Cisco VPN :: ASA5500 / Secure Desktop With SSL VPN?
Oct 1, 2012
What benefits does the Cisco Secure Desktop bring to customers running ASA5500-SSL-250= user license on the ASA? This is not Anyconnect. This is just regular clientless SSL VPN. I am particularly interested in anti-virus/anti-spyware compliance. Is this available with the base version of CSD? How does this endpoint control work? Can endpoint control detect that an O/S antivirus is not up to date and then block this device from accessing the VPN? If it can, how is this configured? note I am not asking about the additional Advanced endpoint control license. Just basic Cisco Secure Desktop download.
View 1 Replies
ADVERTISEMENT
Oct 16, 2012
Is Cisco secure desktop free and available for download on Cisco's download site? Is host scan part of the package? I just purchased an AnyConnect license for my ASA (ASA5500-SSL-250=) and would like to know how to get Cisco Secure desktop and more specifically if host scan comes with CSD.
View 1 Replies
View Related
May 26, 2013
we noticed that the Cisco Secure Desktop / Hostscan is not working with Internet Explorer 10 on Windows7/Windows8.
As described here, the SSL VPN is/should working but no documentation about Cisco Secure Desktop / Hostscan. url...It's a Cisco ASA5520 with the lates release.
- ASA Version 9.1(2)
- ASDM 7.1(3)
- Cisco Secure Desktop csd_3.6.6249-k9.pkg
- Hostscan hostscan_3.1.03104-k9.pkg
View 5 Replies
View Related
Feb 2, 2011
we have just done 2 upgrades on our asa 5510...
1. we upgraded our 5510 ASA firmware from 6.21 to 6.41
2. we also upgraded to the latest csd package (we have upgraded from 3.5.841 to 3.5.2008)
after 2 reloads, it seems that all my prelogin policies are gone ,i try enable / disable CSD and it just don't go back...i only have the default policy
what can i do to bring them back ?
View 2 Replies
View Related
Jan 24, 2012
My customer has 1000 SSL VPN users license on ASA5540 and i want to know the impact of deploying secure desktop on the ASA resources "processor , memory ... etc)
View 1 Replies
View Related
Jul 8, 2011
How to secure router on my mac - neighbor tapping into my internet service. How do I secure my Linksys router so only my laptop, desktop and iPad can use it? I tried going to 192.168.1.1 but got nothing?
View 5 Replies
View Related
Jul 12, 2011
When setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies
View Related
Mar 3, 2013
Does any one advise the current ASA 5510 is going to EOS ?
View 1 Replies
View Related
Feb 5, 2013
I have an issue with Netflow that I have been unable to solve. I have an ASA5510 that is sending netflow data to a FogLight NMS and it works fine until I reboot the server. After the server is rebooted, the flows no longer are received until I reload the ASA. Once the ASA is rebooted, flows work fine. I can remove and reconfigure the netflow configuration on the ASA and that will start the netflow again, but that is painful.
Is there any way to easily stop/restart or re-initiate the netflow from the ASA easily?
View 2 Replies
View Related
Oct 31, 2011
Using any computer and AnyConnect, I can connect to our network via ASA5500. But when I use Cius or iPAD, I always get a No License error message.
View 3 Replies
View Related
Apr 10, 2011
I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
View 4 Replies
View Related
Feb 24, 2013
ASA-5510, inside, outside, and some DMZ.Some services published with Static NAT - no problem.Now we need to add a second outside connection, with a second provider.Internet navigation only through the first provider (default gateway to the provider router "A").I need to publish some services ALSO through the second provider, ensuring the accessibility of both public IP addresses.I can set up the second NAT on the second interface, but the answer is ONLY to the first IP (the ISP "A", where I have the default gateway).By Cisco manual, it seems that there is a "lookup route" automatic with the return route of NAT, but it does not work.
