Cisco VPN :: 5050 How To Perform Log In ASDM
May 2, 2011I want to perform log in ASDM if there is some one remote to server inside ASA by vpn. Does ASA 5050 able to show the log from ASDM.
View 1 Replies
ADVERTISEMENT
Dell :: Inspiration N 5050 Lost Wi-Fi Functionality Suddenly?
Nov 15, 2012i buy my dell laptop inspiration n 5050 from 3 months it works fine till the last week i lost my wifi connection .i install anew windows but the same problem also i format all partitions without fixed>also i download fix it from microsoft but nothing happen
View 3 Replies View RelatedAcer Aspire 5050 With Vista Connects To Router But Not Internet?
Jun 11, 2012i've been having this problem with my laptop since i brought it it will connect to the router but not the internet it also send packets but will not receive tried the tcp/ip thing i brought up the command prompt refreshed stuff but thats all im not skilled enough to know much in this type of technical problem i did pull up the ipconfig/all command though and this is what came up
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration[code].....
Cisco Firewall :: ASA 5520 With 8.04 And ASDM 6.1(5) Global Not Showing In ASDM
Apr 26, 2011nat global entry not showing up in ASDM but it does via CLI see blow, it's a policy NAT.
nat (inside) 5 access-list inside_nat_outbound_4
global (outside) 5 ************-OUTSIDE netmask 255.0.0.0
Global 5 doesnt show in ASDM 6.1 (5) the globals only go up to 3
Dell :: New Inspiron 5050 - Can See All Wireless Networks Except For Wireless N
Nov 9, 2012I just purchased a new Inspiron 5050 and can connect to the internet via my wireless network via the G band. However, the Wireless N band does not show up under the detected networks listing. Can someone help figure out why the Wireless N does not appear under the listing? I have a work laptop that is also a dell and it picks up the Wireless N band with no problem.
View 7 Replies View RelatedCisco - Best Way To Perform Basic Router Testing?
Jul 17, 2012I work for a company that buys used cisco equipment and we are trying to get a basic test center set up. What is the best way to perform basic router testing? We have been trying to come up with something for about 3 weeks and so far all we can do is get in the configuration and play around.
View 1 Replies View RelatedCisco Application :: ACE4710 - Unable To Perform End To End SSL?
Nov 9, 2011I have to load balance traffic between 2 servers sitting behind the LB. The webservices are on HTTPS/8443. I followed the end to end configuration guide for SSL. No success.
Here is my configuration -
rserver host nms1
ip address 10.29.36.31
conn-limit max 4000000 min 4000000
[Code].....
Cisco Routers :: RV220W Is It Necessary To Perform Initialization Of Each WAN
May 16, 2012I have 5 public, static IP's provided by my ISP. I read on another page that to use the 2nd, 3rd, 4th and 5th IPs, I must first 'register' them by entering them on the WAN page and I must wait until I can successfully PING them from an external network. Then I can set the WAN IP back to the one I want to use to administer the router. Then I can use those other IP's on the various Access Rules or Port Forwarding pages where there is a spot to enter 'alternate WAN IP address'. I'm trying to determine if this is true because I'm having a heck of a time getting port forwarding to work. My BIOS is 1.0.3.5.
View 7 Replies View RelatedCisco Application :: ACE4710 To Perform SSL End-to-end Configuration
May 31, 2012I am attempting to configure an ACE4710 to perform SSL end-to-end confguration. i.e. SSL termination - load balance - SSL initiate to backend server.The configuration appears to work fine in a test lab using any old web server, however when I peform the same configuration in the production environment it does not work. It appeatrs from a capture run on the ace that the ace is reseting the tcp connections after communicating with the back end server. The main difference I can think of in this environment is that the cert and key pair the ace is using where exported from the backend server, i.e. both the ace and the backend server have the same certificates and keys. Is this allowed? how to troubleshoot why the ace resets the connection.
View 6 Replies View RelatedCisco :: Switches That Can Perform Task Depending On Layer?
