Broadband :: How To Create Network Setup
Sep 3, 2012I have want to know that how to create network setup and how to do TCP / IP Property setting.I want to know about DNS server and Altar net DNS Server and their IP Address.
View 2 Replies
ADVERTISEMENT
Broadband :: Create Another Network On One TWC Internet Service?
Feb 3, 2013I fought with trying to hang two old BEFSR41 routers on an incoming TWC cable internet. I have a couple of streams going out and one coming in... and I think there are some collissions going on that cause little Urps in the streams. I thought I could put them on two different subnets. Ha. No luck at all so far. The scheme they gave me used a fixed IP and a subnet of 255.255.255.252... now I think I understand why TWC assigned a subnet of 255....252 - so I could only use ONE router. Their little toy is still routing, mine does it's thing.. that's it. In order to add another router and a totally different group of PC's on the same bandwidth... I'd have to get into their box and change the subnet scheme to something more open.. 255.....248, or maybe back down to 255...255.0 I guess..
View 1 Replies View RelatedBroadband :: How To Create Icon Of Missing Local Area
Jan 16, 2011i have re installed xp on my p.c. after that local area connection icon is not available, so i cant access inter net connection
View 3 Replies View RelatedCisco :: LMS 4.2 Can't Setup / Create Pollers In Performance Settings
Mar 4, 2012I'm currently testing LMS 4.2 and I setup a new install. I was able to discover devices, check and backup configs and check for compliance. One thing I can't do is setup pollers to monitor performance. If I click on setup (or any of the 3 options associated with it) under monitor-->performance settings I get an HTTP error 500 from Apache Tomcat. If I click on the monitoring dashboard I don't see any alerts or graphs... Did I skip something during the install?
View 1 Replies View RelatedCisco :: Asa 5505 - Create A (remote Access Vpn) Setup For Ipsec?
May 8, 2012I have a newly aquired asa 5505 that I just set up to the bare minimum configurations. I followed a cisco paper on how to create a "remote access vpn" setup for ipsec. I can sucessfully connect and establish a VPN, but when I try to access an inside resource from the vpn address, the asa blocks it.
Specific error is: Code...
VLAN Setup For 2 Different Broadband Connections
Apr 26, 2012I have a general networking question regarding VLANS, multiple broadband connections and accessing PC's on both setups from each other.What I would like to do is have 2 broadband connections, one a cable connection and one a DSL connection. I would like to run them both through a Netgear FS-726T switch. Since the cable connection will go through a Linksys router giving out I.P.s in the range of 192.168.1.x and the DSL will probably use the same range, I would like to keep specific PC's connecting through the DSL connection and some other PC's specifically through the cable connection. I THINK that this can be done via the use of VLAN's set up on the Netgear switch but I am unfamiliar with setting them up. I've read through the manual and researched it online but I must be missing something.Due to the bandwidth limitations on the Comcast connection, I would like to avoid any data coming from the PC's on the DSL connection from going out through the cable connection (I do customer support for my business and want customers to be able to access files on my file server and also be able to back up their PC's online to my backup server but on the DSL connection. I will eat up my cable bandwidth in a hurry just from the backups alone. I would like to set up all the PC's with static I.P. addresses if possible. Now, I also need to be able to remotely access any of the PC's from outside my network (which I can do now) but I need to be able to access the cable connected PC's from the DSL connected PC's and vice versa.I have a feeling what I want to do is a mess and may not even be feasible. I have asked the networking personnel where I work but (primarily because they are arrogant SOB's) they won't even give me the slightest bit of information.
View 1 Replies View RelatedBroadband :: Setup VPN Connection Over Satellite?
Jan 14, 2011We are in a remote area in Michigan which has High speed internet via Huges net but we are unsure of being able to set up a VPN required by the credit union to work from home?
View 1 Replies View RelatedBroadband :: Intercoms Do Not Work After Dsl Setup
Sep 16, 2011My intercoms do not work after dsl set up. Can I remove the filters from the intercoms and still have my qwest dsl work.
View 1 Replies View RelatedBroadband :: Setup Computer With 2 Lan Card Windows Xp
Oct 8, 2011how can i share my Internet connection using 2 LAN card without router to my another pc
View 1 Replies View RelatedBroadband :: Setup New Netcore Nw705p WiFi Modem But DSN Is Not Working?
