I am having a ASR 1002 V 12.2(33)XND2t which is running on Tacas?I want when i login it shoudl directly go into the # prompt. I am not interested in typing enable on > prompt.
The configs are:
aa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default none
!aaa authorization console
!aaa authorization config-commands
[code]....
how to straight away enter priv EXEC mode when authenticated for asr1002?? Using XR12000, it can be done but asr1002 have to input enable passwd...my username for asr1002 have privilege 15 and i want to enter priv EXEC mode straight away after login without asking the enable passwd.
View 4 Replies View RelatedI have created users and given them telnet access to router 7200. They have full privilges(15) but everytime they login they login into user-exec mode instead of privilege mode. Is there a way to skip user-exec mode and allow the users to login directly into privilge mode so they dont have to enter password twice?
View 2 Replies View RelatedHaving issue with WLC 5508 using ACS 5.2 tacacs+ protocol to do device management.The problem statement is after key in the username and password on the WLC login page, it is endlessly prompt for authentication on WLC. Whilst on ACS monitoring and reporting i able to see it is successfully authenticated, shown at AAA protocol > TACACS+ Authentication.On ACS, the shell profile for this is setting role1 , value = ALL.
View 3 Replies View RelatedIs it possible to configure WLC so that only one user can connect to wireless network at a time with one login? We have WLC5508 (7.2.103.0) web authentication with LDAP (Active Directory).
View 2 Replies View RelatedI have a ACS 5.1, My mailing server does not run on standard port number of smtp (25). Need to know if i can customize the port number suiting my mailing server requirement.
View 0 Replies View Relatedhow can I import a public or private key in a router? For example, a Cisco 3560th I have found some conflicting answers @ cisco.com . Background, I would like to login with PUTTY via ssh on a Cisco Router but without username and password.The login should be made with RSA Keys. For this I need to deposit on the IOS device's the public key and on my Client the private key. For this I've already created with PuTTYGen the two keys. The private is in the ppk format. I still need to convert this into a different format? Since there are PEM and PKCS. Below you can see what times I have entered. With the error message: "CRYPTO_PKI: Import PKCS12 operation failed, failure status = 0x705" With the following error message I can do anything?
View 2 Replies View RelatedI have two ACS 5.2 working in redundancy Primary and Secondary my question in when my primary ACS goes down i can´t see the log in the secondary ACS. I read in the documentación that only one ACS can be configurated for working like logg collector server. Now I configurated my secondary ACS like logg collector server now when my Primary ACS goes down i can see the logg. Finally when my Secondary ACS goes down i can modified the ACS Primary Configution by show me the logg.. Is possible to do this automaticaly for show me the event logg ? when the ACS that is configurate like logg collector server goes down pass the event other ACS automatically..
View 3 Replies View RelatedFew days ago in my wireless infrastrucer i deploy Cisco ACS 5.0 with Active directory integration. My wireless users are login through web authentication process. The authentication process is passed by AD & its working fine. But i want to do a work on my ACS 5.0 that a user cannot login simultaneously multiple device at a time.
View 21 Replies View RelatedWe have an ACS 4.2 installation and we have users configured on the user setup, they authenicate using the windows database (AD). We ran failure tests and simulated AD failure but disabling the firewall rule. So the ACS server is up, AD is down. Tested user login to a switch and get the following error. External DB user invalid. It looks like as the ACS does not get a response from AD it rejects the user login.
What we want it to do is in the event of AD failure is to be able to login to the switch with the username configured on the switch. (as if ACS server does not respond)
Date Time Message-Type User-Name Group-Name Caller-ID Network Access Profile Name Authen-Failure-Code Author-Failure-Code Author-Data NAS-Port NAS-IP-Address Filter Information PEAP/EAP-FAST-Clear-Name EAP Type EAP Type Name Reason Access Device Network Device Group 02/03/201214:09:13Authen failedtest.testNetwork192.168.1.1(Default)External DB user invalid or bad password....tty310.0.0.1..........SWITCH30Office
Is it possible to track failed login attempts to ACS instances (both on CLI and web GUI) by snmp? unfortunately i haven't found such option in Monitoring and Reports > Alarms > Thresholds >
View 2 Replies View RelatedI have an ACS 5,2.0.26-8 running on VM intergrated with RSA. Users are able to login using their RSA passcode for network management utilizing TACACS. The problem seam to be related with RSA token caching. Once a user login sucessful on device A using current token he can not login with the same token on another device. User must wait for a new token and then he can login again. Before moving to ACS 5.2 we were using ACS 4.2 (intergrated with the same RSA) and back then ACS 4.2 cache passcode so user where able to login on devices using the same passcode. When the token change user have to use the new one. providing the same functionality like the "Token Card Settings" Durantion option under group properties, to cache token for a specific period. The global option for caching under RSA definition on 5.2 does not solve the problem.
