Routers / Switches :: How To Set-up D-LINK DI-524 For Vista

Apr 2, 2011

setting up my D-Link wireless router to my computer which is Windows Vista. have a step-by-step walkthrough with regards on how to set this up.

View 1 Replies


ADVERTISEMENT

Routers / Switches :: D-Link And Linksys Routers Plus Modem Connection

May 26, 2011

everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.

View 1 Replies View Related

Vista Switches To Network

Jun 2, 2011

the problem is that for no apparent reason at no apparent interval the net on my laptop will go to just a local only connection. when i tell vista to repair it, it says either dns problem or connectivity issue, the way i get past it is to disable the wireless connection then re-enable it. i think my laptop is the only machine effected.

View 15 Replies View Related

Routers / Switches :: How To Open The Tp-link Interface Setup

Aug 16, 2012

how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??

View 1 Replies View Related

Routers / Switches :: D-link Router Is Blocking Website?

Feb 27, 2011

l have a web-site and when l go on it it comes up with blank page internet explorer cant load this page.l have phone talk talk and they cant fix it.l have a d-link router,its only my own web-site l cant access all other web-sites l can access.

View 2 Replies View Related

Routers / Switches :: Assigning Static IP To D-Link Router?

Mar 6, 2011

i m using ISP provided modem+router and another D-Link Wireless router at the same time... My computer is connected to D-LInk's Router and D-Link's Router is connected to ISP's Modem...My modem's Ip address is : 192.168.1.1 Router's IP Address: 192.168.0.1ok but now problem is that now Dlink is connected to ISP's Modem and ISP's modem assigns different ip to Wl.Router. Both have DHCP enabled... But i want modem (which is also a router) to assign D-Link's router the STATIC IP... like 192.168.1.54Router Model is D-link DIR-615 Modem Model is ZTE EchoLife HG510a

View 1 Replies View Related

Routers / Switches :: Buffalo Link Station 3t Not Responding Due To Firewall

Feb 12, 2013

My buffalo link station 3t was giving me problems due to avg firewall blocking access to my drive. so switched it off to work . now that the drive is working but now when i click to access the drive the back ground on the desktop goes black on windows 7 its a acer laptop and the graphics are blurey.

View 1 Replies View Related

Routers / Switches :: Upgrade D-link Router To Get Faster Internet Access?

Jan 3, 2012

I have a DI-604 D-link router, is it necessay to upgrade to newer router to get faster access to internet? Upgrade Firmware? I have a PD950 processor with Win XP pro and use it for DAYTRADING streaming data and fast executions.

View 5 Replies View Related

D-Link DIR-601 :: Cannot Connect To Internet With Vista

Apr 9, 2011

This is strange.  I have a client who owns the DIR-601 router.  It connects to a COX cable modem. 

The wireless side works fine.  I can access the internet using wireless connection with no problem. I can connect my Linux laptop both wired and wireless no problem.

However, and this is the puzzle, I cannot connect his Vista computer to the internet.  It worked for a while then just stopped.  From the Network and Sharing screen we can see a good connection to the router, but a big red X from the router to the internet.

I can ping the router with no problems, but I can't ping anything on the net either using a name (www....) or an ip address.

We changed from dhcp to static ip but that didn't work either.  Changed the DNS to the ip address of the COX DNS just in case that was the problem.  Still the same.

I have had COX over to check everything out and everything is fine on their side.

I have Googled all over the place and not found anything that's useful.  I did find one post about a 625 that said to change the WAN speed from auto to 10 or 100, but from what I see the 601 doesn't have this capability.

View 2 Replies View Related

D-Link DIR-615 - Can't Connect To Wireless Network On Vista

Jun 30, 2011

I recently bought a windows laptop running vista to do windows testing on for web development (I use macs normally).I was shocked to find that I can't simply push connect, enter a key and then be connected to our home wireless network... no of course not because it's windows and nothing is easy or practical.Anyhow, before I go on an anti windows rant, I actually need this working.So at home we have a wireless network secured by a 32bit WEP key.On our macs I simply push connect, enter this key and we're away.With my new vista machine I go to Network & Sharing Center -> Connect to a network and click our network.I'm then immediately met with a screen that says "Press the configuration button on your access point". I have no idea what this means.Down the bottom of the screen there is an option that says "I can't find the configuration button... I want to enter the network key or passphrase instead" Which I click.The next screen I click "Enter/Select additional log on information" but this brings up a user name/ password/ login domain screen... I just want to enter my 32 bit key and be connected. I'm using a D-Link DIR-615 wireless router.Also, when I run "ipconfig" in the command prompt I get."Media State....: Media disconnected"

View 1 Replies View Related

Belkin Routers :: N600 Connect To Internet With Vista PC

Dec 21, 2012

Just installed N600 router. Works for my Windows 7 PC and my Android phone. Does not work with my Windows VISTA PC. It connects to the Router ok, but does not connect with the Internet. Also says UNIDENTIFIED NETWORK. What am I missing?

