Cisco VPN :: ISR1921 PPTP VPN With Encrypted Password
Sep 19, 2011
I am actualy trying to make a remote access VPN between a ISR1921 and Windows 7 pro. I already managed to put a PPTP VPN with an authentication against our LDAP databse via radius. But our password are in SHA1 in our LDAP, so I had to let the password unencrypted on the network using pap and this is bad.If I don't use pap, it simply doesn't work since all the other method need unencrypted password for the challenge authentication.Does that mean that every remote access VPN keep our password unencrypted ? Maybe use EAP (but I can't find a howto or good documentation about it)? Can I add a certificate or something?
View 1 Replies
ADVERTISEMENT
Mar 28, 2011
Our campus using WisM (WS-SVC-WISM-1-K9) as wireless controller , Cisco 1130 access point and Cisco Secure ACS 4.2 Solution Engine 1113 Appliance as radius server. For username and password, ACS will export the data from Oracle database (production DB). The problem that we are facing right now is password that store in oracle database is in encrypted format. Base feedback from our database administrator, the encryption is done by oracle - application layer and cannot be decrypt back. In Oracle they call it "Oracle Stored Procedures"
My questions :
1- Can Cisco Secure ACS 4.2 work with Oracle 10G or 11G?
2- Is there any option to tackle the encrypted password? Can ACS handle the "Oracle Stored Procedures" function?
View 2 Replies
View Related
Nov 7, 2011
I'm actualy trying to bring two IPSec VPN on only one interface. I've successfully created a tunnel between Par and Barcelone and between Par and Mad. But I can't create it between Barcelone et Mad. We have a cisco ISR1921 in Mad and Barcelone, and a Netgear in Par.
Barcelone config:
crypto isakmp policy 10
encr 3des
authentication pre-share
[Code].....
View 7 Replies
View Related
May 15, 2006
Can I configure a PIX (515), as PPTP client to establish a tunnel with non-Cisco PPTP server ? Can my PIX initiate this type of connection ?Today, I use a PC with PPTP client to establish this and I want replace this with a PIX and I don´t want depends of a PC.
View 5 Replies
View Related
Sep 23, 2011
I reloaded XP on an old laptop I have, a Toshiba Satellite, and it works fine. Problem is when I try to connect to my wireless network, it comes up as being security protected...and it isn't...and never has been. I have other computers connecting just fine, but I can't seem to figure this one out. I don't have a key to enter as there isn't one! I installed a USB wireless adapter, and it works fine, but I don't want to use the adapter on the laptop.
View 6 Replies
View Related
Oct 12, 2012
How can we check when we connect using VPN client software if traffic is getting encrypted ?
View 7 Replies
View Related
May 13, 2012
Is it possible to configure an IPSEC GRE tunnel with RIP on an SRP527w? I see RIP, GRE & IPSEC are all possible.. But I'm not sure about them all together securing the GRE tunnel??
I basically want to do this with the SRW routers not native IOS. Single head end hub & spoke.
View 1 Replies
View Related
May 26, 2012
I've configured an ASA5505 to be Lan to Lan VPN tunnel endpoint, peering with a linux box. The ASA is full licensed so that side isn't an issue.PROBLEM:When the tunnel is initialised from the linux box everything comes up okay except the ASA isn't encapsulation any packets. It is decrypted the packets received from the Linux box okay but no return traffic is being encrypted.When the tunnel is initialised from the ASA, nothing happens.After some troubleshooting I've found that the ACL defining interesting traffic nor the ACL defining NO_NAT aren't being hit at all.
ACL for NO_NAT:
access-list NO_NAT line 1 remark ACL USED TO DEFINE WHAT TRAFFIC NOT TO NAT OVER THE VPN
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER object-group LINUX-BOXES 0xc736d5fb
access-list NO_NAT line 2 extended permit ip host PAMS_SERVER 10.11.228.0 255.255.255.0 (hitcnt=0)
[code]....
I've checked with the administrator of the linux box and the definition for interesting traffic is exactly the same (except in reverse as should be the case).The firewall is doing other things like NATs and such like too but those NATs have nothing to do with this VPN. The setup is a LAN to LAN connection with no natting in between.The main parts of the config are attached, i've deleted things that should have a bearing on this however if you think it necessary i can sanitise the config and re-post. I think it will be working fine as long as the traffic hits those ACLs, however they're not and I'm unsure why.At this time i'm not seeing anything at all when doing an debug cry ipsec or debug cry isa. The ACL's aren't being hit so i'm guessing it's not even trying to form the VPN as it can't see any traffic that constitutes being 'interesting'.
View 4 Replies
View Related
Sep 14, 2011
I have
MLS : C6509-E
SUP : VS-S720-10G
PFC : VS-F6K-PFC3CXL
I'm trying to find out what is its limitation for encrypted traffic via SVTI there .
I don't have a SPA for the ip sec .
View 2 Replies
View Related
Mar 13, 2012
How WEP cracking works. I have a much better understanding now but it seems whatever programs I download and however close I get I always hit a wall somewhere. I am using windows 7 64 bit and my network adapters/cards are Broadcom 802.11n Network Adapter and Broadcom Netlink(TM) Gigabit Ethernet. I am not sure if these are adequate. I was using Commlink and aircrack but not sure if they are compatible and which versions i should have installed. I got as far as the collecting packets stage but the packets that appeared said ENCRYPT which was not correct and then my computer went to blue screen adn shut down and I had to system restore.
View 1 Replies
View Related
Mar 4, 2012
The only way we can use our Motorola router is unencrypted. I have gone into the router numerous times and reset it, unplugged it, retyped the WEP key, tried to shift to WPA and nothing works. None of three computers in the house will connect unless all encryption is off. We live in a good neighborhood on a cul de sac, don't get a lot of traffic through here, and know the immediate neighbors, but nothing is stopping a stranger with a laptop from sitting on the street and using our wifi. I've talked to the Comcast tech. The trouble just seems to be our boxes won't get past the WEP encryption stage.
View 8 Replies
View Related
Aug 21, 2011
I have XP running on this older laptop for my kids.I wish to connect this laptop wireless (WPA2 encrypted) with the internet AND with other hardware in my home (other pc, harddisk, mediaplayer, printer).I know it can be done in windows 7, and Microsoft also had a virtual WiFi research project for a WEP encrypted visual WiFi.But as said I need a WPA2 encrypted virtual WiFi for a laptop running XP.
View 14 Replies
View Related
May 24, 2010
I've noticed, that ACS 5.1 is writing .gpg archives for backups. I'm about to upgrade an evaluation system and the Installation and Upgrade Guide tells me to do a full backup and restore in order to upgrade an eval to a production system. [URL] (second note in section "Evaluating ACS 5.1)
Question: can the production system sucessfully decrypt the backup? According to my personal gpg it is CAST5 encrypted with one passphrase. Is this passphrase constant for all ACS 5.x?
View 1 Replies
View Related
Jun 24, 2011
Got to set up a site to site VPN to one in a clients office and we're struggling to get Phase 2 working, just seems to loop around saying "Received encrypted packet with no matching SA, dropping" which to me means the ACLs arent mirrored correctly?
View 3 Replies
View Related
Mar 14, 2012
are the connections between the ACS and external identity stores encrypted?I know that when setting up LDAP identity store there is the option to specify SSL conection. Are the other connections encrypted by default, or is the data sent between the ACS and AD, for example, sent in the clear?
View 3 Replies
View Related
Dec 1, 2012
Packet Sniffing is mainly used on non-switched networks to display data that was supposed to be sent to nodes other than yourself, allowing you to see information such as usernames and passwords etc.My question is, why can this technology not be used as easily on a switched network? When nodes send data through a switch does it become encrypted?
View 6 Replies
View Related
Jan 13, 2012
This is a 5-year-oldish Gateway MX-6124 laptop running under Win XP 2002, SP3. I'm using SureWest DSL, with an ISP-supplied ComTrend NexusLink 5631 Modem/Router. The router is set up as a Secure Network, using WPA encryption. The laptop wireless operation light toggles off/on correctly using Fn-F2 control keys.I can connect to an open or non-secured wireless router, & have verified that at my church, at the Public Library, and at Starbucks. However, I cannot successfully connect to a passworded secured wireless source. I tried to use a secured network connection at my church yesterday, and could not connect. It "tries & tries" and eventually gives up and displays a cannot-connect type of message.