View 4 Replies View RelatedI've configured three specific AD groups, Admin, Storage, and HelpDesk, with their own commands sets.
This seems to be working fine, but everyone can log into everything, but they can't do anything except exit.
My goal is to not allow anyone to login that is not part of the three AD groups I have specified with the respective command sets.
All the logins hit the Admin account, even though the id in AD is not in the that AD group. I have something screwed up.
How to see the ipsec vpn client users login history, they are authenticating to the local AAA, not to active directory. I am able to see current login session. by going to monitoring vpn statistics sessions this shows me current sessions but I would like to see for example logins for vpn client for the last month.
View 11 Replies View RelatedI've set up a ACS 5.1 Server an want to use it with our LDAP System. Therefor, I'm trying to login to a Cisco 1841 by using my LDAP Account, but it dosent work. The ACS seems not to know that it should use LDAP, because I get,"22056 Subject not found in applicable identity stores"LDAP is configured as Identitiy Store, the bind test works successfully and I created a sequence, where LDAP is at first position. What goes wron?? (TATACS for loal ACS Users works)
View 3 Replies View RelatedI have successfully set up a 5505 as a cut-through proxy so that wireless users are required to log in when they open a browser to access the Internet. Is there a way to take them to the original page they requested after the login is complete, rather than having it sit at the screen where it is says they are logged in?
View 1 Replies View RelatedI'm trying to make a setup on my Cisco 881 router, but I'm having some trouble.I've managed to configure logging in with a Public-Private key pair over SSH, but it's also still possible to log in over SSH with just a username and password. I'd like to prevent this, if possible. I imagine I might have manually configured this to be allowed at some point, but I can't quite figure out how I did this, as no matter what I've tried to remove, it keeps allowing this option. I still need to be able to log in with a username, because I want users to have different privileges.
Once I've logged in using the Public-Private key, I don't automatically go into privilege mode, even though the user is configured with a privilege level. I'd like to configure that users that I've configured to use a certain privilege mode, automatically go into privilege mode without a password prompt. I know it did this before I started using the Public-Private key (or before I used AAA, which was configured around the same time), so I wondered if it's possible to do this still.
Is there a way to put a login banner on the ACS admin web page? Either display it directly on the web page or do a redirect to a banner page? Can I edit the admin pages directly or does ACS provide a mechanism to add this type of feature?
We are using ACS 5.3 running on VMWare.
I'm unable to login Switch.......getting following error...I have tried this commands on other 3560 that worked...when I enter user name & password re logging authentication failed error occurs .........This is remote site Switch.
[code]...
As observed ACS 5.x " Change Password on Next Login" Feature does not work with SSH Clients ( tried with X-sheel, Secure CRT, Putty etc...) , however through telnet session to IOS devices, users can change their password on their next login.
1: on ACS 5.x i create a new user & Set " Change password on NExt Login" option.
2: Logged into the device through Telnet & Password can be changed after i authenticate successfully. however the same is not happening when i login to the devices through SSH.
is it because of the fact that SSH is encrypted session ?
Because changing password through a telnet session is not accepted in many fanancial organizations as per PCI Standard.
I would like to make a centralized management of loggin account on my cisco switch (with a radius server). But, on Cisco 3750 E, i use 12.2(44) SE1 IOS and no command aaa authentication login exist.
Cisco 3750 can support other IOS than 12.2 who have this ability ?
what is the maximum number of AAA clients supported by a single ACS5.3 instance?
View 1 Replies View RelatedWe`re using a WLC 5508 with SW 7.2.103.0.The most things are working fine, but i have a problem with the web auth.
