I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
We have two 4404's and WCS. The 4404's are almost maxed out. We have an addition 4404 which we would like to add to the group of 4404's
View 1 Replies View RelatedI have a Cisco WLC 4404 with version software 7.0.230.0 and it gived me a this logg
Oct 9 15:43:08 192.168.122.34 WLC_4404_CC: *osapiReaper:
Oct 09 15:41:49.549: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/895/stat.(erno 24)
I have a WLC 4404 installed and we would like to manage the bandwidth per SSID.
Today we have configured many SSID because our campus has a lot of wireless users and any SSID has only one class C subnet (/24).
We would like to configure each SSID with more subnets. is this possible ?
Additionally we need to restrict the bandwidth per SSID. is this possible ? We have some SSID for less important users and we would like to assign the bandwidth per SSID.
I have a Cisco 4404 WLC that is up, has green status light, the interfaces are showing activity. I see it connected to my Cisco 6500, (Sh port status) it shows connected and trunking,; I also see a lot of activity on the interfaces. Also it will not let me console in, I can console in on my other Cisco 4404 WLC's with out and issues, so I know my cables and configure are correct. The only change a I made today was the time zone. I noticed the time was off by a hour and noticed that the time zone wasn't set so I set it correctly. Shortly after that I saw the WLC go belly o up in my WCS. I tried rebooting the WLC several times without luck. Since I can not gain access via the console I can not really trouble shoot.
View 10 Replies View RelatedTrying to upgrade my Wireless LAN controller model 4404, I'm running 4.1.190.4 code and want to upgrade to 6.0.202. Looking at the release notes for 6.0.202 and the compatibility matrix, the matrix indicates I two intermediate loads first. One is 4.1.192.35m and the other is 6.0.182.0 then I can load 6.0.202 code. My problem is I can't find the 4.1.92.35m code. Looking at the software download the highest 4.1 folder has is 4.1.185.0. where to find the 4.1.192.35m code for 4404 WLC?
View 1 Replies View Relatedwe have cisco wlc 4404. and we want to access it thru internet.
i have attached the management interface screenshot.
WLC 4404 is configured as Anchor controller, the MAC violation are captured by Controller. the Violated MAC are deleted manually through GUI, but when tried deleting through CLI using command
>Config exclusionlist delete <mac address>
we get error message as error deleting user <mac address>
We have 2 4404 controllers running 6.0.x code. I have several SSID setup with different VLANS. When the clients associate they do not show the name of the AP they are connected to, is there any way to display the assocated AP name?
View 2 Replies View RelatedI got a WLC4404 running software version 5.1.151.0 with 40 LWAPPs (mostly 1242AG). We got new Dell Latitude E6500 Laptops with Intel 5100 NICs. After upgrading the bios to the latest version and installing the latest wlan driver, wireless is working the most time.After about 4 reboots I see the following message in the WLCs logfile: "Thu Sep 18 13:53:10 2008 AAA Authentication Failure for UserName:host/hostname.domain.name User Type: WLAN USER".After I disable the wlan-card, it's working again.
View 7 Replies View RelatedI am facing a strange problem in my WLAN Setup. none of my wireless clients are able to associate with Wireless LAN but when I delete and create a new wireless profile in WLC 4404 clients starts associating with WLAN. every 2-3 days I had to delete and create wlan profile. Is it related to IOS bug or any other problem? My Wireless LAN Controller image is AIR-WLC4400-K9-5-1-151-0.aes.
View 4 Replies View RelatedUpgraded our WLC 4404 from 6 to 7 so we could upgrade some WAPs to 3500i. After upgrading all 8- 1120 and 1240s connectivity were lost.
We reverted back to OS 6 and all came back to Controller
WLC Software version = 6.0.199.4
WLC Emergnecy Image Version = 7.0.235
[Code].....
Our vendor states this should be a compatible mix and they are also checking as to why it is not working as planned.
I have a 4404 with 3 SSID's configured on it. I only want all SSID's to be available on one floor in one building and not on any other AP's in any other building or floor.I thought the way to do it was via AP group but have not had any luck getting that to work. I setup a group for the AP's that I do not want all SSID's and then assigned those AP's to that group. However, I can still see all three SSID's where I only want to see 2 SSID's.
View 4 Replies View RelatedI've downloaded Prime Infrastructure 1.2 eval and wanted to see what it looked from WCS that I am currently using to manage the wireless network and I added the WLC (4404) device but it list the device as "Managed with Warning" and I can't find what the warning is.
