Cisco Switching/Routing :: SRW2024-K9-BR / Switch To Configure Static ARP Entry For MS NLB Multicast?

Mar 14, 2013

I need a switch to configure a static ARP entry for a MS NLB multicast.

Could answer me if I can do with the SRW2024-K9-BR?

View 4 Replies


ADVERTISEMENT

Cisco Switching/Routing :: 6509 Static MAC Address Entry And MS NLB / IPv6

May 23, 2012

I have seen other discussions regarding Static MAC address entries on IPv4, but what of IPv6?We have MS NLB solutions and they are working fine. We have Cisco 6509/6504, Version 12.2(33)SXI5
 
But then we have a new one for a new ActiveDirectory solution, and on those networks we have implemented IPv6.
 
How is Static MAC address entries and MS NLB solved in IPv6 (i.e arp ip.ip.ip.ip mac.mac.mac ARPA gi1/1). I can't seem to find much examples or documentation on this? Is it replaced with another function?The reason I ask is twofold.

1. I really want to know

2. The NLB cluster seem to drop IPv6 traffic at even intervals, witch seems to correspond with NLB transition.

View 1 Replies View Related

Cisco Switching/Routing :: 3560 - Unable To See Entry For Switch

Oct 30, 2011

I have configured a new switch 3560 switch and connected to 4500 switch and formed a trunk connectivity.Now the issue i am facing is when i do a SH CDP NEIGHBOUR from 3560 switch i am able so see 4500 swries switch but at the same time when i do SH CDP NEIGHBOUR form 4500 series switch i am not able to see the entry for 3560 switch.But i am able to telnet the new switch with out any issues

View 11 Replies View Related

Cisco Switching/Routing :: Clearing Single ARP Entry In 6500 Switch?

Feb 2, 2009

Is there any way to clear a single ARP cache entry on the 6500 switch ?

View 8 Replies View Related

Cisco Switching/Routing :: Login To 2950 Switch And Modify VLAN Entry On It?

Nov 3, 2011

In my lab, there are some machines that are connected using Cisco 2950 switches. Those machines belong to a VLAN.Now I need to modify the VLAN settings of the machines and as such I also need to modify the VLAN settings on the ports on the Cisco switches.
 
In order to do this, first I need to login to those switches, but due to a lack of knowledge transfer, I don't have the password. Is the some generic password?Second I will need to  modify the VLAN settings on each individual port. How can I do this?

View 2 Replies View Related

Cisco :: Configure 2960g Switch Static Routing?

Jan 26, 2013

I have routing enabled, can build a static route, and go back and see it (sh ip route), but I don't know how to get the route right. I have one host (Host A) on Vlan 20 w/192.168.20.2/24 dg 192.168.20.11 (the vlan ip) and (Host B) on Vlan 30 w/192.168.30.2/24 dg 192.168.30.11 (the vlan ip). I can't ping them from any host man. I can ping the Vlans but not the host.

View 19 Replies View Related

Cisco Switching/Routing :: How To Configure 6506 Or 2960G To Process Multicast Traffic

Aug 8, 2012

Multicasting.  The configuration is I have a 6506 as my core switch receiving multicasts from an interface assigned to VLAN10.  I have a monitor port setup with a PC running Observer which says multicasts are being received on the core switch.  On a different interface on the core switch I have a 2960G switch connected to it and this interface is on VLAN 10.  The 2960G switch has a workstation connected to it that needs to receive the multicasts.  How do I configure the 6506 and/or the 2960G to process the multicast traffic?         

View 0 Replies View Related

Cisco Switching/Routing :: 2960 / 6513 - Multicast Between VRF On Same Switch

Sep 3, 2012

I am working on Multicast scenario, There is one 6513E switch one 2960 switch. Two VRF's are configured in core switch (6513) IPTV-SRV and Villa-VRF IPTV-SRV vrf has IPTV server and Villa-VRF has IPTV i.e. client.
 
