Cisco Firewall :: Connect Internet VPN Clients (on Pix515e) To Internal Resources
Sep 27, 2012
i just installed a pix515e ( ios ver 6.2) in my network. and the vpn users can connect to it from the internet successfully but they aren't able to connect to any of the internal resources. some other informaion: i configured nating between the internal network (10.0.0.0/24) and the internet and another static nat policy between an internal resource through another public ip address on outside interface. but right now i need to let the vpn clients to connect to my internal resources.
View 5 Replies
ADVERTISEMENT
Sep 15, 2011
I have a PIX515E. I need to create a vpn to my clients office. PIX is alerady having two VPN, among two one is a dynamic VPN to a dynamic IP of netgear router.
It has two gateway(public IP). Configuration in MH2001 is pretty simple. and i have completed it.I have also completed configuration in PIX using ASDM. But the VPN is not up till now.
[code]...
View 1 Replies
View Related
Jan 13, 2013
The infrastructure has PIX515E as the Firewall and few Web Servers and Database Servers inside. Is it possible to retreieve information regarding the bandwidth available at the outside interface of PIX (Internet link utilization ) utilized by each of the nodes seperately? I could use SNMP to get the overall data transfer at the Outside interface of PIX but isit possible to get utilization details of individual nodes ? Is Netflow an option ?
View 10 Replies
View Related
May 12, 2012
I have an ASA 5510 configured 3 interface Internet_AAPT, Internal_Network and Server_Network. The server network works fine as is able to connect to the internet and services like port 80 work from the internet in. But from the Internal_Network can only get to the server network but not internet (6May 13 201214:17:4030201310.153.111.21253663199.47.216.14880Built outbound TCP connection 42508 for Internet_AAPT:199.47.216.148/80 (199.47.216.148/80) to Server_Network:10.153.111.212/53663 (10.153.111.212/53663). The weird thing in logs i see a connection being made but for some reason its referring to the Server_Network interface? below is my current config...
ASA Version 8.2(5)
!
hostname ASA01
domain-name names
name 10.153.11.184 QNAP
name 10.153.11.192 exc2010
name 10.153.11.133 zeacom
[code]....
View 10 Replies
View Related
Dec 14, 2012
I have an intermittent issue happening on my company's firewall, and I'm at a loss as to how to troubleshoot further.
We recently made some changes to our network, which included moving an ASA 5505 from one location to another. In moving this we also connected it to a different switch. It used to hang off a Cisco 3560, and now it hangs off a ProCurve 5406zl.
The setup is that the ASA is connected on two ports to the HP, which is simply a layer 2 device sitting between the firewall and the uplink to our ISP. One port, e0/0, is the outside interface and is set to switchport access vlan 2. The second interface, e0/1, is set for vlan 1, also access mode. It has an IP of 10.0.0.2. The HP on the other end of that has an IP of 10.0.0.1. So outside VPN connections come through the HP to the ASA on e0/0, and back out the ASA on port e0/1 to reach devices on the internal network.
What happens is that when a user connects to the VPN, they can reach internal resources intermittently. For example, I tried to ping an internal server IP address (let's say 10.0.0.23) from my laptop, while on the VPN, and pings failed. However I could ping that IP from the ASA itself. Another example is that during one VPN connection I was unable to connect to an internal web server, but once I disconnected and connected ahain I could reach the server fine.
The intermittent nature of the problem made me think that it could be an ARP issue, that somehow the traffic is getting sent back out the wrong interface sometimes, hence the lack of communication. However when I did show switch mac-address | include mac address, using the base mac of the HP, I only saw the mac address of the HP on one interface, e0/1. That makes me think that things are working as they should. Although I guess maybe it should appear on both interfaces...? I don't know. How I can most effectively troubleshoot this? It seems like the symptoms are indicative of some kind of rookie mistake, but for the life of me I can't figure out what it is.
View 4 Replies
View Related
Aug 23, 2012
I have configured an ASA 5505 to connect a single internal network to internet, it is not working. I have attached the config
View 9 Replies
View Related
Mar 27, 2013
I have a PIX 515E UR which I would like to activate the VPN-3DES-AES license. I did find a link to register the license, but after following the link and logging into my old CCO account i found that as I didn't have access to anything, so couldn't complete the procedure.Is there any way that I can get the license activated? I bought the unit from a Cisco partner quite some time ago, but never needed the 3DES license. Now I do.
View 3 Replies
View Related
Jun 27, 2012
I need configuring a newly reinstated PIX515E with IOS 6.3 to test the configuration of a load balancer.I would like to setup with two Inside interfaces (or simply two interfaces) for testing. I just need it to pass traffic (basically HTTP and HTTPS) between these two interfaces without using NAT.The older IOS is causing me some problems. I don't have an outside interface configured for Internet access,but trying to connect via IP address does't work either. I may be able to configure a second DNS server for the 192.168.12.X network for testing purposes if needed. I even tried to set the default route to the Interface of the production ASA's inside interface (3.1), but that did not work either.
View 6 Replies
View Related
Feb 12, 2012
I just added a PIX515E to my lab (since this is a lab, if I need to change IP address, that is not a problem)....I thought I configured it right, but I am not able to ping any of my other routers/PCs.I have EIGRP on the other three routers, but not sure if I configured it right on the PIX.The diagram below shows my current network topology....(right now the PIX is connected vai Ethernet 1 to the switch, not the router itself) [code]
View 13 Replies
View Related
Aug 28, 2011
I just bought a used PIX515e. It is running version 8.0(3) and ASDM 6.1.5 Because I do not know the history of the unit, how can I tell if the image used came from cisco and not some download site? I guess I should've thought about this before buying it but hindsight is...you know. Worse case is that the person who had it before me dl the software that was infected with a backdoor or something else. I don't have a service contract so I'm kinda stuck.
Can I download the image from the firewall flash and compare a MD5SUM?
View 12 Replies
View Related
Feb 16, 2012
We are planning to upgrade the PIX515e (128 MB, 16 MB flash) adaptive software from 7.2(4) to 8.0.3(ED). In our environment the two PIXes are working in active-standby mode and experiencing high memory utilization.
1) What are the bug fixes(like memory leak fix) and new configuration options in the 8.0.3(ED)?
2) Is there any issues to upgrade 7.2 to 8.0.3(ED)?
3) Is the upgrade to new version software fix the memory utilization issue?
View 1 Replies
View Related
Sep 8, 2012
why the ethernet 3,4,5 is not licensed here ?
View 3 Replies
View Related
Mar 17, 2012
i wounder why i'm getting such log message whenever i'm trying to reach my remote site: No translation group found for tcp src outside XXXX dst dmz ZZZZ, i have a Cisco PIX515E firewall and that message is captured there, the traffic is going through a VPN tunnel (the VPN are up on both ends)
View 2 Replies
View Related
Jun 28, 2012
We have two PIX515E ( 6.3), one is Primary( Active) and second one is Standby. after configuration of Secondary Firewall as Standby. getting problem.
1. Configuration part everything is fine
2.we have done failover text also .
Aster Some time , we are not able see Standby Firewall its going down .
View 2 Replies
View Related
Nov 28, 2011
Quick question. I have a site - site tunnel that is up and running between a Pix 515E and a 3050 appliance.Tunnel is up and running but on the pix side I dont see traffic from a couple of subnets behind the inside interface.On the vpnallow access list there are no hits So I setup a capture on the inside interface to see if the packets is making it to the inside interface and nothing. There is some traffic making it thru the tunnel that would have to hit the inside int first and even that doesnt showup in the capture.
View 1 Replies
View Related
May 20, 2012
I am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
domain-name jkkcc.com
enable password DQucN59Njn0OjpJL encrypted
passwd DQucN59Njn0OjpJL encrypted(code)
View 1 Replies
View Related
May 20, 2012
I am trying to veiw my PIX515e via the ASDM, but I am unable to...Can you review my config and make sure I have everything setup the way it is supposed to?
PIX Version 8.0(4)32
!
hostname pixfirewall
[Code].....
View 3 Replies
View Related
Apr 26, 2011
We recently got a Cisco ASA 5510 Security Appliance and I have some general question.
We have 1 T1 internet connection, and we have 2 internal networks. These 2 internal networks currently hav access to the internet. I am having issues with the 2 internal networks being able to communicate with each other.
View 2 Replies
View Related
Feb 9, 2012
I have just purchased an ASA 5505 for my remote users to access our internal network. I have followed all the setup instructions I can find. I am able to establish a VPN connection using the Anyconnect client and can see some of my internal network. (Basically, only the subnet of the internal interface) However, I have several subnets inside my LAN which are routed by another switch inside my LAN. I have built in the correct static routes so that the ASA will send traffic to that intenal routing switch for any subnets not part of it's inside interface subnet. I can see and ping those subnets from the ASA itself but the AnyConnect clients cannot.
View 9 Replies
View Related
Jun 27, 2011
I have set up a remote access ipsec vpn on an asa 5520. I can connect, and ping internal ip addresses, however I cannot ping back out to the internet, nor can the internal network ping the vpn clients and dns resolution internal or external does not work. I am seeing nothing blocked in the logs on the asa.
View 3 Replies
View Related
Jul 18, 2011
I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1). I have converted the config so that it is ready for the ASA. I noticed the "boot system flash:" and "asdm image flash:" command references the old PIX files. Do I need to update these or will they be updated when the ASA reboots with the new config?
View 2 Replies
View Related
Dec 13, 2011
Purchased an 887 my my home office. ADSL ATM0 and Dialer get an address from my ISP, have tried to configure NAT but none of my clients can browse the internet. I can't ping outside the network but I can ping clients internally as my clients are connected via a switch, which is plugged in before the 887. I can get access to the router via the Command Line and CP Express and Config Pro seems to work.
Building configuration...