Jul 23, 2012I'm new and just entered in the world of studying my certification for Cisco, since I'm curious I see that there are switches that can perform task depending on the layer? I see some with specifics for Layer 2, some other for layer 3 and even some others with router capabilities!I know this is a rookie question but how do I know what the best switch for a network? or how can I identify them?
View 3 Replies View RelatedCisco :: 3200 Which Versions Of Windows Can Perform Best With Works
Aug 3, 2011We have 3200 logical devices configured on CiscoWorks and CiscoWorks is running very very slow. CiscoWorks installed on server with Windows Server 2003 32-bit and this version of windows it can only support RAM up to 4GB, which is already installed. In order to increase the RAM we have to upgrade the windows version as well. Which versions of Window can perform best with CiscoWorks. E.g. Windows Server 2003 with Service Pack 1 (SP1), Standard Edition 64-bit: or Windows server 2008 etc. We are currently using the LMS 3.2, RME 4.3.0, CM 5.2.1
View 2 Replies View RelatedPerform Linear Hashing In Databases On Given Values?
Dec 10, 2012how to perform Linear Hashing in databases on given values?
View 2 Replies View RelatedCisco :: Configure Multiple Next-hop Entries And Have It Perform Load Balancing?
May 2, 2012Can you configure multiple next-hop entries and have it perform load balancing?
Example
route-map test
match ip address test
set ip next-hop 1.1.1.1
set ip next-hop 2.2.2.2
Cisco Wireless :: Unable To Perform Image Recovery On 1231G
Mar 18, 2012I have an Aironet 1231G that I'm trying to recover an image on. I'm following the cisco directions of reloading the AP image file from an active TFTP server (which is myPC). My PC has a static ip address of 10.0.0.2 with the TFTP server running. I've verfied that the TFTP server works by upgrading a switch IOS.The issue I'm encountering is the 1231G does not see the TFTP server correctly. url...
View 2 Replies View RelatedCisco VPN :: Licensing Required To Perform Host Scan On ASA 5520
Apr 6, 2011I want to mark company owned laptops with a registry setting and have our ASA 5520 identify these systems when connecting via SSL and IPSEC remotely, and allow broader access to the internal network than the telecommuter that use their personal PCs. For the users that connect with their personal PCs, I want to only allow RDP access to their company PCs on the internal network.
Can I accomplish this with the current VPN Plus license and Anyconnect Essentials feature enabled? If not, what license/features do I need installed/ enabled to accomplish these objectives?
Cisco Switching/Routing :: Perform Initial Configuration Of 4900m Switch?
Jan 2, 2013I am slowly working my way though the setup and configuration of our new 4900m switch. The switch will have a pretty basic operational configuration. We are simply going to network 3 servers together through the swtich. Anyhow, I have been fallowing the guide at this site: [URL]
Basically the switch is brand new and I just setup things such as the clock, the banner, and the hostname. Anyhow, at various points in the guide such as the configuration of the telnet password and especially the interface gigabitethernet I get the "invalid input detected at '^' marker". I also did a show interfaces and noticed there was not any gigabitethernet interfaces but there was a
"FastEthernet1 is down, line protocol is down Hardware is Fast Ethernet for out of band management, address i"
Anyhow, my thinking is continuing on with the guide and at least try to setup the interface for the management port so I can then use the cisco network assistant gui to then configure the rest of the switch.
Cisco VPN :: ASA 9 / AnyConnect 3.1 - Failed To Perform Required Client Update Checks
Oct 31, 2012I upgraded to ASA 9, and asdm 7, everything went perfect except AnyConnect IKEV2 doesnt work anymore, I have a lot of errors under my event viewer:
When it goes to install I get this error: Failed to perform required client update checks. Contact your system administrator
Under Eventviewer I find:
Function: CDownloadTask::Run
File: .DownloadTask.cpp
Line: 413
[Code].....
