Cisco Switching/Routing :: 1800 - Configure IP SLA With ICMP Tracker?
Jan 16, 2012I would like to configure IP SLA with ICMP tracker. What is the minimum IOS & Feature required in cisco 1800 Router?
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: IOS AAA And Telnet 1800 Configuration
Mar 1, 2012I have aaa new model configured on a number of isr's(1800, 1900, 2900, 3800 etc). When i have aaa configured, the telnet logins use that authentication and not the password in the line vty portion. Is this by design. would disabling aaa enable both telnet and aaa authentications, essentially making it a dual login.
View 3 Replies View RelatedCisco Switching/Routing :: 1800 ISR Without Access List?
Apr 19, 2012I have an 1800 isr that is running with port forwarding only. It is running a series of ip nat inside source static address port address port commands. It does not have an access list bound to the outside interface. This is working fine, but i am wondering if this is a security concern?
View 1 Replies View RelatedCisco Switching/Routing :: To Edit Configuration In 1800 Router
Jan 11, 2012I am new user of cisco router i can access the hardware and login in the account but the problem is if i use the command "enable" asking for a password, old I.T. personnel who setup this router already resign.
View 2 Replies View RelatedCisco Switching/Routing :: Can't See Any Debug Message On 1800 Router
Jul 19, 2012I have strange problem with 1800 router , I can't see any debug messaging , the ping from PC to this router is Ok , but no icmp debug appears , even I enable "debug ip icmp " the version of router is : C181X Software (C181X-ADVENTERPRISEK9-M), Version 12.4(6)T6
View 2 Replies View RelatedCisco Switching/Routing :: 1800 - How To Use Gateway On Separate Network
Sep 30, 2012I've just started out playing with a Cisco 1800 router to gain some knowledge of Cisco devices before taking a CCNA. I also have a 2950 switch but will start with the router.
I'm using an Android phone as a wireless Internet access point. This issues IP addresses by DHCP in the 192.168.43.x range with 255.255.255.0 subnet.
Also I have a Linksys WRT54G router running DD-WRT firmware acting as a wireless bridge to the Android phone, and it has 4 LAN ports.
This bridge is up and running and I have successfully connected my laptop to the Linksys for testing and can use the Internet provided by the phone.
Connected to the Linksys is a Cisco 1800 router. Connected to the router is my Citrix XenServer PC and a NAS box.
The XenServer and NAS are on another network 07.05.19.x range with 255.0.0.0 subnet using their own static IPs. One of the virtual clients on the XenServer will be a DHCP server to service other virtual clients. All still in the 07.05.19.x range.
Basically I want the devices on the 07.05.19.x IP range to be able to use the Internet gateway at 192.168.43.1 to access the Internet.
How would I set up my 1800 to achieve this?
Also, am I right in understanding that the 1800 will ignore DHCP leases from the Android phone due to it being a Layer 3 device.
Configure Cisco Router 1800 To IP VPN?
Jan 23, 2011My boss want me to configure a cisco router 1800 series to an IP VPN, but I don't know how to configure a router with an IP VPN...
View 2 Replies View RelatedCisco Switching/Routing :: 1800 / 1900 / Unable To Receive Multicast Over GRE Tunnel
Sep 1, 2012I setup a GRE tunnel between two cisco 1800 & 1900 routers. I can't received multicast.
Here is a copy of my configs:
R3#Building configuration...
Current configuration : 1238 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname R3!boot-start-markerboot-end-marker!logging message-counter syslog!no aaa new-modeldot11 syslogip source-route!ip cefip multicast-routing no ipv6 cef!multilink bundle-name authenticated!archivelog config hidekeys! interface Loopback0ip address 10.0.0.3 255.255.255.255!interface Tunnel0ip address 192.168.24.2 255.255.255.252ip pim sparse-modetunnel source Loopback0tunnel destination 10.0.0.1!interface FastEthernet0/0ip address 10.0.3.1 255.255.255.0ip pim sparse-modeduplex autospeed auto!interface FastEthernet0/1ip address 192.168.23.2 255.255.255.252ip pim sparse-modeduplex autospeed auto!interface Serial0/0/0no ip addressshutdownno fair-queueclock rate 2000000! router eigrp 1network 10.0.0.3 0.0.0.0network 10.0.3.1 0.0.0.0network 192.168.23.2 0.0.0.0no auto-summary!ip forward-protocol ndno ip http serverno ip http secure-server!control-plane!line con 0line aux 0line vty 0 4exec-timeout 5 0privilege level 15no login!scheduler allocate 20000 1000end
[code]....
