My LAN has 2 Vista, the new 764 and an XP machines. Last night, I created IRPStackSize and set it to 16 and it fixed the access problems all the other machines had w XP. This AM, teh 764 does not see the XP again, but teh 2 Vistas can still read & write to XP. Increased IRPStackSize to 32, but that has no effect.
The 764 "sees" V2 [one of the Vista machines, the newer, 2nd one] but cannot access any of the shared folders on it. It gets Error 0x80070035: network path not found. This AM, I disabled several AV & spyware programs on V2 and ran uSoft's FIXIT pgm and something "fixed" it. Rebooted V2 and the problem/failure is back. V2 can still read/write 764.
On all machines, C: is shared w all permissions to 'everyone'.
Looks like 2 problems to me. They seem like 764 problems since other computers on teh network do not have these problems and both things the 764 can't see or access have no problem accessing 764 files.
I have a bt home hub. When I look at wifi networks I only see the hub. I want to take my laptop out so how an I check it will see other networks when away?
Have a Vizio tv that can see the wireless - NetGear router. The internet service is through HughesNet. Laptop, iPhone, and iPad have no issues connecting to wireless.
We have an 871 vpn router conntected back to our main facility ASA5500. The VPN tunnel seems to come and go for no reason we can find.
The weird thing of all this is that we can only ping some subnets and not everything even though we alow all networks to be routed.
This is one of those things we keep looking at but for some reason just can't find the problem. Hoping another set of eyes spots something obvious.....
Config below
Current configuration : 9347 bytes!version 12.4no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime localtimeservice timestamps log datetime localtimeservice password-encryption!hostname Lincoln-Office!boot-start-markerboot-end-marker!logging message-counter sysloglogging buffered 64000enable secret 5 xxxxxxxxxxxxxxx!aaa new-model!!aaa group server radius ACS server 10.2.2.201 auth-port 1645 acct-port 1646 (code)
Ok BEFSR81 (192.168.1.1) is connected to the Modem. I have a cable from one of the BEFSR81's LAN ports going to WRT54G (192.168.2.1) WAN port. My computer is connected to the BEFSR81. I can not access the setup page (http;//192.168.2.1) from my computer, maybe I am not suppossed to be able to do that. The Laptop sees a Linksys wireless connection, but there is a yellow exclamation point over it.
Have Win 7 on a desktop and laptop. Tried several ways through network wizard(novice on PCs) to setup network and no internet connection with either unit. The router sees the internet and the laptop picksup the network I setup but can not connect on either PC. I know I don't have a setting write and I do not know where to start again or what specifically to look for. We just want Internet on both PCs.
I have a wireless network in my home. I reliably get solid connections on our various devices such as the Wii (netflix streaming), a net book, a laptop and Wi-Fi connections on android phones. When I first set up the 930L I thought it was defective because I couldn't get a connection. Until I did it in the same room as the router okay, that worked. But I move 2 rooms over and I no longer connect.
Seriously, I can go a few rooms away and easily stream an HD movie via netflix to my net book. But if I set up the 930L at the exact same location it will not connect. If I move the camera within about 20 feet of the router with only maybe 1 wall between them, it will connect.
At this level of wireless power it is nearly worthless for me. Is my camera defective or are all of them this lower powered?I am running a dlink router, 300N, WPA security. Like I said, I can connect if I'm literally 10 feet away. But any significant distance or anything more than a single wall in between and the router no longer sees the camera. And all other wireless devices have strong, reliable connections all through my house.
I've been running WHSV1 for at least 3 years now without any problems. Upgraded my client to Windows 7 and stream movies etc.. no issues at all. I gave "guest" account enabled with full access on the WHS server machine and just mapped theshares on my laptop..Anyway, I did some updates on my windows7 laptop and now the computer can no longer see the "server" machine."Server" appears in "other devices" in windows explorer but I can't do anything with it. Just takes me to a page server.com by godaddy.Also, I can no longer use RDP from within my own network! Says the SERVER machine does not exist.I can log in to the server just fine using logmein.
Also, made sure the windows machine has the network that it joined set to "home." I've had a similar problem years ago when I used to use zone alarm but I don't know how to fix it now. It's as if a firewall is blocking it or something.
I'm desperately trying to set up my old D-Link DI-524 on my parent's Toshiba laptop...I'm visiting and going thru withdrawals! I've installed it, run the wizard etc but it doesn't work...not even wired. I've tried various cable configurations and I get nothing. Both cables are good and work just fine connected to the modem. I've reset it a few times, upgraded the firmware and still nothing...I'd think I'd at least get it to work hard wired. My laptop can see the network I set up even...but no data transmission. I'm not a wireless expert, but I need to become one fast!
My wireless adapter sees all the networks within range but I am not able to see them listed under windows network connection and there cannot connect even to my own network.
