Cisco VPN :: ASA 5505 / VPN IP Local Pool?
Jan 5, 2012
We are testing the upgrade from version 8.2 to 8.4 on an ASA 5505 and ran into a problem. For VPN connections we had pools created. A few of the pools were limited to a single IP address. After the upgrade the ASA rejects the pools that only had one IP address instead of a range. In the command line if you enter a question mark after typing in "ip local pool (pool keyword)" in config mode it says "Specify an IP address or a range of IP addresses:start[-end]" with the word "or" it sounds like it should except a single IP address but it doesn't. The error is "Please enter a valid IP address range."
View 5 Replies
ADVERTISEMENT
Mar 27, 2013
Is there any way to monitor and plot graphs against the data usage for each local pool configured on Cisco 7609. I have a CISCO 7609 that is acting as RAS for PPPoE Customers and have mulitple local pools (/24) configured on it. What is requried is a graph that shows data usage of each pool separately ( I can plot usage against each IP but that is not requried here, I need data usage (MRTG) for each complete local pool).
View 1 Replies
View Related
Sep 16, 2011
Is there any way to always assign the same IP address to an AnyConnect VPN client logged into an ASA 5505 running v8.4?2
View 2 Replies
View Related
Oct 4, 2012
I want to configure multiple DHCP configuration on ASA 5505. I tried to create sub interface for different IP Pool but it was not configure on ASA 5505. is it possible to create subinterface on ASA 5505?
ASA 5505 IOS version: 8.3(1)
License: Security Plus
View 4 Replies
View Related
Nov 13, 2011
I've configured vpn ipsec with wizard but my ip address assigned by pool not reach the lan network ,lan network: 192.168.0.0 /24,pool network: 193.168.0.0 /24
View 12 Replies
View Related
Feb 19, 2013
Im trying to configure remote access VPN on ASA5505. I configured it as local CA server, installed digital certificate on remote station and everything looks fine as far as i can see. I'm using cisco VPN client 5.0 on remote station. when i initiate VPN session it fails while trying to connect. Looks like im missing some configuration but i cannot figure out what it is. Currently i have firewall configured to use group authentication and everything works fine. I want to switch it to use certificate authentication, and if possible, confiure firewall to use main mode instead of aggressive mode for better security.
View 4 Replies
View Related
Jul 16, 2012
I am trying to configure a Cisco ASA 5505 so that users can authenticate via Radius or via a Local account using the Cisco AnyConnect client. In the AnyConnect Connection profile, the basic tab, it has Authentication Method. We have this going to an AAA server group with Use Local if Server Group fails option is checked.Each time, I see where the user has failed while attemtping to log in to the domain via the radius servers and thus bypasses the local user database all together.
View 3 Replies
View Related
Oct 18, 2011
i have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
View 13 Replies
View Related
Oct 24, 2011
I have an ASA 5505 i have uploaded updated clients to the ASA, when a user connects to remote.company.com either via the portal or an existing Anyconnect installation, vpndownloader downloads the new client to the machine and installs it.
My question is, where does it store the new installer on your local machine?I tried searching, but i just get a bunch of crap of where to illegally download anyconnect, instead of anything useful.
View 2 Replies
View Related
Jan 19, 2012
i have configuration my network infrastructure with the asa5505 like on image. i want that my users from lan 10.13.10.0/24 can to access to my LAN 192.168.0.0/24. can i use just routing or i must to use site to site VPN. how can i do it? how configure my asa 5505.on my LAN1 there's DHCP. From LAN side of my asa5505 i must disable DHCP.In my LAN1 i have DNS,Domain Controller. The users from my LAN3 need to access to LAN1 because of authentication and access to resources and programs. i attached my picture with configurtion.
View 2 Replies
View Related
Jun 10, 2012
I need configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.I have attempted to configure rdp access but it does not seem to be working for me. How to modify my current configuration to allow this? I need to allow the following IP addresses to have RDP access to my server: [code] The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. My configuration file and what are the commands i need in order to put this through. Also, if there are any bad/conflicting entries. Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course.Also the bolded lines are the modifications I made but that arent working. [code]
View 8 Replies
View Related
Oct 17, 2012
what is the minimun privilege level to assign at username account on ASA 5505 to grant the access with AnyConnect?
username ... privilege ?
View 4 Replies
View Related
Mar 30, 2011
I like the ASA 5505 for SMB and Home Offices very much, but I'm missing sadly a DNS Server or at least the ability of the DHCP Server to use static addresses for certain MAC's. In SOHO's the ASA is the only thing always powerded on and often even a Server where a DNS Server could be installed is missing.So is there a chance to see such a feature (DNS Server and/or static DHCP) in the next SW Release? how name resolution in a small LAN can be done without a local DNS Server?
