We are looking to setup a guest WLAN, and I have a dedicated port connected to our backup cable modem. On our old 4400 WLC I had specific ports assigned to interfaces. We upgraded to a 5508, and for the life of me I cannot figure out where to do this. On the 5508, under interfaces, there is no option to list a port under Physical Information. Our 5508 is running 7.2.111.3 software.
View 2 RepliesHow many WLCs 5508 can you add to the mobility group?
View 1 Replies View RelatedOne of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
View 1 Replies View Relatedi was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.i have supressed this port mirroring.when i try to reconfigure a port mirroring from port FE17 to FE3. The SF200 web interface crash. the SF200 seems to reboot.
i have updated the SF200 firmware from V1.1.2.0 to V1.1.2.9.44 when i was able to configure (via SF200 web interface) a port mirroring from port FE17 to FE7.But after having suppressed this port mirroring again, i was not able to reconfigure a new port mirroring from port FE1 to FE3 (the SF200 hangs).
i have also tried to return to default factory setting but this does not solve the issue.i am working on SF200-24P
Currently the guest wireless users are maintained by WCS 7.0.172.0. I'm having a project to set up another 5508WLC in one location to replace the WLC in use in different location. My concern is regarding the guest user accounts. Can I use the feature of "Save Guest Accounts on Device" in WCS to save all the guest accounts on another WLC? I tried this feature and I got the message of "Successfully saved Guest users to the following respective controller(s) where they were applied". I don't know if it is because there is currently only one WLC in the WCS or the account can only be saved on the original controller where it was created.
View 1 Replies View RelatedWe have;
3 - 5508WLC
1 - 4402 WLC
Cisco Prime 1.3
25 - 3502i
We have 25 remote sites that use MPLS back to the company HQ that has one connection to the internet.Also at the HQ we have a seperate ISP connection.The remote sites and HQ have AP's which provide internal company access. We would like to have a seperate Guest WLAN at these remote sites to provide access to the ISP connection at the HQ's. Do we need to have an anchor controller? From documentation I have been reading it looks like anchor controllers are mostly used for networks that have a single connection to the internet and they use the FW to control/ secure the guest and company network from each other. Is there a differnt way of seperating the guest wireless and company wireless network securely from each other but use the same WLC's and AP's??
We are re-designing our wireless network and are navigating the security options.Are design will include a 5508 WLC and 3600 series APs. We plan on breaking our wireless out into four VLANS.Is 802.1x the standard for wireless authentication?What EAP flavor would you recommend for wireless? We will be supporting an environment with a variety of mobile devices (iPhone, iPad, HP tablets, Dell laptops, etc.). We will also be supporting wireless Cisco VoIP phones. Someone suggested choosing between EAP-Fast or EAP-PEAP, does this seem reasonable? Also, if we want to authenticate users using their AD account, we need to have NPS running on the AD server and use the radius protocol from client to server, is that right?
View 1 Replies View RelatedI have Cisco 3845 with two Gigabit interfaces configured as port-channel with sub interface and with QoS. However shape does not work.
[code]...
I have Cisco 3845 with two Gigabit interfaces configured as port-channel with subinterface and with QoS.However shape does not work, why? [code]
View 1 Replies View RelatedI am facing a strange issue with OSPF configuration. i have a server in DMZ and ports 22 & 9202 are opened. when some one does a telnet on port 22 it works and the same can be seen in sh ip cache flow command, but when we do a telnet on port 9202, the dest int is showing as NULL. i have OSFP & BGP configured on the same router and redistribution is also enabled.
MPLS Router (BGP & OSPF running) --> FW (DMZ int is configured, OSPF running) --> LAN (Inside, OSPF running).
when i execute sh ip ospf command on MPLS router, i couldnt see any route with Null interface. from MPLS router i am able to telnet on port 22 but not on 9202. also no packets hit my FW and the dest int shows as Null in sh ip cache flow command. but when i do a telnet on someother port, i can see the packets hitting my FW. why only traffic to that particular server on port 9202 is getting blcoked? also why the packets are hitting NULL interfcace when it desnt exists?
i have a adsl modem that is sending dhcp reqeust and i want to use that on my cisco switchs 3560 48 ports.i want to use the interface port 0/48 as a WAN connection and i want to use the other interfaceports for DCHP pool.i have an d-link (dir655) router at home and i want to have the same situation on my cisco switch my WAN interface get from a DHCP reqeust an ip adress from the provider like 10.10.123.44 (for the cisco switch would this interface port gig 0/48)then i want to configere my LAN as a DHCP pool like 192.168.0.1 (for the cisco switch would this interface port gig 0/1 - 47 .
View 3 Replies View Relatedwe have 100 Cisco 881 routers in our network and they all work fine to Linksys, 3Com, etc switches. The problem we have encountered is interfacing to Netgear switches. Netgear switches use autosensing on their ports and it does not seem to be compatible with MDIX autosensing on the Cisco 881 4 port LAN hub that is standard on the 881 router. Would a cross over cable resolve the problem? Since both run autosensing MDIX they never synch - so likely a cross over would not do much. I see this with all types of Netgear smartswitches. If you put a small switch between the Netgear switch and the 881 Cisco router everything works fine except for getting port 9000 traffic through.
