Cisco AAA/Identity/Nac :: Monitoring And Reporting On ACS 5.1 Not Working?
Jan 31, 2011
I have not managed to get the Monitoring to work on the ACS 5.1. This is an eval version. Advanced monitoring and reporting is installed on the ACS. This is my configuration on the Cisco Router
aaa accounting exec default start-stop group tacacs+aaa accounting commands 0 default start-stop group tacacs+aaa accounting commands 1 default start-stop group tacacs+aaa accounting commands 15 default start-stop group tacacs+aaa accounting connection default start-stop group tacacs+
logging origin-id iplogging facility sysloglogging source-interface GigabitEthernet1/1logging host 1.1.1.1 transport udp port 20514
logging monitor informational
epm logging
On the ACS, when I open the dashboard --> ACS health -> I get Status not available.Global Instance under Logging Categories been configured for local logging?
View 4 Replies
ADVERTISEMENT
Mar 26, 2012
I am configuring new ACS 1121 appliance with version 5.3 and wanted to know how to configure Remote Database settings in ACS5.3 Is that necessary to configure that option ?
Also one more thing I can see that ACS 5.3 generates lots of logs is there any solution to reduce such logs. It seems many unuseful logs which are system related are getting logged into device which might no be good for memory requirements of device.
View 6 Replies
View Related
Jan 10, 2013
1) How do you manage your inventory of network equipment from the time you receive a product into inventory to the time you decommission it?
2) How do you make aware the people who manage your network monitoring/reporting software that a device has been added/removed from the field?
2a) How do you notify the people who manage your network monitoring/reporting software of what is to be monitored on a new device in the field? Of a new interface that has been added/removed on an existing device?
2b) How quickly do you notify for 2/2a? i.e. minutes, hours, days, etc.
3) What types of interfaces and resources do you monitor on a network device?
View 3 Replies
View Related
May 16, 2011
I'd like to know if there is a way to exclude passed authentications for a specific username from reporting in the Authentications-TACACS and Authentications-RADIUS reports?
We have a few usernames that are used in scheduled jobs. We only need to know when they fail authentication, so we don't need to fill up the reports with every passed authentication from these accounts. Can this be done?
View 1 Replies
View Related
Apr 3, 2012
We're currently running on ACS 5.2.0.26.9 with 2 appliances (one primary and one secondary).Today, I wanted to get some reports from the Monitoring and Reports tool. At beginning, it seemed impossible to generate them. Later, I decided to reload first primary and then secondary. As soon as I've done it, I got an email alert telling me that it failed parsing NAD.
Cisco Secure ACS - Alarm Notification
Severity: Critical
Alarm Name
System Alarm [Collector]
Cause/Trigger
[code]....
I don't really find where I can find the Collector log...Anyway now when I generate a 30 days report, I only get data up to 23.03.2012. Nothing recent !
View 7 Replies
View Related
Jun 16, 2010
Just installed ACS 5.0.0.21. Monitoring and reports database was working, but now is not. When trying to open, I get "Monitoring and reports database currently unavailable. Trying reconnect in 5 minutes." From CLI "sho application status acs" gives me the following:
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'adclient' runningProcess 'view-database' runningProcess 'view-collector' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' running
Also, logs show nothing unusual.
View 6 Replies
View Related
Mar 26, 2012
I am trying to add ACS 1121 (ver 5.3) to monitoring and seems that MIB are missing. Need MIB for this device which I can use in monitoring tool.
View 1 Replies
View Related
Aug 13, 2012
I have 5 installations of ACS appliances (ACS 1121 running ACS 5.3). Is there a way to monitor them via SNMP? The AD client keeps dying on one of them, and even with the newest patch it's not up. Also, i want to monitor them up/down, CPU, memory... basic network monitoring to make sure my devices are healthy.
Any one know if that can be configured? I figured i'd ask here before opening a TAC.
