Cisco VPN :: 871 VPN Router To ASA 5500 Only Sees Some Networks
Mar 30, 2011
We have an 871 vpn router conntected back to our main facility ASA5500. The VPN tunnel seems to come and go for no reason we can find.
The weird thing of all this is that we can only ping some subnets and not everything even though we alow all networks to be routed.
This is one of those things we keep looking at but for some reason just can't find the problem. Hoping another set of eyes spots something obvious.....
Config below
Current configuration : 9347 bytes!version 12.4no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime localtimeservice timestamps log datetime localtimeservice password-encryption!hostname Lincoln-Office!boot-start-markerboot-end-marker!logging message-counter sysloglogging buffered 64000enable secret 5 xxxxxxxxxxxxxxx!aaa new-model!!aaa group server radius ACS server 10.2.2.201 auth-port 1645 acct-port 1646 (code)
View 1 Replies
ADVERTISEMENT
Feb 11, 2011
My wireless adapter sees all the networks within range but I am not able to see them listed under windows network connection and there cannot connect even to my own network.
View 1 Replies
View Related
Apr 11, 2011
I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
View 3 Replies
View Related
Dec 29, 2011
I mistakenly downloaded and installed version 4 firmware when i should have installed version 2. My system (windows ver. 7) no longer sees the wireless router (WRT54G). I no longer have the install CD and the version 2 firmware does not seem to be available on the website. Is my router now dead in the water?
View 1 Replies
View Related
Aug 28, 2011
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....
View 4 Replies
View Related
Jun 15, 2012
My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).
View 9 Replies
View Related
Jan 26, 2012
I had an Iomega 1TB External Hard Drive connected to my E4200 router. I had shares confgured and they were properly running on the network.
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
I rebooted the router and it still does not work. I've connected the hard drive directly to my PC to verify that it works there, and it does. The router is running Ver.1.0.03 (Build 14) of firmware (the latest).
View 9 Replies
View Related
Mar 11, 2012
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies
View Related
Jun 3, 2011
My LAN has 2 Vista, the new 764 and an XP machines. Last night, I created IRPStackSize and set it to 16 and it fixed the access problems all the other machines had w XP. This AM, teh 764 does not see the XP again, but teh 2 Vistas can still read & write to XP. Increased IRPStackSize to 32, but that has no effect.
The 764 "sees" V2 [one of the Vista machines, the newer, 2nd one] but cannot access any of the shared folders on it. It gets Error 0x80070035: network path not found. This AM, I disabled several AV & spyware programs on V2 and ran uSoft's FIXIT pgm and something "fixed" it. Rebooted V2 and the problem/failure is back. V2 can still read/write 764.
On all machines, C: is shared w all permissions to 'everyone'.
Looks like 2 problems to me. They seem like 764 problems since other computers on teh network do not have these problems and both things the 764 can't see or access have no problem accessing 764 files.
View 2 Replies
View Related
Jul 18, 2012
I have a bt home hub. When I look at wifi networks I only see the hub. I want to take my laptop out so how an I check it will see other networks when away?
View 1 Replies
View Related
May 2, 2012
Have a Vizio tv that can see the wireless - NetGear router. The internet service is through HughesNet. Laptop, iPhone, and iPad have no issues connecting to wireless.
View 1 Replies
View Related
May 19, 2011
Ok BEFSR81 (192.168.1.1) is connected to the Modem. I have a cable from one of the BEFSR81's LAN ports going to WRT54G (192.168.2.1) WAN port. My computer is connected to the BEFSR81. I can not access the setup page (http;//192.168.2.1) from my computer, maybe I am not suppossed to be able to do that. The Laptop sees a Linksys wireless connection, but there is a yellow exclamation point over it.
View 7 Replies
View Related
Apr 15, 2011
Have Win 7 on a desktop and laptop. Tried several ways through network wizard(novice on PCs) to setup network and no internet connection with either unit. The router sees the internet and the laptop picksup the network I setup but can not connect on either PC. I know I don't have a setting write and I do not know where to start again or what specifically to look for. We just want Internet on both PCs.
View 7 Replies
View Related
Sep 23, 2011
I've been running WHSV1 for at least 3 years now without any problems. Upgraded my client to Windows 7 and stream movies etc.. no issues at all. I gave "guest" account enabled with full access on the WHS server machine and just mapped theshares on my laptop..Anyway, I did some updates on my windows7 laptop and now the computer can no longer see the "server" machine."Server" appears in "other devices" in windows explorer but I can't do anything with it. Just takes me to a page server.com by godaddy.Also, I can no longer use RDP from within my own network! Says the SERVER machine does not exist.I can log in to the server just fine using logmein.
Also, made sure the windows machine has the network that it joined set to "home." I've had a similar problem years ago when I used to use zone alarm but I don't know how to fix it now. It's as if a firewall is blocking it or something.
View 6 Replies
View Related
Jun 25, 2011
I'm desperately trying to set up my old D-Link DI-524 on my parent's Toshiba laptop...I'm visiting and going thru withdrawals! I've installed it, run the wizard etc but it doesn't work...not even wired. I've tried various cable configurations and I get nothing. Both cables are good and work just fine connected to the modem. I've reset it a few times, upgraded the firmware and still nothing...I'd think I'd at least get it to work hard wired. My laptop can see the network I set up even...but no data transmission. I'm not a wireless expert, but I need to become one fast!
View 3 Replies
View Related
Jun 7, 2013
Router is a Model F9K1105. Two PCs, a MAC laptop and two TiVo DVRs have connected without any issues. Printer SEES the network but will not connect.
View 1 Replies
View Related
Feb 27, 2012
Does X3000 sees both disk in an external usb enclosure with JBOD disks?
View 5 Replies
View Related
May 11, 2012
I have two networks that are on two different IP ranges, sharing an ADSL internet router.I can make the two networks access the internet through a Windows 7 PC acting as a router with two NICs, but I cannot print to a shared network printer (build in NIC in the printer).This is how it looks.
ADSL router IP:
IP address: 10.10.10.253
Subnet Mask: 255.255.255.0
Network A computers:
IP range of: 10.10.10.XXX
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.10.253
[code]....
Note: All the computers can access the internet just fine, it's only the one set of computers on IP range 172.16.0.XXX that cannot see the printer.All computers are Windows 7 32bit Professional.
View 2 Replies
View Related
Dec 14, 2012
*-my router is a sonicwall nsa 2400. (ip: 192.168.0.7)
*-my network adresse is : 192.168.0.X /255.255.255.0
*-all computers in my network are using stat ips (not my fault, and i can not change this fact).
Question: Can i add a new network range (not physical wires ) in this router expl 192.168.1./255.255.255.0 X with DHCP,and link it to 192.168.0.X so two computers in this differents networks range can talk to each others ?
View 3 Replies
View Related
Jun 18, 2011
I have a cable modem, hub and two routers. One router is wireless and the computers on this router have an IP address of 10.1.x.x. The other is a wired router and the computers on this router have an IP address of 192.168.x.x. Computers on both networks have Internet access but can't talk to computers on the other router.What I'm wondering is instead of using 3 hardware devices (1 hub/2 routers), is there any router model that will allow me to setup two internal networks similar to what I have above. I just want to cut down on the equipment and power that I use with my current setup.
View 1 Replies
View Related
Oct 28, 2011
I want to set up 2 separate network with one cable modem for my restaurant. we wants to provide WIFI access to its customers, but wants to keep their internal network separated.
View 2 Replies
View Related
Jul 29, 2011
D-Link, RangeBooster N, Dual Band Router.
I would like to set one network for surfing and another for gaming.
View 1 Replies
View Related
Feb 15, 2012
I am tryign to setup 2 networks for my company. I need 1 network for the first room and another network on the second room. Each room can't access another room's computer. I have setup 2 workgroups for each room but it seems that the workgroup can't setup passwords. Every computer is in the same subnet with static ip. They all connect to a switch -> router -> modem.
View 3 Replies
View Related
Feb 26, 2013
I have a Zyxell Modem/Router with 4 ethernet ports running 10/100, if i plug a gigabit switch in to this and then plug 3 PC's into the gigabit switch, (each PC has a gigabit NIC) will the router pull the network down to transfer all data at 100mbps or will the PC's continue to transfer at 1000mbps and only the connection from internet router will be at 100mbps.
View 4 Replies
View Related
Feb 16, 2013
I am currently working on a project that needs to install a router (or just a network device) that can offer 2 or more DHCP networks. We have been searching a network device for this but haven't gotten any good news yet. Any model or device that can fulfill this requirement?
View 6 Replies
View Related
Aug 3, 2011
How do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies
View Related
Jan 4, 2012
I want to setup two WIFI network with one Router at home.
View 2 Replies
View Related
Apr 2, 2012
Can we connect different networks using switch without a router
View 4 Replies
View Related
Sep 11, 2011
I have got a cisco 1841 router. I am able to create different vlan in the cisco router and I have got only 2 ports, fa0/0 and fa0/1. Now, I need to create different network in the same router at least four networks. FA0/0 is used for external networks. Now I want to create 4 vlan in this router. Namely, 10. 10. 10.1, 10.10.11.1, 10.10.12.1 and 10.10.13.1. The FA0/1 is connected to a 48 port normal switch. In the switch I am going to connect the cable of all the 10. 10. networks. Is this possible to access creating four vlan and routing all of them to the external networks with the fa0/1 port only. Is dot1q possible with only the router and a normal switch or is there any other possibility for this case.
View 5 Replies
View Related
Dec 22, 2011
My wireless router will no longer appear on the list of available networks, but it can find others. My partner's laptop will find it instantly! So it's obviously something on my computer.
OS: Vista Ultimate
Internet Provider: Sky
Country: UK
View 3 Replies
View Related
Nov 19, 2012
My neighbor and I were wondering if it is possible to combine our respective internet connections in order to gain a faster connection overall. What would be ideal would to have a wireless router in one of our houses, that is simultaneously connected to both of our ADSL routers, and to which both of us are able to connect. Do I need a specific type of router?
View 5 Replies
View Related
Mar 4, 2012
I live in a school residence with a roomate and we both have an internet connection in our rooms but it's two separate networks since we can't see eachothers pc on the network. Both our pcs are connected to a switch and those switches are connected to the two internet connections. I would like to know how to bridge those two networks using a router in the living room. I would also connect a printer and an xbox to the router so we can both access the printer, the xbox can access both pcs and we can access eachother's pc.
View 3 Replies
View Related
Mar 31, 2011
I need setting up two networks to use the same internet connection.Network A is on IP range 192.168.1.x and Network B is on 192.168.0.x and the firewall with internet connection is on Network A at 192.168.1.2.Network B must be on diffrent IP range that Network A can not access it, but the two networks are linked with a Linsys Cisco WAG120N router.Network A can access the internet fine as use gateway ip 192.168.1.2 but how do i get Network B to use that same gateway/internet connection?
View 3 Replies
View Related