I mistakenly downloaded and installed version 4 firmware when i should have installed version 2. My system (windows ver. 7) no longer sees the wireless router (WRT54G). I no longer have the install CD and the version 2 firmware does not seem to be available on the website. Is my router now dead in the water?
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).
I had an Iomega 1TB External Hard Drive connected to my E4200 router. I had shares confgured and they were properly running on the network.
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
I rebooted the router and it still does not work. I've connected the hard drive directly to my PC to verify that it works there, and it does. The router is running Ver.1.0.03 (Build 14) of firmware (the latest).
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
Just installed Vista and cannot seem to get the wireless card up. It keeps saying local only and when I diagnose and repair it says Cannot communicate with primary DNS server(192.168.2.1) When I run Ipconfig /all this is what I get:
Code: Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:UsersNichelle>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : SCUP-PC
I have just upgraded a laptop to vista, I didn't have any internet connection until I used a dongle to connect, after connection, it downloaded drivers to computer. Wireless now works without the dongle. I have no wired connection as it says "Media Disconnected." If I look in device manager, everything is working fine. I have looked on the net & tried a lot of checking various things but still no connection on lan. This is on an old laptop a advent 7109A. It was working fine on all connections until I upgraded.
For a few weeks some websites (which are definitely not down) will not load for me....including, for example, talktalkmembers.com, which is useful.Safe mode makes no difference, it's on both IE & firefox, most websites and other net using stuff works fine, it's just some websites time out. Ping requests to those websites time out, turning off proxy settings hasn't worked, various FF tweaks haven't, changed to google free DNS, fiddled with router MTU, cleared cookies etc.
I have a vista laptop connected to internet and a desktop running window XP. I want to make the laptop share its internet connection to the XP desktop but I haven't succeeded. The desktop has 3 Ethernet ports with one showing 3 computer connected together(same on the laptop except has 2 ports). I've tried connecting on all the ports but nothing happened. I googled a lot but the results I found always involved the XP having Internet but not the laptop. The computers cannnot even ping each other.
I did this before but both computer ran Windows XP, so I think it has to do with Vista.
Two computers on the home network:Dell desktop running Vista (computer name PJ) is wired to a Belkin routerThinkPad laptop running Win7 (computer name ThinkPad) connected wirelessly to routerThe desktop (PJ) can see the laptop (ThinkPad) and access it's shares.On the laptop the desktop name (PJ) shows up under NETWORK but clicking on the computer name shows: "Windows cannot access \PJ"I have turned off Windows Firewall and AVG anti-virus on PJ but CANNOT ping PJ from ThinkPad[CODE]
the problem is that for no apparent reason at no apparent interval the net on my laptop will go to just a local only connection. when i tell vista to repair it, it says either dns problem or connectivity issue, the way i get past it is to disable the wireless connection then re-enable it. i think my laptop is the only machine effected.
I've been going mad plugging in wireless dongles, plugging/unplugging ethernet cords into different nics on my vista computer trying to connect my xbox 360 to the internet through it and now my main nic isn't assigned an ip address from my router... I failed at the xbox 360 ics/bridge but do remember an error message about ip conflicts
My first PC (XP) is attached to a wireless router via an Ethernet cable and my second PC (Vista) is connected to the same router via wireless. I have shared the files on both PC'S and can access the files of the Vista PC from the XP PC but when i try to access the files of the XP PC from the Vista PC i get the following error :
"\Studyoot (C) is not accessible. you might not have permission"
No Network provider accepted the given Network Path.
I just got a new computer at work and it has Windows 8 on it. My old computer ran on XP and was connected to two different computers with access to the My Documents folder on each computer. That is all I need access to. I have tried everything to get my new computer set up so that I can have access to those two folders as they are extremely important for my job. I mapped the network drives from both computers to my new one and they access to my computer. When I worked from the Windows 8 computer and tried to access those computers I received an error message saying that access was denied and to contact my network administrator. I have access to other folders on the XP and Vista computer except the folder that I need to get into. I have brought in two different people who do freelance work and neither one was able to figure this problem out. For four days that I have been unable to properly do my job and I have just been emailing files and documents to myself. The XP and Vista computer do not need networked together either.
I have a family member that is having trouble sharing their printer through the network. He has three computers on the network, two Vista laptops and a XP desktop. The printer is connected to the desktop and works fine on the desktop. The desktop is connected to the modem through a router. The problem is with the Vista laptop. He can not see the printer or even access the desktop at all. Both are part of the same work group. I have file and printer sharing allowed through the firewall. I have tried running the network setup wizard and that did not work. I installed the driver for the printer manually on the laptop and did not work. Everything that I know of related to sharing is turned on.What I find strange is Vista can not access XP but XP can access Vista.
