Cisco Routers :: Sa540 Ip Alias External Ip Showing Dedicated Wan
Jul 13, 2012
I'm trying to figure out why recipients of emails from my company show that the mail is coming from our dedicated wan ip instead of the ip alias setup thru the dedicated wan.The external ip address for the sa540, wan1 (no optional interface), is 82.134.79.122.The ip alias is 62.97.213.156 mail. unitec hsubsea. com resolves to 62.97.213.156 for external dns yet it is reporting as the 82.134.79.122 for some recipients.The mail server was never setup with the 82.134.79.122 ip so i don't think this is a dns cache issue.What issue in the SA540 would cause the system to show as mail coming from 82.134.79.122 instead of the ip alias 62.97.213.156?
View 0 Replies
ADVERTISEMENT
Oct 18, 2011
I installed a new SA540 and configured some NAT rules for my Exchange server. Everything worked fine untill I did a firmware upgrade.Now the NAT rules won't work on my dedicated WAN.On the Optional WAN (load balancing) the NAT rules work fine.
View 1 Replies
View Related
Aug 26, 2011
I have 3 subnets that I all want to have my RV220W (1.0.2.4) as the gateway. Where can I add an alias into the router so all three subnets and communicate with it?
View 1 Replies
View Related
Jul 16, 2012
We have a Cisco SA540. It has been an extremely reliable UTM router. Other than SSL VPN not working for Mac OSX, we are very pleased with the unit.We have a 3 year contract for IPS, a 3 year contract for Trend Micro Protectlink Web, and a 3 year contract for Small Business Support Service for the unit.Right now we are trying to setup the VIP functionality but it is not going very well. To sum it up in a few words, we cannot get the SA540 to prompt the SSL VPN users to enter the 6-digit access code.
We setup an account at Verisign and requested a trial for VIP. They promptly setup the trial account. Getting everything setup was a breeze. The Verisign website is very well documented. They even had specific instructions for Cisco SA500 Series routers!!! We were very impressed with Verisign's implemenation. We are able to get our SA540 to talk to Verisign (basically, when we activate or deactivate an SSL VPN VIP user in the SA540 web GUI, you can immediately see it enabling or disabling the user on the Verisign website... it is very cool).Unfortunately no matter what we do, we cannot get the SA540 to prompt the SSL VPN user to enter the one time 6-digit code. In this case, we are using Verisign's iPhone app called 'VIP Access'.
I called into the SBSC and talked to a guy. I felt really bad for him. He used WebEx to log into my desktop and I showed, and explained, to him how all of it worked (setting up VIP in the SA540 web GUI, as well as, and the Verisign website). He had no clue about Verisign, VIP, or the two-factor authentacation concept at all. I told him that he needed to escalate my case to the SA500 Series team, but of course he had to try. He was supposed to call me back yesterday or today. I am sure he is dreading calling me back as he probably still has no clue.
How to use the VIP functionality? Or how it works and set it up? We would like to at least get it to work before our 30-day trial period is up. I have a distinct feeling that the functionality used to work, but Cisco hasn't kept up the firmware with all the latest back-end API calls to Verisign or something similar.
View 4 Replies
View Related
Mar 1, 2012
We require UPnP (mainly for an in-house built FTP Server app that uses UPnP to dynamically open/close ports for Passive FTP mode) and have found it's implementation in the SA540 is unreliable. Sometimes UPnP works after a reboot, sometimes it doesn't. When it does work after a reboot it will eventually stop working. Going into the web GUI and turning UPnP off and back on always fixes for a while.
Is this a known issue with the SA500 Series routers? We had an RV220W deployed first, but it's UPnP implementation was even more unreliable. That said, it seems that the latest Beta firmware version for the RV220W has fixed the issue. Could it be that the same fix needs to be applied to the SA540?I was planning on opening a cause with the CSBC at some point like I did with the RV220W, but I'd rather not spent the time doing so if the this is a known issue.
View 1 Replies
View Related
Jan 26, 2012
Installing a SSL certificate from DigiCert on a SA540 router? The SSL certificate is a wildcard variant (*.example.com).
View 1 Replies
View Related
Jul 11, 2011
I want to build a "hub and spoke" topology for one of my clients. For the "HUB" , I'm planning to use an SA540, with a static public IP provided by a 4Mb SDSL. For the "spokes" (21 at the moment), I'm planning to use RV120. They will be behind a NAT, provided by a "SAGEM LIVEBOX", and a static public IP. The boss will connect to the HUB using Cisco VPN client, or quickVPN, and get access to all the spokes. Some spokes will have to connect to each other, via the HUB. I searched a long time on this forum and reading documentation, but I didn't find at the moment the answer to my question : is this topology suitable with the choosen hardwares ?