View 3 Replies
View Related
Jul 24, 2012
I have, what I believe to be, a simple issue - I must be missing something. Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209). There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off. The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue. Basically, the VPN is up and running but PC 10.51.253.210 cannot get out
ASA Version 7.2(4)
!
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
[Code]...
View 2 Replies
View Related
Dec 15, 2011
We've a Cisco ASA 5505 connected directly to Verizon FiOS Circuit (ONT) box using Ethernet cable. As per the existing documention that I have, the previous configured this as a dedicated router to establish a seperate VPN connection our software provider. They assigned both Public Static and Local Static IP address. When I try to ping the public IP address, it says request time out; so the public IP address is no longer working.
When I ping the local IP address of 192.168.100.11, it responds. The SolarWind tool also shows Always UP signal. How can I login into this router either from remotely or locally to check the configuration, backup and do the fimrware upgrade?
I also tried to connect my laptop directly to the ASA 5505 router LAN port. After 3 minutes, I'm able to connect to Internet without any issues. However I don't know the IP address to use to login.
View 3 Replies
View Related
Mar 14, 2011
How i can use both LDAP Authentication and local user database to authenticate the remote vpn clinet in asa 5505?
when i try to do the things either only one method is working both are not working at a time.
View 3 Replies
View Related
Apr 11, 2011
I'm having trouble setting up local LAN (reach inside network when VPN connected) and Internet access (reach internet when VPN connected) for my VPN CLients when they are connected to my VPN, They can connect, no problem there, but I can't reach any resources when connected. My pings time out, both to my inside network and to public ip adresses, the only thing I'm able to ping is my ASA (172.16.30.1), and I don't se any routes under "Status/Statistics/Route Details" in my cisco VPN Client (when connected).
Here's my config
ASA Version 8.0(3) !hostname KardesASAdomain-name default.domain.invalidenable password XXXX encryptednames!interface Vlan1 nameif inside security-level 100 ip address 172.16.30.1 255.255.255.0 !interface Vlan10
[Code]....
View 14 Replies
View Related
Aug 7, 2011
We are using several Cisco ASA 5505 with the 8.05 OS on it. The problem is that the SMTP traffic of my ISP(Telenet) isn't passtrough the ASA, I'm using outlook 2010. Before there was also a problem with our local exchange server but I solved this by disabling ESMTP checking in the policies, but it didn't worked for my local ISP.
View 4 Replies
View Related
Apr 28, 2011
I am trying to configure an ASA 5505 running 8.3 to allow a priv 15 local user to be able to ssh into the device and be placed into priv 15 mode without having to execute the enable command and type the enable password.Right now when you log in as a priv 15 user you still have to execute the enable command and type the enable password to get to priv 15.
View 3 Replies
View Related
Oct 4, 2012
I am configuring remote access vpn on ASA5505.Everything is working fine so far, except when the client got connected, it still used the local DNS server provided by the ISP. How do I force the client to use the DNS server configured on ASA?
View 7 Replies
View Related
May 4, 2013
I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error: [code]
View 3 Replies
View Related
Jan 13, 2013
I have a Cisco ASA 5505 that I've setup with an SSL VPN. This is for personal use, and I therefore don't have need for anything more than local authentication. [code]
I'd like to have one profile/policy where I only encrypt data going to my split-tunnel ACL, and I'd like to have one profile/policy where I encrypt all traffic.
The issue ive been fighting is - it doesn't seem like its possible to associate more than one group policy per user. If it IS possible - can you tell me how I associate both groups to my local account?
View 1 Replies
View Related
Mar 3, 2013
I ran into a very interesting problem that occurred today and I'm trying to figure out why it happened. If it was one ASA 5505 that just required the reboot, then I'd have just chalked it up to a glitch, but when we built a new AD/ DNS server on the main network at the main site and changed the 3 Remote site ASAs to point to the new DNS server in the DHCPD options, none of them could ping any local host names to the DNS server at the main site they were now pointing too, but external host names { URL} all translated and pinged fine.
From a laptop on one of the remote sites, we could ping the new AD/DNS server(192.168.0.3) and the old AD/DNS server(192.168.0.2) and everything else at the main site, and telnet to port 53 showed successful across the Easy VPN from the Remote site to the new server at the main site. When wire shark was added to the new DNS server at the main site, the DNS request and replies for {URL}, for example, came and worked fine, but any requests for local resources never made it to the server from the remote sites.
A reboot of one of the Remote Site ASA's corrected the issue. Then I rebooted the other two remote site ASAs, and now DNS was working fine for everybody. I had also tried clearing the ARP cache on the ASAs before resorting to rebooting them. I also tried rebooting the laptop thinking the local DNS cache needed cleared before resorting to rebooting the ASAs. I'm struggling to understand why external, public host names made it through and resolved from the remote sites to the new server at the main site, but anything local failed before even reaching the new server(The new DNS server could resolve requests made by computers at the main site, but the remote sites that traverse the Easy VPN from the ASAs failed). The new AD/DNS server is the only server configured for DNS for all remote site computers.
