Cisco VPN :: 881 W Limit VPN Traffic From Single IP
Jul 27, 2011
I have just set up a 881W appliance for a satellite office. At this time, we don't need a site to site vpn. However, I have EZVpn configured on it and working great so that I can connect from our main office for admin purposes. How can I setup up a firewall rule/policy in order for only our main office IP to connect to Ezvpn? I don't want to allow access to the VPN from any other IP other than our IP at our main office.
View 2 Replies
ADVERTISEMENT
Nov 27, 2012
I am testing limit bandwith using my ASA 8.2, i am trying to limit internet access for certains users , i order to save Bandwith for the important things but i can´t get any limitation
My configuration is the following, the acces list is just for my pc in order to test, and the service policy is applied to outside interface (called internet in my case) for incoming traffic
access-list Internet_mpc_1 extended permit ip host 172.16.127.70 any class-map Internet-class-TEST match access-list Internet_mpc_1 policy-map Internet-policy-web class Internet-class-TEST police output 1024000 1500
service-policy Internet-policy-web interface Internet
With show service policy i can´t see any activity on the policy , but if i do a similar configuration for inside interface outgoing traffic i can see packets allowed and dropped
View 3 Replies
View Related
Nov 1, 2012
I am working on an ASA 5510 on 8.4 IOS and need to know how to limit icmp to just a single host? What I would like to do is be able to PING from the Inside interface 10.X.X.X to host 4.2.2.2 on the Outside, but thats it no other host would be PINGable.I tried MANY different access-list statements but the only way I can get icmp out and working is using the "fixup protocol icmp" but then everything is PINGable and the ASA does not block anything.
View 3 Replies
View Related
Mar 10, 2012
I have the attached setup. now i would like to limit my ftp transfer to 10 mb from a specific vlan to ftp server on the STM-4 (622) link. what would be the best way to limit ftp traffic to 10 mb .
following is my switch deatils
Video_Main#sh verCisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)Technical Support:
[URL]
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.All rights reserved. Certain components of Cisco IOS-XE software arelicensed under the GNU General Public License ("GPL") Version 2.0. Thesoftware code licensed under GPL Version 2.0 is free software that comeswith ABSOLUTELY NO WARRANTY. You can redistribute and/or modify suchGPL code under the terms of GPL Version 2.0. For more details, see thedocumentation or "License Notice" file accompanying the IOS-XE software,or the applicable URL provided on the flyer accompanying the IOS-XEsoftware.
[code]....
View 2 Replies
View Related
Dec 22, 2009
On router Cisco 881 with ZBF I have dedicated VLAN for AP connection. AP is getting IP address from router dhcp server, I would like to limit all access to Router "Self" zone to only DHCP traffic if possible. How to limit all traffic except DHCP to self zone?What ever I do to traffic to/from self zone I must always specify last statement as "class class-default/inspect" and not drop as I would like to.
View 5 Replies
View Related
Apr 20, 2011
Never seen a Cisco, or any other L3 switch before. Nor an Lx router. Any step by step,or class room or web based training, or a partner or Cisco helper to get us up to speed on this.Goal is to limit http and https traffic in favor of telnet to an AIX server and RDP to a Windows TS. Printing would be ahead of http/s and below the others.
Interstingly, the web site promises 9 videos, but there are only 8. The demo guide says about OoS: "Coming Soon".Where to go? Who(m) to call?
View 6 Replies
View Related
Nov 22, 2012
Is there anyway to limit a user's traffic volume on ASA8.4? if there is, how?
View 3 Replies
View Related
Feb 1, 2012
I have a private network behind a configured Cisco ASA 5510. I need to send data back and forth between a server on the inside network and a device on the outside network on port 44818. No amount of configuration is allowing this to happen. The packet tracer always fails on of the implicity "deny" rules, even though my other rule should explicitly permit it. I also realize I need to set up routing from my outside network to the inside network, but I cannot see from the documentation how to do that on this particular port without simultaneously breaking my outside connection.