Jun 1, 2012my new netcore nw705p wireless router dns is not respondin
View 1 Replies View RelatedBroadband :: Setup Internet Connection For Every System With BSNL DHCP Modem?
Jul 3, 2011I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.
View 2 Replies View RelatedCisco Routers :: Linksys Wireless-g Broadband Wrt54g Wifi Protected Setup
Apr 10, 2012I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
Create A Network Using A 3G Gsm Sim In A Dongle?
Jan 29, 2013how do i connect client computers to a server using a 3g gsm sim dongle for each computer and the server aswell...sounds weird but the client computers are way too far away from the server computer.
View 11 Replies View RelatedHow To Create Own Network Key Password
Sep 7, 2011I would like to know how to create my own network key for my everywhere wireless.
View 1 Replies View RelatedCreate Another Network Within The Existing One?
Sep 4, 2012I've recently moved into a new flat above a pub. The pub has internet which we are free to use but there it is an open network with no password protection and I don't feel comfortable connecting all my devices to it.Is it possible to create another network within the existing one? Perhaps by using another router with a password protecting it?
View 10 Replies View RelatedCreate A 5gb Limit On A Network?
Oct 17, 2012I need to create a 5gb limit on a network. My friend is only allowed 15gb a month and their brother uses it all within a few days. Is there any way to make it where once he's used 5gb his computer is blocked from using any more?
View 1 Replies View RelatedRouters / Switches :: How To Create Network Between Two PCs
May 6, 2011Got two pc's, two routers and one switch, and two serial cables and I want to create a network.
View 4 Replies View RelatedTo Create Roaming Wifi Network
May 1, 2012how to create WiFi network with uninteruptable roaming between Access Points while clients are moving.What hardware is the best here? Are there any manuals about that?
View 2 Replies View RelatedHow To Create Network Bubble With 4 Machines
Apr 12, 2012I need to create a network bubble..means..Let say I have 4 machines having IP address 10.1.1.1,10.1.1.2, 10.1.1.3 and 10.1.1.4 (these are not actual IP's, using them just for explaining). These machines are connected to public network. At a given point in time, I need to isolate these machines from the public network in a way where - All these 4 machines can talk to each other using the assigned IP's. - These 4 machines cannot talk to any other nodes in the public network. no other machines outside these 4, will be able to ping these machines.
View 4 Replies View RelatedCreate Wireless Network From Dongle?
Nov 14, 2011I need to buy wireless dongle & I'm most likely going with 3.
Can I create a wireless network from a dongle to connect an Archos A28 (Android portable tablet). Like Laptop (Vista Business) connected to internet through dongle in USB slot & Archos can also access internet through said dongle?
Or will I need to buy something like the Mifi thing that is designed as a portable wireless hotspot & connect my laptop & Archos to this?
How To Create Network Between Laptop And Desktop
Apr 17, 2012I would like to create a network between my laptop and desktop PC so I can use the printer.
View 1 Replies View RelatedCreate An Ad-Hoc Network Between Desktop And Laptop?
Sep 17, 2012My desktop, which runs on Vista, is connected to the internet via a cable modem. I am trying to get my laptop, which runs on Windows 7, to connect to the same network without a router via the use of an Ad-Hoc network.
I have created the Ad-Hoc network on my desktop and have successfully connected to it through my laptop. The problem is that although I am connected to the Ad-Hoc network on the laptop I cant connect to the internet. It simply says Access Type: No Internet Access. I have internet sharing on and don't know what to do to successfully connect to the internet via the laptop. When I diagnose the connection it says "The network adapter does not have a valid IP configuration" I have both pcs set to "Obtain IPv6/v4 addresses automatically" and dont know what else to do.
Can Split Cable To Create Own Network
Nov 4, 2012My question is can I split my cable to create my own network? For example my direct cable wire into the home then split it to tv then router to my laptop...
View 1 Replies View RelatedHow To Create A Small Office Network
Jul 26, 2012How do I create a small office network?
View 1 Replies View RelatedHome Network :: How To Create VPN From Mac To IPad
Jan 8, 2013I am trying to create a VPN on my Mac that I can access from my iPad in a remote location (work.) I have been using "iVPN" on the Mac to "distribute" the home Mac's Internet connection to the iPad. I have everything set up right and the VPN works fine and the iPad connects fine, just not when I am work, where I want it to work. The iPad tells me that it cannot connect to the VPN. I believe my work blocks VPN ports (1701, 1723 etc) I can do a google search from the iPad on the work WiFi so the connection is ok, but I believe those ports are blocked. If I connect the iPad to a restaurant's wifi for example, the VPN connects fine. What client can I use to create my own VPN at home where I can use a standard port like port 80 or something that is not blocked at work so that I can connect to the VPN from work?
