Cisco WAN :: ASR9001 / Import Route From Global VRF To VRF Table?
May 7, 2013how to import route from global VRF to VRF on ASR9001? someone said this feature is coming in the 4.3.1 release, it is ture?
View 1 Replies
ADVERTISEMENT
Cisco Security :: 1841 / VRF-Lite And Global Keyword In IP Route?
Sep 1, 2007I have a 1841 with 12.4(16) IOS.In my configuration I have to interfaces for internet access, without vrf:
interface ATM0/0/0
dsl operating-mode auto
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
[code]....
This two interfaces are in the global route table because there is no vrf indication. These are for internet access (a simple adsl connection) Then, I have this interface in VRF named "lan123"
interface FastEthernet0/1.23
encapsulation dot1Q 123
ip vrf forwarding lan123
ip address 192.168.143.254 255.255.255.0
ip nat enable
Now the issue.If I write:
ip route vrf lan123 0.0.0.0 0.0.0.0 Dialer0
this works and, with nat, internet works. The question is why this works without the "global" keyword? I'm going from the vrf named "lan123" routing table to global table without the using of "global" keyword.
If I try to use:
ip route vrf lan123 0.0.0.0 0.0.0.0 Dialer0 global
there is an error indication.
Cisco WAN :: 1921 - Route Table Error
Sep 30, 2012We have Cisco 1921 routers that a provider is using for MPLS. They have it configured so that all internet trafic is passed to an internal ip address that is our proxy server. However, they are pushing all of the routing rules down to the workstation which is causing the local route tables to grow to be massive in a very short time.
For example, the second I ping a website, the ip address is resolved and then the route is added for the source ip address with the default gateway of the proxy server.
Is this normal? I would have thought that all the rules would have been handled by the router and let it keep the table entries.
Cisco WAN :: 6509 OSPF Stays In Route Table
Apr 5, 2012I have an MPLS router that connects to the core network.This router distributes (per route maps) routes from OSPF into BGP and from BGP into OSPF.The OSPF Process conencts a 6509 to the 7206 MPLS router. There are some routes in the OSPF process that I have filtered out of the 6509. They do not show up inthe 6509 at all and this is the only way they can be getting into the 7206.Checking the 6509 database, this route is gone, but it stays in the 7206 until I clear the route manually. The result is the route still gets distributed into MPLS. [code]
One thing to note, there are two possible OSPF paths the route gets into OSPF, one of them, the route is filtered with distribute-list on the 6509, which means it is still in the database, so it is still in the 7206 database, and still get distributed into BGP on the 7206, correct?
Cisco WAN :: 6509 Filtering Out Default Route From Full Internet Routing Table
Sep 12, 2011I have a question about filtering incoming bgp route updates from an internet provider. This provider sends the full internet routing table and default route and on an incoming prefix-filter on the customer switch (C6509-sup720) the default route is only accepted.What happens on the 6509 switch when the BGP peer flaps?Does it need to process all the internet routing updates, and if yes probably it cannot handle all these updates?What happens with the CEF table, will the switch install the routes first?
View 4 Replies View RelatedLinksys Wireless Router :: WRTP54G Route Table - Broken Internet Access
May 2, 2011I know that WRTP54G is a voip device, but it is router as well and my problem is related to routing part.I cannot access public internet servers with IP in subnet 2.0.0.0 / 8 and 1.0.0.0 / 8. In the 2.0.0.0 / 8 subnet are some akamai cdn servers (yes, the fbcdn .After some time I've found, that routing table in wrtp54g contains also entries:
1.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless2.0.0.0 0.0.0.0 255.0.0.0 LAN&Wireless
which cannot be deleted. It looks like someone wanted to filter dark space when the router was developed.Is there any way, to get rid of it? I've restored to factory defaults, no change. Firmware version is 3.1.27.ETSI
Cisco WAN :: WS-SUP720-3B - 2 Full BGP Table - Maximum Routing Table?
Jan 16, 2013In datasheet of WS-SUP720-3B - link- was said that are only supported around 256K routes (fib?rib?).With this value I can't get 2 full bgp - that is around 850K ..
The supervisor is that control this or just memory ? I said this because I have a 7204-npe-g1 whith 2 fullrouting and 1G of and he are ok..