View 1 Replies View Related

D-Link DIR-615 :: Setup Using Vista Basic Sp1 And Dial Up Modem?

Jul 31, 2012

My daughter is on an Army Base in the South Pacific. They have Dial up internet on their home telephone not DSL. They have high speed wireless at the base community center/coffee shop. I will be going there in 9 days to install the dir-615. She has a Dell Desktop with Vista Basic SP1, laptop with XP, IPAD2 and a NOOK Tablet. The dir-615 HVE1 with firmware 5.00na on the bottom sticker. She said she was able to go to web address, login, change the user name and password, started on the wireless configuration and she paniced. My question is basically this. by using a cat5 cable from the desktop to the dir-615 with dialup internet connected can the router be setup using the automatic method as opposed to manual. Our first priority is to be able transfer files to the 2 tablets without being connected to the internet like a switch and secondly If possible go on to the internet from a Tablet or the Laptop. I assume the second option would reuire internet sharing option when setting up the network and performance would be ugly.

Can get I get this router to work this way with just dialup to set it up

View 5 Replies View Related

Cisco Routers :: RV042 - Setup Of VPN Using QVPN To Access Vista?

Jul 12, 2009

I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.

View 6 Replies View Related

Cisco Routers :: Vista And Windows 7 Dropping Connections Via RVS4000?

Jul 24, 2012

We have a newly-purchased RVS4000 v2 with firmware v2.0.2.7. Its intended role is as a gateway between our local network of wired workstations and a Cisco 2800 series Integrated Services Router, which is at the receiving end of our T1 line. It is configured with static IPs on both the LAN and the WAN side. It does NOT serve DHCP for the LAN. Ever since I installed it, I have had repeated complaints from users of Vista and Win7 workstations that they lose internet connectivity about every 20 - 30 minutes or so. The only solution is to unplug the workstation's CAT5 cable, count to 30, and plug it back in. Then everything's hunky dory for another 20 - 30 minutes. Meanwhile, all our Windows XP and Linux workstations enjoy uninterrupted internet access. The router/gateway we replaced (a DLink DIR-130) never had this problem.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N And Vista Local Only Access?

May 14, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Virgin Media

I have recently purchased and installed a TL-WR841N wireless router to replace an older system. After following all of the quick install guide and the like I got it set up and working correctly both wired and wireless. However one laptop in the household, an Acer Aspire 5315 running Windows Vista 32bit, does not connect. Using an ethernet cable works fine but the wireless signal is seen and appears to connect but does not find the internet and states Local Only Access.When connected wirelessly I also cannot ping the device but when connected with a cable I can and get a good return.The firmware is up to date on the router and the latop is full up to date with drivers and windows updates.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Vista Can't Find Router

Nov 19, 2012

Region : Sweden
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :

Have just bought this new router and it works faultlessly on all laptops and mobile phones in the house except for a laptop running Vista, the TCP IP properties look all right, it asks for a username and password ( only if connected by an ethernet cable, otherwise it cant access a network) but they are not accepted, the same username password was accepted for al the other computers

View 3 Replies View Related

Belkin Routers :: N600 - Vista Not Allowing Internet Access - Local Only?

Apr 14, 2013

Installed new N600 router and every box in the house can access the internet - except for my Vista powered laptop. My network shows up as Unidentified network with 'locla only' access. Ben scouring message boards all day. Can't find a solution at Microsoft.

View 3 Replies View Related

Cisco Routers :: RVL 200 Unable To Install Virtual Passage Under Vista Business?

Nov 2, 2009

We use RVL 200 to establish VPN connections. Now we have the problem that no VPN connection is established.
 
The same problem with Windows 7, but also with Vista Buiness, using administrator account, IE8, trusted sites, ActiveX enabled ...Message: Virtual Passage Setup:Error: Virtual Passage not installed. Please install as administrator.

View 21 Replies View Related

Cisco Routers :: Stuck At Verifying Network QuickVPN Client RV 120W - Windows Vista

Sep 15, 2011

I recently installed a new RV120W router at one of my customer's office. I have 2 users connecting using the Quick VPN software.The first one is running on a Windows XP Pro SP3. Everything works great on this PC.The second PC is running on a Windows Vista - The QUICKVPN client stays at Veryfing Network and Eventually I get an error " The remote gateway is not responding. Do you want to wait?I have disabled Firewall on both PCS for troubleshooting purposes.

View 1 Replies View Related

Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?

Jan 29, 2011

I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.

View 3 Replies View Related

Routers / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?

Apr 23, 2011

how to connect two subnets with two switches and one router using router sim software?

