Cisco Firewall :: Nating Between Internet Clients To DVR Pix 515e
Sep 25, 2012
I have a DVR installed inside my network with local ip address 10.0.0.117/24 and i need to access it from the internet. there is a pix 515e (ios ver. 6.2) between the internet and my internal network. I've configured NAT from inside to outside to allow my internal clients to access the internet. but i need to allow external clients from the internet to access the DVR. I've tried to configure it on my pix but i found it doesn't have more options for nating like ASA.
is there any way to do that on pix and if so what the correct commands to do that.
View 6 Replies
ADVERTISEMENT
May 20, 2013
I have Pix firewall 515e on inside interface its has configured with IP 192.168.0.254.And Global Nating is configured.
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
I want i configured Global nating only for only specific IP address E.g 192.168.0.0-192.168.0.30 and 192.168.0.200-192.168.0.254?How i do this?
View 13 Replies
View Related
May 6, 2011
I have a PIX 515E that I want to use to as a border between my internet connection and my Cisco AIR1131AG. I have configured the PIX to have the outside interface as a dhcp client which gets its dynamic IP address from the cable modem. the AP is connected to the E1 inside interface. Now I could see the E1 interface from the arp table from the AP but I cannot ping it. From the firewall I don't see the ARP table from the firewall. and i cannot ping the AP. what is wrong with the configuration? side note, i am able to connect to the AIR1131AG from my laptop I was not able to retrieve an IP address.
FW1 - CONFIGURATION
interface Ethernet0 description uplink towards the techsavvy modem speed 100 nameif outside security-level 0 ip address dhcp setroute !interface Ethernet1 description >>> WIFI LAN ACCESS <<< nameif inside security-level 100 ip address 10.0.0.1 255.255.255.0
[Code].....
View 3 Replies
View Related
Aug 22, 2011
I need to redo the configuration on the new one?
View 11 Replies
View Related
Jan 25, 2012
I am trying to change the DNS server that my VPN gives to VPN clients on a Cisco PIX 515E. What command will change it from 10.6.0.2 to 10.6.0.4? The software version is 7.2(3)
View 3 Replies
View Related
Jul 6, 2011
in a week or two we are going to put in a secondary internet connection. Is there a way on a pix 515E to have one internet provider be preferred over the other and if the primary fails then the secondary will take over?
View 3 Replies
View Related
Oct 19, 2011
I have just received 4 static ip's from my isp, i want to be able to point these ip's at different services on my internal servers, for example: [code]. The firewall I have is Cisco PIX 515, how to set the NATing up or commands?
View 1 Replies
View Related
Jul 29, 2012
I am currently trying to apply a reverse NAT on asa 8.2 and not sure how to do this. I have done this on asdm 6.2 for asa 8.3 but the options are not simiar on 8.2. Is there a CLI equivelant?
I am trying to Achieve the object below for any traffic coming from outside interface to the inside interface with any source address to destination 10.X.X.58 then translate it so that it become 192.X.X.X to address 192.X.X.58. This is so that communications can traverse internal network as the server is not ona DMZ.
I have done this on 8.3 (shown below) but do not know if it is possible for 8.2, I have tried replicating the same command on 8.2 but commands are not recognised.
nat (outside,any) source static any 192.X.X.X destination static 10.X.X.X 192.X.X.58
Should I just upgrade to 8.3? never done it before so not sure of the consequences.
View 3 Replies
View Related
Jan 28, 2011
Problem with the PIX 525e while "NATING ".
View 3 Replies
View Related
Dec 22, 2012
i have asa901-k8.bin" in my asa firewall and downlaod liecnce from cisco,now i dont know how to allow internet to my user.?
View 1 Replies
View Related
Aug 15, 2011
CISCO ASA 5505
Interfaces:
OUTSIDE - 194.50.90.221 255.255.255.0 / security level 0
DMZ - 192.168.12.254 255.255.255.0 / security level 25
INSIDE - 192.168.0.6 255.255.255.0 / security level 50
Now, if I want to ping from the DMZ to INSIDE, I get an error message "no translation group found for icmp src DMZ: ...... dst: INSIDE...."
I fixed is by adding "NAT 0" onto the INSIDE interface so that packets originating from "INSIDE" that are destined for "DMZ" do not get NAT'd.
Now my question is, becasue these are all directly connected networks, how come the firewall does not route the packets, but tries to NAT them instead.
