Cisco Application :: ACE 4710 Multiple Services Running On Load Balanced Servers
Jan 30, 2012
Our Exchange 2010 hub servers run multiple services/ports: smtp, www, pop3,135, 143, https, 993, 995, 6001,6002,6003,60200,60201,8400, and 8402 what is the best way of balancing these servers so that if only one of the services failed on a server, it would switch only the failed service to remaining servers. At present I only use an smtp probe, so as log as that sevrice is running the server is marked good.
View 3 Replies
ADVERTISEMENT
Sep 18, 2012
I'm configuring ACE 4710's for the first time and I want to load balance my Nuance speech servers on port 554. Here's my configuration on ACE01:
[code].....
View 23 Replies
View Related
Apr 22, 2012
I configured ACE 4710 for HTTP traffic. All applications are running through real server. But when I run the same applications from virtual IP i.e through ACE. some applications are not running. Particularly applications having XML.
Is it ACE issue or Application issue. If it is ACE issue then how to troubleshot.
View 1 Replies
View Related
Nov 8, 2011
SIP Load balancing Issue with ACE 4710?I have a Cisco ace 4710 with vesion Version A4(2.2). i configued simple SIP load balancing first without stickiness. without stikeiness we are having a problem because bye packet at the was not going to the same server all the time that left our port in used even though user hang up the phone. its happen randmly. i have a total 20 licenced ports and its fill out very quickly. so i dicided to use the stickiness with call-ID but still same issue. below is the config
rserver host CIN-VOX-31
ip address 172.20.130.31
inservice
rserver host CIN-VOX-32
ip address 172.20.130.32
inservice
[code].....
View 6 Replies
View Related
Mar 25, 2012
I am receiving this error while the device is booting up :
kernel=(hd0,1)/c4710ace-t1k9-mz.A5_1_1.bin ro root=LABEL=/ auto console=ttyS0,9
600n8 quiet bigphysarea=32768 [Linux-bzImage, setup=0x1400, size=0xe719b73]
View 1 Replies
View Related
Aug 13, 2012
Experienced the same sort of behaviour with an ACE 4710 version A3 (2.5). When trying to connect to a webpage on port 443, the pages over 1 minute to download fully. I have timed the download using the plug-in firefox. What is strange is that the browser successfully makes the connection, 200OK etc, but each 'get' takes a very long time to transfer. If I go directly to the server and don't pass via the ACE the page takes between .7 and 1 second to transfer.Is there a way to speed this transfer up, I am currently looking at connection maps.
View 1 Replies
View Related
Dec 13, 2011
We are using Cisco ACE 4710 for load balancing the servers. The predictor used is 'least connections'.Have observed the below;The number of connections for a particular server in a serverfarm is 15 in the Cisco ACE.The actual number of users in that server is 6.All the users access using the VIP.Still i couldn't understand why there is difference in the number of users in the server and the load balancer statistics.
View 2 Replies
View Related
Oct 16, 2011
How to load balance two/three ISPs using ACE.
What might be the default gateway?Can i create a serverfarm with two rserver with different subnets?
View 4 Replies
View Related
Jul 7, 2012
We have two Cisco ACE 4710 and we want to install both of the devices in HA with load balancing mode.While i have done HA mode configuration between ACE 4710.But unable to configure load balancing configuration between them.i want to tell you connectivity between server,client & loadbalancer.Our Web servers are connected to VLAN 152 on the L3 (3750) switch.Which are alreday working in redundancy between other L3.And ACE 4710 it is also connected to vlan 150 which are connected to same L3 (3750) switches and users are also connected to vlan 6 on the same L3 itself.
View 2 Replies
View Related
Jan 25, 2012
We have deployed an ACE 4710 and its working perfectly. But the problem is that after I chage the default gateway of the servers I am not able to transfer files from one server to other. Is there any special configuration needs to be done on ACE to achieve this?Other than copy Ping, telnet and everything is working fine from the servers. These servers are in the same subnet & VLAN.
View 3 Replies
View Related
Jan 22, 2013
I am configuring a load balancer from cisco, a ACE 4710.Load blancing is completely new to me, and i am unexpereinced in this field. It has to be configured for a customer that want to load balance HTTP and RTSP traffic over 4 application servers (Back-end),I searched alot on google for possible solutions, and got RTSP in some way to work, but http wont work says my customer.
[Code] .....
View 3 Replies
View Related
May 16, 2012
Can an ACE 4710 have , in the same context - servers which are
a. just being routed to
b. a set of load-shared servers
I have been told you may not be able to do this on this version?