View 6 Replies
View Related
May 5, 2013
Should we active IPS feature in ASA 5500-x by useing license?in the 5500-x ordering guide:IPS is only sold as ASA-IPS combo SKUs i.e., one cannot add IPS service as an option on top of ASA SKU. For example, if IPS service is desired on ASA 5515-X appliance, the relevant SKU is ASA5515-IPS-K8 or ASA5515-IPS-K9.But my customer has actived it by using the ASA5525-IPS-SSP on ASA5525-K9.
View 2 Replies
View Related
Feb 27, 2011
I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies
View Related
Jul 24, 2012
I am designing wireless controller solution for one of our customer network with Cisco 5500 series controller, wireless client authentication part.
1. There are 25 departments around the campus, each will be given one or two access points.
2. One Cisco AIR-CT5508-50-K9 Controller shall be used.
3. Single SSID/ VLAN shall be used for entire campus.
4. Wireless Authentication credentials used by one department shouldn’t work for other department
View 7 Replies
View Related
Feb 4, 2012
Recently i have configured ASA5550 with 2 Contexts in Transparent mode. Traffic can pass through a single Firewall context but through both contexts it couldn't.
View 0 Replies
View Related
Jun 27, 2011
I am using ASA5500 series box which has a site to site tunnel terminated on it.Is there any command by which we can check the up time of the tunnel.
ASA# sh isakmp sa
Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 1
1 IKE Peer: x.x.x.x Type : L2L Role : responder Rekey : no State : MM_ACTIVE
View 2 Replies
View Related
Mar 2, 2012
I would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
View 12 Replies
View Related
Jul 17, 2012
It's a problem about access ASA5500 Firewall mangement port. The customer request access ASA5500 by entering the default IP address https://192.168.1.1 to monitor data tracffic in Windows 7. But after entering the default IP in IE, no any page appear.
But that way can access ASA5500 magement port successfully in Windows XP. What the different between Windows 7 and Windows XP? Is there any way or any patch can access ASA5500 manemeng port in Windows 7?
View 4 Replies
View Related
Mar 9, 2011
I have configured Remote Access VPN on an ASA5500 Firewall. I am able to login normally and Ping Internal servers on the LAN. However, The servers cannot ping my IP address that i am taking from the RAVPN Pool. So it is a one way communication.
View 2 Replies
View Related
Jun 20, 2012
I currently have a problem with connecting to some CIFS shares on a EMC NAS. I have created some bookmarks for those shares to be used via the client less SSL VPN portal. I have also setup SSO which works properly for web-bookmarks and RDP stuff but not for the CIFS shares.
When I try to access those shares I'll always get a "authentication failed" error message. Afterwards a new log in-box is displayed. I have been able to log in to those shares by using the user-ID prefixed with the domain name [URL]. Log in fails when using only the user-ID or for example DOMAIN user-ID. I have also tried with a share on a different Server (windows2008 R2) which works without any problems.
View 1 Replies
View Related
Dec 26, 2011
I have a large quantity of ASA5520's and ASA5540's that need to be quickly assessed and RTV'd (if need be) if they are found to be upgraded ASA5510's.
My concern is because of this recent release-note by Cisco: [URL]
Is there a way to check the amount of DIMM slots on a unit through console or do I have to physically check each and every one?
View 2 Replies
View Related
Sep 19, 2011
I was wondering if it is needed to license the IPsec VPN clients in the ASA5500 firewalls...I know that you have license the SSL VPN peers (AnyConnect). I am almost sure that for the IPsec you don't have to.
View 1 Replies
View Related
Jan 10, 2012
I am attempting to port-forward on an ASA 5500 to internal host .100. The outside interface recieves its IP via DHCP. Packets are being denied so I ran packet-tracer and get the following error from outside to ssh port on internal host.
#packet-tracer input outside tcp 79.x.x.x 1025 71.x.x.x ssh
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
[Code]...