View 7 Replies
View Related
Apr 5, 2013
We have just purchased a license L-PL-GW-100MAX-3= Protect Link Gateway: Unlimited Web + 100 Max Email Seats,3YR. I found that it does not include IPS license. I cannot find anywhere where I can purchase an IPS license for SA540 gateway. It seems to be available only as a bundled product when purchasing the hardware.
View 1 Replies
View Related
May 21, 2012
Looking for routing with an SA540 router connecting to corporate VPN.We have an odd configuration that is beyond the scope of what I have configured previously with these devices..I am trying to configure the routing to the additional IP addresses listed for the HQ. The VPN tunnel between the .26.120.x and the .17.0.0 networks is built however it does not appear to be routing. The Cisco administrator at the HQ site says that they have "fully configured the routing" from all the listed IP addresses back through the VPN tunnel. The options I am unsure of for configuration of the SA540 router are: GW - I believe that I use the internal IP address of the 17.26.120.x router.Is this logical since the VPN tunnel. We are using NAT for the firewall internally.The existing 3 172.26.x.x VPN tunnels are live and working and fully routing between themselves.
View 2 Replies
View Related
Oct 23, 2012
I hope an easy question, in the WAN profile of our SA540 I have IP Aliases configured for a block of IP addresses we have. The active 2 IP addresses plugged into the actual RoadRunner modem respond fine to ping, the other three I have programmed to the WAN interface are not responding as I would think they should. Have I overlooked something? The "Block IP on WAN Interface" is disabled and pings back fine.
View 3 Replies
View Related
Sep 13, 2011
I went through the install procedure outlined in the ProtectLink Gateway install manual and i activated the ProtectLink Web product through Trend Micro (which shows up through their web site as a registered product to me). It still doesn't show up as installed on the SA540 (under Administration/License Management screen). When I try to activate the product again, it shows as "Already registered". Trend has no idea why it won't work. They said Cisco sold the license, so try their support.
View 1 Replies
View Related
Dec 30, 2011
Is it possible to re-route our Site 2 Site VPN over our Static Route (T1) if the WAN fails?
View 1 Replies
View Related
Dec 26, 2011
Is Anyconnect supported for SA540 I have installed in on my android phone however I keep getting error "Unable to process data received from secure gateway" when trying to connect. If anyconnect is supported on SA540 how do I get it working?
View 1 Replies
View Related
May 8, 2012
I have recently configured a pair of ACE 4710 appliances in a FT group. The ACE's are deployed in one-arm mode, using Source NAT, with all routing to and from being done by a pair of PIX firewalls.
My configuration does not include the use of an "alias" IP address on the data VLAN interface within each of my contexts.
My understanding is that the "alias" IP address is similar to a HSRP address and if the ACE is deployed in Routed mode the default gateway for the servers can be configured with the "alias" address so as this is always available even if a fail over occurs.
if this is a correct interpretation and of use of the "alias" IP address and if so whether it is required when using a one-arm mode topology?
View 3 Replies
View Related
Aug 17, 2011
As this is an ASA 5505, unlimited users, I must use arp alias to allow a secondary network.
Inside network: 10.200.31.0/24.Additional inside network: 10.200.12.0/24
Clients in both networks can reach internet, but they can't communicate with eachother. Hosts on the additional network can ping the ASA inside network IP, but nothing else. I get incomming hitcount for inside interface when 10.200.12.x tries to ping 10.200.31.x. In the error log, I see: [code]
View 7 Replies
View Related
May 14, 2012
net send command not working. Even after starting messenger. Error : The Message Alias could not be found on the network
View 3 Replies
View Related
Dec 26, 2011
I have a new E4200 (running FW 1.0.3) and connected a Seagate GoFlex 1TB drive to it. The drive is recognized fine by macs and PCs. However, I find random folders appearing in my mac finder as "alias" and hence innaccessiable. There are a bunch of them scattered in random areas. On Windows those items appar as an unrecongnized incon, a 4KB size and Type file with the "archive" option checked under File "Properties". On a mac they appear as kind "alias" with a 4KB size.I also didn't notice any particular oddities with the directory name (I.e no special chars). I tried renaming them and that didn't fix it.
View 3 Replies
View Related
May 15, 2013
I have a Cisco Small Business RV180 and I have several VPN users configured. IPsec between my home router (also an RV180) and work router (router in question) is working fine, several PPTP users working fine and 1 QVPN user that works as well. I set up another qvpn user and it didn't work. I went back into the router to check and make sure I hadn't goofed something up and saw that I had 8 lines, 1 and 2 were the QVPN users and 6 other PPTP users, however, the "pages" footer (for lack of a better word) only displays 1 -5 of 5 instead of the 1-8 of 8 I would expect it to show.I dumped the cfg file and opened it up, all 8 user configurations show up. One was my user account which showed negative numbers for the logon time, something like -1day -hours -minutes -sec, so I thought that that might be locking up the router or something so I deleted my PPTP account but it didn't allow the new user access. I deleted all PPTP accounts and no luck there either.I'm running firmware 1.0.2.6.