Is any of this making sense? I'm wondering if clearing the x late or local host tables would have corrected it without having to reboot. I'm just trying to grasp the understanding here and figure out what happened.
View 5 Replies
View Related
Jul 28, 2011
I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.
View 5 Replies
View Related
Jul 17, 2012
I am using a range of IPs from my inside LAN for my IPSec VPN clients. For example my inside network is 172.16.1.0/24 and I have a pool setup like this: ip local pool vpnpool 172.16.1.200-172.16.1.210 mask 255.255.255.0.
Before the upgrade to 8.4 it was working and now it isn't. Clients can connect and pickup and IP but can't cominuicate with the inside LAN. I think I have to do manual NAT to nonat this range. So I want to try the following:
object network obj-vpnpool range 172.16.1.200 172.16.1.210 nat (inside,outside) 1 source static any any destination static obj-vpnpool obj-vpnpool
However there are two things preventing me from doing this:
1) When I try to create obj-vpnpool I get an error stating that this object overlaps with local pool
2) Even if I create the obj-vpnpool with a non-overlapping range, when in the VPN config I don't have an option for selecting obj-vpnpool.
View 14 Replies
View Related
Feb 27, 2013
ON ASA, I understand that we can assign a static IP for a specific VPN client, or we can use a DHCP pool to assign IP. Now if I want to create DHCP pools, say pool_A and pool_B, for user A, B and C they use the IP from Pool_A, and user D, E, and F they get the IP from pool_B. Is there a way to do this in ASA?
View 4 Replies
View Related
Aug 7, 2011
I have Remote Access VPN users (IPsec) who are terminated on Cisco ASA 5520 (v8.2). For those users, AAA is done on the ACS. Group-policies and tunnel groups are defined on ASA. Initialy I had all VPN users defined on ASA and group policies were associated with each user. Each group policy had it’s own IP pool for users. Now, I moved users to ACS. How can I associate group policy, defined on ASA, with users group defined on ACS? Is it possible that ACS send to ASA information about IP pool for different group policy? Users will use ONE vpn profile BUT based on the Active Directory group they belong to they obtain a different IP address for each group.Can it be done ? ACS version is 5.2.
View 1 Replies
View Related
Jul 25, 2012
We have the configuration below set up in a 3560 switch (addresses and names modified for privacy). We are running out of dynamic IP’s in the current pool (6.35.159.0 – 6.35.159.255). We have a new set of IP’s that we can use (6.44.56.0 – 6.44.57.255 – an additional 512 addresses). Although I can figure out the commands to add a new dhcp pool, secondary subnet, etc., I’ve never done this before so I’m not sure of everything I need to do. The end result I need is that the 3560 needs to be able to hand out IP addresses from the current and new pool to anything connecting to vlan 300 – our datanet where computers access the Internet. What I need to do as far as modifying the vlan, adding the secondary subnet, defining helper IP’s, gateways, whatever, so that computers connecting via vlan 300 have Internet access via either of the pools? I have been told that all I need to do is create the pool, but not sure if that is correct...
[code]....
View 3 Replies
View Related
Sep 30, 2012
Is it possible to create an ip address pool for ip address assignment in ACS 5.3, like it used to be possible in 3.x and 4.x?
View 2 Replies
View Related
Nov 27, 2012
How do we setup ip pools in freeradius?
View 1 Replies
View Related
Oct 3, 2012
I am configuring IPSec Remote Access VPN on a ASA 5505. There are one external interface and one internal interface configured on the device. Internal interface connected to subnet 192.168.1.0/24.en VPN client get connected, I would like to assign the IP from some subnet(for example 192.168.2.0/24) other than the current internel subnet (192.168.1.0/24), but the VPN client can still access to 192.168.1.0/24. Is there a way to do this?
View 2 Replies
View Related
Nov 19, 2012
We have a WLC 5500 connected to a 2960 acting as core switch. there is a server attached to the switch , bearing all dhcp pools for lan and wireless users. Can the wlc or the switch be configured in such a way that the wireless users associating to the wlc get their ip addresses from the dhcp pool configured on the server. Can the configuration can be shared for such a setup.
View 5 Replies
View Related
Nov 27, 2012
Can the Nat Pool be on a different network that the load balanced vip? My current design uses nat pool on the same network, but the archatect wants the NATs on seperate VLAN.I will be developing on ACE MOD20, but the final configuration will be on 4710.
View 3 Replies
View Related
