LMS 4.21
Solaris 10
Trying to schedule a Best Practices Network Discrepancy Report everything works find (reports could be scheduled) except entering a eMail-Address in Textfield: E-mail.
Hitting the Submit Button results in nothing, no popup stating the created job ID; without any content in this field a job is able to be scheduled.
I have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 Replies View Relatedwhy one of my two offices experiences significantly slower speeds when accessing the web. I'm a complete technology simpleton, so I haven't been able to figure out a logical reason for it. Here's the scenario:
Office 1..................................................Office 2
==========..........................................===========
Comcast Business.....................................Comcast Business
tests at 33 mbps down..............................tests at 7 mbps down
tests at 6 mbps up....................................tests at 3 mbps up
6 CPUs access Linksys SR216 10/100 switch..6 CPUs access 3Com Office Connect Ethernet Hub
switch accesses Comcast modem.................hub accesses Comcast modem
My laptop, and all other CPUs, perform significantly faster at Office 2.
Is it the difference between the switch at Office 1 v the hub at Office 2? I always thought they were sort of the same thing. I know I've taken some of the cables out of the switch in Office 1 and put them directly into the Comcast Modem and haven't seen any improvement.
Why on earth does my laptop perform so much better at Office 2. I've also moved desktops to Office 2 and they are noticeable faster at that location as well. I'm stumped. We access a major company's web site for account servicing, and it is twice as fast at Office 2...while using the exact same laptop.
Unable to run Eos/EoL report, I get error that my cisco.com credential are not valid, I verified my credential and they work fine. I'm running RME4.3.2 on Solaris 10.
View 3 Replies View RelatedI am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014..I am using LMS 3.1 attaaching snap shot of my patch level and application version running on LMS...
View 3 Replies View RelatedAny way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage. They haven't frozen cause I can still connect to them via a browser
View 2 Replies View RelatedWe are using Cisco 100 Series Unmanaged Switche, model SF100D-16 in our network drawer for land and OFF-shore use. As per the data sheet on the below link, the dimensions of this product should be 5.12 x 1.52 x 5.12 inches (130 x 38.5 x 130 mm).But our current batch of 40 pieces are of a different dimension. i.e 6.29 x 3.54 x 1.69 inches (160 x 90 x 43 mm) url..We have designed an 1U drawer to install this switch based on the dimesions in the datasheet. But now it is not going inside the drawer because of this 5 mm extra height.Not sure how this descripancy occured between data sheet and physical part. Now I am looking for a 16 port with same configuration of model SF100D-16, with 40mm or less height.
View 1 Replies View RelatedI have installed DCNM 5.2(2c) on windows box to manage Nexus 7K devices.\ have for the time being one device that i have manage and i see often the following text:Discrepancy in device accounting log,Recommended action: clear the accounting log and discover the device. Device details are not available.How can i delete the accounting log and why do i have this message ?
View 4 Replies View RelatedI have the following problem in LMS 4.0. I see a lot of CDP syslog messages about Native Vlan Mismatch, but the LMS doesn't report it in the disrepancy report. Why?? The similar problem is with TRUNK VLAN Mismatch. The customer doesn't use VTP in his network. All switches are in the VTP transparent mode.
View 1 Replies View RelatedI have a dir-655 and have two schedules set up, one for weekend and one for week days, for wireless access. Is there a way to switch from one schedule to the other automatically?
View 1 Replies View RelatedWe have two 5508s in a boarding school environment and about 5 wireless networks. Administration wants to know how can we shut down the student networks @ 11:30pm and then have them come on @ 6:00am. Othern than doing it manually is there another way?
View 3 Replies View RelatedThis week, I replaced a netgear FVS318G with a Cisvo RV180, firmware 1.0.2.6. I have a very limited knowlege of routers and protocols, mostly from exposure as a home user. My goal is to define firewall rules on my RV180 that define when my tween-aged kids can and cannot play on X-Box live, as was the case on the FVS318G. I am aware that X-Box has several port ranges. Specifically, I have defined the following for one XBox port range to always block, as an example:
[code]...
