Cisco WAN :: 1841 Create Different Network In Same Router At Least Four Networks
Sep 11, 2011
I have got a cisco 1841 router. I am able to create different vlan in the cisco router and I have got only 2 ports, fa0/0 and fa0/1. Now, I need to create different network in the same router at least four networks. FA0/0 is used for external networks. Now I want to create 4 vlan in this router. Namely, 10. 10. 10.1, 10.10.11.1, 10.10.12.1 and 10.10.13.1. The FA0/1 is connected to a 48 port normal switch. In the switch I am going to connect the cable of all the 10. 10. networks. Is this possible to access creating four vlan and routing all of them to the external networks with the fa0/1 port only. Is dot1q possible with only the router and a normal switch or is there any other possibility for this case.
View 5 Replies
ADVERTISEMENT
Feb 21, 2012
VPN 1841, and static nat. I have to create VPN to connect to remote network, but problem is that they already use same subnet as mine. How to configure static nat on cisco 1841 so static nat will work and address will be translated in different IP when connection trough VPN.
I have address 192.168.235.1 and I want to translate to 192.168.100.1?This 1841 is border router, and all VLNAs and VLANs routing is on 3650.
View 1 Replies
View Related
Feb 10, 2011
I need support regarding IPSEC - VPN in 1841 Router? I had purchsed 1841 Router and i dont know how to check, whether supported for VPN or not?
View 4 Replies
View Related
Sep 14, 2012
how do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
View 4 Replies
View Related
Sep 25, 2012
I am using D link DIR 615 router for my network. My ISP sent me a letter few days ago that they can provide me total separate wireless connection other than my regular connection. But they will charge me $10/month for this. just wondering do we have any way to create two separate wireless network so that my clients can access that free wireless connection when they are in my store. But on the other side they don't interfere with my regular connection and its good for my network security too.
View 8 Replies
View Related
May 14, 2012
I recently bought a new computer and router, and want to hook up the router. I read that you can have two routers by connecting one to another with a really long cable, but how does that work? I don't know how and i don't want to mess up my current internet.
View 6 Replies
View Related
Apr 3, 2013
I have DSL with a Comtrend router/wifi (WIFI1). I would like to connect the WRT54GL to the physical network and have it create a separate wifi network (WIFI2), so my laptop will connect to WIFI2, get passed to the LAN and on to the Internet. Cant make this work - tried setting up the WRT for DHCP server, DHCP pass through (to the comtrend), and the best I can do is get connected to WIFI2 and have access to the LAN but not the Internet. Ultimately I want to put a high gain antenna on the WRT to make it reach another building about 400' away and do away with comtrends horrible WIFI, but I cant get to first base.
View 3 Replies
View Related
Jul 6, 2012
I work at a small public library and we're trying to setup wireless internet for our patrons. I've been studying VLANs, trunking, etc and going through the Mike Meyers book trying to study and learn enough to prepare for the Network+ cert. We are using a Cisco 1841 router, a Linksys SRW224G4 switch, and we just purchased on recommendation the Cisco WRVS4400N Wireless N VPN Router.
View 3 Replies
View Related
Jan 22, 2013
At home I have a D Link DSL-2640R wireless adsl router/modem in my downstairs office.I would like to use the cable which goes to upstairs of the house to link to some sort of extra router or switch in order to provide more network ports upstairs.
View 1 Replies
View Related
Apr 5, 2013
I have sent up a wireless network in a large building using WAG120N Modem Router and four E1000 wireless routers set as access points. The E1000's have the DHCP switched off to enable roaming so the WAG120N takes care of all that.
View 1 Replies
View Related
Apr 5, 2011
I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies
View Related
Jan 29, 2013
how do i connect client computers to a server using a 3g gsm sim dongle for each computer and the server aswell...sounds weird but the client computers are way too far away from the server computer.
View 11 Replies
View Related
Sep 7, 2011
I would like to know how to create my own network key for my everywhere wireless.
View 1 Replies
View Related
Sep 4, 2012
I've recently moved into a new flat above a pub. The pub has internet which we are free to use but there it is an open network with no password protection and I don't feel comfortable connecting all my devices to it.Is it possible to create another network within the existing one? Perhaps by using another router with a password protecting it?
View 10 Replies
View Related
Oct 17, 2012
I need to create a 5gb limit on a network. My friend is only allowed 15gb a month and their brother uses it all within a few days. Is there any way to make it where once he's used 5gb his computer is blocked from using any more?
View 1 Replies
View Related
Nov 9, 2012
I want to create a network with the following switch SF 300 - 08.I am not use to GUI.I am having problems setting the settings.Currently, i have assigned each port with a vlan 1 to 8 for ports 1 to 8.How do i do an inter vlan with the GUI? Also, i want to restrict port 7 and 8 to certain ports only. Example:Port 7 and 8 can read port 5 and 6 but not others?
View 9 Replies
View Related
May 6, 2011
Got two pc's, two routers and one switch, and two serial cables and I want to create a network.
View 4 Replies
View Related
May 1, 2012
how to create WiFi network with uninteruptable roaming between Access Points while clients are moving.What hardware is the best here? Are there any manuals about that?
View 2 Replies
View Related
Sep 3, 2012
I have want to know that how to create network setup and how to do TCP / IP Property setting.I want to know about DNS server and Altar net DNS Server and their IP Address.
View 2 Replies
View Related
Apr 12, 2012
I need to create a network bubble..means..Let say I have 4 machines having IP address 10.1.1.1,10.1.1.2, 10.1.1.3 and 10.1.1.4 (these are not actual IP's, using them just for explaining). These machines are connected to public network. At a given point in time, I need to isolate these machines from the public network in a way where - All these 4 machines can talk to each other using the assigned IP's. - These 4 machines cannot talk to any other nodes in the public network. no other machines outside these 4, will be able to ping these machines.
View 4 Replies
View Related
Nov 14, 2011
I need to buy wireless dongle & I'm most likely going with 3.
Can I create a wireless network from a dongle to connect an Archos A28 (Android portable tablet). Like Laptop (Vista Business) connected to internet through dongle in USB slot & Archos can also access internet through said dongle?
Or will I need to buy something like the Mifi thing that is designed as a portable wireless hotspot & connect my laptop & Archos to this?
View 7 Replies
View Related
Apr 17, 2012
I would like to create a network between my laptop and desktop PC so I can use the printer.
View 1 Replies
View Related
Sep 17, 2012
My desktop, which runs on Vista, is connected to the internet via a cable modem. I am trying to get my laptop, which runs on Windows 7, to connect to the same network without a router via the use of an Ad-Hoc network.
I have created the Ad-Hoc network on my desktop and have successfully connected to it through my laptop. The problem is that although I am connected to the Ad-Hoc network on the laptop I cant connect to the internet. It simply says Access Type: No Internet Access. I have internet sharing on and don't know what to do to successfully connect to the internet via the laptop. When I diagnose the connection it says "The network adapter does not have a valid IP configuration" I have both pcs set to "Obtain IPv6/v4 addresses automatically" and dont know what else to do.
View 2 Replies
View Related
Nov 4, 2012
My question is can I split my cable to create my own network? For example my direct cable wire into the home then split it to tv then router to my laptop...
View 1 Replies
View Related
Jul 26, 2012
How do I create a small office network?
View 1 Replies
View Related
Jan 8, 2013
I am trying to create a VPN on my Mac that I can access from my iPad in a remote location (work.) I have been using "iVPN" on the Mac to "distribute" the home Mac's Internet connection to the iPad. I have everything set up right and the VPN works fine and the iPad connects fine, just not when I am work, where I want it to work. The iPad tells me that it cannot connect to the VPN. I believe my work blocks VPN ports (1701, 1723 etc) I can do a google search from the iPad on the work WiFi so the connection is ok, but I believe those ports are blocked. If I connect the iPad to a restaurant's wifi for example, the VPN connects fine. What client can I use to create my own VPN at home where I can use a standard port like port 80 or something that is not blocked at work so that I can connect to the VPN from work?
View 10 Replies
View Related
Jul 23, 2012
When it comes to fiber optics my knowledge is very limited. All I know is that they can carry data at high bandwidth for a long range at blazing speeds etc.My boss has asked me to link several buildings to the network and I am led to believe that joining them through fiber optics to be best since we are expecting a lot of data traffic between.I have done the normal RJ-45 networking with Gigabit networking in my organisation but need your assistance on how to join each of the buildings through fibre optics.Draw up the fiber optic lines from the main building to each building.All the buildings have Gigabit Cat6e cabling and network in each.I am planning on using a single mode media converter to convert the end of the fibre optic to the normal RJ45 connector and plug it to each switch at each of the ends of the fiber optic cable .I don't even know the gadgematics required except for the cables them selves, crimping tools, the media converter. There is about 300-400 metres in between of each building from the main building.Also, I believe that we need to create cross over cables as in the normal way we do in connecting 2 switches.
View 1 Replies
View Related
Jan 6, 2013
how do i create network b/t vm ware and host machine ?
View 1 Replies
View Related
Dec 14, 2011
How do I create a local network with 12 desktop computers and one printer. then i want the LAN connected to the World wide web. all the computers run a windows xp operating system. Need both the physical set up with less wire view in the room and software set up.
View 4 Replies
View Related
Nov 20, 2012
I would like to create a Mesh network using Cisco 1242 AP's running in Autonomous mode via A Channel.
View 5 Replies
View Related
May 17, 2011
I have a customer an exisiting 5505 which connects to multiple sites for a site-to-site VPN. This firewall was not installed by myself originally I have just been asked to take a look now.The situation is that we now need to edit one of the existing site-to-site VPNs to include the remote sites expanded network. I have tried doing this through the ASDM and have found that I cannot add new network objects. I have tried creating a new network object group and then added the new networks from there but I am completely unable to add the new objects.I believe a picture tells a thousand words in this case so I have attached some images which show the problem. I have also tried going through the VPN wizard, this also does not allow me to add new network objects.
View 2 Replies
View Related
Jan 30, 2012
I have recently upgraded my ASA 5510 to 8.3 code and honestly I am confused on the best and most efficient way to do many nat translations through it. I have a group of about 100 IP's that need http/https/and sqlnet allowed through for our web farm.
I have a text file with the real and translated IP addresses and in 8.2 I could simply modify it and dump the thing in and make the NAT rules and access-lists. Now with the new object based model I am having a hard time wrapping my brain around how to do this using as few lines of code as possible.
Do I have to create an network object for each and every IP i want to nat through?
View 1 Replies
View Related
Sep 11, 2012
creating an Access List on my Intervlan network.how I create my network.I've managed to get the Inter-vlan working and my problem now is to restrict some vlan from accessing one another.
- I've enabled IP Routing on 3560 switch.
- All vlans can PING each other.
- All vlans can access the internet (172.16.1.2)
View 8 Replies
View Related