View 1 Replies View Related

Routers / Switches :: Daisy Chain 3 Switches And Not Have Ip Conflict?

Jan 31, 2011

Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.

View 3 Replies View Related

Dell :: Intel Wireless Link 5300 Agn Giving Install Code 10 Error On XPS M1530 Vista Home Premium

Apr 5, 2012

I have tried Intel tools and latest drivers ( w/  and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.

View 20 Replies View Related

Routers / Switches :: How To Check Broadcast On Switches

Apr 26, 2011

how to check and trouble shot broadcast issues on network

View 1 Replies View Related

Routers / Switches :: Smurf Attacks On Belkin Wireless Routers Reply?

Jan 2, 2013

If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.

View 6 Replies View Related

Routers / Switches :: Transfer WAN From Radio Receiver Through Chain Of Routers

May 24, 2012

For my work I am looking to create wireless capabilities to remote locations. To do this we are using a standard modem/router that is connected to an Engenius (802.11b/g) wireless outdoor radio connected to a dish antenna. We are able to go to locations (3+km) and then with a corresponding receiving antenna (using LoS), receive the Internet and connect both to computers at the transmitting point as well as to the WWW. The problem exists is that we want to employ a series of routers at the receiving end that would be able to carry the transmission to a different location (relatively close), due to the fact that some of the locations do not have line of sight to the antennas. We are using Encore routers, model # ENHWI-N3. When we connect the radio's Ethernet into the routers WAN reciever, we can connect to the Internet with a computer. The problem exists is we want to pass that connection over to a second router (R2). This connection is done when the routers are on access points set to a WDS function with R1 having R2's mac address and vice versa. Both routers are set to channel 1. Even when the routers are seperated by distances >50m a computer plugged into R2 can see a computer plugged into R1. Files can be transferred between the 2 computers wirelessly at speed around 3 mbps. However computer 2 on R2 can not connect to the WWW. This router features a spot that lights up if it has Internet access and R1's is lit up but R2's is not. How do we transfer the Internet and not just a LAN from R1 to R2 so it can be accessed further away from the point of the radio and antenna equipment. This setup has also been used where R2 is hardwired to R3. At R3 we change the channel to 11, and then connect through that with mac addresses wirelessly to 4th router. If comp is in R4 and far away it can still access and file share from comp at R1.*edit the ip address for the routers exist all on 192.168.1.xxx If the 3rd number is different between routers would this make a difference?

View 1 Replies View Related

Routers / Switches :: How To Install Two Wireless Routers In Series

Dec 31, 2012

The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.

View 3 Replies View Related

Routers / Switches :: Change Two Old DLink Routers To Repeaters

Nov 28, 2011

What are procedures to deactivate di-604+di-704 routers+make the repeaters,connecting each of them,in a wired fashion,to my Belkin wireless N router?

View 1 Replies View Related

Routers / Switches :: Install 3 Routers In One Location With Same Password?

Mar 10, 2012

how to installs 3 router with same password

View 2 Replies View Related

Routers / Switches :: Networking With Switch / Bridge And Routers?

Jun 13, 2011

modem
........ |
........ |
----switch-----
|................ |
|................ |
Router 1.... Router 2
|..................... |
|..................... |
Computer 1.....Computer 2

......................Computer 3 Router 1 points to a VPNRouter 2 access to the internetComputer 3 needs to access router 1 (VPN). Both Computer 2 and 3 are in a different room than computer 1, and router 1. Computer 2 is networked via cat5e to router 2.Is is possible to have Computer 2 and 3 share the cat5e, yet access different routers?

View 5 Replies View Related

Routers / Switches :: Possible To Connect 2 Routers To One Phone Line

Apr 30, 2011

Can I connect 2 routers to one phone line so that I can receive a wireless internet connection throughout my house?

View 1 Replies View Related

Routers / Switches :: 2 Routers On Same Subnet With DD-WRT VPN Tunnel On Second?

Mar 13, 2012

How to set up a home network with 2 routers, where R1 acts as the DHCP server and R2 is basically a switch, connected LAN to LAN and everything is on the same subnet. Currently I have a different setup:Both routers have the DHCP server enabled and I connect R2's WAN port to R1 LAN. Therefore I have 2 subnets. Now my special requirement is that R2 is a DD-WRT router, which establishes a VPN connection to StrongVPN, so that all internet traffic via R2 is encrypted and goes through the StrongVPN server. Now my question:If I change my router setup to the same subnet, meaning R2 connects LAN to R1 LAN and I disable DHCP server on R2, will R2 still be able to establish the VPN connection?

View 5 Replies View Related

Routers / Switches :: How To Bridge Two Routers Over The Internet

Apr 26, 2012

i want to ask if i can link two routers while they are totally separated of each other over the internet to make a large LAN the two routers are TP link?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved