Routers / Switches :: How To Bridge Two Networks Using A Router
Mar 4, 2012
I live in a school residence with a roomate and we both have an internet connection in our rooms but it's two separate networks since we can't see eachothers pc on the network. Both our pcs are connected to a switch and those switches are connected to the two internet connections. I would like to know how to bridge those two networks using a router in the living room. I would also connect a printer and an xbox to the router so we can both access the printer, the xbox can access both pcs and we can access eachother's pc.
View 3 Replies
ADVERTISEMENT
Jan 27, 2012
My ISP insists that in order for me to have a home network use their router/modem ("2-Wire") for internet access, I must make my own network router act as a bridge since their modem is acting as the router. I.e. she said put your router into bridge mode. I don't know how to do that and Linksys won't offer assistance.
View 6 Replies
View Related
Sep 14, 2012
I installed DD-WRT on my router and placed it in bridge mode, configuring it with what I thought was my Androids IP address for the gateway. I tried with the Android IP address identified through cmyip.org, 208.54.32.156, and with the one identified through ipconfig command, 192.168.43.1. Neither address was successful. Also, I am unable to access my router using the IP address that I manually assigned to it.provide some assistance on the process of bridging from an Android to a wired PC through a router, Linksys WRT54G v3,
View 1 Replies
View Related
Jun 13, 2011
modem
........ |
........ |
----switch-----
|................ |
|................ |
Router 1.... Router 2
|..................... |
|..................... |
Computer 1.....Computer 2
......................Computer 3 Router 1 points to a VPNRouter 2 access to the internetComputer 3 needs to access router 1 (VPN). Both Computer 2 and 3 are in a different room than computer 1, and router 1. Computer 2 is networked via cat5e to router 2.Is is possible to have Computer 2 and 3 share the cat5e, yet access different routers?
View 5 Replies
View Related
Apr 20, 2011
i was trying connecting two LAN network on different location.
View 2 Replies
View Related
Jun 25, 2012
how to communicate between different networks in router .I know by using BGP we can communicate only in the same network only.
View 2 Replies
View Related
Apr 26, 2012
i want to ask if i can link two routers while they are totally separated of each other over the internet to make a large LAN the two routers are TP link?
View 5 Replies
View Related
Jan 4, 2011
One of our office´s PC is connected to the network and shows 2 networks, but we have only one modem and one router....and no internet access only in that computer. I had restarted, disconnected, shut down and nothing.....what can I do? I also connected it to another cable form other computer working correctly and didn´t work.
View 4 Replies
View Related
Aug 6, 2011
My workplace currently has one AD Forest. Slowly we have drifted in to two slightly separate businesses and my boss wants us to create a new AD Forest and segregate the users doing each business. Although we will all be in the same office, each side will authenticate to a different DC. The problem is, that we have some resources that still need to be shared and I would like to share them as eloquently as possible without converging the networks too much. The two networks will be in the same server rack but they will logically appear as this:Forest1.local (original)
-Cable Internet -- Router A (192.168.1.x) -- 48-port switch A -- PC/Phones/Domain Controller AForest2.local (new)
-Cable Internet -- Router B (10.1.1.x) -- 48-port switch B -- PC/Phones/Domain Controller B.
The problem I have is that the users in the "new" network need access to a shared folder, shared customer DB, and shared printers on the original Domain Controller, named "DC A" above. I have complete control over both networks but cant figure it out the best way.My main concern is physical access between the networks. How will a pc on the 10.1.1.x network know where printer 192.168.1.2 is? I thought about creating a forest trust in order to assign proper permission but how will they resolve the names on a different subnets? The two "routers" are just simple SOHO type routers so I cant do much there. I thought about connecting the two switches together but don't know if that would work. Wouldn't the data just get passed to the default gateway (router) anyway. The router would then just drop it. I also though about using the 2nd NIC in each DC and connecting them in each other's subnet. But again Im not sure if it matters if the DC's can reach each other or if the PC's would have to be able to reach the other subnet etc. I also thought about just creating some kind of VPN (hamagachi) or whatever to go out into the internet then back into the other router to the network.The problem is wouldnt every computer wanting to access the shared folder have to have this setup. I would like to limit setting things up on workstations and just limit config to the DC's if possible.I basically just want users in subnet two to be able to map a drive and access printers on DC in subnet one.
View 3 Replies
View Related
Mar 7, 2012
Two networks. NetA: IP subnetID 10.101.x.x subnet 255.255.0.0. Devices have static-assigned IP's. Only DHCP runs on wireless AP for wireless client connection. IP addressing scheme set by hardware vendor, so not under my control. NetB: IP subnet 10.x.x.x subnet 255.0.0.0. Campus LAN and also not under my control. DHCP supplied addressing. how to get NetA devices to route to NetB?I would like to be able to provide Internet access (via NetB)to NetA devices.