View 3 Replies View RelatedI have WLC 4404 Controller with 180 LWAPP. i want to disable Broadcast SSID from some specified APs not all. is it possible to do that with 4404 WLC controller.
View 9 Replies View RelatedI have Cisco 4404 WLC with Image 7.0.235.0 We have one SSID Sup_Admin with following config. Which is getting the IP address from the interface pool “corp”.
WPA+WPA2 with AES and TKIP
Auth key Mgmt is 802.1X
We are using Cisco ACS as radius server On the same WLC I have created another SSID Corp_Admin . Which also should get the IP address from the interface pool “corp”. Both SSID has the same settings ,but the second SSID is not working.
The story is that we recently upgraded our 4404 controller to the new 7.2.0.230 code. This upgrade was from 4.2.209 code. I would like to make the change to the Multicast setup so that It is multcasted and not unicasted.So I went into the controller and selected MULTICAST for AP multicast mode and entered in a multicast ip of 239.255.1.60 ( default choosen in the cisco howto's)I then test the reason for enabling the multicast and it doesnt work. The problem is that the Wireless HP printers setup to use Apples IPRINT are not able to be found. However, when I select the Multicast setting for the APs to be UNICAST the Ipads can find the Printers and print to them.What am I doing wrong with this Multicast setting? Do i need to add a Multicast address to the router?
View 2 Replies View RelatedI have a 4404 running firmware 7.0 and something happened (don't think it was a hack), but all of a sudden I can't login to the box via web or ssh or even telnet.
In trying the recovery procedure, I get a lot of messages scrolling through and cannot do the Restore-Password command on the CLI.
I'm attaching the whole capture, but here's a truncated capture from the procedure:
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*fp_main_task: Nov 21 10:39:46.501: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
[Code].....
So as you can see, my prompt to enter the command is taken up by this fp_main message and it uses up the first and only time I can enter this in. I'm trying everything I can to not have to go back to factory defaults.
I have (2) WLC-4404's with one in standby. I noticed this controller has been up for 300+ days and i was just wondering if it will be useful to reboot these once in a while? Any benefits or should i just leave them running?
View 4 Replies View RelatedCurrently Being Moderated Wireless users getting disabled
View 6 Replies View RelatedWLC4404 - United States
Software Version 5.2.193.0
where the new WLAN dosn't seem to be routing... but it's not related to name length (ours only 6 charecters). It's almost seems like the new WLC interface (interface2) isn't configured for the same subnet that it's plugged into, but it is.We actually have 2 WLANS. Alot of the original config was done before my time, between about 3 different people. The original WLAN config works fine, but part of the problem is the WLC4404 was configured our server VLAN, thus when a client gets an IP, they are placed on our main server VLAN. Our WLC4404 is connected to our 6509 in our Datacenter, and we have dozens of PTP T1's to our remote offices, which all have WAPs.On the WLC4404, I've configured a new interface on port 2, vlan404, and I have the new WLAN using that interface. The WLAN security is using WPA2, and authenticates via our ActiveDirector services, as well as handing out DHCP from our Windows DHCP server.
The client wireless PC is able to connect to the WAP, but unable to connect to anything else. It can only ping the WLC4404 interface2 address, and nothing else. It does receieve DHCP info (via WLC via Windows DHCP server), but cannot see DHCP server.From the WLC4404: I can telnet into the management IP address, and can ping PC's on the new WLAN, and anyplace else, except the vlan gateway ip address on the 6509.From the 6509: when telnetted in, I can ping everything except interface2 of WLC on vlan404 and the wireless PC using the new WLAN. I am able to ping the ip address of int for vlan404. The 6509 somewhat see's the WLC int2 & wireless PC. Show ARP | inc 404 from the 6509 shows the IP's of the VLAN int, WLC int2, and wireless PC. Show mac-add-tab | inc 404 shows the WLC and wireless PC on same 6509 port.From my work PC (via LAN) at a remote location: I can ping everything except Int2 on the WLC, and the wireless PC.
We currently have a 4404 controller that is approaching 100 AP’s (their max). The boss would like to add redundancy into the project. Which leaves me with a lot of questions and I am fairly new to cisco WLAN controllers.While a second 4404 would cover for redundancy would that be true if the AP’s pass the 100 mark?If I get a bigger controller that can support more than 100 (5508?)can the existing 4404 still work in the plan as a backup?Or do I just need to purchase two bigger units and auction off the 4404?