View 5 Replies View RelatedI have a problem with System-defined Link Port Interface Utilization Poller. When I generate Interface Utilization Report, this one just displays few Interfaces (see the figure in my attachment). I checked the default poller for interface utilization and recognize that it just associate with few Interface (same as in Interface Utilization Report) instead all. I need to display the utilization of all interfaces in my report
Is Link Port Interface Utilization wrong or Is it necessary to creat user-defined poller that associate with all interfaces of devices?
I have 2 x 5508 Wireless Controllers, 1 mgmt port on each as standard. I noticied something different between these controllers running the same code.I can bound a physical port to the mgmt interface on one controller but not the other (both interfaces are untagged)see below, this config appears on one controller but not the other? Is this something to do with the initial setup? How can I add Phyiscal information to the other controller mgmt interface, I cannot delete the mgmt interface. Physical InformationPort Number Backup Port Active Port Enable Dynamic AP Management?
View 2 Replies View RelatedWe recently reset a 4400 controller in a school. Although all access points associated, clients could not get the Internet. On investigating we suddenly lost connection to the web interface. We tried hyperterminal connections to reset, but found that the managament interface had the ports "unconfigured". We finally reset the configuration, and when we tried to start from scratch it now does not allow a port designation. It asks for 1 or 0 but says both are invalid when entered.
View 2 Replies View RelatedI am facing port speed issue on WS-C2960G-48TC-L series switch.This switch gig0/X ports connected to onother switches (Cisco and HP both switches are also gigbit ports and directly connected ).but interface is giving only 100mb/s output.ios on WS-C2960G-48TC-L is 12.2(44)SE6
View 15 Replies View RelatedWe are looking for a solution that to use Sub-interface on a routed port on 6509, instead of using a SVI on it.Are there any different when using Sub-interface?
View 3 Replies View RelatedI have an 8.3(2) ASA with a single outside IP. Dynamic PAT translates inside addresses to the outside interface address. I would like to use static NAT with port translation to access an inside syslog server. I got an error when I tried using the outside interface address. Can I use both dynamic PAT and Port Translation with the same outside address?This is what I would like to use but I receive an error saying there is an overlap using the outside interface address.(192.168.1.0 is my inside network. 10.10.1.10 is the outside interface IP.)
object network inside-net
subnet 192.168.1.0 255.255.255.0
nat (inside, outside) dynamic interface
object network SYSLOG_SERVER
host 192.168.1.50
nat (inside,outside) static 10.10.1.10 service tcp ssh ssh
this is my first time configuring a cisco router. For instance, a cisco router 1700 with 2 ethernet WICs and 1 LAN port. We have 2 ISPs one more stable than the other. We use an RDP session to an external host identified by lets say IP address 200.1.1.2 using ISP2 to get to this computer. We use ISP1 for all the internet usage, web pages, youtube etc. We are thinking of using this cisco router 1700 to make the packet filtering and routing of this RDP session to the correct ISP2 since we only have 1 NIC per computer on the LAN side.
The main idea would be:
| YES -----> ----------- then use ISP2
LAN---------> Are the packets RDP ?
| No--------> ----------- then use ISP1
Does this can be achieved using packet filtering using extended ACLs and to be router from the lan interface to route rdp (port 3389) packets to ISP2 WAN interface?
Since WLC5508 MGMT interface is configured a AP-Mgr at the same time, can I set a Backup Port to WLC5508 MGMT interface? Refer to WLC configuration Guide:
In the Backup Port text box, enter the number of the backup port assigned to the management interface. If the primary port for the management interface fails, the interface automatically moves to the backup port.
Note Do not define a backup port for an AP-manager interface. Port redundancy is not supported for AP-manager interfaces. If the AP-manager interface fails, all of the access points connected to the controller through that interface are evenly distributed among the other configured AP-manager interfaces
if I need to configure the backup port for MGMT interface, i need to remove the AP-manager on MGMT interface and create a network dynamic interface for AP-Manager ?
how to configure the backup port for the management interface for a WLC 2112. I see in the documentation that it states:
"Each interface is mapped to at least one primary port, and some interfaces (management and dynamic) can be mapped to an optional secondary (or backup) port. If the primary port for an interface fails, the interface automatically moves to the backup port. In addition, multiple interfaces can be mapped to a single controller port."
But nowhere can I find where it says how exactly to do it. Google seaches have come up empty as well. I am connecting the WLC to a 3750 stack, and would like to have a secondary port from the WLC connected to the second node of the 3750 stack. So far I have connected port 1 (management) of the WLC to a port on node 1 of the stack which is configured as a trunk and everything is workign fine. I have also connected port 2 from the WLC to a port on node 2 in the stack that is configured the same as the port on node one. how to tell the WLC to use port 2 as the management backup if needed.
