Cisco Security :: ACS 4.2 Any Option To Tackle Encrypted Password
Mar 28, 2011
Our campus using WisM (WS-SVC-WISM-1-K9) as wireless controller , Cisco 1130 access point and Cisco Secure ACS 4.2 Solution Engine 1113 Appliance as radius server. For username and password, ACS will export the data from Oracle database (production DB). The problem that we are facing right now is password that store in oracle database is in encrypted format. Base feedback from our database administrator, the encryption is done by oracle - application layer and cannot be decrypt back. In Oracle they call it "Oracle Stored Procedures"
My questions :
1- Can Cisco Secure ACS 4.2 work with Oracle 10G or 11G?
2- Is there any option to tackle the encrypted password? Can ACS handle the "Oracle Stored Procedures" function?
View 2 Replies
ADVERTISEMENT
Sep 19, 2011
I am actualy trying to make a remote access VPN between a ISR1921 and Windows 7 pro. I already managed to put a PPTP VPN with an authentication against our LDAP databse via radius. But our password are in SHA1 in our LDAP, so I had to let the password unencrypted on the network using pap and this is bad.If I don't use pap, it simply doesn't work since all the other method need unencrypted password for the challenge authentication.Does that mean that every remote access VPN keep our password unencrypted ? Maybe use EAP (but I can't find a howto or good documentation about it)? Can I add a certificate or something?
View 1 Replies
View Related
Aug 1, 2011
Does there are plans to include support AES256-CTR (vice AES256-CBC) in IOS code?
View 2 Replies
View Related
Dec 16, 2011
we have some unusual issue when our core 3825 series router dealing with NAT !first off to offload traffic we have two router one 3825 and other 2821 configured to support GLBP .
interface GigabitEthernet0/0
ip address a.b.c.d 255.255.255.0
ip nat outside
ip virtual-reassembly
[Code]....
The problem is router hangs out , intenet users suffer slowness , criticle service like telnet doesnt work . the only solution i found is a reload ,not to mention this is core router sitting on campus network edge . and servicing around 1000 users !! approx assuming all users have using internet at same time .
how to check , if memory is not sufficient ?further if any users using utorrent or any thing like that , does it make enormous no of connections form same pc ?
is their any licence requird for IOS IPS ?i prefer to turn this feature on to kill torrents connections ? but i fear crashing of router as no of users are huge !any know bug with glbp , nat with ip voice image C3825-IPVOICE-M VERSION 12.4(24) T4 ???
View 3 Replies
View Related
Jan 1, 2010
I purchased a Cisco 851 router from ebay a few weeks ago that has the "no service password-recovery" option enabled. I've tried every "break" option i could find, and this thing does not seem to let me get in. I asked the seller for the password, and they refused (though i cant even get to a prompt to enter a password) or ROMMON. The unit comes up and reports its trying to connect to "Translating "stipp.srv.hcvlny.cv.net"...domain server" once it comes up, and thats it. [code]
View 34 Replies
View Related
Feb 6, 2013
I have 3 ASA 5510s; two of which are in production and the 3rd one is new. I inherited the two in production and was trying to configure that 3rd one using some of the existing object-group network statements. The problem is that when I try to create a range of IPs in one of the object-groups; the range command is not available. Here is one of the statements extracted from one of the production ASAs: object network REMOTE range 62.77.130.14 62.77.130.208.Both ASAs have the same image ver (asa842-k8). Is there something that I am missing to be able to enable the range option on the new ASA?
View 2 Replies
View Related
Jun 10, 2012
How can I get the security key password for my iPad?
View 2 Replies
View Related
Mar 7, 2011
I bought a @139.00 Kindle and cannot get it onto my WiFi. Kindle tech support asked for a 20 digit WEP key password for my Airport router(we use Macs).
View 2 Replies
View Related
Jun 20, 2012
I would like to set internet security pass ward
View 1 Replies
View Related
Sep 2, 2012
trying to reset my security password- and same problem as listed- tried using admin for admin and password for password at 192.168.1.1, but seem to have locked myself out.