View 2 Replies
View Related
Dec 2, 2010
i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.Everything works fine except for the "Monitoring & Report Viewer"-Tab:When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
View 4 Replies
View Related
Jul 17, 2012
I have a Cisco ACS 5.1 virtual appliance which has been working fine, I have however just discovered that it is now unable to provide me with any logs. TACACS authentication is still working without any issues, the only problem I have is viewing the logs.
View 6 Replies
View Related
Apr 20, 2011
It seems that motion monitoring setup for 930L is not working correctly.I've setup the camera to ONLY monitor the half of the screen, but it is still monitoring the other half of the screen as well.I've setup the camera to FTP the messages when motion is detected, and it is uploading the images when the other half contains the motion.
View 6 Replies
View Related
Oct 28, 2012
I'm trying to test such 802.1x wired environment:windows xp sp3 as supplicant windows NPS as radius server 2960 as authenticator latest anyconnect (3.1.01065) + nam and standalone profile editor.I have a question: What is the difference between protected identity pattern and unprotected identity pattern (set in nam profile editor)? As I understand documentation PEAP-MSCHAPv2 is a tunneled method and it uses un- protected identity pattern to protect user's identity during phase 0. But if I use any fake identity here (anonymous, anonymous@[domain], etc) access is rejected (Access-Reject in switch debugs). I have to use exacly the same pattern in unprotected identity pattern as in protected identity pattern ([username] or [username]@[domain]) to gain access, regardless of authenticaton mode (same in machine only, user only authentication).
View 1 Replies
View Related
Apr 30, 2012
Need to know the step by step procedure for monitoring site-to-site VPN tunnel (up/down) using SNMP on Cisco ASA 5505.
View 1 Replies
View Related
Jan 31, 2011
Is there any way to get reports on voice utilisation on WAN links so that CAC settings can be proactively managed for each location on our CUCM cluster? Our service provider is advising that this is not possible which means that we rely on customer/staff complaints to recognise where CAC thresholds are being reached. Our preference is to be able to run traffic reports (or the Cisco equivalent) as could be done on our previous (traditional) telephony network and provide additional capacity if and when required BEFORE congestion is reached, thus minimising customer/staff impact.
View 1 Replies
View Related
Sep 27, 2011
Runing the report, "CleanAir > Worst Interferers" and I get this error
The specified criteria did not match any data for the report. Make sure that the following background tasks are running: 1. Interferers
I know there is data that should match up because I can see it on the individual controllers. I checked the background task Interferers and it appears to be working as well but just to make sure I forced the "Execute Now" command but the report still failed.
View 4 Replies
View Related
Jul 31, 2011
WCS is reporting few AP's are not associated with it. While troubleshooting, AP conneceted switch interface shows UP/UP and show power inline output gives IEEE PD instead of AIR-LAP1131AG-E-K, after doing a shut/no shut on AP connected interface. Later after sometime AP comes up.
View 5 Replies
View Related
Mar 6, 2012
I'm currently running Cisco LMS 4.1. I need to see if there is a way in the LMS, either through the menu or via a report, that can give me the V LAN numbers, the description, the IP address, the Interface (SVI) the v LAN is on and the route it takes.
I've searched near and far and haven't come up with anything yet.
View 3 Replies
View Related
Sep 26, 2011
we are running WCS 7.0.164.3 and wonder whether is there any reporting option availabel that can give us daily report on Top 50 or Top 100 APs by client count.
I know that I can look at the client tab under WCS home page and see the top 5 APs by client count on real time.In our environment we have around 700 APs and would like to know by having this kind of report which APs are mostly hit ?
View 5 Replies
View Related
Jan 8, 2011
I just upgraded yesterday to the DIR-655 (ver B1, F/W Ver 2.00NA), and suddenly my sons Xbox 360 complains that the NAT is set to moderate. I'm not really sure what this means, but I've never seen it before and it wasn't an issue with my old router. It pertains to the DIR-655? I did some quick google searches and I've seen lots of different 'solutions' to this issue, but none of them seem to agree with each other and I'd rather not spend and entire afternoon trying one after another given that this router kills my internet connection for a full 20 seconds every single time I make any change.