View 6 Replies
View Related
Jul 9, 2012
I have a Cisco ASA 5520 (Ver 8.2(4)) with all four interfaces in use (Public, Private, DMZ, Local offices) and an IPS module, so there are no spare interfaces. I have used all of Public IP's on the current interface for various services (these need one to one mapping, so I can't port map mainly due to SSL certificate issues) and I need to add another Public IP range. The secondary option on ASA interfaces does not exist as on routers/switches and I need to use an additional non contiguous IP address range for additional services advertised on the Public interface that are NAT'd to be servers in my DMZ.
I have seen an example of adding a static arp on the Private interface to allow a secondary gateway to be used for outbound traffic, but I need to allow 14 new IP addresses to be NAT'd from the Public to DMZ and possibly also for outbound NAT'ing (from either Private or DMZ to the Public). I have a L2 switch between the ISP router and the firewall, so using VLAN's is not an option unless the ISP can be persuaded (highly unlikey) to add the seondary IP's as a sub interface with tagging. Anyway if this was actioned then we would have a massive outage on our current IP range during the transistion.
View 3 Replies
View Related
Jun 3, 2012
I have an ASA5510 running version 8.2(5) I am having an issue with routing/natting from an internal network to the outside interface IP on port 443 which has a nat back in to another internal address. i works externally in from a public address. i also see log messages to do with IP Spoofing
View 1 Replies
View Related
Apr 11, 2011
I'm having trouble setting up local LAN (reach inside network when VPN connected) and Internet access (reach internet when VPN connected) for my VPN CLients when they are connected to my VPN, They can connect, no problem there, but I can't reach any resources when connected. My pings time out, both to my inside network and to public ip adresses, the only thing I'm able to ping is my ASA (172.16.30.1), and I don't se any routes under "Status/Statistics/Route Details" in my cisco VPN Client (when connected).
Here's my config
ASA Version 8.0(3) !hostname KardesASAdomain-name default.domain.invalidenable password XXXX encryptednames!interface Vlan1 nameif inside security-level 100 ip address 172.16.30.1 255.255.255.0 !interface Vlan10
[Code]....
View 14 Replies
View Related
Sep 27, 2012
i just installed a pix515e ( ios ver 6.2) in my network. and the vpn users can connect to it from the internet successfully but they aren't able to connect to any of the internal resources. some other informaion: i configured nating between the internal network (10.0.0.0/24) and the internet and another static nat policy between an internal resource through another public ip address on outside interface. but right now i need to let the vpn clients to connect to my internal resources.
View 5 Replies
View Related
Dec 18, 2012
it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.
View 1 Replies
View Related
Feb 21, 2012
it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.
View 1 Replies
View Related
Jun 13, 2012
I have an Pix 515E firewall with Pix724-33.bin IOS. I just want to know that does this IOS support SNMPV3 or I will have to upgarde it with some other version.
View 1 Replies
View Related
Jan 16, 2013
Ive got a problem with passing traffic through a Cisco 515e firewall.im trying to telnet to devices on the inside net, 172.16.x.x fom an outside net 10.x.x.x? ive configured a group called infrastructure and added the 10.x.x.x addresses.ive configured acl 101 inbound on the outside interface:
access-list 101 permit tcp object-group INFRASTRUCTURE any eq telnet
theres a route to the inside net:
inside 172.16.0.0 255.255.0.0 172.16.163.1
and theres a translation:
static (inside,outside) 10.4.4.34 10.4.4.34 netmask 255.255.255.255
when i try and connect, using a packet capture I can see traffic from 10.4.4.34 to the inside device 172.x.x.x on the inside interface but i cant see the traffic leave the outside interface ive used the same group infrastructure group before to connect to VM machines on the 172.x.x.x net on RDP and this wrks ok. access-list 101 permit tcp object-group INFRASTRUCTURE object-group VMs eq 3389
View 8 Replies
View Related
Nov 25, 2012
I am trying to set the PIX firewall to transparent mode.After I set it to transparent firewall, I allowed all icmp, tcp, udp traffics.Currently, any devices in the inside network can get the ip automatically from DHCP server in the outside network but cannot ping to any servers in the outside network either access the internet.Do I need additional confiration on the firewall?
Here's the configuration:
PIX Version 7.0(1)
firewall transparent
names
!
interface Ethernet0
[Code]....
View 1 Replies
View Related
Oct 6, 2012
I have the following network.2 WAN links termination on my PIX 515e and all internal users connected to third interface.
Problem I am facing is that I have assign manual IP to users with some have full access to Internet while others have limited.
The users are changing their IP address while others are offline and I want to restrict them.
The only way I can think off is by binding IP to MAC as e.g ( Active wall software). But can it be done on PIX 515e and if so how?
View 11 Replies
View Related
May 13, 2012
I have erased the Cisco image from my PIX 515E, and while i tried to load a new image its asking for activation key. I tried its old key. but no use.
View 1 Replies
View Related
Sep 5, 2012
I have a PIX 515 Ewhich does authentication for SSH via RADIUS protocol and fails over to the local database if radius server goes offline. But when the radius server comes back online, authentication still takes place through LOCAL and not the radius server. Following are the commands:
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
[Code].....
View 3 Replies
View Related
Dec 15, 2011
\I just configure my PIX 515E with version 7.0(4) and having problems to get traffic out on eth0 (if name outside). There is no problems between different VLAN ,all VLANs are configure on eth1. It is also possible to accass services on VLAN 10 (DMZ) from outside. The only thing I see in syslog is "Built Outbound" and "Teardown".
View 11 Replies
View Related
Dec 30, 2011
I have a Pix 515E running PixOS version 8.0.4 with two interfaces, inside and outside.On the inside interface, I have a Redhat Enterprise Linux 5.4 64 bits machine as an NFS server version 4 (NFSv4).On the outside interface, I have three (3) Redhat Enterprise Linux 5.4 64 bits as NFS clients.I am looking for the exact UDP and TCP ports to be added to the ACL in order to accomplish
View 1 Replies
View Related
May 15, 2012
I need ot upgrade a Cisco PIX 515 E to A Cisco ASA (not sure what type and modle yet!). the PIX currently has about 80 lines of ACLs and no VPNs. So only inside and outside interfaces and 80 lines of ACLs to be transferred over to the ASA.I was wondering if the ACLs can be transferred over to ASA as is?is there anything that I need ot watch for?
View 1 Replies
View Related
Jun 30, 2011
I have an issue in the Cisco PIx 515e series. The IOS is 6.1(2).I have set sepecific access-list to allow incoming traffic to inside interface. But still the TCP 3-way handshaking is dropped here. [code]
View 6 Replies
View Related
Oct 22, 2012
What would be the access-list entry to allow protocol 97? I am setting up foreign-anchor controller and need to allow protocol 97.
View 1 Replies
View Related
Oct 2, 2012
We just switched over from a T1 line to 50/4 Mbps cable Internet. The speed was fine with the T1, but when we switched over to cable, the download speeds didn't increase. I'm getting 2-3 Mbps up and still only 1.5 Mbps down. I inherited this network a few years ago, so I didn't configure the Pix initially but I have been managing it and can't find a setting limiting the bandwidth for the liffe of me. I know it's not the Internet because when I connect a computer straight to the modem, the speed is great. As soon as I put it through the Pix though, it slows way down.
View 8 Replies
View Related
Nov 30, 2011
I'm trying to use port redirection to allow outside access to a internal web server. As far as I can see, everything is configured properly. The Open Port Checker tool from yougotsingle.com says that the port (80) is open. However when I goto access it the connection times out. The external address is static from my ISP, and I will call it xxx.xxx.xxx.xxx. The server is at 10.1.1.20, and is functioning properly over the LAN.
View 7 Replies
View Related
Mar 29, 2011
I have Cisco PIX 515E for my Lab and can't recover the password. It is not connected to the network. I have configured server, address, gateway from the monitor mode and tftp not seeing my laptop. best way to reset or recover password.
View 7 Replies
View Related
May 21, 2012
I've been struggling to get ASDM (PDM) installed and running on my PIX 515e. The PIX IOS version is 7.2.4(30) The ASDM version I've copied to flash is 524.
I've followed the Cisco documentation verbatim, however I still cannot connect via the Java ASDM client or via http. When I try to connect via http, my PIX shows the following error: "tcp access denied by acl from..." I do not this this is a security (ACL) issue as I've tested after opening everything up and still no luck.
Here's my running config (w/ the relevant statements prepended with ">>>"):
show run
: Saved
:
[Code]....
View 14 Replies
View Related
Sep 18, 2011
I have the following Pix 515E Firewall, that has been working good for a few years. But suddenly, the Pix stop booting up. The only thing that is happening is the power and network traffic led flashes and the active led is off. So my question is that is this symptom a hardware or software problem and is it fixable with either new parts; or is my firewall dead. I suspect that it is a hardware problem since the active led doesn't light up. I cann't even enter the ROM Moniter mode.
View 7 Replies
View Related