[URL]
Is it possible to allow certain websites to bypass the web authentication pages, so that they do not need to authenticate to get to our own website, but do have to if they wish to go anywhere else?Looking at a 5508 model at the moment
View 4 Replies View RelatedI´m a IOS CLI fanatic. Its the first tiem that I have to configure a SB switch. Its very confusing, I want setup a voice vlan id as 200. but I don see that this value change when I try to apply the smartport macro to the interface.Its possible change a smartport macro?
View 1 Replies View RelatedHere's my problem. I'm going to be using Cisco 1941 routers at a bunch of remote sites. All of these sites have 2 comm paths out. Some of them have 2 IP/VHF radios and some have 1 IP/VHF radio and a copper link using Patton ethernet extenders. From the VHF radios the data hit our MPLS network back to our HQ and the sites with copper go directly back to our HQ. Everything ends up at a Cisco 4948 switch. The problem I'm having is that I want the routers at the remote site to use one ethernet port (G0/0) as the primary and the other (G0/1) as the backup interface. I've tried the backup interface command but the problem is that depending on where an outage occurs the ethernet link to either the radio or Patton stays up so it never switches over. We're using OSPF as our routing protocol and I'm sure there's something that can be done with it but I'm not sure what.
View 4 Replies View Relateda Customer ask me to configure a etherchannel between two Switches C3500 XL Version IOS 12.0 follow the first configuration what I done and the output error show me by switch:
Sw01(conf)# interface port-channel 1 % invalid input detected at '^' marker.
I have to do something before add an new port-channel interface ?? why the Sw01 does not accept my configuration ?
we have cisco 6500 series switch and configured port channel on both switches with 2 gig interfaces on both switches.
When we enable the port channel mode to as desirable to the interfaces on both side and applied the port channel to physical interfaces switch will go down and if we remove on any one side switch will come up. we have enabled globally the following commands. [code]
I have 4 public IPs on Router 3845 interface FastEthernet 0/0/1. IP as below.
50.200.2.2
50.200.2.3 secondary
50.200.2.4 secondary
50.200.2.5 secondary
I wan to allow ports 80 to 90 on 50.200.2.3 for my webserver (192.168.10.50)
What are the pros and cons of configuring a Switch Virtual Interface (SVI) versus a routed physical port between layer 3 switches?For example, if I have two 4506s and have a need to run HSRP and route between them which feature is better and why?
switch_a
!
interface vlan 25
ip address 10.10.10.1 255.255.255.0
!
interface fa0/1
switchport mode trunk
[code].....
I have created 5 new 2 Gig port channels on a 6513 WS-X6516A-GBIC blade connecting to 5 4510R+E switches. 3 of the 5 Port-channels show up/up. 2 show down/down. However, for the 2 showing down, a duplicate Po interface was created with an "A" appended to the name that shows up/up. E.g:
Port-channel26 unassigned YES unset down down
Port-channel26A unassigned YES unset up up
Each of the 4510s has a second 2Gig PO to another 6513 with an identical config and all of those come up fine.
how to configure this. I did it in the past but kind of forgot how I did it.I have a stacked 3750 (two physical switches) connecting to a 2960.
I am creating trunk ports with limited access to VLAN 300, 600, and 700.
There is two interfaces connected from the 3750's(one on each physical stack member) to the 2960.I have the physical interfaces configured exactly the same.
3750 Config:
interface Port-channel2
!
interface FastEthernet1/0/46
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1, 300,600,700
switchport mode trunk
speed 100
[code]....
Should I keep the configuration on the physical ports and not configure the Port-Channel Interfaces? Do I need to configure port-channel load balancing? Is the channel-group mode sufficient? Goal is to basically create 2 links to the 2960 to double the bandwidth and provide redundancy.
how to enable protection path in GSR 12404 router Gigi interface connected to mux port. Like we configure APS group for POS interfaces.
View 1 Replies View RelatedHere is an example of what each switch logs when a server drops offline. Sample logs taken between 5:32am and 5:35am on Feb 20. This particular one was having problems all weekend. Switch #1 encountered over 2000 interface resets. The corresponding VPC port on Switch #2 only had 13 resets.
NEXUS SWITCH #1
2012 Feb 20 05:32:09 q91-sw01-5010 %ETH_PORT_CHANNEL-5-FOP_CHANGED: port-channel10: first operational port changed
from Ethernet1/10 to none
2012 Feb 20 05:32:09 q91-sw01-5010 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel10: Ethernet1/10 is down
2012 Feb 20 05:32:09 q91-sw01-5010 %ETH_PORT_CHANNEL-5-PORT_DOWN: port-channel10: port-channel10 is down
2012 Feb 20 05:32:09 q91-sw01-5010 %ETHPORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface port-channel10 is down (
No operational members)
[code].....
I have an ASA 5520 and I'm using Solar winds real time interface tool to monitor the through put of the port. It seems I can never get it to use more than 100mb, where should I check?
I have run a sh int giga 0/1 and it shows the port is 1000mb full duplex and the I have also checked the other end where it plugs into the LAN and this also says the port is running at 1000mb full duplex.