Cisco Firewall :: Connecting To ASA 5520 Using CCP
Jan 26, 2013
I'm using the Cisco ASA 5520 on GNS3 .. Everything is working fine, except for one thing. The CCP .. I tried the CCP with a router and it worked, but it can't see the firewall.
I have already enabled the HTTP server using "HTTP server enable" and created account using "username admin privilege 15 password admin" also enabled SSH and Telnet on the ASA
"ssh 0 0 INSIDE"
"telnet 0 0 INSIDE"
When I use the CMD to telnet to the ASA, it works just fine .. Also, when I connected a router to the ASA I could SSH to it, as well as using the PuTTy . Is there a way to troubleshoot? Or even a document that illustrates how to configure the ASA for CCP? Better a document for configuring the ASA from scratch .
View 7 Replies
ADVERTISEMENT
Sep 18, 2011
Since several weeks ago we are triyng to solve a disconnection problem related to servers benind an ASA 5520 behind this ASA there are:
-subnet with public ip addres
-sunbet with prive ip address, the server on this subnet are acccesible via NAT.the problem is worst when some ousite our network and behind a nat device (like a adsl modem/router) tries to connect to those servers wich are using natted ip behind the ASA.I tried from my home to connect to this ASA5520 using annyconnect and get reset tcp packets. Are there some aditional configuration to make the ASA work properly?. We have other firewalls like PIX or software firewall (ASG), they work with no problem. Only the ASA 5520 has this issue.
View 1 Replies
View Related
Sep 30, 2011
Connecting ASA 5520 to two Catalyst 3560G layer 3 switches. What's the best practice to connect the asa-5520 at the edge, to the core of my network? What I'm looking to do is connect two routed gigabit ports (gi0/2 and gi03) to two seperate layer 3 routed ports on catalyst 3560G. I'm wondering how to do it, or if there's any type of failover method? I'm running EIGRP in the network and the link to the first core switch has a /30 point to point connection. Everything works fine, I'm just not sure how to connect the second switch to the firewall. Should I use the a different /30 for the point to point connection to csw02 gi0/48? (See attachment) How would this affect traffic flowing through this interface? Would I have to duplicate rules I have on my inside (gi0/2) interface? Is there a way to make the inside2 interface standby some how? I want to know the best way to set this up, so in the event csw01 goes down I don't loose internet. Will EIGRP work it's magic and only use 1 path to the ASA? Should I even be using routed interfaces on the ASA and just use trunked mode?Running ASA 8.4?
View 1 Replies
View Related
Apr 18, 2011
I have ASA 5520 running ver 8.3.(2)8 and configured for AnyConnect VPN. While testing for iPads and iPhones we noticed that on connecting it disconnects few times before finally connecting. These are the messages logged in the ASA.I don't see authenticatio as an issue. Results are better with wifi compared to 3G. [Code]
View 1 Replies
View Related
Oct 9, 2012
I've got VPN connection from Cisco 877 to ASA 5520 and on the Cisco 877 I've got SIP device which doesn't has to go through VPN. I assume that for the best audio quality I should bypass the VPN and connect directly to the SIP servers, but how to configure it??
View 3 Replies
View Related
Nov 2, 2012
We were using ASA-5520-K9 with ASA-SSM-AIP-20-K9 but recently found some hardware problem in our running ASA. Now cisco want to replace with ASA-5520-K8.
View 1 Replies
View Related
Feb 8, 2011
I have setup an AnyConnect Connection Profile on my ASA 5520.
We have some remote support software which the helpdesk use to connect to PC's remotley and torubleshoot.
I cannot connect to this software using the assigned IP address of the client even though it works fine with our old Nortel VPN.
If I hit the IP address the packet gets all the way to the ASA and seems to disappear.
I have setup an IP v4 access list on the connection profile which allows any/any access b ut still no joy.
View 1 Replies
View Related
May 27, 2013
I have a multiple Offices in my location , all my external users are connecting my site using Cisco Client to site VPN and accessing my 2 sites , All users are able to access my 2nd office servers which are in 10.10.0.x pool , I have a different vlan in that same location with 10.10.35.x series and users are not able to access this pool servers , I am not much familiar with Routing . i am using ASA 5520 firewall .
View 11 Replies
View Related
Feb 27, 2013
I'd like to see some REAL LIFE comparisons of ASA firewall throughput (a bit like this one for ISR G2 Routers - [URL].
The reason I ask is that I recently upgraded a firewall from an ASA5505 to an ASA5520 on a small network where the only outside connectivity was a single 10meg Internet circuit with an IPSEC VPN (not landed on the firewall but on a router) to another site.
When I swapped out the firewall the users noticed a big improvement. The firewall is not doing anything out of the ordinary - no IPS or VPN, just standard state full inspection.
View 5 Replies
View Related
May 5, 2013
I have an asa 5520. How would I configure my dedicated management interface to be able to route off subnet while the firewall is in transparent mode?