View 4 Replies
View Related
Apr 27, 2012
We have discovered Nortel/HP C-GbE2 switches on our network are sending spanning tree Topology Change Notifications (TCN). The HP switches only have servers connected and no other switches leading to any other network segment so we are not clear why the switches are sending spanning tree TCNs every second. We do not have a support contract. Can anyone on the Cisco side speak to what's referenced on page 5-6 of the attached document? I found the attached document which talks about diabling spanning-tree (page 5-6) in Cisco environment but wanted to consult with an expert before proceding. Document (Configuring Nortel Gigabit Ethernet Switch Modules for IBM BladeCenter in a Cisco Environment Solution Brief.
View 0 Replies
View Related
Dec 23, 2011
I noticed one awkward thing with the latest 1.0.3.5 firmware for the Cisco Small Business RV220W router, with previous firmwares there has always been reported 128mb of system memory (RAM) under the router dashboard. And several "teardowns" of this router has confirmed it to have 128mb of memory on the router board.
Does that mean the latest 1.0.3.5 has an odd visual bug, or has the RV220W gotten it's memory sliced in half with this firmware release?
View 4 Replies
View Related
Jun 12, 2013
Is there any way to determine how much bandwith users on a particular WLAN (Guest) are using on the 5508 or by any other means?
View 9 Replies
View Related
Apr 23, 2013
I'm using ASA 5510 and I wondered if we can configure reporting to know the traffic on each interface,the attacks,the vpn connection during a period ( 1 week or 1 month). For the moment, we can see these logs only in 'real time' .
View 1 Replies
View Related
Jan 1, 2013
We have 2 ASA 5505 located in head office (173.212.xxx.xxx) and remote site (50.34.xxx.xxx) and site-to-site VPN has been established between them.everything is fine but the ASA in head office keeps reporting below 402120 syslog message.
4 Jan 02 2013 12:30:34 402120 50.34.xxx.xxx 173.212.xxx.xxxIPSEC: Received an ESP packet (SPI= 0x384E1C57, sequence number= 0x2AE77) from 50.34.xxx.xxx(user= ) to 173.212.xxx.xxx that failed authentication.
Even though, VPN tunnel is not dropped.
View 2 Replies
View Related
Mar 20, 2011
I have just gotten a new touch phone that has wifi. and i wanna use it through my dlink dir-825 router. My phone is the nexus s with 2.3 andriod OS.The problem is that my phone can see the 2.4 ghz connection it just keeps reporting "deactivated" i did acess other wifi and used the internet over a router. So i know the phone works.
So my question is: 1. Can i make my router ONLY be in 2.4ghz mode, if so, can you link or explain it?
View 7 Replies
View Related
Nov 27, 2011
We have a pair of 6509 working in a VSS configuration (IOS 12.2(33)SX5). The 6509s connect to a pair of ASAs (7.2 code) running in an Active/Standby setup. These ASAs in turn connect to routers going to remote sites. I have configured Netflow on the following VLANS,
VLAN 10 - Servers Vlan
VLAN 9 - Transit/ASA VLAN (connects ASAs to 6509s). All traffic originating from any VLAN on the 6509 crosses this VLAN in order to reach remote sites and vice versa
I configured the netflow source VLAN 11 although I am not collecing any netflow from it.Although I have been getting lots of Netflow info, I noticed that netflow for traffic originating from any user VLAN on the 6509s going to any remote site via TRANSIT/ASA VLAN(9) does not get reported, I even tested with 4 GB traffic but no result. Only reverse traffic (i.e. from remote site to user VLAN) is reported as it traverses the Transit VLAN (9).
I read somewhere that egress netflow is not supported in 6500, but isnt traffic originating from a user vlan to a remote site via the transit VLAN (9) considered ingress with respect to the transit VLAN (9)? I would like to know whether bidirectional Netflow is supported on 6500 VLANS. I have mimimum control on routers beyond the ASAs, and since these ASAs run 7.2 code netflow is not supported, and Monitoring this Transit Vlan gives me extremely useful info.
