I am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able to access it and attempt to set it up. However, once I tell it how to connect to my main wireless router, and it attempts to log onto my wireless network, the RE1000 disappears from my list of networks. My blu-ray player also cannot see it.
I have new DIR-615 D-link router. Since we installed it the network has disappeared randomly off the available networks list, and when I try and open Google Chrome it says there's DNS error. Troubleshooting through windows networks doesn't work because it can't find any problems since my network doesn't even show up on the list. We've even done a factory reset and the problem persists, and it does this about once a day. Resetting the router temporarily fixes the problem. This problem is happening on all 3 laptops in our home, two of which run windows 7 and one which runs XP.
I am facing a problem since today as my WiFi is turned on, but i cannot view the list of networks that is available in my workplace. When i asked my colleague whether he could view the list in his laptop, he was able to. And also when i checked through my smart phone i was able to view a list of wireless networks. So it means there is some error in my laptop. I realised this when i tried creating a AD-HOC connection which eventually resulted in 'Windows cannot set up NETWORK NAME'. Why is it that i am not able to view the list of wireless network? And why can't i establish a AD-HOC connection?
I have problems with my D-Link DIR 635 router. It shows up fine in list of networks on my girlfriends Mac and on my new laptop, but on my older laptop it doesnt show up at all (whereas a lot of other networks do). Seeing as my current laptop is being repaired at the moment, I need to be able to connect to the net with my old laptop too.
I run Windows XP Professional on my laptop, which is a Compaq Presario f700. why the network doesnt show up?
I have a ASUS PCE-N13 card I am trying to connect to my N network. It is a Netgear WNDR3700 v2 running DD-WRT. It does not even show up in my list of networks, yet I see a neighbor's N network. I updated the drivers and I still do not see it. .
I have never had to do anything to connect to my fathers netgear router or my own netgear router. I would just turn on my pc and have internet. After my brother touched my computer it no longer recognizes any wireless connection. My internet provider says that I need a new router. I don't think that is the problem because after my brother played with my computer it was unable to see any connections (not even neighbors which I normally see). This makes me think something is wrong with my computer not the router.
PS. I do have my wireless switch turned to on. My brother doesn't know what he did but will not be allowed to play with it again.
I have wireless internet at home through a Belkin router.It used to work fine but one computer wouldnt connect. I tried checking the security password on my laptop and ever since it won't connect. (However, now the other computer does!) It picks up the signal from the router but just won't connect. When I run ipconfig I get a message saying Media Disconnected. I've searched forums and can't find an answer to this.The laptop still connects to the wireless internet in my office so the wireless capability obviously still works.
I have a BEFW11S4 router when to put in password for the router and must have had a typo as I can no longer access router.Tried the factory reset on the rear of unit to no avail. Is their any way to get access as I have the main computer wire to the router. I need to get into the unit to move the channel number.
My Dell Dimension is no longer connecting to the internet via the wireless router. I have a dlink DI-524 and a dlink wireless USB key but it no longer connects. This just started today. When I try to repair the connection, it fails on "renewing IP".
OS is Windows XP.
P.S. I have tried power cycling the modem/router but nothing works. Other computers can get on the internet via the wireless router fine.
Been having random connection drops for the past few weeks where I would see the network connections to the router just drop either on a wireless connection or a wired cat 5 connection. As of tonight I cant connect to the router at all. If I disconnect and reconnect the power after 30 seconds it will come up for a short time but then I will lose it again. linksys as my router is out of warrenty. I'v searched around for similiar problems people have been having, but it seems like mostly involve just the internet connection. I still have the same firmware for the routers as the day I purchased it and the router sits on my desk in a ventilated area not overheating. I can do to further diagnose the problem, I have even tried resetting to factory defaults. I try to diagnose the problem or see if my router is just dead.
My E2500 was working great for the past 3 months, and now it seems to be broken since I cannot access the internet anymore. I can connect to the router via wireless or wired at 192.168.1.1 and play with all the settings. On the status page, I have entries for Internet IP Address, Default Gateway, DNS1, and DNS2 as though I was connected fine to my DSL modem.If I connect my computer to my DSL modem then I can access the internet perfectly fine, so I know the modem is working. However, if I connect the E2500 to the modem, and then my macbook to the E2500 then I cannot access anything other than the router config pages. I have also tried, from the router admin page, to ping "www.yahoo.com" and "220.127.116.11" to no avail.
I have tried without success:
1. Renewing IP address from the router status page.
2. Cycling the power on the modem.
3. Rebooting the router.
4. Unplugging the power from both the modem and the router for 10 minutes and reconnecting it.
5. Resetting the router by holding down the reset button for 30s.
6. Using a different computer.
7. Turning off the firewall.
8. Reinstalling the firmware (1.0.01 build 3 May 6, 2011)
I mistakenly downloaded and installed version 4 firmware when i should have installed version 2. My system (windows ver. 7) no longer sees the wireless router (WRT54G). I no longer have the install CD and the version 2 firmware does not seem to be available on the website. Is my router now dead in the water?
I bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?