View 1 Replies
View Related
Dec 5, 2011
I know my security key & password but want to change it. OS XP
View 1 Replies
View Related
Feb 18, 2013
Password recovery switch 2960 that what I am doing and I get fail sll the time?
switch: flash_initInitializing Flash...flashfs[0]: 0 files, 1 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 32514048flashfs[0]: Bytes used: 1024flashfs[0]: Bytes available: 32513024flashfs[0]: flashfs fsck took 9 seconds....done Initializing Flash.Boot Sector Filesystem (bs) installed, fsid: 3Setting console baud rate to 9600.(code)
View 6 Replies
View Related
Sep 23, 2011
I reloaded XP on an old laptop I have, a Toshiba Satellite, and it works fine. Problem is when I try to connect to my wireless network, it comes up as being security protected...and it isn't...and never has been. I have other computers connecting just fine, but I can't seem to figure this one out. I don't have a key to enter as there isn't one! I installed a USB wireless adapter, and it works fine, but I don't want to use the adapter on the laptop.
View 6 Replies
View Related
Apr 21, 2012
my home broadband connection is not secure. everyone can access
View 1 Replies
View Related
Jun 22, 2011
How do I find my wifi password for my qwest account to use on my IPOD?
View 2 Replies
View Related
Aug 3, 2012
Im stuck working on a moderm, its a speed touch 536 (old school) i cannot get past a password.. Im trying to set this bad girl up with a router, setting up routers in my specialty.Im trying to bridge the modern but on the setup page there is a password, i dont know if its factory or what.. ive tried many of common passwords for networking like (admin/admin, Admin/ Admin, Admin/Password) ive tried everything i can think of. so i need a way to bypass the security. Flashing the software maybe?Ive found a software uploader for it, but i cant find the original firmware for the modern.
View 3 Replies
View Related
Nov 22, 2011
i have lost my sky wifi security password and i was wondering if i can get an instant reply and talk to a person and not a computer about how i can get my wifi password.On the router ther is a sticker with all these codes on it and none of them seem to work at all when i type them in on my other laptops and computers
View 1 Replies
View Related
Aug 28, 2011
Want to change network name and password
View 9 Replies
View Related
Apr 3, 2011
I would like to give selected friends and family access through Wi-fi to our home network (Vista windows) however I cannot or do not have the network security id written down anywhere and it is blocked from my viewing when I go to the Control Panel, Network Security page "Network Security Key". How might I reset this security password? And if I do, is this the password a friend would use to gain access to my network?
View 2 Replies
View Related
Nov 1, 2012
need to know how to setup a security password for my router?
View 1 Replies
View Related
Mar 8, 2012
I have a desktop computer & a router setup for my old laptop. Ijust purchased a tablet & must sign on with my pasword but I don't remember it.
View 1 Replies
View Related
Nov 16, 2012
How can I know the password of a wireless network I'm not connected to. When I CLICK on the connect automatically,I got asked for a security key.
View 1 Replies
View Related
Nov 8, 2012
How to crack internet security password
View 5 Replies
View Related
Oct 12, 2012
How can we check when we connect using VPN client software if traffic is getting encrypted ?
View 7 Replies
View Related
May 13, 2012
Is it possible to configure an IPSEC GRE tunnel with RIP on an SRP527w? I see RIP, GRE & IPSEC are all possible.. But I'm not sure about them all together securing the GRE tunnel??
I basically want to do this with the SRW routers not native IOS. Single head end hub & spoke.
View 1 Replies
View Related
May 26, 2012
I've configured an ASA5505 to be Lan to Lan VPN tunnel endpoint, peering with a linux box. The ASA is full licensed so that side isn't an issue.PROBLEM:When the tunnel is initialised from the linux box everything comes up okay except the ASA isn't encapsulation any packets. It is decrypted the packets received from the Linux box okay but no return traffic is being encrypted.When the tunnel is initialised from the ASA, nothing happens.After some troubleshooting I've found that the ACL defining interesting traffic nor the ACL defining NO_NAT aren't being hit at all.