View 10 Replies View RelatedHow To Create Fiber Optic Network
Jul 23, 2012When it comes to fiber optics my knowledge is very limited. All I know is that they can carry data at high bandwidth for a long range at blazing speeds etc.My boss has asked me to link several buildings to the network and I am led to believe that joining them through fiber optics to be best since we are expecting a lot of data traffic between.I have done the normal RJ-45 networking with Gigabit networking in my organisation but need your assistance on how to join each of the buildings through fibre optics.Draw up the fiber optic lines from the main building to each building.All the buildings have Gigabit Cat6e cabling and network in each.I am planning on using a single mode media converter to convert the end of the fibre optic to the normal RJ45 connector and plug it to each switch at each of the ends of the fiber optic cable .I don't even know the gadgematics required except for the cables them selves, crimping tools, the media converter. There is about 300-400 metres in between of each building from the main building.Also, I believe that we need to create cross over cables as in the normal way we do in connecting 2 switches.
View 1 Replies View RelatedCreate A Network Between VMware And Host OS?
Jan 6, 2013how do i create network b/t vm ware and host machine ?
View 1 Replies View RelatedHow To Create A Local Network With 12 Desktops
Dec 14, 2011How do I create a local network with 12 desktop computers and one printer. then i want the LAN connected to the World wide web. all the computers run a windows xp operating system. Need both the physical set up with less wire view in the room and software set up.
View 4 Replies View RelatedServers :: How To Create Virtual Network With Domain
Mar 10, 2011I am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies View RelatedCreate A Wireless Network Via HSDPA Modem
May 28, 2011I am connecting to internet via 3g HSDPA modem which is connected to my PC. And i have a i touch 4g and i need to get wireless access to it via HSDPA modem, So is it possible or is there any device and a method where i can create a wireless network via HSDPA modem? Btw my PC has Windows XP.
View 4 Replies View RelatedLinksys - Create Private And Guest Network?
Jan 6, 2013I wish to establish a private and guest network for a local business. They have Verizon service with its wireless router plus their own personal wireless router.The Actiontec mi424wr (rev i) wireless router is connected via Coax and will remain the first in line so as not to disrupt the set top boxes (STB) channel guide and other features managed by the Actiontec. The radio is active with an SSID of "ABC-Private" and its network is 192.168.1.xx. The thought is that only business personnel will connect to this router for internet.I have connected their Linksys WRT54GS to the LAN port of the Actiontec, using a static IP which I have allocated in the Actiontec's DHCP pool for this purpose. This radio is active with an SSID of "ABC-Guests" and its network is 192.168.2.xx. The thought is that only patrons will connect to this router for internet.
My overall goal is that business personnel will have unrestricted access to the internet AND to each other¦ while patrons will only have HTTP and HTTPS access to the internet¦ and no communications will be permitted between the two network subnets. I realize there are hardware firewalls designed for accomplishing such a goal, but the business hopes to avoid the additional expense, if the aforementioned model can provide this capability.In order to accomplish this goal, my remaining tasks as are follows:
1. On the Linksys, permit only http and https traffic (and whatever else the patrons would need/want).
2. On the Actiontec, deny Linksys IP address access to everything except for the Actiontec gateway.
Hamachi Doesn't Create Or Join Network
Mar 13, 2011I've been trying to get it to work all day.When I open up Hamachi it shows the main screen with two buttons. Create a new network and Join an existing network.I've tried both but when I click create or join it doesn't do anything. Like it actually does nothing at all.Doesn't even close the window.Everything stays open and it doesn't either create or join any networks.
View 1 Replies View RelatedWan't To Create 2 Wireless Network With Single Router?
Sep 25, 2012I am using D link DIR 615 router for my network. My ISP sent me a letter few days ago that they can provide me total separate wireless connection other than my regular connection. But they will charge me $10/month for this. just wondering do we have any way to create two separate wireless network so that my clients can access that free wireless connection when they are in my store. But on the other side they don't interfere with my regular connection and its good for my network security too.
View 8 Replies View Related