I am currently working on a project that needs to install a router (or just a network device) that can offer 2 or more DHCP networks. We have been searching a network device for this but haven't gotten any good news yet. Any model or device that can fulfill this requirement?
View 6 RepliesHow do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies View RelatedMy neighbor and I were wondering if it is possible to combine our respective internet connections in order to gain a faster connection overall. What would be ideal would to have a wireless router in one of our houses, that is simultaneously connected to both of our ADSL routers, and to which both of us are able to connect. Do I need a specific type of router?
View 5 Replies View RelatedMy question is if I can configure 3 ssid, for 3 different VLAN and add the DHCP address from a WAP4410N AP, when you upgrade to the latest version of IOS I can have this functionality?
View 2 Replies View RelatedIs it possible to have multiple dhcp pools for multiple VLANs? The switch is a 6509 and/or 4506 catalyst. I don't want to use server-based products.
View 5 Replies View RelatedI am having trouble setting up two networks.Basically, i want one 'private' network and one public network. The problem is, the private network can't access the internet.(Network 2)
Network 1(Public) works fine as i don't want them to access Network 2.Here's how it is setup.
Internet
|
Router/Modem (Network 1)
|
Server NIC1
Server NIC2
|
Switch - (Network 2)
Network 1 can access the internet and shared files on the server.
Network 2 can access Shared files on the server (which is what i want) but cannot access the internet.
Router/modem IP is 10.10.1.254 subnet 255.255.255.0
Server NIC 1 IP is 10.10.1.252 subnet 255.255.255.0
Server NIC 2 IP is 10.10.1.251 subnet 255.255.255.0
How can i get computers in Network 2 to access internet?
Explain the risks of not using multiple networks on a 300 host LAN
View 1 Replies View RelatedI have 3 Macs (OS 10.6.8) and one PC (Windows 7) at work. They are all connected to the company network for internet and access to shared network drives.The computers are used for media (mostly video) production and we need to move large files between the computers easily and quickly. The current network (company wide) is slow and unreliable, so I would like to create a separate network for these four computers and have them connected to both the company network and the office room network. Each computer already has two network ports and I have a router I can use.
View 3 Replies View RelatedWe have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies View RelatedI have a Windows 7 Pro Desktop with an on-board Ethernet and an Axis USB To Ethernet adapter. The on board Ethernet is configured as dhcp and obtain the address 10.162.146.123 with 255.255.255.0 subnet. The Axis USB to Ethernet adapter is static ip configuration with 10.38.25.37 and 255.0.0.0 as subnet. Under the adv settings I have also another ip 11.38.25.37 with 255.0.0.0 subnet. When the Axis is communicating 10.38.0.1 network I can not access the internet using the on board Ethernet 10.162.146.123. I have to disable either one of the cards to access one network at a time.
View 3 Replies View RelatedI currently have a hub-and-spoke VPN configuration with 6 ASA 5505's at remote sites all connected to an ASA 5510 at HQ via IPSEC lan-to-lan tunnels. My current configuration allows hosts on the remote site networks to talk to hosts on the HQ network, but not to hosts on the other remote sites.I have receieved a request to allow comminucation between the remote sites as well, with traffic all routed through the 5510 at HQ.
View 1 Replies View RelatedIm using 2 TP-Link TL-WA7510N to bridge a internet connection the connection is using a captive portal for my guests via pfsense. What i would like to do now is run a pc on the same connection without using the captive portal .So basicly i would need 1 secure network for my single pc and the one with captive portal for my guests.
View 1 Replies View RelatedAdding a second DAP-1522, They have 1 DAP-1522, they set that up useing the WAP(button on the side), This one is running in the frontroom of the house and the 2nd bridge will be running in the bedroom of the house.She has tried to click on the WAP button on both Dap-1522's and then the router to sync but thats not working, from what we can tell. I think I will need to manually config them now that a second one has been introduced.the frontroom Bridge is 192.168.0.50, but we cant find the ipaddreess for the second dap-1522 at this time. So question to all, if I can - Is there a way to identify all of the Dap-1522's on the network or anything that is connected on the network. as the DIR-655 is only showing 2 things connected?Right now I wish she would have listened too me and had her house wired for ethernet when the house was being built.
View 1 Replies View RelatedCan I run two networks, ie 192.168.1.xxx & 192.168.2.xxx, on the same switches. Certain PCs on the network will be set up for .
1 and others .
2. Each network would have its own router. I know I can't have DHCP on both routers,
I am looking to create an office network with each person having internet access but on a private network. however everyone will need to be able to access a communal printer. would they be able to see it if they were all on a different subnet or would i need to set up vlans?
View 4 Replies View RelatedI would like to associate multiple IPv4 networks with one physical interface in the router. All those multiple networks share the same broadcast domain(VLAN 5). I am aware that it's not possible to have multiple subinterfaces in the router with the same "encapsulation dot1Q 5". Am I correct that only option here is to configure all those networks as a secondary network to router physical interface? Or are there other possibilities than secondary addresses?
View 4 Replies View RelatedI have 3 networks coming on DMZ (VPN) interface. Only one network is able to ping the DMZ interface. See below networks coming i on the DMZ.
10.132.24.0/2410.132.25.0/2410.132.26.0/24 Only the 10.132.26.0/24 netork works as it is in the same range as the DMZ interface.
allowing the other two networks to communicate. I've attched the diagram and configs for your perusal.
I am setting up a customer site. One side is RV180W and the other side is Checkpoint 500W.
RV180W side
LAN - 192.168.100.0/24
Checkpoint side
LAN - 172.26.1.0/24
VOIP - 172.26.2.0/24
Need to setup an ipsec tunnel between the site. However, from the RV180W side, I can only ping the VOIP network, but not LAN. I have heard that RV180W only can talk to one remote network via ipsec, correct? workaround this other than changing out the RV180W?
we have 2 DHCP controlled networks at our work:
Network 1: Transparent EOC connection to Internet. Directly behind the EOC box is a router using a static (WAN) address provided from our ISP. Internally, the router uses DHCP (LAN) to manage a 192.168.1.x network. All computers on this network are using 192.168.1.x addresses via DHCP from that router - (rather, they should be). We use this for Internet access, office computers, a POS server and our POS systems. Mostly windows xp and some win 7 systems. Server is Windows 2008 server, but is not controlling DHCP nor a domain. It's just a Win 2008 computer on the network running as a "virtual box" on a VMware-based server.
Network 2: Comes in on a separate DSL line. This DSL modem is set up as a bridge. The router behind the bridge is using a static IP block (8 static IP addresses, 5 usable) from our ISP. Internally, this router uses DHCP (LAN) to manage a 175.69.10.x network (or some address similar to that). All machines on this network are using 175.69.10.x addresses via DHCP from the 2nd router. There is external VPN access to this network via one of the static IP addresses. This is routed correctly. This is Primarily a Linux network controlling several linux based machines. So, someone decided to "bridge" these two networks by simply plugging each network into the same central switch via Cat 5 cable.
The first problem we had (of course) was that the DHCP servers conflicted immediately, so we had to set half of this "mongrel" network to static IPs like 192.168.1.x, and the other computers are getting their addresses via DHCP from the 176.68.1.x network router. The second router keeps "resetting" the network, causing IP address problems on the first network, screwing up our POS system in the process. But we still need to access the linux machines on network 2 (via http) from the machines on network 1.The goal is to be able to be sitting at machine 192.168.1.x on one network, open a web browser, type in a 175.69.10.x address on the other network and have the linux web-based application come up from the machine on the second network. (We may need more services bridged besides just http.)Putting both networks on the EOC connection controlled by a single router is NOT an option.
I'm going to move offices into a shared situation with 3 companies. Each company will want its own private network so there's no snooping between companies. I am planning on using VOIP for the phone system (Nextiva cloud based). Is it possible to set up the system so that each company has access to the VOIP system but yet remains sequestered in the their own network for everything else. I was hoping to do this with one data port at each workstation using Cisco SPA-303 phones. The way I understand this, is that the phone plugs in to the data port and you daisy chain the workstation off from each phone. Is this possible to do this while having the system I described? Another wrinkle is that I'd also like all the networks to be access shared printers.
View 7 Replies View RelatedI am using an ASA 5520 running 8.2(4). My objective is to get a VPN client to access more than one network on the inside of the network, i.e., I need to VPN in with an IPSec client and be able to establish tcp connections to servers at 192.168.210.x and 10.21.9.x and 10.21.3.x, I believe I am close to having this resolved, but seem to have a routing issue.
View 5 Replies View RelatedI currently have an 867vae router and a 1131ag ap setup with 2 vlans and 2 ssid's. I am in the process of baby proofing the house and would like to use the cisco plsk400 homeplug system to relocate my wap. I use 2 networks to seperate and filter the kids internet traffic from my own. It also allows me to shut the kids vlan when they shouldnt be on the internet.
As far as i can tell the plsk400 homeplug doesnt support 802.1q.... so is there any way i can keep the seperate networks/SSID's and the abilty to filter and turn off one of them at will without a trunked link to the router?
We have 2 DHCP controlled networks at our work:
Network 1: EOC connection. We use this for Internet access, office computers, a POS server and our POS systems. Mostly windows xp and some win 7 systems. Server is Windows 2008 server, but is not controlling DHCP nor a domain. It's just a computer on the network. Directly behind the EOC box is a router using DHCP to manage a 192.168.1.x network. All computers on this network are using 192.168.1.x addresses via DHCP.
Network 2: Comes in on a separate DSL line. Primarily a Linux network controlling several linux based machines. This network has it's own router behind the DSL modem managing DHCP using 175.69.1.x (or something close to that) addresses.
Someone decided to "bridge" these networks by simply plugging each network into the same switch via Cat 5 cable. Bad idea.
The first problem we had (of course) was that the DHCP servers conflicted immediately, so we had to set half of this "mongrel" network to static IPs like 192.168.1.x, and the other computers are getting their addresses via DHCP from the 176.68.1.x network router.
This works - badly. The second router keeps "resetting" the server address on network 1, screwing up our POS systems. But we still need to access the linux machines on network 2 (via http) from the office machines on network 1.
I am thinking the solution to this issue is to place a 3rd router as a bridge between the two networks. Is this correct?
The goal is to be able to be sitting at machine 192.168.1.x on one network, open a web browser, type in a 176.67.1.x address and have the linux web-based application come up from the other network.
setting up networks with multiple locations and multiple wireless points.For example: My sisters' home has here modem in her main computer room, it has a Belkin router hooked to the modem. Then a line goes from there to my nephew's room where I tried to expand their network by adding another router. I really just wanted an access point, but they don't seem to sell these as much as they used to. Anyway, I had it working, but it was two different networks, NETWORK1 and NETWORK2. So they had to swap networks when moving around the house. what would be the best hardware setup to provide both sides of the house with some Hardwired access as well as wifi access? Right now, we have two routers, a DIR615 (or something like that) and a Cisco E1000, and again hardwire going from the main computer room to my nephew's room.Also, in my house, I have lots of stuff... I have an Actiontec Router from FIOS, feeding a small hub as well as a switch in my main room. Which then feeds a Ps3, Wii, laptop, Denon reciever, and Access Point... and also feeds my Apple TimeCapsule, which also feeds my printer. My wireless devices range from cameras, iphones/ipads, and a wifi unit (I forget what it's called, but it connects my DVR wirelessly to my network, and the DVR itself doesn't have wifi).
my question about my setup is, should everything be on one network... as in let the ActionTec handle most of the duties and use switchers and accesspoints to extend the network. Should everything be on the same wireless network and channels? Like if I used my access point to extend, do I want the same settings as my main wireless router, and would that be the same for the Apple Airport Extreme?Also, does having all these wireless networks going create any kind of hinderance on my performance. For example, the PS3 has some sort of wifi in it... it produces a SSID, but I never connect to it. Should I make sure that's off? And in my main room, should I go with just the AirPort extreme over using it and the Wireless Access point.
How to configure DHCP server if i have 2 vlans. I know how to configure rest of the network, just i don't know server.I use packet tracer and i attached file with my network. PC1 is on VLAN1 and PC2 is on VLAN2.I want ip addresses in vlan1 to be from 192.168.1.2 and in vlan2 from 192.168.2.2. I would like to do it just like in the designed network, without router.
View 5 Replies View RelatedI want to configure multiple DHCP pool on ASA. that I create like
int e0/2
no shut
interface Ethernet0/2.10vlan 10nameif inside10security-level 100ip address 192.168.10.1 255.255.255.0
interface Ethernet0/2.20vlan 20 nameif inside20 security-level 100ip address 192.168.20.1 255.255.255.0
dhcpd address 192.168.10.10-192.168.10.254 inside10dhcpd dns x.x.x.x y.y.y.y interface inside10dhcpd enable inside10
dhcpd address 192.168.20.10-192.168.20.254 inside20dhcpd dns h.h.h.h z.z.z.z interface inside20dhcpd enable inside20
I have following query...
1. int e0/2 work as trunk port, is it? any special confiduration require other than dot1Q?
2. How can I configure inside interface? is it like,
access-group inside_access_in_1 in interface inside10
access-group inside_access_in_1 in interface inside10
3. How can I configure static NAT ?
4. How can i configured inside route?
5. How can I configured default NATing?
6. On which interface I access ASA? currently using inside interface.
I am trying to come up with a wireless solution for a campus deployment. The campus has ten buildings currently using Autonomous APs and are currently converting to Dual 5508 Controller model.
I would like to have a separate AP Mgmt subnet in each building, so I will configure an ip helper on the SVI on this vlan to:
Option1 - Point to the Internet Router configured with DHCP Option 43 with the controller IP addresses
Option 2 - Point to the Wireless LAN Controller itself.
Problem with Option 1 is that the Internet Router will now have to connect directly to the COE network to be able to route back to the AP mgmt subnets. So I would emply a VRF here to keep the separation.
Problem with option 2 is that there appears to only be one DHCP scope allowed on the controller. So this would mean a flat mgmt network across all buildings which I am trying to avoid. I know that after the AP joins the controller, I could change the IP and change the vlan on the port but this is not very neat.
So question is:
Is there a way of getting multiple DHCP pools on the controller?
i have the following scenario that i'm requesting you guys verify if it will work.I have a 3550 catalyst switch running EMI and an auotomous 1131AG aironet ap, i have two dhcp pools already setup on the switch one for the LAN and the other for the wireless clients.There are two vlans on both the switch and ap for LAN and wireless clients.I have already setup multiple SSID's to be broadcasted from the AP, is there a way i can bind one SSID to the lan dhcp pool and the other to the wireless clients dhcp pool?
View 1 Replies View RelatedDHCP is assigning multiple leases per machine. The server itself grabs about 10 IPs with Unique ID "RAS"
View 1 Replies View RelatedI want to configure multiple DHCP configuration on ASA 5505. I tried to create sub interface for different IP Pool but it was not configure on ASA 5505. is it possible to create subinterface on ASA 5505?
ASA 5505 IOS version: 8.3(1)
License: Security Plus
We assign in our IPSec VPN the tunnel-address from our centralized dhcp server pools.In the profile we have two server's ip configured.In test (whireshark) we noticed that the discover always go to the first configured ip.
I do not understand and could not finf hints how the function is.
- backup server with a timeout when no answer comes from primary ?
- should ASA do simultaneous discover to all configured ip's ?
=>Problem is, that although the first server not answered in a timely manner, we noticed no discover to the second.
Here the partial CLI - Config:
++
tunnel-group AZInt07 type remote-access
tunnel-group AZInt07 general-attributes
authentication-server-group ActivPack
default-group-policy AZInt
dhcp-server 10.x.x.y
dhcp-server 10.x.y.y
[code].....
All the SOHO routers I have used had a table which shows IP, MAC, Name, etc. In this table, I could easily put a check mark to a check box in a row that I would like to bind/reserve and IP would be reserved for that specific MAC.
In ISA570W, when I need to reserve/bind an IP to a MAC it asks me to fill out a table in which I have to manually type in the name, IP, and MAC.
Is there an easier way?Is there a way to do the reservation for multiple clients at once?If this is the only way, do I need to copy the mac address of each client somewhere and then reserve IPs for each one manually? This method looks very far from user friendly and efficient, unless there is a very logical reason that I cannot think of.
I can not get dhcp to work.I can ping from the switch to both vlans...
here is my config for the router.....
Router is a 1760
Current configuration : 1379 bytes
!
version 12.4
service timestamps debug datetime msec
[Code]....