View 7 Replies
View Related
Jan 23, 2011
I'm going to move offices into a shared situation with 3 companies. Each company will want its own private network so there's no snooping between companies. I am planning on using VOIP for the phone system (Nextiva cloud based). Is it possible to set up the system so that each company has access to the VOIP system but yet remains sequestered in the their own network for everything else. I was hoping to do this with one data port at each workstation using Cisco SPA-303 phones. The way I understand this, is that the phone plugs in to the data port and you daisy chain the workstation off from each phone. Is this possible to do this while having the system I described? Another wrinkle is that I'd also like all the networks to be access shared printers.
View 7 Replies
View Related
Sep 14, 2012
how do i create 2 networks using 1 cable modem and 1 router and i would like to add a firewall thinking of using xywall usg20 for the firewall..... the issue is i have a small business with 1 point of sale and1 back office computer.(network1) and i would also like to use an air port wifi to offer wifi to my cleints on a seperate network(network2) not allowing access to network1 and i want a firewall on network 1 to protect the back office and pos system
View 4 Replies
View Related
May 20, 2013
Im using 2 TP-Link TL-WA7510N to bridge a internet connection the connection is using a captive portal for my guests via pfsense. What i would like to do now is run a pc on the same connection without using the captive portal .So basicly i would need 1 secure network for my single pc and the one with captive portal for my guests.
View 1 Replies
View Related
Aug 4, 2012
We have 2 DHCP controlled networks at our work:
Network 1: EOC connection. We use this for Internet access, office computers, a POS server and our POS systems. Mostly windows xp and some win 7 systems. Server is Windows 2008 server, but is not controlling DHCP nor a domain. It's just a computer on the network. Directly behind the EOC box is a router using DHCP to manage a 192.168.1.x network. All computers on this network are using 192.168.1.x addresses via DHCP.
Network 2: Comes in on a separate DSL line. Primarily a Linux network controlling several linux based machines. This network has it's own router behind the DSL modem managing DHCP using 175.69.1.x (or something close to that) addresses.
Someone decided to "bridge" these networks by simply plugging each network into the same switch via Cat 5 cable. Bad idea.
The first problem we had (of course) was that the DHCP servers conflicted immediately, so we had to set half of this "mongrel" network to static IPs like 192.168.1.x, and the other computers are getting their addresses via DHCP from the 176.68.1.x network router.
This works - badly. The second router keeps "resetting" the server address on network 1, screwing up our POS systems. But we still need to access the linux machines on network 2 (via http) from the office machines on network 1.
I am thinking the solution to this issue is to place a 3rd router as a bridge between the two networks. Is this correct?
The goal is to be able to be sitting at machine 192.168.1.x on one network, open a web browser, type in a 176.67.1.x address and have the linux web-based application come up from the other network.
View 1 Replies
View Related
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Apr 23, 2011
how to connect two subnets with two switches and one router using router sim software?
View 1 Replies
View Related
Feb 27, 2012
Using a Linksys E2000 and Linksys WRT54GL (both flashed to most recent firmware), I am trying to set up Network "A" and Network "B" on one modem. I do not want either A or B to be able to see each other for security purposes. Both are secured networks for the wireless connections and have different SSIDs.
After online research, and the inability to find my exact question answered, this is what I did and I'd like to know if I'm missing anything to keep A and B completely separate. Or, if I've done anything that will cause any problems on my network. [code]
I disabled the ability to change settings using wireless connection on both routers.
View 9 Replies
View Related
Dec 31, 2012
Is there a way to Bridge N600 DB Wireless Dual-Band N+ Router F9K1102?
View 1 Replies
View Related
May 22, 2011
My ISP is providing me with 1 public IP on a /30 network and 14 public IPs on a /28 network. In this example the 10.0.0.1 is the default gw provided by my ISP and 10.0.0.2 is my SF300-08. If I setup my router to route to 10.0.0.2 as the default gw through the interface between the switch and router, can I configure the static routes in the switch to route further to 10.0.0.1?
is it possible to have these 2 networks on different VLANs and configure inter-VLAN routing? I don't want the switch accessible from the 10.0.0.2 IP.
View 3 Replies
View Related
Sep 1, 2011
We have 2 separate networks here, 1 for data (192.168.0.x) and 1 for VOIP phones (192.168.3.x).
I need them to both be connected to different ports on a switch (Cisco SG 300 10 port managed switch) which is then linked to another switch (Cisco Catalyst 2960 48 port switch). Then on this 2960 switch I want the link to be split back into the 2 separate networks. I think that I need to create 2 separate VLANs and assign them to different ports.