View 1 Replies
View Related
Jul 26, 2012
We are using the newest release of AD Agent (1.0.0.32.1, built 598). The ASA Firewalls 5520 are having the software release 8.4(3)8 installed.When somebody tries to connect thru the Identity based firewalls from a citrix published desktop environment (PDI) the connection is not possible. Checking the ip-of-user mapping on the firewalls (show user-identity ip-of-user USERNAME) mostly doesn't show the mapping of the USERNAME and the PDI the user is logged in. The user-of-ip mapping of the PDIs IP-address shows mostly other users, which then are used to authenticate the acces thru the firewalls.
What is interesting, that on the AD Agent using "adacfg.exe cache list | find /i "USERNAME"" i can't see the PDIs IP-address neither because it is mapped to another user.Is Citrix Published Desktop environment supported to connect thru Identity based Firewalls? How AD Agent, Domain Controllers and Firewalls are working together? On the firewalls with "show user-identity ad-agent we see, the following:
-Authentication Port: udp/1645
-Accounting Port: udp/1646
-ASA Listening Port: udp/3799
Why Cisco does use 1645 and 1646 and not 1812 and 1813?The Listening Port is used for what purpose? we tried the AD Agent modes full- download and on-demand with the same effect.
View 17 Replies
View Related
Apr 15, 2013
I try to launch a LAND Attack against my firewall ASA 5520. Everything will work fine. But why, I think it should not work. I use a little tool where I can user a spoofed address, with a cluster shell and attack the firewall interface with the source of 127.0.0.1 ore the ip address of the interface as the source and destination. Then I get a cpu load of 89% with only two host. With IP tables I can use kernel processes to prevent this. But I don´t find anything for ASA.
View 1 Replies
View Related
Jan 4, 2012
Two different WAN links get connected to the firewall via two routers.(Different ip subnets).I need to get this two wan streams seperatly to the core switches.Core switches sits.Active/Stanby senario. If the Active core goes down Stndby Core will have take over the traffic. My design is correct ,if not what do i need to change. ASA is 5520.
View 8 Replies
View Related
May 22, 2013
I have ASA 5520 installed. I want to use ntp server for firewall clock setting. I found one open-access ntp server (stratum 2) in Los Angeles:
[URL] 209.151.225.100
Can I use the following command to set ntp server?
ntp server 209.151.225.100 source outside.
View 3 Replies
View Related
Jan 1, 2012
communication between 2 vlans.i have 2 vlans
Vlan 100
ip add 1.1.1.1
!
!
!
Vlan 200
ip add 2.2.2.2
i want to make communication between 2 vlans on firewall 5520 ASA 8.2.
View 1 Replies
View Related
Feb 27, 2011
I have a serious problem with my corporate firewall, witch is an ASA 5520, fv 8.3, with 8 +1 interfaces. It suddenly started to crash every 10/20 minutes and rebooting alone.
First of all I checked system resources witch are in a very low usage state. I also checked interfaces errors, but nothing strange come out o from error counters analysis. I tried disabling logging and all the service policy rules configured, but nothing changed.
Nothing changed and firewall continue restarting by itself.
Last logs I received before crash were:
%ASA-4-711004: Task ran for 35 m sec, Process = Dispatch Unit, PC = 84a619e, Call stack =
%ASA-4-711004: Task ran for 35 m sec, Process = Dispatch Unit, PC = 84a619e, Call stack = 0x084A619E 0x084A6512 0x084A70E1 0x084A7987 0x084A7AAA 0x08558B9B 0x08558E8A 0x083D3518 0x083CA145 0x080659D1 0x089196D9 0x08919790 0x089FF711 0x08A27468
Here the sh crash info command on module 0, after last reboot:
[Code] ......
View 12 Replies
View Related
Nov 29, 2011
we are having a firewall asa 5520 .we have connected the management port and inside port to internal network and dmz port to dmz network.now we need to configure tacacs and other management tool on dmz devices through management port. The problem is the management devices tacacs and other are placed in internal network.
View 2 Replies
View Related
Oct 4, 2012
I have an ASA 5520 in my company which does all our NAT and Firewall access control. Currently there is a rule in place to allow an incoming connection on port 2222 from a specific ip address to allow access to a web app our developers created. This is a test before the web app is released live. Now the web app can communicate with the specific address and port but the incoming connection on port 2222 isn't getting through. Everything looks great in the firewall but how can I log any hits this ACL takes to identify any potential problems?
View 2 Replies
View Related
Apr 8, 2011
Our Local Network is behind the CISCO ASA Firewall.Whenever we are accessing to Client VPN server,it is getting connected but after few Minutes (May be 5/10/30 Min),the sessions are terminating. The same traffic through PIX is no issue , only with ASA Firewall. See the following Error and request you give the possible root cause for this.