V LAN 30 is mapped to IPTV-SRV vrf with subnet address 192.168.30.0/24
V LAN 12 is mapped to Villa-VRF with sub net address 192.168.12.0/24
 
I did the following configuration for VRF but its not working . i am not an expert in multicast design but seems i did most of the configs.
 
ip vrf IPTV-SRV
rd 30:1
mdt default 232.1.1.1
route-target export 30:1
route-target import 10:1
[code]...

View 3 Replies View Related

Cisco Switching/Routing :: Finding Switch That Supports 4096 Multicast Groups

Jul 10, 2012

Any switch that supports 4096 multicast groups?I am working on a system that includes over a dozen catalyst 2960 switches.  The customer has pointed out the 2960 switch does not satisfy the requirement to support 4096 multicast groups (even though it is more than adequate for the number of active multicast groups).  It looks like the 3560 supports more multicast groups than the 2960, but is still far less than the requirement.

View 1 Replies View Related

Cisco Switches :: Manual Multicast ARP Entry For SG300

Jan 22, 2012

We're replacing our older catalyst switches with new SG300 family switches and have a Microsoft NLB cluster for some services that run in multicast balancer mode.
 
We currently do L3 routing to the network with the cluster and have the following IOS configuration line in the specific switch to let users on other subnets to access the services.
 
arp 10.20.1.226 03bf.0a14.01e2 ARPA
 
How do we replicate this using the SG300 series in L3 mode? Whenever I try to add a manual ARP entry I get an error message that says that the MAC address is not a valid unicast address?

View 4 Replies View Related

Cisco Switching/Routing :: 3750 / 3800 - Configure Trunk Between Switch And Extreme Switch

Nov 2, 2011

i have an issue to connect a trunk between cisco switch and extreme switch i have many vlans that i want to cross via a link between cisco 3750 switch and a Extreme Alpine 3800 switch

View 12 Replies View Related

Cisco Switching/Routing :: Static Routing With C2960G Switch

May 28, 2013

Two Cisco C2960G Switches connected with each other using an EtherChannel Trunk Ports.IOS Image has been upgraded to c2960-lanbasek9-mz. 122- 58.SE2.bin.The global command "sdm prefer lanbase-routing" has been executed to set the default template to "lanbase-routing".The global command "ip routing" has been executed to enable the ip routing.An IP route has been configured in each switch to point to each other for the static routing purpose (Please see the 2 attached configuration files) The hosts in VLAN 111 and VLAN 110 are not able to see each other even the ip static routes have been configured.May be I have misconfigured some settings but not sure what's the actual problem.

View 11 Replies View Related

Cisco Switching/Routing :: IP SLA On 3750 Switch To Track Static Route?

Oct 15, 2012

i wonder if i can make a backup static route for an existing link over wan using the below diagram
 
the Core Switch type is 3750 in both sides i`m using only static routing for  all destination like
 
Core1:
ip route 192.168.8.0 255.255.255.0 172.10.10.30
 
Core2:
ip route 172.17.200.0 255.255.255.0 192.168.100.105
 
requirements is to track the reachibility for the core ip address from both sides & change the routing automatically to the backup tunnel line

View 1 Replies View Related

Cisco Switching/Routing :: 3750 Switch - Eigrp Stub Static Redistributed Command Executable?

Feb 29, 2012

On 3750 switch with IOS c3750-ipbasek9-mz.122-55.SE4.bin  "eigrp stub static redistributed" command will be executable ?

View 1 Replies View Related

Static IP Address Entry Will Not Save?

Feb 24, 2011

Everytime I start one of my two Windows machines, I need to go to the control panel network adapter and enter the static IP address in the IPV4 properties. It is always blank after a shutdown.I have two machines that are networked for flight simming.One of the machines must have a static IP so I configured both static. Not sure if this has anything to do with my problem.

View 5 Replies View Related

Cisco Switching/Routing :: SF 300-48 Layer 3 Switch Tried To Configure To Use

Aug 24, 2011

I got one SF 300-48 layer 3 switch I tried to configure to use it in the office network.Unfortunately I'm unable to configure the VLAN settings.I need port one for input(VLAN2),port 7-15 for another vlan(vlan3) also need to connect with the vlan 4.port 15 is another vlan(vlan4) this is for wireless.Other ports are static.It doesn't get any connections with other vlans.I wish to know how to configure vlans in GUI mode.I tried , But I can't get the Vlan setting correctly.Also,I need to know how to communicate both vlans in GUI mode.