Cisco Switching/Routing :: ME3800 - ACL To Match ICMP
Nov 24, 2011We have some ME3800MX router/switches running ME380x-UNIVERSALK9-M), Version 12.2(52)EY2. The Cisco website says:
The switch does not support these Cisco IOS router ACL-related features: # •Non-IP protocol ACLs (see Table 26-1) or bridge-group ACLs
how we would match ICMP traffic then?
Cisco Switching/Routing :: Monitor ICMP Traffic On C6509?
Dec 22, 2011Both regular IP traffic and ICMP traffic are passing through the source port. C6509 provides the option of filtering vlan traffic during monitoring. But I don't have vlan traffic.
qa-c6509-c(config)#monitor session 1 filter ? vlan SPAN filter VLAN
So I applied an access-list which only allows icmp traffic to be sent out of the monitoring port. But it does not work.
Cisco Switching/Routing :: 1841 Enable ICMP After Auto-secure
Dec 31, 2011I ran autosecure on my 1841 routere and now I cant do ping or traceroutes. What should I do to enable the pings and traceroutes after auto secure is done.
View 1 Replies View RelatedCisco Switching/Routing :: 3750 - ICMP Redirect Aging Timer
Apr 29, 2013Amazed I cannot find this in any documentation but I want to know the default aging timer for ICMP redirects on a 3750 switch running at layer 2.
View 10 Replies View RelatedCisco Switching/Routing :: Nexus 5500 Duplicate ICMP Echo-replay
Nov 24, 2012I am experiencing inconsistent echo-replay from devices connected via VPC to Nexus 5500s while pinging from the Nexus exec prompt.
In some cases I receive normal response when pinging from one Nexus, but no response when pinging from the other switch. In other instance I receive normal response to one Nexus, and duplicate replays to the other. It looks like a VPC related bug. NXOS is 5.1.3.N2.1
5501# ping 10.12.12.232
PING 10.12.12.232 (10.12.12.232): 56 data bytes
64 bytes from 10.12.12.232: icmp_seq=0 ttl=253 time=8.585 ms
64 bytes from 10.12.12.232: icmp_seq=0 ttl=254 time=9.227 ms (DUP!)
64 bytes from 10.12.12.232: icmp_seq=1 ttl=253 time=1.011 ms
64 bytes from 10.12.12.232: icmp_seq=2 ttl=253 time=8.097 ms
64 bytes from 10.12.12.232: icmp_seq=2 ttl=254 time=9.429 ms (DUP!)
64 bytes from 10.12.12.232: icmp_seq=3 ttl=253 time=18.195 ms
64 bytes from 10.12.12.232: icmp_seq=4 ttl=253 time=8.807 ms(code)
Cisco Switching/Routing :: ICMP High Response Time To SVI Interface 3750X
Mar 13, 2011I am in the process of installing a 3750x (IOS 12.2 (53r) SE2 IP Base) Cisco Catalyst switch in a new network of just 2 PC's (2 hosts, OS windows7 64Bits). I have enabled SVI interfaces with the both hosts installed in 2 different network segments. We then start connectivity test. The response time for the PING command between both hosts remain below 1 millisecond, whereas the response time between the hosts and their correspondent SVI interface is variable, and at all time is higher than 1 millisecond, sometimes it reaches 17 milliseconds. (Note that the switch CPU usage is only 8% at the time of testing) We have performed this same connectivity test changing the 3750x switches and in two different locations obtaining the same results.
View 2 Replies View RelatedCisco Switching/Routing :: C6509 Loss Of Packets ICMP Sent By Different Hosts In Different VLAN
Oct 17, 2012I've a big problem with a loss of packets ICMP sent by different hosts in differents VLAN. Here my architecture:
Core Switch : 2 Switch's C6509 (Version 15.0 (1) SY1)- Mode VSS - One lien VSL , the other link is defective.Access Switch: C3750 , Connected to Core Switch through 2 fibre optique wires.Topology: redundant ring
When I send consecutive ping message I found always a missing of packets . Furthermore When I insert the "show ip traffic" command., the parameter "bad hop count" increase after a loss of packets. I've 2 hosts connected in my network and they send packets with TTL =127.
In the Core Switch I haven't configured the MEC because it gave me troubles with the packets multicast.
Cisco Switching/Routing :: 3750 Switch - ICMP Delay To Default Gateway
Aug 25, 2012I had setup a lan infrastructure with 5 3750 stack swithes. In these 3 of them are in one stack which is acting as access switch, 2 of them in another stack which is as core switch where all the SVI is configured. Now, when i tried to ping from our edge pc which is connected in access switch to default gaeway, which is configured in core switch, the ICMP is getting delayed . But when try to ping from the same edge pc to another user PC, it is getting less tahn 1 millisecond icmp replies.
why icmp is delaying to default gateway , but working with another edge to edge pcs without any delays?