The inside IP for the ASA is 192.168.25.1
The outside IP for the ASA 192.168.11.54
Here is my current configuration:
: Saved
: Written by enable_15 at 08:49:25.956 UTC Thu Feb 2 2012
!
ASA Version 8.2(5)
[Code]....
View 6 Replies
View Related
Sep 8, 2011
I would like to know if there is a way to apply in the Cisco asa 5510 traffic shaping not for a interface but a single IP address.For example i would like to limit the bandwith for the IP address of my FTP server.
View 4 Replies
View Related
Oct 20, 2011
I am using Cisco 3560 as distrubution switch and want to limit port 445 traffic on 1 MB and applied rate limit statment on Gi0/1 port but switch unable to limit said traffic.rate-limit output access-group 120 1024000 128000 128000 conform-action transmit exceed-action drop.
View 25 Replies
View Related
Dec 12, 2011
I have a question around pix 501 (6.3) configuration. I am trying to allow traffic from a single Citrix CAG across a variety of ports (80,443,9001-9005,27000,7279,1494,2598) from external (dmz) interface through to multiple addresses (on the same ports) on the internal (secure) network and dont know how to best approach it or if its possible. The only way I have found to allow traffic through is via Static Nat entries which I cant see will work for this requirement as we need some ports to be allowed into multiple addresses.
View 6 Replies
View Related
Mar 21, 2012
I am looking for step-by-step configuration on how to enable rate-limit and traffic shaping on Cisco 6513 vlan interfaces. I am not able to find this particular document on CCO.
View 3 Replies
View Related
Oct 29, 2012
Is it possible to configure a limit on monthly traffic over a 3G access on a Cisco 800 Series?
The scenario is that a customer has a Cisco 800 3G routers with a 3G card from a Service Provider, that offers a rate for X Mbytes per month and that when those monthly X Mbps are exceeded, a differente rate (much more expensive) is applied for the excess traffic that month. The customer would like to have the router NOT to active the 3G access when the X Mbytes (on that month) are exceeded. Maybe this is possible to implement using a TCL script and ip accounting?
View 1 Replies
View Related
Nov 5, 2012
We run a workers camp here and we currently have around 2500-3000 people using our 100MB internet pipe. We are upgrading the pipe to 200MB soon but I still would like to limit how much bandwidth everyone is using.
We allow streaming media such as Netflix, youtube, apple TV and of course .So it gets full pretty fast. We have QOS implemented although I wasn't here when it was done so I don't know a lot about it. I would like to limit IPs to a certain amount of bandwidth. [code]
View 1 Replies
View Related
Nov 29, 2011
We have 3 sets of applications. The first does not require much bandwidth but is very critical, the other two is more bandwidth consuming but less critical. I would like to know if it's possible to reflect this priorities on the router configuration. Is it possible to set the ports 10000, 10001 and 10002 of the external IP have higher priority to be handled, for example? Also, is it possible to limit the bandwidth that goes through a set of ports?
I must prevent the 2 sets of less critical applications to strugle the critical ones. What router can provide this capabilities? Is the 1921 able to do this job?
View 2 Replies
View Related
Dec 17, 2012
How do I limit broadcast/mulitcast traffic on a switchport to e.g. 5000 pps ? I don't want the port to shut down, just block or drop broadcast traffic that exceeds 5000 pps.
View 19 Replies
View Related
Jul 15, 2009
I use WS-C3560G-24TS and try both ios 12.2.50.SE1 and 12.2.46.SE but problem the same. The config as following,
interface GigabitEthernet0/1
no switchport
ip address 1.1.1.2 255.255.255.0
[code].....
but I find the int g0/1 output traffic only can achieve about 500kbps then I try config below,
interface GigabitEthernet0/1
no switchport
[code]....