2011-04-09 16:15:09 Local4.Info 172.16.1.68 %ASA-6-302016: Tear down UDP connection 87447908 for OUTSIDE:68.22.26.66/4500 to inside:172.16.9.10/4410 duration 0:27:49 bytes 18653
View 1 Replies
View Related
May 29, 2012
I have problem in the configuration of Cisco ASA 5520, IOS version 8.4. The connection is as follows: LAN network--> Firewall --> Routers with GLBP with virtual ip address. the clients can not ping the virtual interface of the GLBP group, but I can ping it from the firewall, and I can ping the clients from the firewall, I checked the packet tracer it gives :
Phase: 7
Type: NAT
Subtype:
Result: DROP
Config:
nat (inside10,outside) source dynamic LAN interface
Additional Information:(code)
View 1 Replies
View Related
Oct 24, 2012
Need to know if ASA 5520 does Layer 7 firewall or not?
View 2 Replies
View Related
Jan 26, 2012
Two days ago, we changed our old 525 with asa 5520 ( ver 8.2 ). Configuration is the same, except the version. It even retains the same global interface and static public ip address as the old device.All worked well during that period.
Yesterday, one of the http applications , not tested other day, was found not to be working. To test, we switched back to the old 525 , however nothing was working when we did that.
View 5 Replies
View Related
Sep 27, 2011
We have configured 20 route in ASA 5520. The CPU usage goes to 100 % at the moment when we add a specific route.route inside 10.254.101.0 255. 255. 255.0 10.254.102.254 1.This is the same case when we add this route at the first cli or as the 10th cli or the 21 cli (errespective of the position of cli) There is an another route out of which 20 routes we have configured is route inside 10.254.103.0 255.255.255.0 10.254.102.254 1.The normal case if we dont add the problamatic route , then the CPU utilization is only 2 %.
View 1 Replies
View Related
Jun 20, 2011
Currently we have one ISP1 and all traffic goes to this way. Suppose our isp1 goes down, our outside user cant get the server. All servers are nated to this ISP1.We planned to purchase a another ISP2. Shall we Configure same inside server to map this ISP2? so that one primary ISP1 goes down it will take place the outside trafficISP2.
View 1 Replies
View Related
Aug 24, 2012
I am going with ASA 5520, know how many NAT translation is possible.
View 2 Replies
View Related
Jan 11, 2012
Can i buy a plus license for asa 5520??
View 2 Replies
View Related
Mar 19, 2013
On one of our firewalls we hosting a application/service which impacts clients and we recently conducted a Pen test, the external company doing the Pen test have advised us that there is a vulnerability relating to OpenSSL. We have checked the server and there is no OpenSSL installed so the only place where it could be picking this up is on the ASA, is this correct?Here is the report from the company that conducted the test:4.3 Network Security An outdated OpenSSL package was identified that was vulnerable to a heap corruption bug that may be exploited by an attacker to acquire command execution on the host, or to create denial of service conditions. Table 7 provides an overview of the risk identified per network assessment category, along with recommendations for resolving the issues identified. Category
Risk
Summary
Recommendations
Patch Management
High
The OpenSSL package installed on one host was identified as being outdated and subject to a heap corruption bug. Update the outdated / vulnerable OpenSSL package to the latest stable version. We have an ASA5520 and running the following version: Cisco Adaptive Security Appliance Software Version 8.2(5)2 How do we check the OpenSSL on the ASA and secondly do we need to update the ASA software version ?
View 3 Replies
View Related
Aug 5, 2011
I want to see log for write on ASA5520. who & when write lastly and who write before. How to see this log. In show vershon i see last modified date, but not log.
View 5 Replies
View Related
Jul 19, 2011
Is it possible to setup 2 x Cisco ASA 5520 that are in an Active/Standby failover using sla monitoring?
For example ASA1 outside interface connects to an upstream switch and you setup sla monitor with icmp echo to ping that switch. The switch goes down and you need the other ASA2 to become the Active ASA. Can the sla monitor be automatically integrated with the failover commands for this to happen?
View 5 Replies
View Related
Apr 8, 2012
We want to make an upgrade of one of our customers' ASA 5520 (with failover). They have version 8.2 now and we want to get the more stable newest one. Can we get an 8.6 version? or we need an ASA 5500X for that one?
View 2 Replies
View Related
May 3, 2012
I am currently getting DoS/DDoS on my asa 5520 , the attacker is hitting IP's that are not even open on any port. The attack is filling up the queues on the firewall which is at 99% CPU during the attack. here's the NetFlow info that I was able to get from my ISP ( since I dont have a Router to do that ). [code]
View 9 Replies
View Related
Feb 8, 2012
I am unable to ssh to the cisco firewall from outside. Though when i telnet on port 22, [code] When i do a putty session i get a blank screen.
View 9 Replies
View Related
Mar 12, 2013
Two days ago, we changed our old 525 with asa 5520 ( ver 8.2 ). Configuration is the same, except the version. It even retains the same global interface and static public ip address as the old device.All worked well during that period.Yesterday, one of the http applications , not tested other day, was found not to be working. To test, we switched back to the old 525 , however nothing was working when we did that.Does the static statement which actually does the translation for this application carry any arp problems or so.how can i check this problem.
View 3 Replies
View Related