Cisco Firewall :: 5510 Trace-route / Antispoofing On Not Default Route
Jun 24, 2011I've enabled antispoof on all interfaces on asa 5510.If you start a traceroute to a network on the default route, everything works, since replies comes to an interface with route 0.0.0.0/0 defined.If you start a tracer route to a network that is NOT on the default route (let's assume coporate MPLS), you only get response from first carrier router, the other are discarded because of anti spoof violation.
I have ICMP inspection and icmp-error inspection enabled.
Cisco :: SRX 210 NCS 1.2 Import Third Party MIB File
Feb 21, 2013I would like to use the NCS 1.2 to monitor Juniper SRX 210 firewall. When I try to import the MIB File from NCS, which show "Error: Failed to load MIB File "mib-802" because it is not in the resource path.what I can upload the MIB File from Juniper. [code]
View 0 Replies View RelatedCisco Wireless :: MAC Import On AIR-CT2504-K9?
Aug 8, 2012I have 8 2504 controllers and each needs to have a minimum of 20 MAC addresses added. I would rather not add them one at a time but I don't see any features that allow for an import. Any way to do the import?
View 2 Replies View RelatedCisco VPN :: How To Import SSL Certificate To ASA 5510
Jun 3, 2012Do you know the procedure of import SSL certificate from Godaddy to ASA 5510? attached is the drop-down list that I have to choose from.
View 5 Replies View RelatedCisco VPN :: 871 - Import A Self Signed Certificate
Sep 27, 2012Can I import a self signed certificate from a Cisco 871 router to a Cisco ASA 5505? The 5505 replaced the 871 and I have a VPN that goes to another company that we have a connect to. The device on the other end is a VPN concentrator ( I do not have access to modify this device without going through multiple channels.) I only need to mimic this device for the site to site VPN tunnel only. It appears that there are no pre-shared keys only a self signed certificate.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Csv Import Fails
Dec 6, 2010I'm trying the csv file import and getting some errors.
010-12-07 14:23:47: File Format Validation Completed2010-12-07 14:23:47: Import Started
2010-12-07 14:23:47: Record number: 1, Host 01-02-03-04-05-06: Import Failed2010-12-07 14:23:47: null Import process failed for unexpected reason: Unknown error has accurred.2010-12-07 14:23:47: Import Completed With errors
-------- Summary --------Total Number of Records Processed:1Number of Records Failed:1Number of Records Imported:1---------- End ----------Please refresh the table to see the changes.
On some other tries I get null field or missing fields.
It actually creates the host, but on editing it I get the following message:
An unexpected error has occurred. To continue your work, reselect the option in the left navigation bar.If you continue to receive the unexpected error message, close your browser and log in to ACS again.If you still receive the unexpected error message, contact your system administrator or technical assistance.
MACAddress:String(64):Required,description:String(1024),"enabled:Boolean(true,false):Required",HostIdentityGroup:String(256),VLAN:String(256):Required,attr-Expiration Date:Date(yyyy-Mmm-dd)01-02-03-04-05-06,AAATest,true,,Guest,2010-Dec-08
Cisco :: RME 4.3.0 - Unable To Import IOS From Network
Sep 19, 2011i tried to import a IOS from a network device into the software repository but the job fails with the following line in the log:
sw-10-ed24#
sw-10-ed24#dir /all flash:
Directory of flash:/
[Code].....
The chosen protocol ist SCP and the option "Use SSH for software image upgrade and software image import through CLI(with fallback to TELNET)." is enabled.
Cisco Switches :: SG200 - SSL Import
Feb 16, 2013I have an SG200 switch and am trying to import a certificate signed by my own CA. I generate the CSR and sign it using Java's key tool with my own root cert. When I attempt to import the resulting cert, the switch blanks out the certificate text box and deletes all of my d name data (CN, etc) from the switch. What am I missing?
View 2 Replies View RelatedCisco :: Import Certificate Failed For 7925
Jul 24, 2011I'm currently in the process of the setting up a new wireless network and I want to test out our 7925 phones on it. When I try uploading the certificate to the phone it fails and I find the following error in the trace logs
[code]...
I created this certificate using using Windows Server 2003 and it is 2048 bits. This certificate works fine with my laptop but I'm unable to upload it to the phone. The app load currently on the phone is CP7925-MFG-D.8.LOADS. Are there any specific guidelines out there when creating a certificate for a Cisco 7925 phone?
Cisco Firewall :: PIX 525 / Failover And Import Configuration?
Mar 27, 2011I have 2 PIX 525, which one of them, step and active failover mode the other PIX 525, leaving this off, do not know what happened may have been a power outage, but in any case I can turn it back on? And the other question I have is if I can import a configuration that I have saved on my computer. i have the PIX device manager.
View 11 Replies View RelatedCisco :: PI 1.3 Can Install Patch Before Import Data From WCS
Apr 15, 2013I am migrating WCS to PI 1.3. I read from the guide that we need to migrate to NCS 1.1.1 first and we can get the demo license from Cisco.but the demo license is only 100 unit, but my WCS has 300 license units.How can I import the wcs data to NCS? Besides, I also read from the guide that I need to install patch in NCS before migrating the data to PI 1.3.can I install the patch before i import the data from WCS?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Cannot Import Certificate To CSACS SE 4.2
Mar 2, 2009I cannot import certificate from CA (Certificate Authority). When I attempt to install the certificate to CSACS SE 4.2, the following error occurs during installation: "Unsupported private key file format".
View 7 Replies View RelatedCisco Wireless :: 4400 Mac Filtering Import
Aug 2, 2012I was wondering if there was a way to import a large number of mac addresses into the MAC filtering of a Cisco WLC 4400. We recently purchased 150 new Mac laptops and I need to add them to the Mac filtering. I have 5 WLC's to do this to.I already have the MAC addresses and names in a spreadsheet.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS V5.2 - Any Limitations On Import Users
Mar 21, 2012on ACSv5.2...are there any limitations on the number of users that can be imported via CSV file...i.e. will the ACS handle 250,000 internal users for example?
View 1 Replies View RelatedCisco :: Can Import A Config From A 2100 Wlc Into A 5500 Wlc
Feb 14, 2012I just got a new controller (5508).Is it wise to try to import my 2100 config into the new Hw our should I start from scratch?
View 4 Replies View RelatedCisco AAA/Identity/Nac :: Import Server Certificates On ACS 5.2
Jan 10, 2012When I tried to import the file, there are two lines there, One is Certificate file, the other is for "Private Key File".
My question for you is, is this the private key of CA? My understanding has always been that the private key stays in CA only, not going to any other devices.
Cisco AAA/Identity/Nac :: Trying To Import VSAs Into ACS 1113 4.2
Mar 27, 2013I have some VSAs to import into my 1113 box, but I am stuck before I can even start :-( I have an accountActions.csv file containing some VSAs (this is just a test csv file.) I also have an FTP server that is accessible from the 1113 system.
When at the GUI for the 1113 I do System Configuration --> RDBMS Synchronization I get the RDBSM Synchronization Setup screen all right. I have entered all the parameters associated with the FTP server, and selected manual synchronization. The problem is that there are no entries in the AAA Servers window at the Synchronization Partners section at the bottom, and therefore I can't get the 1113 to retrieve my accountActions.csv file, an action that (I guess) is triggered by clicking on the Synchronize Now button.
I do have an AAA Server defined in the 1113. It's a RADIUS server called Self, not assigned to any NDG.I guess I do not understand this at all. I just want to import some external VSAs. Do I need to have an external AAA server to accomplish this? If not, how do I get my local Self server to appear in the list of synchronization partners?
Cisco Switches :: SPS2024 And SSL Certificate Import?
Feb 29, 2012I am trying to import a SSL certificate into this device - Cisco SPS2024 (FW: 1.0.6 ( date 30-Aug-2011 time 15:45:47 )) but without sucess. I have allready did this task on another models through CLI (Cisco SRW224G4 - through the lcli) or on Cisco SG300. I can create certificate request with:
switch(config)#crypto certificate 1 generate key-generate
switch#crypto certificate 1 request cn "sw.localdomain" or "..." ou "..." loc "..." st "..." cu "..."
and that last command gives me plaintext certification request that I will sign with my certification authority. to this time, everything is clear and perfect.