After I had Prism high speed internet installed (made by Cisco) and I can no longer print using my Dell V313s Wireless printer. I have lost the driver disc that came with the printer and Dell wants to charge me a large fee for support and Prism states that they are not responsible for the printer not talking to the computer.
I have had no problems with the WUSB54GS connecting to the WRT54GS up until last Friday...it can no longer connect to the router and reports that the network cannot be found.When i refresh the list of available networks i can "see" the router on the wireless PC but when an attempt to connect is made,it fails.OK,i rang up Linksys tech support today and we tried everything possible to work out what the problem was e:g uninstalling/reinstalling the software,updating the routers firmware,disabling security,trying all channels 1 thru 11,using WEP,using WPA,changing SSID name,using secure easy setup,using windows wireless configuration,changing USB leads nothing will make the device connect.
I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.
I have had my router for at approx. a year and a half and it has worked flawlessly. Now my PC which is plugged into the router still works fine, I'm just not able to connect wirelessly anymore. I've tried the basic things like unplugging and rebooting, nothing changes. The lights still say it is transmitting.
I had a simple PPTP VPN server running behind my old DLink router. When I installed the E3000 the VPN clients could no longer connect. The port forwarding for PPTP is turned on and VPN passthrough is enabled. The PPTP server reported GRE47 checksum failed. The linksys chat tech was not beneficial. How to get a PPTP route to work?
For some reason I can no longer make Wi-Fi calls with my E1200 router. I have checked with my ISP and T-mobil. They both tell me that everything on their respective ends is working correctly. The only piece of the equation is the router.
I'm trying to fix the network at a student housing building and the system is kind of a mess. We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to. We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work. Switch back to the old router and presto. How do I need to change the settings with the E4200 to get it to work?
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?
After updating the firmware of th EA6500 to Ver.18.104.22.168072 I have no longer access to the GUI options of Speed Test, Guest Access, Parental Controls, Media Prioritization and USB Storage. I have reset the router to factory default settings and still none of the items are showing on the web page the only options available are:Connectivity,Troubleshooting.Wireless.
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
I have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP. All of a sudden yesterday, neither PC could access the internet. No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem. That worked and I was able to access the internet. However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting document ion. The lights that should be lit on the router are lit. I can access the router setup web page which shows the settings still intact. I've tried going through the power sequencing to no avail. Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working. My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do? Are there any other diagnostic tools available? I'm out-of-warranty.
I have an E1200 model 1 router. I've owned it for over a year and it's given me no problems until now...Hardwired ethernet connections work fine, but the wifi no longer works consistently. I have several wireless-N wifi devices that either cannot connect to the router at all (they present an error message), or do connect but will not load anything over the connection, or will load web pages very very slowly and then suddenly drop the connection.When I go to the DCHP client table, I see all of my ethernet connections but it does not show any wifi devices, even if the WiFi device is showing a connection to the router.The wifi connection is secured via WPA2 Personal.I have tried changing channels to one that was not congested with any other nearby routers. I have also tried a 30-30-30 factory reset. I am updated to the latest firmware version (1.0.03). I am sure I am entering the correct pass phrase to connect over WPA2. All of my wifi devices are confirmed to be wireless-n, not g or b.
I have a laptop with an Intel Centrino 6300 Ultimate-N wireless card. With the previous firmware I was able to reach 300mbps while on the 5GHz band. Since I updated my E3000 to the latest firmware (1.0.04) I can only reach speeds of 144mbps. I have done a factory reset on the router and stll get the same result. Is there any way I can get it to reach 300mbps again with the current firmware?
Also, yes I have uninstalled / updated the driver software for my wireless card. I have also changed the appropriate settings for the 5GHz band. (40MHz channel width, using WPA2 encryption)
Every day or two my landlord's router just seems to disappear altogether . just seems to turn itself off randomly. Unplugging to reset results in good, clear signal for a while, but the problem always comes back. It affects all connected machines (not sure if it makes any difference if a macnine is connected via wire.)
I just updated Cisco software and my external hard drive is no longer recognized by Cisco. It is a Seagate drive that is listed on the Cisco tested - passed - approved list. It worked prior to this update. I have disconnected the drive. Reconnected it. Rebooted. Turned machine and router on and off and its still not recognized.
Model name: Linksys E4200 Model number: E4200 Firmware version: 1.0.03 build 14 Operating system: Windows 7 SP 1 Software version: 1.4.11266.0 Connection type (WAN): DHCP
When starting my laptop it no longer connects to the preferred network. It has been trying to connect to my neighbors unsecured network. I have tried the netsh settings but it searches for another network and will not connect to the one it is supposed to unless I force it to.
I have a file server running windows 2003 and five computers (1 windows 7, 4 windows xp-sp3).There are two shares on the server.When the router is setup with wpa2, three of the windows xp machines will have problems with mapped drives. Directly after the drives are mapped, everything works, but 10 or so hours later, users can no longer access these mapped drives and there is no way to reconnect them it seems.The other two machines (windows 7 and one windows xp machine) have no problems whatsoever.
The only thing that the three computers have in common is that they are also sharing a printer (an hp j4680) attached to one windows xp machine (not the server).If I set everything to wpa, everything works fine, but of course my wireless network speeds drop to 56mbps.