View 3 Replies View RelatedWe have a WLC 4404 with version 7.0.220.0 of the firmware/software.We use it to control the wireless network on our campus, we basically have 2 WLANs defined, one authenticated (using Radius [AAA]) and one not authenticated which is only turned on when needed (when we host some event).At the moment both these WLANs use the same address space, we will hopefully split it soon since that is better from a security point of view.
I would like to create an 'externalacl' for our squid proxy (script/program) that when handed an IP address can go to the WLC and find out what username was used to authenticate.Does the WLC provide any interface to this information?We also have an NCS so if it provides the interface that is also fine....
The other option I see is getting the information from the Radius server that the WLC uses, the only problem with that is that the WLC does not send Logout messages to the radius server (or the radius server doesn't interpret them properly/something wasn't setup correctly).This would result in a user on the unauthenticated WLAN that got the same IP as an authenticated user got earlier being treated like the authenticated user by squid (since radius still has an entry saying Login on IP by user).
WLC 4404 LDAP Bind Fails
View 12 Replies View RelatedIs there a command like the "| include" command to filter comand results? For example say I want to find a specific client mac in the "sh dhcp leases" output. On a router or switch I would just type "sh ip dhcp binding | include (mac address). Is there something like this on the WLC CLI?
View 4 Replies View RelatedI am new to Cisco wireless and would like replacing WLC 4404 with 5508. I mean any link or doc (best practices).
View 13 Replies View RelatedI currently have the managment interface set to my internal network using our DHCP server. We also provide another interface to WLAN for a chartity organization. Their interface and WLAN are locked out of our network (no routes, no nothing) with only VLAN tagging sending out over our backup internet connection. I have been tasked to take over their DHCP scope (255.255.240.0). I added the scope into the 4404 just fine but can't seem to assign it. So, for the sake of argument lets say:
Interface:
management VLAN 10 10.10.10.10 DHCP = 10.10.10.15
charity VLAN 20 192.168.160.2 DHCP = ????
[Code].....
If I tell the charity interface to use 192.168.160.2 for the dhcp scope it errors out. I also tried the DHCP override in the WLAN with no success. If I set either DHCP option for the charity to aim at the managment interface it does nothing as it can't find it..
I recently upgraded our WLC 4404 to release 7.0.98.0. The process was very smooth with no issues. The controller manages access points in two buildings. Prior to the upgrade the access points were maintaining high TX power levels...typically between 1 and 3. After the upgrade the power levels all droped to 6 and 8. I have confirmed that the correct external antenas have been set for each access point. I have not done a site survey to see if the lower power levels are acceptable. But the environment has been very consistent for the past year with regards to TX power levels. For the time being I have manually set a power level of 2 to prevent any service outages. Is there any explanation as to why the power levels have changed so drastically?
View 3 Replies View RelatedWe need to rename our 4404 Wireless LAN Controllers. Would like to know if renaming via the GUI (change name in the Controller / General tab and then Apply) will cause the WLC to reload. Also wondering about the best way to push the name change to the APs (High Availability) - we are not using WCS.
View 5 Replies View Relatedhow to debug an ACL I've created on a 4404 WLC, specifically I want to monitor what packets are being denied by the ACL as something that should be working isn't
I've created an explicit deny statement at the end of the ACL and verified that the counter increases each time I try the problem software update.
What I can't work out is how to get the WLC to tell me what packets are being denied by the explicit deny statement, all I can find are 'show acl' commands which just give me the counts.
The equivalent on a router would be debug ip packet acl and adding the log keyword onto an ACE. I suppose I could configure a SPAN session on the WLC uplink to the switch but that seems overkill?
My WLC 4404 runs with Software Version 5.2.193.0. The built-in IOS for AP is Version 12.4(18a)JA2.I run into problem same as in CSCta29484 Bug (Radio stops beaconing for 10-second period).I would like to try fixed image for LAP without upgrade WLC. Is it possible?
View 5 Replies View RelatedFrom what I can see on some of the message discussion boards, this is an alert only message. I would like to get clarification that this will not cause operational issues with the controller.
I did try to change the free memory by using the command
config memory monitor leaks 10000 300000
but then I get a response about core dumps and the alerts do not go away.
if there is document available for SNMP configuration for WLC 4404?
View 4 Replies View Related