I find int g0/1 output traffic only can achieve about 5Mbps,but if I change "srr-queue bandwidth limit xx" command xx to 20-90,the int g0/1 can achieve normal traffic bps, for example,
interface GigabitEthernet0/1
no switchport
[code]...
the int g0/1 output can achieve 2Mbps that is correct,just only when limit set to 10%,the traffic only can achieve half of limit bandwidth.
View 5 Replies
View Related
Aug 4, 2012
I am trying to limit the incoming and outgoing traffic on a l2 port to 8mbps for a ip subnet within the nexus 7000. The port is connected to my ISP router which has a bandwidth of 20mbps.Policing won't work on a l2 Port and shaping cannot be applied on a port level. url...I have been reading thru the qos guide for nexus release v6 and have problems understanding the different queues.
View 3 Replies
View Related
Sep 6, 2012
For my Lan, I have created two Vlan; Vlan 10 = for Users and Vlan 20 = For Database Servers,There are 15 Lan computer/laptop and 5 SQL database server (Dell Server) connected through same 24 port cisco 2960 switch. Means, 15 + 5 port occupied.
I have applied access list on cisco switch to restrict communication between vlan 10 and vlan 20.But My main purpose to create two Vlan is not for any kind of communication or restriction. My main Purpose is that Users traffic do not distrub or choke or affect the Database servers. then what will i need to do for that is VLAN Concept is sufficient for my concern OR I will need to buy seperate Cisco Switch to connect 5 database servers OR Else ?
View 9 Replies
View Related
Oct 28, 2012
I am planning to buy a router for my hotel and I would like to know is it possible to limit the bandwidth limit to the guests? And the admin computer can utilize the maximum speed? it it possible to create a login page paper when some one enters my wifi connection?
View 7 Replies
View Related
Oct 31, 2012
need to know the OSPF best design. I have a customer currently running their OSPF only in two area. Area 0 is provider reside and area 1 reside 700 hundred over of router including HQ router and remote branch router connecting to metro-E 10Mbps networks. Is this design have any weakness? Area 1 about 800 hundred router reside in, the HQ model is cisco router 7200 and remote end is cisco router 1841.Let's say they want a solution, for 3G remote router connect back to the HQ using Lease line with a fixed IP. Using DMVPN and OSPF communicating back to HQ. What should we aware when designing and implementing for the OSPF best practice. They have 700 hundred over remote branch need to terminate back to their HQ. I read cisco recommend an area should not be more than 50 router and per-area no more than 28 area.
View 4 Replies
View Related
Dec 11, 2010
We have cisoc 2821 at one of branch and created five sub inetrfaces for different vlans.Output of Show interface shows very frequent increase in the input error count.I have changed the physical cable and switch port on the other side.But still error rate is increasing.When the traffic is less error rate is low but with high traffic it is increasing drastically.My router process is very less(4%) only.What could be possible reason. [code]
View 8 Replies
View Related
Mar 10, 2011
We are looking to implement traffic shaping/policing primarily for P2P traffic. As natively the ASA5550 is only capable of p2p inspection if the traffic is tunneled via port 80 is the AIP-SSM the way forward? We have 2 5550s in active/active failover config. As a side note we are also looking to implement an IDS/IPS system so could this module cover all?Is this module going to provide the desired outcome or is there another module/device out there better suited for this? I would prefer to use the ASA5550s as opposed to implementing another product if only that we can make use of the investment we already made on these devices.
View 1 Replies
View Related
Apr 29, 2012
I have an ASA 5520 with the below config
Gi0/0: outside (Internet)
Gi0/1: inside (Internal users)
Gi0/2: DMZ (web servers, ftp, Mail etc..)
I have a SMTP relay deployed on the DMZ for mailing. I have also a mail servers installed in the internal lan,
I want to allow trafic from dmz to reach internal lan, and i want normally also allow stmp relay from dmz to reach Internet.
How can i block trafic from DMZ to reach Internal Lan (instead of smtp) if the to allow trafic from dmz to internet i must put ANY in the policy?
For allowing trafic from DMZ to reach Internet, the policy must be DMZ -----> ANY ----->Services., this policy means DMZ can implicity reach Internal Lan?
View 2 Replies
View Related
Mar 19, 2013
We have a Cisco 2811 running ITP IOS. On that router we run the SMPP service. A client on the network connects to this service, and we need to capture the traffic for debug.
I've tried traffic-export, but I cannot see any outbound traffic.I'm guessing that this is due to the fact that the outbound SMPP traffic is not transit traffic as it is generated by the router itself.
Is there any way to capture the outbound traffic?
View 4 Replies
View Related
Aug 4, 2011
I am trying to come up with the best way to traffic shape traffic with 3750 Me switches. the traffic will be coming from a 6504 Sup-7203b downstream and going out the wan. Core---L3---->6504--intvlan80--trunkport to--->3750Me---g/1/1/1-trunkport to---MetroE network--->int f0/0.80--branch router. The idea is to use the 3750 to traffic shape the traffic going towards the wan/branch to 500 to match the contracted rate and then to use qos on shaped rate. I tried to apply it to g1/1/1 using port based policies but it did not shape the traffic. I changed everything to IP interfaces and it worked. I need to break up the metroe into different vlans so I can bring branch offices in on different vlans.c
View 3 Replies
View Related
Aug 18, 2011
I am using ASA 5505 cisco firewall as a transparent firewall. I have assigned ethernet 0/0 as outside interface and ethernet0/1-7 as inside interface. There are 3 departments in office. So, i connected ethernet 0/1 to Dept A, ethernet 0/2 to Dept B and ethernet 0/3 to Dept C. Now, I want to limit bandwidth to each department, e.g, 1 Mbps download/upload to Dept A, 512 kbps download/upload to Dept B and 512 kbps download/upload to Dept C. So, how can i do this in ASA 5505.?
View 1 Replies
View Related
Jan 8, 2013
what would be the best method to limit some users/workstations from accesing the internet on a vlan that has access to the internet?
I was thinking of just creating a whole new VLAN for those few workstations that doesnt access the internet or using ACLs on the ASA.
View 2 Replies
View Related
Feb 23, 2012
I need to limit to some AD groups, authentication with ACS 5.3.For example, i need that only users os somedomain.com/users/test1 are authenticatet via ACS --> ADS.
View 1 Replies
View Related
Feb 25, 2012
If two (one 6509A 9/26 with server A located in A end, 6509B with serverB located in B End) which is connected via a 1G link. If there is serverA send 700M file to server B via a 1G link. If I configured below command to 6509A 9/26, can I limit the bandwidth of server on bothincoming and outgoing to 500M?
class-map match-all FROM-SERVERmatch access-group name FROM-SERVER!policy-map FROM-SERVERclass FROM-SERVERpolice 500000000 conform-action transmit exceed-action drop!interface GigabitEthernet9/26service-policy in FROM-SERVER
View 1 Replies
View Related
Feb 6, 2012
I have a 3845 Router with three connected interfaces, one to my WAN, one to my LAN and another to my wifi zone. I want to limit the amount of WAN bandwidth the WIFI zone can take to say a max of one third and not restrict WAN bandwidth from the LAN at all.
View 7 Replies
View Related
Apr 29, 2012
I have cisco 7600 core router in ISP , i want to put the bandwidth limit on it for outgoing traffic (for internet) on a subnet because i am using Bluecoat and i want to test my bluecoat.On this subnet i have no limit for bluecoat but after the bluecoat i want to limit it. On 7600 cisco router i have not rate limit command so how it can be possible for a perticular subnet ?
View 1 Replies
View Related
Mar 24, 2013
When we configure a SG 300-10 switch in layer 3 mode to do so some static routing, I would like to know the ARP table limit (association between IP address and MAC address) ? The documention talks about MAC (association between MAC and port) table limit, routing entries limit ... what about ARP limit ?
View 1 Replies
View Related