Cisco Switching/Routing :: IP SLA ICMP Echo Support Catalyst 3560X / 3750X?
Feb 13, 2012Need to clarify if ip sla icmp echo operation is supported in catalyst 3kx switches (ip services)? on the configuration guide, commands are available, but on the feature navigator, i can't find the feature, only ip sla video operation. i don't have a device to test on here.
View 2 Replies View RelatedCisco Switching/Routing :: WS-C2950S 23 Hours Of Icmp Ping Unreachable On Switch?
Mar 7, 2012Today one of our 9 Cisco switches a "WS-C2950S" (we also got 2 other WS-C2950S on same network) stop responding icmp ping packages. When i tried to telnet the switch its network was unreachable but i was able to see its existance from other switches by "sh cdp neig". So i decided to fix the situation on a suitable night time work, checking by console cable or even rebooting the device.
Then i started to wonder... what this could possibly be about?We have like 40 clients behind that switch and there was no communication problem during the problem.
Cisco Switching/Routing :: Catalyst 3750-x Icmp Delay To Default Gateway?
Sep 10, 2012i am facing a problem when the client vlan is commmunicating with the default gateway on the core 3750-x.
ios in 3750-x core is 3750e-universalk9-mz.150-2.SE.bin. But, client to client communication is happening without any dealy and icmp is less than 1 ms always.
When try to ping default gateway of client vlan, it is getting delayed (variable icmp delays). Is this an ios bug?
Cisco Switching/Routing :: 2811 Disable Audit-trail For Icmp Packets In CBAC Logging
Mar 23, 2013I have a cisco 2811 router set up as a nat/firewall gateway for my network. I've configured it for CBAC on using ip inspect and an access list.What I want is to use audit-trail to record network traffic (which means sending syslog messages to a server) concerning established sessions from my own network to locations in the outside. If i configure this using ip inspect audit-trail and no ip inspect alert-off, the configuration looks like this: [code] which works just fine, but there is the matter of icmp packets.
Since i use polling software that needs to check some machines in the outside part of the network, it is only natural that several icmp sessions are established through the Inspection Rule per minute. The problem is that since these sessions are recorded along with everything else, my syslogs are flooded with these (since i am using logging trap informational) to the point that more messages are generated about icmp than all other traffic combined, especially in non-working hours.What I am asking is a way for the audit-trail to be selecively disabled for icmp, so that the outgoing (echo) &incoming (echo reply) sessions can be established without generating syslog messages.
Cisco Switching/Routing :: 7200 - QoS Input Policy Doesn't Classify ICMP Packet Based On DSCP
Dec 20, 2011I have made some test and i noticed that qos input policy does not classify the icmp packet based on their dscp.The "match dscp ef" or "match precedence 5" is not working only the "match protocol icmp" shows hits.
We need to classify the different icmp packets based on dscp ( TOS ) for measurement purpose.CISCO 7200, 12.4.25d and 12.4.20T have a same behavior.
Cisco :: Is There Any VOIP Laps For Packet Tracker
Nov 16, 2011As the thread title says, I just want to gain better understanding by practising the config.
View 1 Replies View RelatedNetgear Wndr3400v2 - Port Tracker Is Closed
Aug 8, 2012I have followed all instructions to forward port 22 on my netgear router WNDR 3400v2. It says it forwarded but according to port tracker. Its closed. I am having this with two different locations. All IP addresses are correct and the router can ping them. It just wont open. Using SSH program for port 22 access.
View 10 Replies View RelatedCisco WAN :: Routing With 3 Public IP Net On 1800 Router
Nov 28, 2011I don't know much about routers, but lately I've been playing around with router configuration and getting better but I am kind of stuck now.
The scenario is this.
I have 3 ip net from the ISP:
178.249.51.0/255.255.255.248 Gateway 178.249.51.1
178.249.51.8/255.255.255.248 Gateway 178.249.51.9
178.249.51.16/255.255.255.248 Gateway 178.249.51.17
[Code]....
I am also wondering - when we get more public IP net from the ISP, is this the correct way to do it?
Cisco Firewall :: ASA5510 / 1800 / 3825 - Routing Configuration
Aug 15, 2011I try to setup a ASA5510, but without success. Actually, I have Cisco1800(192.168.96.1/21) from my ISP connected to a Cisco 3825 (via port with IP 192.168.96.2) all is working good. Now I want to insert a asa firewall between ISP router and 3825.
For that, I tried a more simple config :
ISProuter (192.168.96.1/21) ---- ASA outside port(192.168.96.2/255.255.255.248) ASA INSIDE port (192.168.100.1/255.255.255.0) --- a pc with IP 192.168.100.2, netsmask 255.255.255.0, gateway 192.168.100.1
From my ASA, I can ping 192.168.96.1. but a "ping INSIDE 192.168.96.1" fail
from py pc, can ping 192.168.100.1, but not 192.168.96.1
Here, my ASA config :
ASA Version 7.0(8)host name cisco asa
enable password 8Ry2YjIyt7RRXU24 encrypted
password 2KFQnbNIdI.2KYOU encrypted
names dns-guard
!