View 4 Replies
View Related
Jun 10, 2013
I logged into my RV220W to backup the config before we upgrade our network and for some reason the navigation bar is not showing on the left, all that is showing there is Change Password, which does nothing when I click on it. The links on the Getting Started page (i.e. Initial Settings-Configure WAN) do take me to the associated link but I can not get to any of the settings I need such as Administration etc.
View 4 Replies
View Related
Dec 29, 2012
We have done the site to site VPN between Fortinet and Cisco SA540. Everything is configured at both ends but the tunnel is not establised.
View 4 Replies
View Related
Mar 24, 2013
I have setup a new RV180 and it appears to be connected to the WAN, however, I cannot ping the external IP. In some of the documentation, there are references to default access rules, however, there does not appear to be any rules setup. What other settings need to be made to allow the firewall to be pinged on the WAN interface?
View 1 Replies
View Related
Apr 20, 2012
I have Cisco router RV082 and I need to set up in this way. There should be two sunb nets.. each should have it´s own DHCP and each sub net should work in different external IP.. (one Internet port a and second DMZ/internet port)
Is it possible to set up?
View 3 Replies
View Related
Dec 20, 2011
I have tried to establish a VPN-Connection from Ipad (via the Ipad built-in vpn-client) to a SA540.Unfortunately without any results. I get the message "Server is not responding". (A VPN Connection from a normal Software-Client running on W7 works fine).
View 0 Replies
View Related
Feb 12, 2012
A friend was over with his lap top, since then I'm getting "sam's pc network",instead of my network, I can't seem to disable it, nor can the other devices in the house connect to it, the default is Sam's....
View 1 Replies
View Related
Jan 17, 2011
I got a static ip from my isp. I set up my static ip manually through my linksy router. I need the static ip to connect to a private network for my new job but cant connect to that network. I went to whatsmyip and found that my old dynamic ip is still showing up externally, it looks like my ip4 is using the dynamic as a preferred. My question is do i need to manually change the network connection on my LAN and wireless connection under ipv4 to change it from automatically obtain TO use the following address and put in my static? And do I have to change the DNS also? I am on a home network with one desktop on vista home premium and laptop windows 7.
View 5 Replies
View Related
Feb 4, 2011
i formatted my pc but after that lan is not showing in network connections
View 1 Replies
View Related
Oct 20, 2011
On RV016 router WAN port 1 is showing Half duplex wen i check it in Port setup but when i check it on Port status its showing me as Half duplex, how can we force it to make it full duplex.
View 2 Replies
View Related
May 20, 2011
I want to know whether NAT loop back is possible with the RV220W router/firewall, or when can we expect a firmware update that addresses this?For terminology sake, what I mean is that I've got a rule that maps HTTP/S to 192.168.1.2. However, when accessing my external ip from an internal ip, I don't get routed to 192.168.1.2.
View 13 Replies
View Related
Jan 14, 2013
As a raw test it is handy for us to ping externally the WAN port of the SRP 527W. How we configure the SRP 527W to allow this? FYI we have the inbulit SRP firewall enabled.
View 2 Replies
View Related
May 2, 2012
I was very excited to read about the two factor authentication that Cisco and Verisign offer through the VIP and SA500 series routers. I purchased an SA540 a month and a half ago. I have been on the phone with support of both Cisco and Verisign ever since. It appears no one actually knows how to make the product work. Finally I was told that they have only tested it on an SA520. So I bought an SA520; however, it doesn't work either. How to use the Verisign VIP two factor authentication with either an SA520 or SA540? If so, what is the trick? If not, how is Cisco advertising this product if it doesn't actually work?
View 3 Replies
View Related
Jul 10, 2012
We are using the cisco sa540 router and shrew VPN to connect to our buiness network, mostly to connect to the workstations with RDP. Now we wonder if it posible that the connection will disconnect automaticly after an idle time of for example 30 minutes. And if so, how can i configure it?
View 4 Replies
View Related
Dec 6, 2011
In asus router model rt-n10, there is a client list when you bring up 192.168.1.1 showing names of devices also mac addresses and ip addresses. How do I add names to the list so I know which devices are using what ip etc. I have tried the advanced settings in the router to see if I can do it this way , but no luck.
View 1 Replies
View Related
Dec 5, 2012
I was having problems connecting to one of my usb devices that was plugged into my router. I unplugged the router to reset it and whenever it starts up it flashes green and the green light goes solid for less then a minute before turning red. It's a solid red light. I've tried unplugging everything and restarting it and nothing. Ironically it still lets me connect to the internet but when I access the control panel on my computer it shows as disconnected. Is this means my router is busted. This is my second Belkin Router and the only reason I had to replace the last one is because it was a G+Mimi router and I upgraded to an N Router.
View 3 Replies
View Related