View 2 Replies
View Related
Jan 19, 2013
We have a two separate businesses in the same building who will both need access to shared resources and the same internet connection. They will need to remain on separate subnets and cannot communicate directly to each other. The current switch is a Cisco ESW-520-48P and we are looking at purchasing an SG-300-20P for the new business moving in. Heres how we envisage setting it up:
ESW-520 will host Company A's network. Workstations, servers etcSG-300 will have two VLANS. VLAN1 will host all Company B's network. Workstations, servers etc. VLAN2 will host the shared resources such as printers. The internet gateway is a UNIX based system with 3 NICS. 2 NICS are taken up by ADSL connections while the other NIC is the LAN, which would connect to VLAN2 on the SG-300. We would like to define which ADSL connection to route through depending on which subnet traffic is originating. The ESW-520 will need access to the shared resources and internet gateway on VLAN2 on the SG-300.
View 4 Replies
View Related
Feb 16, 2013
I config vlans 21-23 on 3750 A and B switches.I config B switch to be Root Bridge for all vlansspanning-tree vlan 1,21-23, priority 4096 sh span tree on B switch 3750B# sh spanning-tree.
View 18 Replies
View Related
Jun 14, 2011
Can I run two networks, ie 192.168.1.xxx & 192.168.2.xxx, on the same switches. Certain PCs on the network will be set up for .
1 and others .
2. Each network would have its own router. I know I can't have DHCP on both routers,
View 3 Replies
View Related
Apr 29, 2011
i have a router connected to my ISP which can get me 2 different IP's at all times (the router gets one IP).Now i want to get my computer to have a different ip as my router has (seen from outside my home network) - i want my computer that accesses the internet through my router to have a different IP as my router. I know that if my computer gets it's IP from my router's subnet, then it will (seen from outside) always have the same IP as my router. So the question is how do i get around this ? Do i just have to change my PC's DNS / gateway settings to match my router's ? The PC is connected to my router via wifi. Or would forwarding some ports on my router work ?
View 3 Replies
View Related
Jan 14, 2012
I was just wondering how to wirelessly bridge 2 routers so that I don't have to drill a big hole through the wall!! I have a netcomm router which is going to be the receiving modem and a net gear modem to transmit the wifi.
View 1 Replies
View Related
Jan 25, 2013
I just configured a 2 computers into a routers and and connected them to each other. My computer is them connected to one of the routers(configured PCs). The computer uses the default gateway of the router interface it is connected to. A ping to the default gateway repplies positively. A ping to the second interface to the same router goes successful but a ping to the first interface of the second router gives the "request time out" respond and a ping to the second interface of the second router gives the "destination host unreachable" respond.
View 1 Replies
View Related
Mar 3, 2013
I want to connect 2 routers like this picture.No need to have it as separate networks.
View 3 Replies
View Related
Jun 16, 2011
i have two linksys wireless router on different networks that i want to connect. how do i go about it?
View 1 Replies
View Related
Jul 13, 2011
My network routing (both routers are consumer-grade NETGEAR WNDR3700) is like this:
Modem ==> Router 1 ==> Router 2 WAN Port
I have Router 1 set to DHCP the entire home network. I want Router 2 to section off a web server from the home network in case it gets compromised, but I want computers on the home network to be able to administer the web server.
As it stands, the web server can access PCs on Router 1, and not vice-versa. In effect, I want this to be reversed. Can this be done without changing the physical configuration?
All right, I bit the bullet and switched the router chain so Router 2 comes before Router 1. Set up was so easy and though it's not perfect, it's all ready!
View 4 Replies
View Related
Jan 1, 2012
where is the wps button on router
View 2 Replies
View Related
Feb 28, 2011
I am trying to get into router to allow my VUDU box to connect so I can download movies,
View 1 Replies
View Related
Feb 16, 2013
i cant use a new tablet i bought due to i can't remeber pas word for router it was such a long time ago it was installed
View 2 Replies
View Related
Mar 30, 2011
i have a pppoe connection coming through ethernet line. i.e i need to use dialer that i have created on the desktop..and i have bought a new Linksys E1000 router v2.1..now my problem is that1) After entering all the settings correctly my router worked for 3 days after that the net is not working.i.e it cannot connect to the internet keeps giving the error cannot get IP from PPPOE(i have connected my router in pppoe mode and use the router status page to connect and disconnect)I have also updated the router to the latest firmware 2.1.01 and after that the problems have started.My Net works if i directly plug the Ethernet cable in the PC.the problem starts when i connect it to my router.
View 3 Replies
View Related