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
[code]....
Cisco Switching/Routing :: 800 / Use ASA To Configure All The Vlans And Intervlan Routing And Access Lists?
Jul 4, 2012upgrading our small office network. We currently have about 75 employees with probably 125 devices on the network. I'd like to create about 10 vlans for the different departments and then configure intervlan routing as needed. Currently we have all unmanaged switches and it's just a huge broadcast storm on the network. We are upgrading our Cisco 800 router to an ASA5505 sec. Plus license. I need some recommendations on switches. Of course, this needs to be done as cheap as possible.... Is there a way to use the ASA to configure all the vlans and intervlan routing and access lists and use a cheaper switch to provide the access layer to hosts?
View 4 Replies View RelatedCisco Switching/Routing :: How To Configure Policy Based Routing On 3750
Jan 28, 2013In our datacenter we have a 3750 stack with IP base image. I have enabled PBR and reloaded the switch. Show sdm prefer says i am using default template. The reason i want to use PBR is that we have 2 firewalls on the same work and want to be able to have granular control over which gateway out of the network they use but still be able to access all internal resouces accross wan and locally.
Created access list to identify traffic:
access-list 10 permit 10.2.3.59 (test workstation on vlan 3)
Created policy:
route-map TestASA permit 10
match ip address 10
set ip next-hop 10.2.0.3
Assigned policy to the user vlan3:
ip policy route-map TestASA
Results:It changed the default gateway to the above gateway but i could not access any resources on any other vlan, could not access resouces accross wan.
Cisco Switching/Routing :: Configure Routing Between 2800 And 3550
Sep 18, 2012The layer 2 switches are connected to layer 3 Switch via trunks, and routing between layer 2 switch ports with configured SVI's on 3550. All working fine. Now I'm trying to configure routing between 2800 and 3550, I tried connecting both Straight Throught and Crossover cables to the 2800 Fa0/0 and Fa0/1 ports as well as the switchports on 3550
No switchport commands are configured however, the lights do not go on for both straight through or crossover cables. I tried connecting 1750 routers but same result. My goal is to have all the VLANS routed to the internet with configuring NAT translation the router.
Cisco Switching/Routing :: How To Configure Routing On ASA 5505
Dec 5, 2011how do i configure the new asa 5505 to be as a router as shown in the diagram note: the isps' routers placed in head office. but i cannot change the configurations of the isp's routers.
View 9 Replies View RelatedCisco Switching/Routing :: To Configure DNS On 800
Jan 9, 2013i try to configure DNS on cisco 800 , it's worked , but after 24 hours the command ip domain-lookup change to disable, and it stop work
i'm not understanding why it's happen ,
that's the configuration
ip domain name XXXXXX.CC.CC
ip host XXX-RR-FF.com 2.2.2.2
ip name-server 1.1.1.1
[Code]....
Cisco Switching/Routing :: Best Way To Configure NAT ASA 5520?
Jun 21, 2012If I have an ASA 5520 with an INSIDE interface, a DMZ interface and a WAN interface what would be the best way to configure NAT? If I configure nat-control and a nat (inside) 1 0.0.0.0 0.0.0.0 this will configure everything to be NAT'd when passing from the INSIDE interface out.My question is what about the devices I want to access in the DMZ from the inside for management etc? I'm guessing the ASA isn't smart enough to realise you're accessing hosts in it's DMZ interface so do you have to configure a nat 0 rule for every subnet within the DMZ you want to access or is there an easier way to do it? It's worth noting that the same devices will be accessing the OUTSIDE network and the DMZ network from the INSIDE network.
View 6 Replies View RelatedCisco Switching/Routing :: Configure VLAN On 881?
Dec 2, 2012I have a customer who is on thr 192.168.254.x subnet and is using a Cisco 881 as their gateway.
They wish to create a second VLAN for the 192.168.253.x subnet.
The Cisco has Dialer0 configured for an ADSL connection.
I have partly configured the router but need some info regarding router a device on the 192.168.253.x subnet to the internet.
configure routing to the internet on the new VLAN and assist in setting up a DHCP server on that vlan. I have attached a copy of the current config.
Cisco Switching/Routing :: How To Configure QoS On 3560
Nov 23, 2011I configured following command to implement QoS on Cisco 3560.
class-map match-any IND
match access-group name Lync
policy-map LyncAV
class IND
set ip precedence 4
[code]....
how to apply this QoS on interface?