I do get netflow biderectional traffic from the Server Vlan 10, but I think it is correlated by the netflow collector from vlans 9 and 10. [code]
View 9 Replies
View Related
Sep 27, 2012
I got a question about ACS 5.3 and WLC We have now the ACS 5.3 running for MAB (good working) and TACAS for device AAA.But now our WLC’s will not work.I have created already a special “custom attribute” => role1 / mandatory / ALL Already changed to the combinations Role1=ALL / Role1=All / Role1=all / role1=ALL / role1=All / role1=all But still not working. I get a wrong response.
I followed the guideline in attach, PDF file.
Debug dump from WLC
ACS 5.2 / ACS 5.3
-------------------
*tplusTransportThread: Sep 28 15:07:59.222: auth_cont get_pass reply: pkt_length=24
*tplusTransportThread: Sep 28 15:07:59.222: processTplusAuthResponse: Continue auth transaction
*tplusTransportThread: Sep 28 15:07:59.388: tplus response: type=1 seq_no=4 session_id=b1fddbfc length=6 encrypted=0
[code]....
View 3 Replies
View Related
Apr 20, 2011
I have Cisco ACS 4.2 since few days users can not change their password, what could be the issue? Even after resetting the password I got error.
View 3 Replies
View Related
Aug 17, 2011
I have a dot1x client with client certificate working well with my ACS 5.2 and EAP-TLS. Now I would like to configure the Re-Auth periode on the ACS 5.2, I did the following:
1. Configure a Access Profile with Reauthentication Timer = static and 30 seconds (see attachment ACS1.png and ACS2.png)
2. Enabled authentication periodic and authentication timer reauthenticate server on switchport
interface GigabitEthernet1/0/x
description to dot1x clients
switchport access vlan 5
switchport mode access
authentication event fail action authorize vlan 998
[code]....
View 2 Replies
View Related
Sep 12, 2012
I've got an issue with my ACS 5.1 implementation not updating any of the RADIUS or TACACS authz, authc, or acct records. Nothing is showing up, even though i've logged in via TACACS to several devices, and there are numerous wireless devices authenticated and online via RADIUS right now.
View 3 Replies
View Related
Mar 4, 2013
I have to created command set under "Policy Elements>Authorization and Permissions>Device Administration" for limited access user in ACS 5.3. Like i triyed to give them permission to only few show commands. I have set user priviledge 1, 7, 10 however either of the priviledge level user was able to run those commands. I works like the shell priviledge level.
View 1 Replies
View Related
Mar 31, 2011
We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional 2 port NIC card. This produces 4 ports on the ACS server(G0 through G3).After initial setup of the ACS server with an IP address on G0, I connected a Windows 7server with IE8 to G0. The ACS web interface appears (after accepting certificate) and Ientered some user accounts and NDGs.I then connected the ACS server to a configured port with port-security on our 6500switch. The port becomes err-disabled since the MAC address does not match up. It appearsthat the onboard NIC on the ACS server is bonded thus producing the MAC address issue.To fix this connection issue, on the ACS server, I cleared out G0 and setup G2 (additiional NIC card) with the IP address. After connecting to the 6500 switch, the ACS server port works fine. I removed the connection to the 6500 and connected the Windows server to the ACS.I can ping the ACS server but the web interface is now unavailable unlike before. I do not get a certificate warning on IE, it just states that internet not available. On ACS, the 'show' status of acs shows all the processes are running and initialized. It has got me stumped as all I did was change NIC configurationon the ACS server.
View 8 Replies
View Related
Oct 9, 2011
we updated our NAC appliances from 4.8.1 to 4.9 and have noticed that web authentication is no longer woking on Apple IOS devices. We had setup a user page for the MAC_ALL OS and iphones etc. were able to authenticate using thier browser ok. Now (after the upgrade) after they authenticate they receive the below warning.
There doens't seem to be any other config changes we can make for the IOS device.
View 2 Replies
View Related