Setup:
- Max Concurrent Logins for a user name is set to 1
- Max-Login Ignore Identity Response is set to enable
- Web Authentication Type is set to customized
The Problem:
- the user "test" is logged in at device1 (working), the same user "test" try to login at device 2 (is not working, fine!) -> login is not accepted, WLC redirects to the INTERNAL Web Login Page.The problem is the redirect to the internal web login page after failed login. If i try to login with a not existing user, the redirect is working perfect to the customized web login.
I have a need to allow a small group of users temporary level-15 access to several 6500 switches (running 12.2-33 SXJ2 code), but do not want to provide them with the enable secret password which is used on the rest of the network (over 1200 devices). I tried to eliminate AAA using the "no aaa new-model" command, but was told I could not remove aaa while there were active sessions, and "login local" no longer appeared as an option for vty lines. So, I created a local user database called "support" which I used to replace the "group" entry in the authentication and authorization sections of our AAA config and for login on vty 0 4. [The username is given a privilege level of 15 along with an individual password for authentication. (ex. user name jsmith privilege 15 password 0 xxxxx)] I modified our AAA configuration to support local login, but was unable to establish "enable mode" (i.e. # prompt) with any account. I can login locally, but only to a normal "user mode" (i.e. > prompt).Here is the current, unmodified and sanitized config for our AAA and line vty 0 4 sections. [code]
View 2 Replies View RelatedI configured the below config in Routers it is working good , but when i do the same in SWITCH-2960 , i am getting a problem not able to login to enable mode ... i am getting the basic login only ....
Error msg : % Error in Authentication.
Need to be configured at TAFE Network Devices: Code...
We have dialup users that are connecting to our portal for uploading/downloading credit information. We are currently using ACS 3.3. There is a requirement that, initially we provide clients with their username/password, but we want to enforce the policy that when the user logs in first time, he should be prompted (forcefully) to change his password.
1) Can this be done in ACS 3.3
2) What solution shall be used in this case ? can it be done in ACS 5.3 ?
Im trying to configure a 7204 for radius login authentication, although the router is also configured with radius for VPN access. How can I configure it for both using 2 different raidus servers? the login via radius is working fine on another router, although that one is not doing VPN access so there's no conflict.
My config:
aaa group server radius RADIUS_AUTH server x.x.3.11 auth-port 1645 acct-port 1646
aaa authentication login networkaccess group radius local
[Code]....
For some reason, this does not work. I cannot access the router and authenticate via x.x.3.11 radius server. I think there's a conflict between the VPN and the login authentication but im unsure how to resolve this.
In CLI we have users log in at priv 1 and use "enable" to increase privilege and do configurations. This allows "accounting" of command history. On the AIR-AP1121G-A-K9 (12.3(8)JED1) I cannot duplicate this for http login.
I can log in as a user at priv 1. When I try to go to a privileged link like "Security" I get prompted for a second login/pw. Nothing works here unless I have a second user defined at priv 15 and enter that login/pw. The problem is - that login/pw can be used to log in via http in the first place which bypasses accounting of the actual user. It also allows login to the CLI at priv 15 which I cannot permit.
username test1 secret 5 abcdxxx
username test2 privilege 15 secret 5 efghxxx
enable secret 5 ijklxxx(code)
I just setup ACS 4.2 on windows 2008 standard server. I noticed that after a while, i could not launch the ACS from desktop. All services are up, i have restarted server a couple of times....The Program appears to launch and the disappears..
View 2 Replies View RelatedI'm setting a Wireless Guest with a WLC 5508 (7.3) and ISE (1.1.2) -- (no anchor).It appears to work (still some adjustments are required), but I found when the guest user log in, it receives the successful login screen and inmediately the guest portal again. If another browser window or tab is open, the user can browse properly.
View 5 Replies View RelatedI have some tunnels which terminate to my home router. I'm allowing the other ends of the tunnels to use my voice setup. I need to prepend *67 to all called numbers which don't originate from my house. I don't want people calling my home number based on the caller-id number they see when someone across one of the tunnels calls.
So if 5008 calls 212-333-4444 I want it sent to my provider as *672123334444. If 5001 calls a number, I don't want it touched. Can I do this? I can use IOS or CUCM here.
I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies View Related