View 8 Replies View Related

Cisco Switching/Routing :: Configure QOS In 3750 Switch?

Nov 7, 2011

configure qos in Cisco 3750 switch.I have configured below template and applied on the vlan interface.But i am getting the hit on the access list but I am not able to get hit on the class map.

View 2 Replies View Related

Cisco Switching/Routing :: How To Configure 2960 Switch

Dec 12, 2006

I have CISCO 2960 switch at my LAN. How to configure its IP address from console or hyper terminal ?

View 11 Replies View Related

Cisco Switching/Routing :: Configure New 2960 POE Switch?

Jan 14, 2013

I am trying to configure a new  2960 POE switch, but seem to me the int fa0 is layer 3 interface. Is any way we can convert it to a switchport, so we can connect it to other switch in trunk mode?

View 1 Replies View Related

Cisco Switching/Routing :: Configure QoS On 3560 Switch?

Jun 7, 2012

configure QoS on 3560 switch i have taken the template from cisco configuration guide since we have different QoS configuration on each model.
 
below is the configuration :
  
configure terminal
mls qos
end                  
mls qos map cos-dscp 0 8 16 26 32 46 48 56
no mls qos srr-queue input cos-map                mls qos srr-queue input cos-map queue 1 threshold 2 1                mls qos srr-queue input cos-map queue 1 threshold 3 0    

[code]....
 
Currently all the cisco phones are connected to this switch and configuration with only one vlan that is voice vlan .
 
1) what is the outcome of this configuration , i mean, what will be the expected output ? end of the day we need to prioritize the voice traffic but why other commands including threshold and buffers are mentioned with respectives queues , if I need to explain that what am i expecting out of this configuration ?
 
2) this is LAN QoS which i understood but again , do i need to configure policy-map along with class-map which is MQC on this switch ?
 
3) i have edge router where i have MQC already configured but confusion with this switch which is working as a Access switch .

4) I referred the cisco QoS document for the respetive model whereas we have policy-map configured on the same switch with class-map .

My understanding is if we have configured the LAN QoS , and mapped the CoS value with DSCP , we need not to have MQC.

View 4 Replies View Related

Cisco Switching/Routing :: Nexus 2000 How To Configure Dynamic-pinning / Instead Of Static Pinning

Sep 18, 2012

Any info on how to configure dynamic-pinning, instead of static pinning on a Nexus 2224 connected to a 7009?Can't seem to find anything on CCO!

View 9 Replies View Related

Cisco Switching/Routing :: Configure CFM In ME 3400 E Series Switch?

May 13, 2012

We are using cisco ME 3400 E series switch. Which port we can use as CFM port ? We configured CFM in gig port.Is all the ports will act as CFM port or any separate CLI command is there for enable ?

View 0 Replies View Related

Cisco Switching/Routing :: Configure 3560 Switch With IP Cameras?

Aug 19, 2012

I want to configure Cisco 3560 SWITCH with IP cameras. I need to configure the ports connected to Camers. IP addresses to the Cameras has been assigned.

View 1 Replies View Related

Cisco Switching/Routing :: How To Configure Dns / Dhcp In Switch 3860

Mar 18, 2010

am having a switch 3860 it is configured dhcp , dns  i want to change those dhcp , dns, what are the command that is use to reconfigure it

View 1 Replies View Related

Cisco Switching/Routing :: 2960 - Configure A New Switch Remotely

Mar 8, 2012

Today in my rush to get home I plugged in a new 2960 stack and did a little bit of very basic configuration, but no passwords were set.  I tried to telnet in and the message says that a password is required, but none is set.  I tried the SDM as I hadn't turned it off yet and it is prompting me for a user/pass but I have no idea what to put in there.  No console is available, it's a new office so no employees around either.