View 2 Replies
View Related
Apr 16, 2012
Have two ACE 4710 in HA setup. We would like to setup HTTPS loadbalance(actually just a primary and standby configuration in the serverfarm). Initially this would be for Exchange OWA connections but may expand to more HTTPS connections later. I know there are several ways to do SSL with the ACE( client, server, end-to-end). I am just wanting to know the easiest way to deploy this? Is a certificate always needed on the ACE for each connection? In HA mode would a certificate be needed for both or does it replicate in some way to the other ACE?
View 6 Replies
View Related
Nov 15, 2011
I am trying to configure ACE 4710 to load balance base on the URL, If it matches the specific URL ( /456/ ), the traffic will be sent to server farm 456 else the traffic will be sent to server farm 123.
I attached an image of the topology.
Ace Config:
rserver host SRV01_123
ip address 192.168.1.101
inservice
[Code].....
View 4 Replies
View Related
Dec 3, 2012
I am performing a deployment, in which i require clarity on the following. Our setup has DC and DR , in each site we have two devices for HA.We have received One SSL Certificate from Public CA, Kindly clarify the following doubts i have on thisIn Doc, i found Cert.pem and key.pem is required to generate the pair ,do i receive both Cert.pem and key.pem from the CA or we can generate key.pem from Cert.pem ?SSL Offloading is planned for the X application, and it is running in both DC and DR ( Considering each having their own Public IP address ) , do i need to have two different public certificates or a single certificate can i use in both DC and DR.Load Balancing IssueIs it possible to configure in ACE to access the service in Business hours and in non Business hours to display HTML page showing this is available only during these hours ?In DC we have Three Web Servers ( only in One physical server the service is active, other two are backup ), and these three servers are under cluster and shares one cluster IP , In ACE we have created the VIP and Pointed to only Cluster IP ( like pass through only ). The issue we face is if active web server is down, even then ACE is sending the traffic to that webserver only instead of sending it to the new Active web server. let us know if any solution is there to overcome this issue ?as per my understanding instead of giving cluster IP as real server IP we can issue the three physical servers. now i dont require load balancing between three servers instead require failover king like if first server is down then it should forward to Second server ?
View 4 Replies
View Related
Oct 14, 2012
I've done a lot of ACE work over the years but this is the first time this has ever come up.
I have a request from an application group where I have 3 rserver in the server farm but they want all traffic to only go to the first server unless that server fails. If the first server fails, only then do they want traffic to go to the 2nd server instead and if that fails, then traffic goes to the 3rd.
I've read through the documentation but haven't figured out a way to do this. What to do this type of failover configuration?
View 4 Replies
View Related
May 13, 2013
I have trouble with new installation LB ACE 4710 for Oracle application load balance. Problem: Unable to PING VIP - 10.11.10.55 / 24
Below are the simple configuration parameters:
1. ACE 4710 is connected with Cisco 3560 Switch - L2 Trunk (Channel Group)
2. Cisco 3560 Switch is connected with Cisco 6500 Switch (Core) also L2 Trunk
3. There are 3 Vlans,(255, 310, and 370), Vlan 255 is management Vlan
4. Real Servers and Virtual IP are part of Vlan 310
- VIP - 10.11.10.55
- Real Server1 - 10.11.10.46
- Real Server2 - 10.11.10.47
5. Gateway is 10.11.10.1 (vlan 310), 10.11.70.1 (Vlan 370)
View 5 Replies
View Related
May 26, 2011
I'm setting up an ACE 4710 in our test lab before deploying in production. Do the test web servers I am using need to use the ACE as their default gateway? The are currently configured to use a multilayer switch on their vlan as their gateway but I'm guessing the ACE needs to see the return traffic for load balancing to work correctly?
View 2 Replies
View Related
Oct 17, 2012
I’m looking for some notes from the field guidance here from those that have much more deployment experience.
I have a GSS and an ACE, and its the ACE that's primarily giving me something to think about, in terms of placement and what mode to adopt.
The traffic flow will look loosely like this:-
Client---Internet---Firewall---GSS---ACE---Servers
Physically, it's like this. The RED line denotes a boundary, and pretty much anything North of that is not accessible to us, we simply have a L3 trunk between our switches and "their" switches (S3/S4) and talk using EIGRP.
There are other servers in the top tier, some that also require load balancing, some that don’t. Typically, I want to load balance HTTPS requests from the internet, to one of the 3 servers in the top half.
I’m not sure what mode to select, routed, one arm? What about placement of the ACE? At the moment, I’ve just configured 1/1 on it and made it part of the MG MT VLAN, it's S VI exists on the S1/S2 switches, so I’m open to change as it's still all in the lab.
View 1 Replies
View Related
May 28, 2012
Currently migrating from a CSS to a new ACE for all our inbound ssl connections.