View 7 Replies
View Related
Sep 20, 2012
I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies
View Related
Feb 6, 2012
We have problems on central firewall with restricting traffic coming from remote office from IPsec. (The network sheme is attached) All branch offices are connected to central asa though IPsec. The main aim is to rule access from branch offices only on the central firewall, NOT on each IPsec tunnel According to the sheme:172.16.1.0/24 is on of the branch office LANs10.1.1.0/24 and 10.2.2.0/24 are central office LANThe crypto ACL looks like permit ip 172.16.1.0/24 10.0.0.0/8 the aim is to restrict access from 172.16.1.0/24 to 10.1.1.0/24 When packets are generated from host 10.1.1.10 to 172.16.1.0/24 all is ok - they are dropped by acl2 When packets are generated from 172.16.1.0/24 to 10.1.1.10 they are not dropped by any ACL - the reason is stateful firewall - traffic bypasses all access lists on a back path I thought that TCP State Bypass feature can solve this problem and disable stateful firewall inspection for traffic coming from 172.16.1.0/24 to 10.1.1.0/24, but it didn't work.The central asa 5500 is configured according to cisco doc [URL]
access-list tcp_bypass_acl extended permit tcp 172.16.1.0 255.255.255.0 10.1.1.0 255.255.255.0
!
class-map tcp_bypass_map
description "TCP traffic that bypasses stateful firewall"
match access-list tcp_bypass_acl
[code].....
View 4 Replies
View Related
Feb 28, 2012
I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
View 6 Replies
View Related
Dec 19, 2011
We have several RV082s here which are intended to connect to a central ASA5510 firewall. The VPNs are configured and do work basically, however in our test environment the RV082s kept crashing after an apparently unpredictable amount of time (sometimes after several days or even weeks). All the RV082 have the newest firmware installed (v4.1.0.02-tm).
When further investigating the issue, I found out that the crashes can be reproduced when enabling the keep-alive option on the RV082. When powering up the RV082, they boot, start up the VPN, and then they crash a few seconds after the tunnel has been established (one or two pings usually get through). When crashing, the RV082 becomes completely unreachable, ie no ping, no webinterface etc.
There is a note in the firmware release notes saying that enabling the keep-alive option would not work the way it should. However it seems that enabling that option lets the router completely crash after its next reboot. This makes the keep-alive option basically worthless, however we need this since the routers will get installed at remote sites with no personnel available there.
Is there any way to enable the keep-alive option without making the routers crash immediately after startup?
View 3 Replies
View Related
Mar 6, 2011
We have ASA5500's deployed for remote access concentration.We use Cisco IPsec vpn client with a group policy the chacks for Network ICE BlackIce ersonal firewall.The powers-that-be wish to change to McAfee presonal Firewall ok..Now the Group Policy allows you to check for several pre- configured Firewalls, Cisco Integrated, Sygate, Zone Labs etc.So as McAfee are no listed then I am to assume we go for "Custom Firewall" and this is where I am struggling.To configure checking for a Custom Firewall I must have the Vendor ID and the Product ID.McAfee haven't the faintest idea what we're talking about when we ask them for these details.Or is there a way to extract them from the registry of a machine with the McAfee product installed?
View 3 Replies
View Related
Jun 23, 2012
I have a Vostro 460 desktop, recently bought, and then realized it would be better to add wireless router. Bought router and a PCIe wireless mini card that was suggested for my PC on Dell order site. The card arrived and am trying to install. The end plate with the aerial socket is not compatible with the removable access blanks in rear of case. Have I been sent an incorrect or unsuitable card, or is there some trick or adapting needed to install this card?
View 3 Replies
View Related
Mar 16, 2013
I want to know how can I secure the network, I would like to know a complete schema of the insfrastructure, in other words, how to build a network with 4 vlans, firewall? one vlan will be for admin area personal other vlan will be for wifi access secure with password, not everybody will have access to it the other vlan will be for a small personal with at least 20 people. What will be the proper way to build the topology from this hardware that I have shown or with a new hardware. If it is another hardware, what can I use to secure it with vlans ?? This is a small office branch network that as you can see, one switch is on the floor.
View 2 Replies
View Related
Apr 20, 2012
setting up my D-link Di 614 so that when i make my internet connection wi-fi my neighbours cannot use it?
View 4 Replies
View Related
Jul 14, 2012
I need to secure the wi fi and I'm not sure how to do it.
View 1 Replies
View Related