The laptop has worked correctly for several years on my home wireless network. It only stopped working about 3 or 4 weeks ago. I cannot recall changing anything in setup; I probably did it accidentally.I've spent about 2 hours in a couple of sessions with SureWest tech support. They diagnosed router setup using direct connect to the router, plus they talked me through several attempts at configuring the wireless config setup on the laptop. Everything I reported to them on the config settings appeared to be just fine. They also deduced that the wireless config on the desktop & router was correct.SureWest techs finally concluded that something was wrong with my laptop software config or the hardware, disabling it from making a encrypted connection. That sounds right to me, now having witnessed the secured connection failure described above, at my church wireless site.
I've looked at all the refs & things I can think of, plus followed step-by-step directions a couple of times with the SureWest techs. They rightfully pointed out that they could not make a tech support repair call on what did not appear to be a SureWest-related problem.I can easily make screenshots of any config screens needed on the laptop & upload to this forum.
View 5 Replies
View Related
Sep 12, 2011
The design is typical Cisco unified wireless solution. In such a implementation, is the traffic from the guest user who has successfully authenticated via WEB-AUTH encrypted? If so, what is the standard used, AES128 or TKIP?
View 6 Replies
View Related
Feb 13, 2012
In my company we put a RV042 router to connect two links to internet, but we have problem to enter a bank. The solution they gave us was to disable encrypted session balancing but I don´t know how to do it.
View 2 Replies
View Related
Jun 16, 2011
I installed a 1941 router with an encrypted GRE tunnel yesterday. The router has ipbasek9 and securiyk9 licensed. Initially the router was running the image c1900-universalk9-mz.SPA.150-1.M5.bin and was working fine. The tunnel was up and passing traffic. I then upgraded the IOS to c1900- universal k9-mz.SPA.151-2.T2.bin and when I reloaded the router the tunnel was stuck in a reset/down state. I tried doing shut/no shut on the interface and reloading the router again, no change. Being under some time pressure to get the device back into production I rolled back to the previous IOS image and the tunnel worked fine again. Is there a known bug that causes this behavior? I have searched cisco.com but have not found one. [code]
View 1 Replies
View Related
Nov 30, 2012
I have a new Inspiron 7520 and having issues with connecting to my secure network. In trying to troubleshoot the issue, I've discovered I can connect to my network when the connection is unsecured. When its encrypted, my connection is only limited (no IP address assign). I've also downloaded and installed the latest drivers with no resolution to my issue.
PC and Network Specifics:
PC - Inspiron 7520Wireless Router = Netgear N600 - model WNDR3700Wireless Network - 2.4GHz b/g/n, WPA2-PSK [AES]
System - Windows 8, 64-bitWindows IP Configuration
[Code]......
View 3 Replies
View Related
Oct 14, 2012
if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
View 1 Replies
View Related
Dec 20, 2010
i have a user in LAN which needs access to remote PPTP server. My router uses NAT NVI for some reasons to provide internet access.
Problem is what tcp/1723 is NATed successfully and it appears what GRE traffic is NATed as well, but GRE packets are NOT passed back to user on LAN.
Config is that simple:
interface Fas4
ip address x.x.x.x x.x.x.x
ip nat enable
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat enable
ip access-list extended nat_clients
permit ip 10.0.0.0 0.0.0.255 any
ip nat source list nat_clients interface Fas4(code)
View 2 Replies
View Related
Dec 15, 2011
an RVS4000 shall establish a pptp VPN connection. The router is connected trough its WAN port to the first router which connects to the internet.
The PPTP VPN connection cannot be established but the pptp server can be pinged from the VPN router. Login data and password is OK. Connection can be established from a win7 computer without any problem.
View 3 Replies
View Related
Jul 2, 2011
I have a Cisco 877 router and I configured it to act as a VPN server, supporting both PPTP and L2TP VPNs. I can succesfully connect to it from Windows computers using the built-in VPN software.There is only one problem: when using a PPTP VPN, encryption doesn't work. If I configure the client to require encryption (default setting), the connection fails with an error about the remote endpoint not supporting it. If I remove the encryption requirement, the connection succeeds. I've also tried tweaking the encryption settings (40/128 bits), but this didn't work either. [code]
The router's IOS version is 15, and it fully supports encryption. The strangest thing is, encryption is actually required in the router config; but not only the router doesn't seem to offer it... it also accepts unencrypted connections, which it shouldn't. It's like the ppp encrypt mppe auto required command is completely ignored.
View 2 Replies
View Related
May 22, 2012
I'm trying to set up a permanent VPN connection for an Expat. We've got an RV042 set up on site to act as the server, and an RVL200 as a client. This RVL200 will be behind a home router, so it needs to initiate the connection every time; the site side router won't be able to see it behind the Expat's home router.I've got a PPTP server set up on the RV042, and I'm trying to get the RVL200 to connect to it as a client. Is there any way to do so, or will we need to go with another option? Because on the RV042, I see no way to set up an SSL server of any kind; only a direct SSL Tunnel, which won't work as again, the RV042 will not be able to see the RVL200.
View 1 Replies
View Related
Mar 6, 2011
We have a Cisco 891 with this configuration belowI got several computer on my lan that needs to connect to an external Windows server with pptp. The windows server is not mine but it works. The clients are using the windows connection manager. We can connect to the windows pptp server for hours sometimes.But, sometimes we can just connect about 3-4-5 minutes, and it auto-disconnects. Is there something wrong in my configuration ? I heard the cisco router is messing with the keepalive or the connection state.It seems to happens when i have more than 5-6 clients connected at the same time on the same server. I got theses mesages : Link to VPN failed. OR ERROR 619 OR ERROR 651Before, I had a RV042 and it worked like a charm. We were 10 on the vpn server and it was working. I dont see why Its not working now.
version 15.0no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryptionservice sequence-numbers!hostname Quantis891!boot-start-markerboot-end-marker!!aaa new-model!!aaa authentication login local_authen localaaa authorization exec local_author local !!!!!aaa session-id common!!!clock timezone PCTime -5clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00!!!no ip source-route!!ip dhcp excluded-address 10.10.10.1ip dhcp excluded-address 10.1.1.201 10.1.1.254!
[Code] .....
View 2 Replies
View Related
Jul 6, 2012
I recently obtained a 2901 router running 15.2(2)T to replace my old 877 which was running 15.1(4)M1. The 2901 is humming along quite nicely but I have had difficulty configuring one feature which was working fine on the 877. The router needs to be a PPTP client to a hosted VPN service. On the 877, I had it configured like this: [code] I then had a dialer interface to actually set up the connection, and some PBR to control what went over the VPN. All well and good, and it worked fine. But on the 2901, when I try to configure the same thing, there is no such command as "protocol pptp" -- the only option is protocol l2tp.Was PPTP support deprecated somwhere between 15.1 and 15.2, or does the 2901 itself not support it for some reason? Obviously I understand that l2tp is superior to pptp, but at the moment this is my only option.
View 2 Replies
View Related
Mar 9, 2012
I am trying to configure a Cisco 871 to act as a PPTP VPN server on my home network. I have referenced Cisco's documentation regarding this which I will include below as well as a copy of my current running configuration and terminal monitor information from when I attempt to establish a connection.
When I attempt to connect from a Windows machine I receive the following error: 'Error 807: The network connection between your computer and the VPN server was interrupted.' 'The remote device won't accept the connection.'When I attempt to connect VIA my mobile, I get 'The server has hung up'.The 871 does detect the incoming connection which can be seen from the terminal monitor output: url...
View 2 Replies
View Related
May 19, 2012
Looks like cisco 857w does not support pptp client in my IOS version, only l2tp is supported. Does there is some IOS version I can upgrade/downgrade to configure cisco as pptp client?
View 1 Replies
View Related
Jul 19, 2012
I set up a PPTP VPN with an RV220W recently. It was working flawlessly until a recent power outage and now users are getting the 807 error when attempting to connect. I have PPTP passthrough enabled and TCP/UDP 1723 open. As far as I can tell GRE 47 is open as well. Why it was working and is not working after a power outage?
View 2 Replies
View Related
Mar 21, 2011
don't steer the topic from PPTP to IPsec and other types of VPN which is more secure than PPTP,,,,etc have got this scenario windows 7 is acting as vpn client at home and windows XP is acting as vpn server at workAt home (LAN address is 192.168.10.x/24)And I configured windows 7 as VPN client same as here [CODE]
View 6 Replies
View Related
Oct 31, 2011
Cisco 2651xm router
IOS: c2600-ipvoicek9-mz.124-15.T7.bin
Can a 2651XM router be configured as a PPTP VPN endpoint (client)? I ask because I want to connect this router to a professional vpn (privacy) service such as proxpn or mullvad or similar. If it can't, any vpn privacy services that cater for cisco-based vpn connection?
View 0 Replies
View Related