Cisco Wireless :: Perform Site Survey With Aironet 1041N Access Point?
Jul 15, 2012We are in need to perform a site survey with the Aironet 1041N Access Point.
Upon reviewing the site survey software, it seems you need to use an Aironet adapter. However from what i can tell, all the Aironet adapters are PCMICA cards, which most modern laptops do not have, and the PCMICA cards that do exist don't have drivers for windows 7.
Are there USB adapters w/ Windows 7 drivers that can be used to perform a site survey?
Cisco Firewall :: ASA5520 / How To Use Network Object NAT To Perform Regular Dynamic PAT And Identity NAT
Jun 19, 2011this is ASA5520 associate with 8.4(1). very simple scenario , three ports: inside . outside . DMZ my problem is how to use network object NAT to perform Regular Dynamic PAT and Identity NAT.
for example, this is my configuration
**** first i configured Regular Dynamic PAT****
object network myinside
subnet 10.200.11.0 255.255.255.0
nat (inside,outside) dynamic interface
**** then , i met problem when i want to make identity NAT between inside and DMZ****
**** if i add below CLI , the first nat line will be replaced ****
**** SO IF I ADD THIS****
[code]......
Cisco Application :: How Does ACE Module Perform In Band Server Health Monitoring With 8312
Oct 14, 2012I have a VIP, which is listening on port 8312 in ACE LB and NO probes attached to it. In this scenario how does the ACE module perform the health monitoring ?
View 4 Replies View RelatedCisco Switching/Routing :: How To Perform UBRL User Based Rate Limiting On ASR1000
Mar 27, 2012how to perform UBRL User Based Rate Limiting on ASR1000 like we can do it on Catalyst6500?
View 3 Replies View RelatedCisco Switching/Routing :: 6509-E / Unable To Perform (ip Nat Inside Source Static Tcp Xxx Interface)
Jan 21, 2013Platform:
cisco6509-E with FWSM
Supervisor Engine 32 PISA 8GE
sup-bootdisk:s32p3-adventerprisek9_wan-mz.122-18.ZY2.bin
command:
(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
(config)#no ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
#clear ip nat tran *
(config)#ip nat inside source static tcp 10.10.8.147 14029 interface g7/8 14029
%Port 14029 is being used by system
Or %Static entry in use, cannot change
But when I perform "sh ip nat tran" command,There is nothing
Cisco Switching/Routing :: 3560 - Unable To Perform VLAN Routing
Apr 28, 2012We recently purchased Cisco 3560X Layer3 Switch. We need to perform simple Inter VLAN routing. We have configured VLAN1 (name-server_vlan) and VLAN2 (name- user_vlan). We have also assigned the Ports and IP address to both the VLANs. After assiging this if we plug Laptop A into VLAN1 then it doesnt communicates with Laptop B (btw, Laptop A is able to Ping VLAN2 Gateway ) in VLAN2 but on the other hand Laptop B is able to communicate with Laptop A and ping everything i.e. Gateway of VLAN1.
View 17 Replies View RelatedCisco Switching/Routing :: Perform STFTP On 3750 Or 3750-X?
Jun 30, 2012Do I need the Universal image to perform stftp on a 3750 or 3750-X?
View 8 Replies View RelatedCisco :: ASA 8.3 With ASDM 6.3 Show Log On ACL?
Jan 20, 2011I am trying to see what traffic goes through a certain ACL so I specify a protocol instead of allow all IP traffic. So what I did is enabled logging with debugging on that ACL. When I right click on the ACL and show log, nothing shows up. But I see hits on the ACL.
View 1 Replies View RelatedCisco :: ASA 5505 Asdm Access
Mar 28, 2012I have two identical ASA 5505. I can only access through https/asdm on one of the devices from same laptop. Below is the configuration of the ASA. My internal machine ip address 10.0.0.10/8. I have tried to remove and re-enter the "http" and "Crypto key" related command. Wireshark show "Alert (level: Fatal, Description: Handshake Failure)" right after I entered URL in browser-tried IE and Chrome. Java version should not be a problem as I can access the second ASA.