On the CSS, I could define multiple backend services, different tcp ports and 1 IP.
ex.
service TEST_HTTP22
protocol tcp
[code]....
But now I have to define each backend web server as an RSERVER and it doesnt allow me to configure 2 rservers with same IP.
View 11 Replies
View Related
Jan 1, 2013
I'm looking for a way to configure Cisco ACE4710 loadbalancer to bypass traffic that is initiated from server side to Internet?Are there any way to configure this, so that the loadbalancer will not maintain session for this bypass traffic to maximize throughput?
View 1 Replies
View Related
Apr 10, 2013
is there a possibility to get a load balancing across two rservers so: when client sends http://vip/ and it goes to rserver1 then url is sent without change when client sends http://vip/ and it goes to rserver2 then url is modified to http://vip/xyz/
Or maybe load balancing can be done across two serverfarms ?
View 3 Replies
View Related
Dec 5, 2012
CISCO 3945 Routers - Are the 3945 Router power supplies load balanced by default? We are trying to determine if our switch/server rack at our remote location has maxed out it's power load requirements. I just need to know if the 3945 power supplies load balance by default or if the redundant power supply is ON but not really providing the router with power and is just there incase the other power supply fails .
View 3 Replies
View Related
Aug 17, 2011
We have two Cisco ASA 5510 Firewalls at one site, and two non-Cisco firewalls at another. Both firewall pairs are configured for high availability (Active-Passive), and both have redundant links to the Internet via routers running HSRP. In the event that one of the Internet routers were to fail, we require the VPN to dynamically move from using the old path via the failed router to using the new router with minimal downtime.
I have been looking at using VPN load balancing to achieve this but the only configuration example I can find is for Cisco VPN Client url... Is it possible to define a static crypto map with the VIP of the load balanced group as the peer IP? So in the non-Cisco devices I will define the VIP of the load balanced group?
View 1 Replies
View Related
Sep 26, 2011
I just purchased 5 RV220W to act as internet/wireless router at a remote site. There is no VPN, just LAN and Wireless routing to the internet.I have setup remote management and it works fine when I am directly connected to the internet. However, everytime I try to connect through our HTTP/HTTPs proxy farm, it usually fails. Specificially, I get the log-in page and can log in. It starts to render the landing page but redirects to a page stating "Your session has been terminated." On rare instances the first page will appear, however within a few clicks I end up with the same terminated page.
As a test, I bypassed the farm and forced my browser to use one proxy exclusively. At that point I could access the HTTPS interface with no issue. I have not had any issues with other SSL sites with the proxy configuration in use.Is there some sort of MITM prevention I could be running into? If so, can it be turned off.I am new to the RV-series of routers. Is there any logging I could turn on that would provide insight on why the session may be getting terminated?
View 2 Replies
View Related
Jul 23, 2012
I put multiple rservers in multiple server farms?
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it? Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.
View 1 Replies
View Related
Mar 27, 2013
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies
View Related
Apr 10, 2012
Im planning to install a WAN Switch on our network basically this WAN switch will be the core WAN switch in our WAN segments where all WAN connections coming in and will use EBGP peering to every CE WAN router.
is Advanced BGP supporeted in WS-C3750X-24T-S?
View 5 Replies
View Related
Sep 19, 2011
I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
the client os is win7 64 bits, eplorer version is 7.
View 1 Replies
View Related
Apr 9, 2013
I have downloaded the WampServer, however it is indicating that one of MySQL's Apache didn't Active yet. So how to activate all of the WampServer's services.
View 1 Replies
View Related
Jan 31, 2012
win 2003 dhcp server. when I leave dhcp services OFF i can ping the server fine. once i turn ON dhcp services the connecting drops in and out.. what is going on here?
My users are unable to get a steady connection to the dhcp server.
View 8 Replies
View Related
Jan 15, 2013
I have A 3560x running 12.2(58)SE2 and jus tupgraded to IP services to allow Enhanced EIGRP as found on feature navigator. I need to run full EIGRP and disable Stub.
however, when I try to disable it, I get this error:
dist2-3560x(config-router)#do sho licenseIndex 1 Feature: ipservices Period left: Life time License Type: Permanent License State: Active, In Use License Priority: Medium License Count: Non-Counted
Index 2 Feature: ipbase Period left: 0 minute 0 second Index 3 Feature: lanbase Period left: Life time License Type: Permanent License State: Active, Not in Use License Priority: Medium License Count: Non-Counted
dist2-3560x(config-router)#no eigrp stub connected summaryEIGRP is restricted to stub configurations only on this platform.
I have installed the license and rebooted. by all indications th elicense is installed and should allow for Full EIGRP routing.
View 2 Replies
View Related
May 11, 2011
I have two CSS 11500 series.In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.
View 3 Replies
View Related