View 14 Replies View Related

Cisco Switching/Routing :: How To Configure 1 Core Switch 4500

Jun 2, 2013

i configure the uplinks as etherchannel, i configure two svi interface on core switch int vlan 51(192.168.51.1) and int vlan 50(192.168.50.0) for this two svi int i configured two dhcp pool , when any of the pc is requesting for dhcp add i am getting dhcp request failed/

View 7 Replies View Related

Cisco Switching/Routing :: Switch 2960S Did Not Configure Username

Jun 5, 2013

After i have already configured my cisco switch 2960 , i configured my console as the below [code] after i reboot my switch , i found that the switch asked me for username . However i did not configure username , how can i solve this problem , without password reset . I have already configured 15 switch , 100% this problem will be in all switches.

View 19 Replies View Related

Cisco Switching/Routing :: 3560X Configure DHCP On Switch

Apr 29, 2012

I have Cisco 3560X L3 switch and i need to configure DHCP on this switch. I have already configured below mentioned VLANs
 
VLAN 10 - 192.168.8.254 (USER VLAN)
VLAN 20 - 192.168.152.254 (REMOTE & VPN USERS VLAN)
VLAN 30 - 192.168.0.254 (SERVER VLAN)
 
After configuring DHCP, all the users needs to get IP from USER VLAN and all the servers should get IP from SERVER VLAN. If yes, what are the steps as I am very new in this kind of configuration.

View 5 Replies View Related

Cisco Switching/Routing :: Configure VLAN On 2960S Switch

Jan 20, 2013

I have hybrid network in which I want to configure VLAN on  Cisco 2960 S switch. I have unmanged switch where my DHCP server and other servers are connected. Now I created two VLANs on cisco 2960S and they don't talk each other, but as soon as I connect unmanaged switch to 2960S switch, both VLANs start communicating which I don't want. I want to listen server traffic from unmanaged switch from both VLANs but simultaneously I don't want to communication between two VLANs.

View 10 Replies View Related

Cisco Switching/Routing :: Configure 2940 Switch To Work With 1841?

Mar 5, 2012

I have a Cisco 2940 switch and a Cisco 1841 router. I want to build two different VLAN networks on the switch, which do not have to communicate one with each other, but those VLANS should communicate with the router.
 
I read a lot of articles, i tried to configure properly the switch and the router but i still don't get them work.
 
I set on the switch, the GigabitEthernet 0/1 port to Trunk port and i had to set it a native VLAN. The problem is that only from that native VLAN, i can ping the router.

View 17 Replies View Related

Cisco Switching/Routing :: Configure 3560X Switch For ISCSI Connectivity

Mar 19, 2012

I haven't worked with infrastructure much lately but planning on replacing a Dell switch used for a small iSCSI SAN with a Cisco 3560x. Switch is sstorage ONLY, network handled through different switches. I believe I want to disable spanning tree and configure trunking for the 4 GB ports connected to the storage array. The switch is providing connectivity to SAN via multiple GB connections and then also multiple GB connections to 3 Vmware hosts.Can you look over the changes I made to config below and let me know if I am on the right track.
 
I also plan to add a second switch later with the 10GB modules to interconnect for redundancy (but not worried about that part for now). I do not plan on using jumbo frames.
 
Here are my questions

1) Is the best way to globally disable spanning tree for the switch?

2) Did I trunk the ports correctly below?

3) Should I apply any specific SmartRoles to the 4 SAN NICs (GE1-4) or to host NICs (GE13-20)?

4) Anything additional I should do to handle iSCSI data? 
  
Here is a copy of the config so far with my changes marked in RED.

storage1#wr tBuilding configuration...
Current configuration : 1696 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: How To Configure GLBP On 3750 Stack Switch

Nov 30, 2011

I have WS-C3750-48PS-S, i wanted to implement GLBP on this switch, Is it possible to configure GLBP on this switch?
 
IOS :                    c3750-ipservicesk9-mz.122-55.SE4.bin
Part number:     WS-C3750-48PS-S

[Code].....

View 4 Replies View Related

Cisco Switching/Routing :: Configure New Server With Nexus 5548 Switch

Jul 15, 2012

My Name is senthil i need to configure new hp sever with Nexus 5548 how to config.. server side everything finished just i need only
 
Config tips for Nexus 5k for New server

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved