i tried to import a IOS from a network device into the software repository but the job fails with the following line in the log:
sw-10-ed24#
sw-10-ed24#dir /all flash:
Directory of flash:/
[Code].....
The chosen protocol ist SCP and the option "Use SSH for software image upgrade and software image import through CLI(with fallback to TELNET)." is enabled.
I am currently experiencing a problem while trying to import multiple 4710 ACE Appliances into ANM. ANM version is 5.2 and ACE 4710 Appliances version is 5.1.2. The error message is the same for all Appliances (currently 14, more to be deployed this year, another 12 this year). The management class, policy-map and service policy are all in place.
View 1 Replies View RelatedI have multiple AAA Clients that I need to add. The way I manage the clients, I often make changes of moving IPs from one group to another. I require that all clients use "IP Ranges". I try import the following IPs (8.8.8.1;8.8.8.3;8.8.8.9-10;8.8.8.25) I need them all to be ranges, but what happens is after I import it, I then go to that AAA Client, it makes them all "IP Range(s) By Mask" and siplays it like this.
View 4 Replies View RelatedI would like to use the NCS 1.2 to monitor Juniper SRX 210 firewall. When I try to import the MIB File from NCS, which show "Error: Failed to load MIB File "mib-802" because it is not in the resource path.what I can upload the MIB File from Juniper. [code]
View 0 Replies View RelatedI have 8 2504 controllers and each needs to have a minimum of 20 MAC addresses added. I would rather not add them one at a time but I don't see any features that allow for an import. Any way to do the import?
View 2 Replies View RelatedDo you know the procedure of import SSL certificate from Godaddy to ASA 5510? attached is the drop-down list that I have to choose from.
View 5 Replies View RelatedCan I import a self signed certificate from a Cisco 871 router to a Cisco ASA 5505? The 5505 replaced the 871 and I have a VPN that goes to another company that we have a connect to. The device on the other end is a VPN concentrator ( I do not have access to modify this device without going through multiple channels.) I only need to mimic this device for the site to site VPN tunnel only. It appears that there are no pre-shared keys only a self signed certificate.
View 1 Replies View RelatedI'm trying the csv file import and getting some errors.
010-12-07 14:23:47: File Format Validation Completed2010-12-07 14:23:47: Import Started
2010-12-07 14:23:47: Record number: 1, Host 01-02-03-04-05-06: Import Failed2010-12-07 14:23:47: null Import process failed for unexpected reason: Unknown error has accurred.2010-12-07 14:23:47: Import Completed With errors
-------- Summary --------Total Number of Records Processed:1Number of Records Failed:1Number of Records Imported:1---------- End ----------Please refresh the table to see the changes.
On some other tries I get null field or missing fields.
It actually creates the host, but on editing it I get the following message:
An unexpected error has occurred. To continue your work, reselect the option in the left navigation bar.If you continue to receive the unexpected error message, close your browser and log in to ACS again.If you still receive the unexpected error message, contact your system administrator or technical assistance.
MACAddress:String(64):Required,description:String(1024),"enabled:Boolean(true,false):Required",HostIdentityGroup:String(256),VLAN:String(256):Required,attr-Expiration Date:Date(yyyy-Mmm-dd)01-02-03-04-05-06,AAATest,true,,Guest,2010-Dec-08
I have an SG200 switch and am trying to import a certificate signed by my own CA. I generate the CSR and sign it using Java's key tool with my own root cert. When I attempt to import the resulting cert, the switch blanks out the certificate text box and deletes all of my d name data (CN, etc) from the switch. What am I missing?
View 2 Replies View RelatedI'm currently in the process of the setting up a new wireless network and I want to test out our 7925 phones on it. When I try uploading the certificate to the phone it fails and I find the following error in the trace logs
[code]...
I created this certificate using using Windows Server 2003 and it is 2048 bits. This certificate works fine with my laptop but I'm unable to upload it to the phone. The app load currently on the phone is CP7925-MFG-D.8.LOADS. Are there any specific guidelines out there when creating a certificate for a Cisco 7925 phone?
I have 2 PIX 525, which one of them, step and active failover mode the other PIX 525, leaving this off, do not know what happened may have been a power outage, but in any case I can turn it back on? And the other question I have is if I can import a configuration that I have saved on my computer. i have the PIX device manager.
View 11 Replies View RelatedI am migrating WCS to PI 1.3. I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.but the demo license is only 100 unit, but my WCS has 300 license units.How can I import the wcs data to NCS? Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3.can I install the patch before i import the data from WCS?
View 2 Replies View RelatedI cannot import certificate from CA (Certificate Authority). When I attempt to install the certificate to CSACS SE 4.2, the following error occurs during installation: "Unsupported private key file format".
View 7 Replies View RelatedI was wondering if there was a way to import a large number of mac addresses into the MAC filtering of a Cisco WLC 4400. We recently purchased 150 new Mac laptops and I need to add them to the Mac filtering. I have 5 WLC's to do this to.I already have the MAC addresses and names in a spreadsheet.
View 3 Replies View Relatedon ACSv5.2...are there any limitations on the number of users that can be imported via CSV file...i.e. will the ACS handle 250,000 internal users for example?
View 1 Replies View RelatedI just got a new controller (5508).Is it wise to try to import my 2100 config into the new Hw our should I start from scratch?
View 4 Replies View RelatedWhen I tried to import the file, there are two lines there, One is Certificate file, the other is for "Private Key File".
My question for you is, is this the private key of CA? My understanding has always been that the private key stays in CA only, not going to any other devices.
I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?
I am trying to import a SSL certificate into this device - Cisco SPS2024 (FW: 1.0.6 ( date 30-Aug-2011 time 15:45:47 )) but without sucess. I have allready did this task on another models through CLI (Cisco SRW224G4 - through the lcli) or on Cisco SG300. I can create certificate request with:
switch(config)#crypto certificate 1 generate key-generate
switch#crypto certificate 1 request cn "sw.localdomain" or "..." ou "..." loc "..." st "..." cu "..."
and that last command gives me plaintext certification request that I will sign with my certification authority. to this time, everything is clear and perfect.
And now, I have signed certificate according generated certificate request and I want to import it. And now I am in stuck, because I have not found any useful command to do this action. For import certificate, I have found only following command:
switch# crypto certificate 1 import pkcs12 WORD
also I dont exactly understand this command because there is no parameter to specify any url from which will be fetched pkcs12 certificate... just WORD parameter as the pkcs12 passphrase. nothing like as on another switch models on which there is following command:
switch2(config)# crypto certificate 1 import <CR>
after executing the command line will waiting for pasting the signed certificate to console. And on SPS2024 there is no any similar command to doing this. So in final, I cannot import certificate signed by my certificate authority, I can just generate self signed certificate directly on device and use only this one
I have the following
WCS: Version 7.0.164.3 and WLC 5508 Software Version7.0.116.0 And cannot import it. I have 2 more WLC 5508 (same version) already imported in WCS with no issue. Have run debug on the DMZ WLC and can see the snmp request coming through when I try to import it. Firewall rules are fine, ran a tcpdump and the WLC returns snmp values back. snmp credentials and routing is fine, can ping both in both ways.
Always comes up with the following error.
IP Address TypeStatus 203.14.70.91Failed to add device to WCS Reason: Object not found in device
We have a Prime LMS and a Prime NCS instance running. At the moment, instead of having the 2 systems do device discovery independantly, I thought a good way to set things up would be for LMS to do all of the discovery, and then export the DCR from LMS into NCS.
Now doing this manually in a cinch, but I'd like to automate the process. LMS has some nice scripting features that allows me to easily use the 'dcrcli' script to export a CSV file of the all of devices and credentials, which can be put in a format that NCS can bulk import. I plan to do this on a regular basis using a cron entry.
What I can't seem to find is any documentation on how I might be able to achieve the import piece of the puzzle on the NCS box. Are there command line utilities as with LMS that would allow me to import devices, and put the scripting into a cron file to do on a regular basis?
if i can import an ASA 5550 8.2(5) in CSM version 3.3.1?
View 2 Replies View RelatedTrying to use the "File Operations" option to import hosts into ACS. I go through the wizard and click "Finish", the pop up goes blank and just hangs there. No errors are generated.
View 2 Replies View RelatedIn one week I need to import the config from my 4404 WLC to my new 5508, then I just want to change the mgnt IP address of the 5508 and then bring it into the same mobility group.How do I import the config when the 5508 is straight out of the box?
View 13 Replies View RelatedFor 3 years now, I've been using an NME-AIR-WLC25 controller with an ever-increasing number of AP's (reaching the 25 limit a few months ago). As part of a new construction project, I'm adding 5 more AP's onto my network. As a result, I purchased a 5508 controller with a 50AP license to get me started.
My question is simple-- is it possible to import the WLC25's configuration to the 5508? I have a feeling the answer is no, but I figure it can't hurt to ask, and if I'm lucky it will save me quite a bit of time configuring this new controller.
I am tasked to Configure an ACE 4700 for SLB. This has been done and working. Am also further tasked to create a secure communication between tha ACE and Exchange server. I need the breakdown of steps required to Import certificate from the exchange server, and how to verify that things are working.
View 3 Replies View Relatedhow to import route from global VRF to VRF on ASR9001? someone said this feature is coming in the 4.3.1 release, it is ture?
View 1 Replies View RelatedI have copied the config and vlan.dat files via tftp to the computer and want to import them to a replacement switch. Both switches are 2960 model. I get the config over fine but not sure how to get the vlan.dat file to the flash.
View 1 Replies View RelatedI am performing a deployment, in which i require clarity on the following. Our setup has DC and DR , in each site we have two devices for HA.We have received One SSL Certificate from Public CA, Kindly clarify the following doubts i have on thisIn Doc, i found Cert.pem and key.pem is required to generate the pair ,do i receive both Cert.pem and key.pem from the CA or we can generate key.pem from Cert.pem ?SSL Offloading is planned for the X application, and it is running in both DC and DR ( Considering each having their own Public IP address ) , do i need to have two different public certificates or a single certificate can i use in both DC and DR.Load Balancing IssueIs it possible to configure in ACE to access the service in Business hours and in non Business hours to display HTML page showing this is available only during these hours ?In DC we have Three Web Servers ( only in One physical server the service is active, other two are backup ), and these three servers are under cluster and shares one cluster IP , In ACE we have created the VIP and Pointed to only Cluster IP ( like pass through only ). The issue we face is if active web server is down, even then ACE is sending the traffic to that webserver only instead of sending it to the new Active web server. let us know if any solution is there to overcome this issue ?as per my understanding instead of giving cluster IP as real server IP we can issue the three physical servers. now i dont require load balancing between three servers instead require failover king like if first server is down then it should forward to Second server ?
View 4 Replies View Relatedbetween fields in import template file (add or update) for internal users is no column for expiration date ([URL]). This field is not defined also for export file.
My question is: (How) is it possible import new users (or update existing) into internal db with expiration date field?
Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.
View 1 Replies View Relatedwe need to be required to import MAC filter databse from Cisco Wireless LAN Controller (4400) to Cisco ACS Server (v4.2).
View 2 Replies View RelatedI need to redo the configuration on the new one?
View 11 Replies View Related