to limit my kids internet time and without using the WAN port the router does not keep the date and time)It would be like doing file sharing from the internet to a private LAN but without the security concerns!
View 2 Replies View RelatedWe have an E4200, currently with wireless disabled, on a Windows 2003 based domain. We have a Static IP from our ISP.We want to install some wireless & wired security cameras (IP-based) so that we can view them from our iphones or droids outside the network. The software for these cameras will reside on a computer that is not currently on the network, but needs to use the same Internet connection as the current domain. We basically want to separate these cameras & computer from the current network, use same Internet connection (& Static IP), and enable wireless on the E4200 for the cameras only.
View 9 Replies View RelatedWe are running our internal network on the 192.168.1.x range.
We have just installed a new control system which is running on a closed 192.168.0.x network (no internet access).
What we need to do is use the WRT54G to connect the 2 networks together so that we can VNC into one of the computers on the control system network so that it can be managed.
I have tried connecting the two networks by plugging the 192.168.0.x network into the WAN/Internet Port on the WRT54G, and setting the "Internet Connection Type" to "Static IP" and setting the "Internet IP Address :" as 192.168.1.200 (the main PC I need to VNC into) but cannot ping any of the other computers..
I've gone through a couple modems, only possible reason I can think this is happening, but I don't know for sure if it could be a factor. Anyway, it seems my router is running two... networks? I've reset my router, set up my wireless network, configure the SSID name, password lock it, but there still appears to be a "Linksys" network running with no password. I'm afraid it's being used by someone else, seeing as it's free wifi. I've reset my router a couple times and set up my wifi and this linksys still appears to be running. The reason why I feel it's mine is because one night our net went out and when my brother attempted to log onto the linksys, its net wasn't working either. When our net came back up, the linksys was running with working net once more. It seems like too much coincidence to not be true. I'm really not sure what is causing this and I've never experienced this before.
View 1 Replies View RelatedI have got a cisco 1841 router. I am able to create different vlan in the cisco router and I have got only 2 ports, fa0/0 and fa0/1. Now, I need to create different network in the same router at least four networks. FA0/0 is used for external networks. Now I want to create 4 vlan in this router. Namely, 10. 10. 10.1, 10.10.11.1, 10.10.12.1 and 10.10.13.1. The FA0/1 is connected to a 48 port normal switch. In the switch I am going to connect the cable of all the 10. 10. networks. Is this possible to access creating four vlan and routing all of them to the external networks with the fa0/1 port only. Is dot1q possible with only the router and a normal switch or is there any other possibility for this case.
View 5 Replies View RelatedI need setting up two networks to use the same internet connection.Network A is on IP range 192.168.1.x and Network B is on 192.168.0.x and the firewall with internet connection is on Network A at 192.168.1.2.Network B must be on diffrent IP range that Network A can not access it, but the two networks are linked with a Linsys Cisco WAG120N router.Network A can access the internet fine as use gateway ip 192.168.1.2 but how do i get Network B to use that same gateway/internet connection?
View 3 Replies View RelatedI am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able to access it and attempt to set it up. However, once I tell it how to connect to my main wireless router, and it attempts to log onto my wireless network, the RE1000 disappears from my list of networks. My blu-ray player also cannot see it.
View 5 Replies View RelatedI have a home office with a network served by a Linksys BEFSR41 wired router. It includes a laptop and HP printer.. This router also connects to my cable modem for internet access. I also have a second wireless linksys E1000 router hardwired to the home office router. It serves my wifes's laptop in the kitchen and also a ROKU in the den. I tried using the wireless router for the whole house, but the signal was too weak and unreliable. With the current layout, I get a strong signal thoughout the house and my home office uses the wired router.. My problem is that I can't access the printer in my home office.
View 3 Replies View RelatedI have a big issue in providing internet service to the networks that are connected to a router. Also i do wanna know whether ipv6 can be used in 2811 routers.
View 2 Replies View RelatedI've been having this issue for quite some time on my Windows 7 SP3 x64 machine. It's a desktop, connected via ethernet to a TP-Link WR740N router, that also provides wireless coverage. My ISP is a local one (the country is Latvia), and it offers a decent 100 MBps up/down optical fiber internet service. Now for the problem - there is only one home network on my computer, that seems to work, and that is 'Network 2'. Whenever I have to reboot the router for whatever reason, it attempts to reconnect, but sometimes reconnects to a 'Network 3' and once even to a 'Network 4' and 'Network 5'. None of these other networks have internet access. I tried to run the diagnostics tool on the issue, and usually it told me that there's a problem with the default gateway. Additionally, twice I've had the issue of the computer completely freezing when connected to one of the Internet-less networks (eg 'Network 3'), and trying to disable the network adapter, forcing a restart that consequently caused a fail boot - from there on I had to use System Restore to actually get my PC to function.
The way I've been fixing it, apart from random rebooting, reconnecting, and hoping for the best (that it decides it wants 'Network 2'), is by putting in the Resource Mini CD that came with my router, and running the Wizard for the WR740N router. It has 4 steps, the 2nd of which is 'Installing the router' (configuring the network adapter), at which point, my internet starts to work (always connects to 'Network 2'). If, I however, decide to continue this process to the step 'Configure router', and attempt to set up my wireless connection, it will begin to reset itself, and once again connect to 'Network 3', leaving me without internet access.
I have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router. I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.
Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.
What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
I have a need to have 2 seperate networks from my comcast cable modem.I was hoping to plug a 5 port hub into the cable modem and then plug both the wrt610n and the wrt54g into the hub. Seem that only one of the routers will get an ip assigned from Comcast.Is there a way to have one ISP cable modem and create two different home networks with the two linksys routers, thus two separate independent networks?
-Network 1: public household use and family (Jane's wireless laptop, household PC's etc).
-Network 2: private household/company use and separate from the public family network (company wireless laptop/company PC, un-secure media server).
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
I just bought a WRT54GL which is working perfectly. I needed it to extend my home network for my kids (I have not a very fast internet connection and my kids are eating all of it... With the WRT54GL I can choose how much they can have. So my own network has a netgear modem and a netgear wifi access point which is in this network : 192.168.0.x.
This network is not blocked in any way (just password protected). For my kids network, the WRT54GL gives addresses in this network : 192.168.1.x and is limited in speed. Everything is perfect, I have internet connection on both of my network, There is just the problem that I cannot access my printers, my servers, my computers.... that are on the 192.168.0.x network from 192.168.1.x. Is there a solution ? I already tried to force the WRT54GL to go to 192.168.0.x network but no more connection. Should I "bridge" the two networks ? How can I do it ?
Having just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies View RelatedI assume that the E4200 uses VLANs for the the guest network. Is it possible to trunk the LAN interface and pass that vlan to the switch so that you can pass the vlan to an AP?Would be great to see the Guest wireless on the Cisco 1250 like I do the main SSID.
View 5 Replies View Related