Current configuration : 8900 bytes
!
! Last configuration change at 12:47:16 NewYork Wed Dec 14 2011 by elrooko
[Code].....
View 11 Replies
View Related
Aug 1, 2012
After connecting via anyconnect client 2.5, I cannot access my internal network or internet. My Host is getting ip address of 10.2.2.1/24 & gw:10.2.2.2
Following is the config
ASA Version 8.2(5)
!
names
name 172.16.1.200 EOCVLAN198 description EOC VLAN 198
dns-guard
!
interface Ethernet0/0
description to EOCATT7200-G0/2
switchport access vlan 2
[code]....
View 5 Replies
View Related
Nov 8, 2011
Used a pair of ASA 5520s in HA to firewall the internet edge and to firewall traffic between internal security zones such as web and application layers? If so, is this best done using different security levels or contexts?
I'm thinking of using a routed context for securing the internet edge and then using seperate contexts for the web and application networks. Contexts will route via a L3 switch.
View 3 Replies
View Related
Sep 25, 2012
I have a DVR installed inside my network with local ip address 10.0.0.117/24 and i need to access it from the internet. there is a pix 515e (ios ver. 6.2) between the internet and my internal network. I've configured NAT from inside to outside to allow my internal clients to access the internet. but i need to allow external clients from the internet to access the DVR. I've tried to configure it on my pix but i found it doesn't have more options for nating like ASA.
is there any way to do that on pix and if so what the correct commands to do that.
View 6 Replies
View Related
Dec 23, 2011
Currently I have an ASA setup as a Firewall with 1 outside interface and 2 inside interfaces. Initially, the Guest interface was setup to receive DHCP from the ASA and everything was working. I'm adding router and a server for the guest interface and what I'm trying to accomplish now is the following: ASA 5505 > Airport Extreme with a public static IP (69.xx.xx.6), handling DHCP and NAT > Mac Server as DNS Server.Right now, when I connect to my Airport Extreme with any computer, I don't have internet. I don't understand what's wrong. My DNS Server has a reserved IP address: 192.168.226.2 and it's pointing to itself and forwarding the ISP DNS servers, the Airport Extreme is handling the DNS Server IP and the ISP DNS Server IP but I can't connect to the internet from the server. [code]
View 31 Replies
View Related
May 8, 2013
What is the best way to monitor an Internet Edge router from the Internal network behind the Firewall?We want to pull more information from the edge router like netflow. We can use SNMPv3 and ACLs to keep the router secure.
But I am looking for the best config to keep both the router and firewall as secure as possible while still allowing us to monitor performance and faults.I am running an ASA and a 2821.
View 2 Replies
View Related
Apr 11, 2011
I'm having trouble setting up local LAN (reach inside network when VPN connected) and Internet access (reach internet when VPN connected) for my VPN CLients when they are connected to my VPN, They can connect, no problem there, but I can't reach any resources when connected. My pings time out, both to my inside network and to public ip adresses, the only thing I'm able to ping is my ASA (172.16.30.1), and I don't se any routes under "Status/Statistics/Route Details" in my cisco VPN Client (when connected).
Here's my config
ASA Version 8.0(3) !hostname KardesASAdomain-name default.domain.invalidenable password XXXX encryptednames!interface Vlan1 nameif inside security-level 100 ip address 172.16.30.1 255.255.255.0 !interface Vlan10
[Code]....
View 14 Replies
View Related
Nov 12, 2011
I am getting to many teardown tcp connection for outside interface.
i want to block this ip using CISCO IPS or using A access-list in ASA 5520 .
View 3 Replies
View Related
Nov 22, 2012
I have a VPN server set up behind a home router in my apartment. I'm able to connect to it from other locations, and have verified that internet traffic is going thru the connection (ipchicken.com reports the IP address of the VPN network). But I can't seem to connect to other machines on the router subnet. For example, 192.168.1.1 connects me to the local gateway rather than my apartment router. Also, I can't connect to known good static IPs for other machines on the remote subnet, including the machine I'm VPN'd thru!
Note that in connection properties, the setting to 'use remote default gateway' is checked.
View 2 Replies
View Related
Sep 12, 2011
I have configure Cisco 5505 as layer 2 firewall mode. I have vendor machine connected to Cisco ASA 5505 on port 2 as VLAN2 inside then VLAN1 outside connected to my internal network on layer 2 cisco 2960 switch. This machine needs access only to LOGMEIN then block all internal/internet traffic.
vendor machine on vlan 2 inside >> Cisco ASA 5505 vlan1 outside >> layer2 switch >> internal LAN >> Cisco 5520 main FW >>> INTERNET
View 1 Replies
View Related
Dec 18, 2012
it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.
View 1 Replies
View Related
Feb 21, 2012
it is possible to create a Windows Active Directory group of users which I can use to permit access through the ASA (5520) firewall? I only can find vpn authentication with Radius but nog specific information about granting AD groups internet access via the ASA.
View 1 Replies
View Related