And now, I have signed certificate according generated certificate request and I want to import it. And now I am in stuck, because I have not found any useful command to do this action. For import certificate, I have found only following command:
switch# crypto certificate 1 import pkcs12 WORD
also I dont exactly understand this command because there is no parameter to specify any url from which will be fetched pkcs12 certificate... just WORD parameter as the pkcs12 passphrase. nothing like as on another switch models on which there is following command:
switch2(config)# crypto certificate 1 import <CR>
after executing the command line will waiting for pasting the signed certificate to console. And on SPS2024 there is no any similar command to doing this. So in final, I cannot import certificate signed by my certificate authority, I can just generate self signed certificate directly on device and use only this one
Cisco Application :: ANM 5.2 Unable To Import ACE 4710
Mar 14, 2013I am currently experiencing a problem while trying to import multiple 4710 ACE Appliances into ANM. ANM version is 5.2 and ACE 4710 Appliances version is 5.1.2. The error message is the same for all Appliances (currently 14, more to be deployed this year, another 12 this year). The management class, policy-map and service policy are all in place.
View 1 Replies View RelatedCisco :: 5508 - Import Guest Anchor WLC Into WCS
Jul 26, 2011I have the following
WCS: Version 7.0.164.3 and WLC 5508 Software Version7.0.116.0 And cannot import it. I have 2 more WLC 5508 (same version) already imported in WCS with no issue. Have run debug on the DMZ WLC and can see the snmp request coming through when I try to import it. Firewall rules are fine, ran a tcpdump and the WLC returns snmp values back. snmp credentials and routing is fine, can ping both in both ways.
Always comes up with the following error.
IP Address TypeStatus 203.14.70.91Failed to add device to WCS Reason: Object not found in device
Cisco :: Prime Infrastructure (NCS) V1.3 CLI Device Import?
Mar 26, 2013We have a Prime LMS and a Prime NCS instance running. At the moment, instead of having the 2 systems do device discovery independantly, I thought a good way to set things up would be for LMS to do all of the discovery, and then export the DCR from LMS into NCS.
Now doing this manually in a cinch, but I'd like to automate the process. LMS has some nice scripting features that allows me to easily use the 'dcrcli' script to export a CSV file of the all of devices and credentials, which can be put in a format that NCS can bulk import. I plan to do this on a regular basis using a cron entry.
What I can't seem to find is any documentation on how I might be able to achieve the import piece of the puzzle on the NCS box. Are there command line utilities as with LMS that would allow me to import devices, and put the scripting into a cron file to do on a regular basis?
Cisco Firewall :: Import ASA 5550 8.2 (5) In CSM Version 3.3.1?
Feb 14, 2012if i can import an ASA 5550 8.2(5) in CSM version 3.3.1?
View 2 Replies View RelatedAAA/Identity/Nac :: ACS 5.2 Import Internal Hosts?
May 17, 2011Trying to use the "File Operations" option to import hosts into ACS. I go through the wizard and click "Finish", the pop up goes blank and just hangs there. No errors are generated.
View 2 Replies View RelatedCisco WAN :: 1811 - Use Global Ip Inside LAN?
Oct 19, 2011i have cisco router 1811 , i make port forwarding for my mail server , so from outside i can access to the mail server via my mobile but inside lan i cannot because i use my global ip address at my mobile config .
View 12 Replies View RelatedCisco Firewall :: Global PAT With Static NAT On PIX 6.3
Jun 7, 2012I am having issues getting this to work. For email, I have mail.xxx.xxx DNS'd to 165.165.165.165. I want it to come in to 10.1.0.31. It needs to go out a cluster of 10.1.0.31, 10.1.0.34, or 10.101.201.31 but look like it came from the 165.165.165.165 address. I have set up static NAT for the inbound. I have set up the global PAT with an ACL group of the 10.xxx addresses. I have set this same method up on an ASA with no issues but it doesn't want to work on the PIX 6.3. What am I missing?
no fixup protocol smtp 25
object-group service NewExchange tcp
port-object eq https
port-object eq smtp
[Code] ....
Cisco Wireless :: How To Import Configuration From 4404WLC To WLC5508
Feb 3, 2012In one week I need to import the config from my 4404 WLC to my new 5508, then I just want to change the mgnt IP address of the 5508 and then bring it into the same mobility group.How do I import the config when the 5508 is straight out of the box?
View 13 Replies View Related