We have two 5508s in a boarding school environment and about 5 wireless networks. Administration wants to know how can we shut down the student networks @ 11:30pm and then have them come on @ 6:00am. Othern than doing it manually is there another way?
View 3 RepliesWe've recently boughten new equipment to upgrade/replace some of our aging wireless hardware. We're moving to a pair of 5508 controllers and changing over to ACS 5.4. Currently we're just doing MAC filtering with ACS 4.2 and local users. I'd like to move most of our SSIDs to some type of AD authentication. Are there any all encompassing guides that layout the design behind that? So far I haven't had much luck finding one!
Also, would it be possible to maintain some of the local ACS users/MAC filtering? We have some mechanical equipment that connects to our network (separate SSID) but cannot join a domain.
Wireless is still on also after time set in the schedule is over. I connected to the router through its web page and set wireless on with schedule from 8 am to 9 pm. But wireless is running also after 9 pm. I checked the time settings on the router and they are correct. FW version is 2.01
View 1 Replies View RelatedI just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.
I have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
Is it possible to create a managed schedule to switch the wireless radio on/off? I want to set a start time and a stop time so that e.g. the wireless can be switched off during nighttime.
I had previously routers from both dlink and zyxel and they both had this feature.
I am sensitive to electromagnetic radiation and bought the EA4500 due to the 5 Ghz capability, - but then only to discover that the radio always has to stay on (at least as far as I have found out.
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1_121225
ISP : Cogeco
I bought the 4300 a week ago - and just recently discovered that you cannot turn off the wi-fi radio using a schedule.
I thought this was "wireless router 101" - since my last three routers had this feature... apparently not with TP-Link.
I have a dir-655 and have two schedules set up, one for weekend and one for week days, for wireless access. Is there a way to switch from one schedule to the other automatically?
View 1 Replies View RelatedI have ACS 5.2 and would like to know if I can schedule a report to be sent to my email address each Sunday for example for all the failed and succeeded attempts for devices authentication.
View 3 Replies View RelatedThis week, I replaced a netgear FVS318G with a Cisvo RV180, firmware 1.0.2.6. I have a very limited knowlege of routers and protocols, mostly from exposure as a home user. My goal is to define firewall rules on my RV180 that define when my tween-aged kids can and cannot play on X-Box live, as was the case on the FVS318G. I am aware that X-Box has several port ranges. Specifically, I have defined the following for one XBox port range to always block, as an example:
[code]...
A similar rule on the FVS318 would block XBOX (and also on a schedule), but this is not the case on the RV180. I guess I don't uderstand how to correctly implement rAccess Rules on this device.
Is there any way to schedule the shutoff of WiFi every night between certain hours?
View 1 Replies View RelatedI would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
LMS 4.21
Solaris 10
Trying to schedule a Best Practices Network Discrepancy Report everything works find (reports could be scheduled) except entering a eMail-Address in Textfield: E-mail.
Hitting the Submit Button results in nothing, no popup stating the created job ID; without any content in this field a job is able to be scheduled.
I own a WRT54G linksys router. works really great but i'm missing two features - being able to change the tx power - being able to turn wifi off on a schedules you can guess, i'm being apprehensive regarding EMF, so i'd like to turn off wifi at night and lowering the tx signal to the minimum required.the question: i saw two alternative firmware, dd-wrt and tomato, I think they both offer the tx signal control but no one has wifi schedule. do you know if there is a firmware which specifically gives me the requirements i need?
View 2 Replies View RelatedCan I schedule a weekly reboot with this router?
View 3 Replies View RelatedI was just curious if there was a way to allow a computer and a ps3 to have unrestricted internet access while at the same time preventing other devices from connecting to the internet at a scheduled time (12 am to 8 am for example)?
View 3 Replies View RelatedDIR-615, HW rev. H1, FW v8.02
As the subject says... Sending logs using "On schedule" option doesn't work. I have my own personal email server I used to test this. When the router time reaches the defined "Start time" nothing happens. I tried both time formats (12h, 24h). The router does NOT initialize the process of sending the email. I see that in my server mail logs. If sent manually from Status -> Logs -> Email now, it works. If sent using "On Log Full" option, also works.
Any way to schedule a reboot of a DCS2102?I've got 3 of them here, and they are very good but every now and then they seem to stop writing to the storage. They haven't frozen cause I can still connect to them via a browser
View 2 Replies View RelatedHow to schedule automatic Xlate sessions cleaning in ASA5550. I want to clear few global nat sessions manually every week.Is there any way to automate that?
View 1 Replies View RelatedIs it possible to get a time and date stamp on the image when using the FTP on a schedule? The time and date stamp is shown on a live video image on pages 20 and 21 of the manual but I'm not seeing how to get it on snapshots.
View 3 Replies View RelatedThis is on a DIR-655, firmware 2.01NA, hardware rev B1.Is there a limit on the number of DHCP reservations that can be added to this WAP?This WAP was working fine with 10 DHCP reservations (wired & wireless devices), 6 schedules, Access control of 2 devices by MAC (6 defined, only 2-3 active at a time).I started adding additional DHCP reservations, because I'm simplifiying my network, and when I add the 26th DHCP reservation I get the message "Schedule rules is Full! Please Delete an Entry."
I've been adding all of the new DHCP reservations as disabled, but I haven't assigned any schedules or otherwise to these new devices yet. So what's up with this message??
I realize that this is a new product, but nevertheless I have some feedback after running my 4 new DCS-930L camera over the past few days.
Currently, you can configure the camera to EMAIL/FTP images on a schedule or when motion is detected, but not both.
Why does it matter? Because I get flooded with email alerts after I get home from work and later in the evening every time I walk by one of the cameras or whenever a light switch is turned on/off.
If I could configured the motion detection to only alert during a specified schedule of days and hours, it would be great!
I have a wireless lan and a USB Modem Can I use Both at the same time to download two files each file on a lan
View 1 Replies View RelatedI have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedMy PC usually shows me a list of wireless connections when i click on that icon.Today, however, it is not showing the list and displays the following message instead:'windows cant configure this wireless connection.' no list, so i am not able to connect to my network.i tried setting up a wireless network through wizard but to no avail. I dont know why this is happening. i got a new wifi modem. i cant even blame the new connection alone, because before that my pc at least used to show other inaccessible wireless networks in the list. but today it shows nothing.i have a windows xp.
View 1 Replies View Relatedi cannot connect to the available network even the homegroup.i have do troubleshoot but it cannot fix.and tell that i have problem with my adapter network..
View 1 Replies View RelatedI've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....
View 9 Replies View RelatedMy friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.
View 3 Replies View RelatedMy current project is to have a printer that actually works. You don't need one often, but when you do you really need one. I'd like the printer to be wireless as we all use laptops but don't want to have the printer near the router.
The simple solution is to shell out for a wireless printer, but I have access to a cheap (and good) ethernet only printer. Now, how to connect it? I have a spare old router, which I'm thinking of connecting to the printer. I'd then have to get the router to join the network (is that possible?) or somehow bridge them. The to devices to join would be this and this.
I've just reformatted my computer and reinstalled windows xp but i can no longer find the window where you search for available wireless networks. It used to be a little icon in the bottom right of the task-bar.
View 6 Replies View RelatedI have a windows xp system with a dell wireless WLAN card. I have found that when I try to connect to certain wireless networks - most recently the BBox network through Bouygues Telecom in France - it will connect, work fine for a minute or two, and then disconnect automatically. I can reconnect by going into the WLAN Card Utility and re-entering the WEP password, but I don't know why it cuts off automatically. I also noticed the same thing happening while trying to connect to a friend's wireless in London, England (not sure what the provider was). Other computers don't seem to have the same problem.
View 1 Replies View RelatedWhen i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies View Related