......................Computer 3 Router 1 points to a VPNRouter 2 access to the internetComputer 3 needs to access router 1 (VPN). Both Computer 2 and 3 are in a different room than computer 1, and router 1. Computer 2 is networked via cat5e to router 2.Is is possible to have Computer 2 and 3 share the cat5e, yet access different routers?
I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.
Although we have a moderately wired house with cat6 cables runs in many of the rooms that all end in the basement, I am currently having trouble since I cat stream audio and video files from my desktop in the den to the netbook and receiver in the family room. All computers are hooked up by cable.I have tried a friends advice to plug in the exact IP address of the desktop (and vice versa on the netbook) but still the netbook cat find the desktop nor can the desktop find the netbook. I have tried home sharing in Windows 7 to no avail as I have been prompted to initiate a home network both on the netbook and the desktop when I think it is suppose to be initiated on one machine and same home network joined by the other.DSL Modem --> Linksys WRTGL router running Tomato --> switch -->various rooms (cont.)Family room (one of the various rooms) has a Buffalo WZR-HP-G300NH AirStation (with one USB port) --> 1) netbook and 2) Denon AVR receiver (with network capabilities)I have a switch in the den and the desktop and laptop computers can read off each other through folder/drive sharing even with Kaspersky Internet Security running in the background so I'm sure it's not Kaspersky meddling with my network sharing. If both are on the wireless network, the netbook can access the desktop and vice versa.Is it possible for the netbook to read off the desktop based on my current set up? I can't bring the desktop down as we use them in the den and will not have room for it in the family room. I am not inclined to purchase a stand-alone HTPC at the moment if there is a network sharing
I live in a school residence with a roomate and we both have an internet connection in our rooms but it's two separate networks since we can't see eachothers pc on the network. Both our pcs are connected to a switch and those switches are connected to the two internet connections. I would like to know how to bridge those two networks using a router in the living room. I would also connect a printer and an xbox to the router so we can both access the printer, the xbox can access both pcs and we can access eachother's pc.
My ISP insists that in order for me to have a home network use their router/modem ("2-Wire") for internet access, I must make my own network router act as a bridge since their modem is acting as the router. I.e. she said put your router into bridge mode. I don't know how to do that and Linksys won't offer assistance.
I installed DD-WRT on my router and placed it in bridge mode, configuring it with what I thought was my Androids IP address for the gateway. I tried with the Android IP address identified through cmyip.org, 220.127.116.11, and with the one identified through ipconfig command, 192.168.43.1. Neither address was successful. Also, I am unable to access my router using the IP address that I manually assigned to it.provide some assistance on the process of bridging from an Android to a wired PC through a router, Linksys WRT54G v3,
I can telnet to switch from checkpoint firewall access port and from switch directly. I can ping/traceroute successfully to the switch. Access-lists 14 & 15 are allowing the traffic I want. The router on the other side of the FW has 2 static routes and a default static route set up.
Here is some of the config from my switch:service tcp-keepalives-in
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
aaa authentication login default local enable line none[code].....
Not sure of checkpoint firewall config....I have run wireshark when trying to telnet and I get no syn-ack back from remote switch. Just 3 consecutive syn attempts.I have some switches I can connect to and they go right through the 3 way TCP handshake and I cannot find any differences in the configs between the successful connections and the unsuccessful connections.
I have two windows 2008 machines on vmware. I assign 10.0.0.1/8 and 10.0.0.2/8 to them. Both connected to same virtual switch. Now should these two PCs ping each other? In my case they dont ping. What i get is Repy from <ip address>: Destination host unreachable.
Running EIGRP on network. Hub router connects to remote router via EIGRP and then I have 2 static routes getting traffic to the switch behind the checkpoint firewall(Edge-1 UTM). Some switches I can access while others I cannot.
would like to know how a bandwidth gets distributed in switches.for example consider a scenariowhere i have a coreswitch A and coreswitch B connected between each other througha a 1Giga Fiber, now each of my core switche are connected to two edge switches through fiber links. all edge switches have giga ports. now if i connect a pc with giga link in th edge switch of coreswitch A and tansfer a file to a PC connnected to the edge switch in network B.. how much bandwidth would i get?how does the switch allocate bandwidth?
I have a qsee dvr that is hooked up to a switch that is connected to a wirless router/modemI have forwarded the correct ports that I need to according to qsee, ports 80, 9000 and 100I can access the dvr from any computer on the network via its local ip address, but when I try to access it via a computer off of the network via the real world ip address of the network, I cannot access it. I can ping the real world ip address of the network and it is successful.
I have a Modem/Router combo and am trying to plug an 8 port switch directly into it and then have wireless AP's and other hardwired devices plugged into the switch. Normally, when I plug a switch into a router it requires no set up. This one on the other hand, will not work.
ISP Cable in Smart box. 4 cat 5 cables from various rooms in house to feed cable ready TV's and one from my computer room. Can I connect all cat 5's to switch that is connected to cable modem located in Smart box and connect Wireless Router to cat 5 in the computer room and expect router to work properly?
I have a dell powerconnect 2848 switch and setting up a vlan 3 an make port 1 mngt, port 48 uplink to layer 3 switch and tag vlan 1 and 3 to port 48 with cli commands for this setup. and also to untag ports 2-10 for computers
192.168.1.1 is a Linksys WRT610N acting as a router and DHCP server for addresses .100 to .150 192.168.1.2 is TEW-639 with DHCP turned off and connected to the Lynksys via one of the LAN ports.
I then have a FosCam camera with IP 192.168.1.010, connected either wirelessly or via a wire on a LAN port to the TEW-639W.
Here is my problem: If the FosCam is connected wirelessly to the TEW-639W I am unable to see it from any device connected to the Linksys. If I connect the FosCam via a wire to a LAN port on the TEW-639W then I can see it from a device connected to the Linksys device.If a device is connected to the network via the TEW-639, I can see the FosCam whether it is hardwired or wirelessly connected to the TEW-639. What am I doing wrong?Why can I not see the wireless connections on the TEW-639 from a Linksys connected device?,The setup is that the internet comes in and is connected to the Linksys, which then via LAN cable and LAN ports on both devices is connected to the TEW-639, which is then connected to the camera.
I am migrating an a group of workstations that run a fire system from one software to another. The current workstations run the following info:123.123.123.xxx 255.255.255.0The new workstations run:100.100.100.xxx 255.255.255.0There is a central switch location using a GE-DSG-244 Layer 2+ Managed switch. There are two remote location using GE-DS-82 Managed Switches.The two networks must remain isolated, yet use the same fiber communications. The central switch connects to the two location using MM Fiber. From my research I believe I need to use the 802.1q standard to allow port trunking between the two switches.
I work in a school department and wanted to hardwire two computers in my class using a workgroup switch. I only had one data port in my class. The tech guy told me the switch could cause the entire network to crash. Is that true? I thought a switch was just a passthrough device.
I went out and bought a linksys 5 port workgroup switch. I tried to hook my internet into it and my other computers into it , THINKING, I would be able to get internet on all. No go. I can get inter net on one, as you can tell. but all others nothing. and to make matters worse i got win 2000, win xp pro, and linux that I like to get online.. I have : renewed IP's assin Ip's refresh, purge dns. rebooted. all and rebooted in diferent orders. double checked connections, tested all lines. The network is on a rj45 ethernet .
Have one switch and network.PC number one have win98 and network adapter and connected to the switch.PC number two have winXP and network adapter and connected to the switch same as win98.Network works on win98 and winxp they see each other.internet working on winxp but dont work on win98
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.