ACL for NO_NAT:
access-list NO_NAT line 1 remark ACL USED TO DEFINE WHAT TRAFFIC NOT TO NAT OVER THE VPN
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER object-group LINUX-BOXES 0xc736d5fb
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER 10.11.228.0 255.255.255.0 (hitcnt=0)
[code]....
I've checked with the administrator of the linux box and the definition for interesting traffic is exactly the same (except in reverse as should be the case).The firewall is doing other things like NATs and such like too but those NATs have nothing to do with this VPN. The setup is a LAN to LAN connection with no natting in between.The main parts of the config are attached, i've deleted things that should have a bearing on this however if you think it necessary i can sanitise the config and re-post. I think it will be working fine as long as the traffic hits those ACLs, however they're not and I'm unsure why.At this time i'm not seeing anything at all when doing an debug cry ipsec or debug cry isa. The ACL's aren't being hit so i'm guessing it's not even trying to form the VPN as it can't see any traffic that constitutes being 'interesting'.
View 4 Replies
View Related
Sep 14, 2011
I have
MLS : C6509-E
SUP : VS-S720-10G
PFC : VS-F6K-PFC3CXL
I'm trying to find out what is its limitation for encrypted traffic via SVTI there .
I don't have a SPA for the ip sec .
View 2 Replies
View Related
Mar 13, 2012
How WEP cracking works. I have a much better understanding now but it seems whatever programs I download and however close I get I always hit a wall somewhere. I am using windows 7 64 bit and my network adapters/cards are Broadcom 802.11n Network Adapter and Broadcom Netlink(TM) Gigabit Ethernet. I am not sure if these are adequate. I was using Commlink and aircrack but not sure if they are compatible and which versions i should have installed. I got as far as the collecting packets stage but the packets that appeared said ENCRYPT which was not correct and then my computer went to blue screen adn shut down and I had to system restore.
View 1 Replies
View Related
Mar 4, 2012
The only way we can use our Motorola router is unencrypted. I have gone into the router numerous times and reset it, unplugged it, retyped the WEP key, tried to shift to WPA and nothing works. None of three computers in the house will connect unless all encryption is off. We live in a good neighborhood on a cul de sac, don't get a lot of traffic through here, and know the immediate neighbors, but nothing is stopping a stranger with a laptop from sitting on the street and using our wifi. I've talked to the Comcast tech. The trouble just seems to be our boxes won't get past the WEP encryption stage.
View 8 Replies
View Related
Aug 21, 2011
I have XP running on this older laptop for my kids.I wish to connect this laptop wireless (WPA2 encrypted) with the internet AND with other hardware in my home (other pc, harddisk, mediaplayer, printer).I know it can be done in windows 7, and Microsoft also had a virtual WiFi research project for a WEP encrypted visual WiFi.But as said I need a WPA2 encrypted virtual WiFi for a laptop running XP.
View 14 Replies
View Related
May 24, 2010
I've noticed, that ACS 5.1 is writing .gpg archives for backups. I'm about to upgrade an evaluation system and the Installation and Upgrade Guide tells me to do a full backup and restore in order to upgrade an eval to a production system. [URL] (second note in section "Evaluating ACS 5.1)
Question: can the production system sucessfully decrypt the backup? According to my personal gpg it is CAST5 encrypted with one passphrase. Is this passphrase constant for all ACS 5.x?
View 1 Replies
View Related
Nov 23, 2011
Is there a way to get the password from one laptop, so I can enter it in the other one. I thought there was a way to make it visible, but I can't remember.
View 2 Replies
View Related
Jul 15, 2011
i cant find my wifi password on my computer.
View 2 Replies
View Related