A similar rule on the FVS318 would block XBOX (and also on a schedule), but this is not the case on the RV180. I guess I don't uderstand how to correctly implement rAccess Rules on this device.
Is there any way to schedule the shutoff of WiFi every night between certain hours?
View 1 Replies View RelatedWireless is still on also after time set in the schedule is over. I connected to the router through its web page and set wireless on with schedule from 8 am to 9 pm. But wireless is running also after 9 pm. I checked the time settings on the router and they are correct. FW version is 2.01
View 1 Replies View RelatedI would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
I own a WRT54G linksys router. works really great but i'm missing two features - being able to change the tx power - being able to turn wifi off on a schedules you can guess, i'm being apprehensive regarding EMF, so i'd like to turn off wifi at night and lowering the tx signal to the minimum required.the question: i saw two alternative firmware, dd-wrt and tomato, I think they both offer the tx signal control but no one has wifi schedule. do you know if there is a firmware which specifically gives me the requirements i need?
View 2 Replies View RelatedCan I schedule a weekly reboot with this router?
View 3 Replies View RelatedI was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
View 3 Replies View RelatedDIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
I just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.
I have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
How to schedule automatic Xlate sessions cleaning in ASA5550. I want to clear few global nat sessions manually every week.Is there any way to automate that?
View 1 Replies View RelatedIs it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies View RelatedRegion : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
This is on a DIR-655, firmware 2.01NA, hardware rev B1.Is there a limit on the number of DHCP reservations that can be added to this WAP?This WAP was working fine with 10 DHCP reservations (wired & wireless devices), 6 schedules, Access control of 2 devices by MAC (6 defined, only 2-3 active at a time).I started adding additional DHCP reservations, because I'm simplifiying my network, and when I add the 26th DHCP reservation I get the message "Schedule rules is Full! Please Delete an Entry."
I've been adding all of the new DHCP reservations as disabled, but I haven't assigned any schedules or otherwise to these new devices yet. So what's up with this message??
Is it possible to create a managed schedule to switch the wireless radio on/off? I want to set a start time and a stop time so that e.g. the wireless can be switched off during nighttime.
I had previously routers from both dlink and zyxel and they both had this feature.
I am sensitive to electromagnetic radiation and bought the EA4500 due to the 5 Ghz capability, - but then only to discover that the radio always has to stay on (at least as far as I have found out.
I realize that this is a new product, but nevertheless I have some feedback after running my 4 new DCS-930L camera over the past few days.
Currently, you can configure the camera to EMAIL/FTP images on a schedule or when motion is detected, but not both.
Why does it matter? Because I get flooded with email alerts after I get home from work and later in the evening every time I walk by one of the cameras or whenever a light switch is turned on/off.
If I could configured the motion detection to only alert during a specified schedule of days and hours, it would be great!
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1_121225
ISP : Cogeco
I bought the 4300 a week ago - and just recently discovered that you cannot turn off the wi-fi radio using a schedule.
I thought this was "wireless router 101" - since my last three routers had this feature... apparently not with TP-Link.
I'm new to CiscoWorks and I inherited the system in my new job. We are running LMS 3.2 and I want to run a report to see what versions of IOS that are running on the network.
View 3 Replies View RelatedI have cisco acs 5.3 appliance. Issue is, when i view tacacs accounting it only shows 100 pages of records. So first kindly tell me if this is the limitation of acs 5.3 to only show 100 pages. Secondly if i want to export the report of last 30 days, its also not showing the last 30 days.
How to get the report of last 30 days
I have an issue with rme 4.2 from LMS 3.1 When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
View 4 Replies View RelatedIs it possible to run an uptime report using CWLMS 3.2 ?
View 2 Replies View RelatedI am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco.Saw an update i LMS portal as this:
Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT/EOX updates (To be applied on or before 15-June-2011)
so upgraded the patch cwcs33x-win-CSCto46927-0.zip and restarted the demeon as read in the read me file for the patch.Now the job execution status is always shows running, its neither fail nor pass.