View 5 Replies View RelatedCisco Firewall :: 401 Forbidden On ASDM
Mar 21, 2010I can get to the untrusted certificate on https....coming from my address 192.168.133.205..but i get denied am i being denied by access list?..I dont see how since intital SSL begins..
these are the log from the ASA---10.11.24.11 is the ip of one of the contexts
interface GigabitEthernet0/1.124 vlan 124 nameif Inside security-level 100 ip address 10.11.24.11 255.255.255.0
http server enablehttp 0.0.0.0 0.0.0.0 managementhttp 0.0.0.0 0.0.0.0 Inside
Mar 22 2010 16:05:34: %ASA-6-725001: Starting SSL handshake with client Inside:192.168.133.205/24368 for TLSv1 session.Mar 22 2010 16:05:34: %ASA-6-725003: SSL client Inside:192.168.133.205/24368 request to resume previous session.Mar 22
[Code]....
Cisco Firewall :: ACL Not Showing In ASDM 7.1 (ASA 9.0)
Apr 30, 2013I've configured a couple of ACL rules via CLI in my ASA. When i checked in the ASDM, it only shows the basic rules that was configured by default and did not show the rules that i've created.
View 6 Replies View RelatedCisco VPN :: Asa 5520 8.4 And ASDM 6.4 Downgrade
Feb 23, 2012We are running ASA5520 with version 8.4(2)8 software and ASDM 6.4(5)205.We have noticed the following problems:When having more than 30 IPSec,sessions connected, the log fills up with errors "System is low on free memory blocks of size...", When filtering by "AnyConnect Client" in "Monitoring > VPN > VPN Statistics > Sessions" the values "Bytes Tx / Bytes Rx" column is presented in one line ie. "8450198968129194". Seems to be missing a <cr><lf>,When uploading a new CSD-image (via ASDM) all configuration för GPO, CP, DAP seems to dissapear, though, the config seems ok when looking at a sh run. Also, the newly updated csd-image doesn't show i ASDM.
View 2 Replies View RelatedCisco WAN :: Unable To Load ASDM 7.1
Feb 3, 2013I'm trying to access ASDM but everytime I put in the IP address I just get cannot display webpage: Here is the copy of my configuration
ASA Version 9.1(1)
!
hostname ciscoasa
[Code].....
Cisco VPN :: Unable To Access Pix 515 Via ASDM
Aug 31, 2011The history about this box is that they had access through the ASDM untill they changed the management interfaces to Vlan 50.
The pix firewall is 192.168.50.10 and my interface to my PC is on Vlan 10 which is 192.168.10.115. I can ping 192.168.50.10 but I am unable to access this through ASDM. I believe the pix is denying me.
When I look in the config i see the ASDM image and I see that they have http server enabled.
I see my network 192.168.10.0 as inside but I don't see 192.168.50.0.
Cisco Firewall :: ASDM Not Working With ASA 8.4
Jan 14, 2013I have recently upgraded ASA to 8.4 and found that ASDM is not working on it. I tried the latest ASDM version 7.1 still no luck. When I try to access ASA using IE...it just shows " Page can not be displayed "
Following is the config which I have
http server enable
http 0.0.0.0 0.0.0.0 inside
http 10.52.193.218 255.255.255.255 inside
asdm image disk0:/asdm-711-52.bin
asdm location 0.0.0.0 0.0.0.0 inside
asdm history enable
Is there anything else required in ASA 8.4 for ASDM to work? When I telnet to ASA interface with 443 port it works
Cisco Firewall :: 5505 Asdm From Outside
Sep 22, 2011im working on a small project on a asa 5505 and beacuse i do most of the work from the outsidei want to open up asdm without vpn.
i have it working on another asa and the only difference is the rom version.the one not working is 8.0(5) - 6.2(3) and the one working is 8.0(4) - 6.1(5) did they do some changes?