Cisco Firewall :: ASA5500 Going To Eos
Mar 3, 2013Does any one advise the current ASA 5510 is going to EOS ?
View 1 Replies
ADVERTISEMENT
Cisco Firewall :: Can Connect To Network Via ASA5500
Oct 31, 2011Using any computer and AnyConnect, I can connect to our network via ASA5500. But when I use Cius or iPAD, I always get a No License error message.
View 3 Replies View RelatedCisco Firewall :: ASA5500 Add A Second Outside Connection With Second Provider
Feb 24, 2013ASA-5510, inside, outside, and some DMZ.Some services published with Static NAT - no problem.Now we need to add a second outside connection, with a second provider.Internet navigation only through the first provider (default gateway to the provider router "A").I need to publish some services ALSO through the second provider, ensuring the accessibility of both public IP addresses.I can set up the second NAT on the second interface, but the answer is ONLY to the first IP (the ISP "A", where I have the default gateway).By Cisco manual, it seems that there is a "lookup route" automatic with the return route of NAT, but it does not work.
View 6 Replies View RelatedCisco Firewall :: Active IPS Feature In ASA5500-X?
May 5, 2013Should we active IPS feature in ASA 5500-x by useing license?in the 5500-x ordering guide:IPS is only sold as ASA-IPS combo SKUs i.e., one cannot add IPS service as an option on top of ASA SKU. For example, if IPS service is desired on ASA 5515-X appliance, the relevant SKU is ASA5515-IPS-K8 or ASA5515-IPS-K9.But my customer has actived it by using the ASA5525-IPS-SSP on ASA5525-K9.
View 2 Replies View RelatedCisco WAN :: ASA5500 Transparent Multi Mode Firewall
Feb 4, 2012Recently i have configured ASA5550 with 2 Contexts in Transparent mode. Traffic can pass through a single Firewall context but through both contexts it couldn't.
View 0 Replies View RelatedCisco Firewall :: Schedule Automatic Backups Of ASA5500
Mar 2, 2012I would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
Cisco WAN :: Possible To Access ASA5500 Firewall Management Port
Jul 17, 2012It's a problem about access ASA5500 Firewall mangement port. The customer request access ASA5500 by entering the default IP address https://192.168.1.1 to monitor data tracffic in Windows 7. But after entering the default IP in IE, no any page appear.
But that way can access ASA5500 magement port successfully in Windows XP. What the different between Windows 7 and Windows XP? Is there any way or any patch can access ASA5500 manemeng port in Windows 7?
Cisco Firewall :: Identify ASA5500 With A Single DIMM Slot?
Dec 26, 2011I have a large quantity of ASA5520's and ASA5540's that need to be quickly assessed and RTV'd (if need be) if they are found to be upgraded ASA5510's.
My concern is because of this recent release-note by Cisco: [URL]
Is there a way to check the amount of DIMM slots on a unit through console or do I have to physically check each and every one?
Cisco Firewall :: ASA5500 - AnyConnect Vs IPsec VPN Client Licensing
Sep 19, 2011I was wondering if it is needed to license the IPsec VPN clients in the ASA5500 firewalls...I know that you have license the SSL VPN peers (AnyConnect). I am almost sure that for the IPsec you don't have to.
View 1 Replies View RelatedCisco Firewall :: Resolving Drop During Port Forwarding On ASA5500
Jan 10, 2012I am attempting to port-forward on an ASA 5500 to internal host .100. The outside interface recieves its IP via DHCP. Packets are being denied so I ran packet-tracer and get the following error from outside to ssh port on internal host.
#packet-tracer input outside tcp 79.x.x.x 1025 71.x.x.x ssh
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
[Code]...
Cisco Firewall :: ASA5500-x Bandwidth Control Based On Different Users And Applications
Sep 20, 2012I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications
View 1 Replies View RelatedCisco VPN :: ASA5500 Remote Access Group Policies IPsec Client Firewall
Mar 6, 2011We have ASA5500's deployed for remote access concentration.We use Cisco IPsec vpn client with a group policy the chacks for Network ICE BlackIce ersonal firewall.The powers-that-be wish to change to McAfee presonal Firewall ok..Now the Group Policy allows you to check for several pre- configured Firewalls, Cisco Integrated, Sygate, Zone Labs etc.So as McAfee are no listed then I am to assume we go for "Custom Firewall" and this is where I am struggling.To configure checking for a Custom Firewall I must have the Vendor ID and the Product ID.McAfee haven't the faintest idea what we're talking about when we ask them for these details.Or is there a way to extract them from the registry of a machine with the McAfee product installed?
View 3 Replies View RelatedCisco :: Netflow Restart On ASA5500
Feb 5, 2013I have an issue with Netflow that I have been unable to solve. I have an ASA5510 that is sending netflow data to a FogLight NMS and it works fine until I reboot the server. After the server is rebooted, the flows no longer are received until I reload the ASA. Once the ASA is rebooted, flows work fine. I can remove and reconfigure the netflow configuration on the ASA and that will start the netflow again, but that is painful.
Is there any way to easily stop/restart or re-initiate the netflow from the ASA easily?
Cisco VPN :: ASA5500 How To Get Secure Desktop
Oct 16, 2012Is Cisco secure desktop free and available for download on Cisco's download site? Is host scan part of the package? I just purchased an AnyConnect license for my ASA (ASA5500-SSL-250=) and would like to know how to get Cisco Secure desktop and more specifically if host scan comes with CSD.
View 1 Replies View RelatedCisco VPN :: ASA5500 / Secure Desktop With SSL VPN?
Oct 1, 2012What benefits does the Cisco Secure Desktop bring to customers running ASA5500-SSL-250= user license on the ASA? This is not Anyconnect. This is just regular clientless SSL VPN. I am particularly interested in anti-virus/anti-spyware compliance. Is this available with the base version of CSD? How does this endpoint control work? Can endpoint control detect that an O/S antivirus is not up to date and then block this device from accessing the VPN? If it can, how is this configured? note I am not asking about the additional Advanced endpoint control license. Just basic Cisco Secure Desktop download.
View 1 Replies View RelatedCisco VPN :: ASA5500 Static Address For Vpn User
Apr 10, 2011I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
Cisco AAA/Identity/Nac :: ASA5500 / ACS 5.1 Radius For VPN And Admin?
Feb 27, 2011I am trying to configure ACS 5.1 to authenticate SSL VPNs on an ASA5500 and aslo to provide admin access to the ASA5500 both via radius.I want to authenticate the VPN against a SeureID appliance and the admin login against a different database (using internal for testing but will use LDAP in the end).I cant seem to get the ACS to distinguish between the two authentication types. If I create a rule that says match protocol radius I can point that at either database but if I try saying match radius and service type 5 it doesnt match the VPN and falls through to the default authentication service. I have also tried matching service type 6 for admin and that doesnt seem to work either.In the end what I want to acheive is to authenticate teh ASA5500 VPN against the SecureID appliance and then admin access to all devices on teh newtork (a mixture of Cisco, F5 and Juniper) to active directory via LDAP where if the user is a member of the "admin" group they get access.I was intending to use specific devices for the ASA5500s (there aretwo) and then creat a device group based on IP address range for everything else.
View 4 Replies View RelatedCisco :: ASA5500 - Wireless Client Authentication Using ISE
Jul 24, 2012I am designing wireless controller solution for one of our customer network with Cisco 5500 series controller, wireless client authentication part.
1. There are 25 departments around the campus, each will be given one or two access points.
2. One Cisco AIR-CT5508-50-K9 Controller shall be used.
3. Single SSID/ VLAN shall be used for entire campus.
4. Wireless Authentication credentials used by one department shouldn’t work for other department
Cisco VPN :: ASA5500 / Command To Check Tunnel Up-time?
Jun 27, 2011I am using ASA5500 series box which has a site to site tunnel terminated on it.Is there any command by which we can check the up time of the tunnel.
ASA# sh isakmp sa
Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 1
1 IKE Peer: x.x.x.x Type : L2L Role : responder Rekey : no State : MM_ACTIVE
Cisco VPN :: Inside LAN Cannot Ping RAVPN Client On ASA5500
Mar 9, 2011I have configured Remote Access VPN on an ASA5500 Firewall. I am able to login normally and Ping Internal servers on the LAN. However, The servers cannot ping my IP address that i am taking from the RAVPN Pool. So it is a one way communication.
View 2 Replies View RelatedCisco VPN :: SSO On CIFS Shares For Clientless WebVPN ASA5500
Jun 20, 2012I currently have a problem with connecting to some CIFS shares on a EMC NAS. I have created some bookmarks for those shares to be used via the client less SSL VPN portal. I have also setup SSO which works properly for web-bookmarks and RDP stuff but not for the CIFS shares.
When I try to access those shares I'll always get a "authentication failed" error message. Afterwards a new log in-box is displayed. I have been able to log in to those shares by using the user-ID prefixed with the domain name [URL]. Log in fails when using only the user-ID or for example DOMAIN user-ID. I have also tried with a share on a different Server (windows2008 R2) which works without any problems.
Cisco VPN :: ASA5500 / TCP State Bypass For Traffic - Coming From IPsec Tunnel?
Feb 6, 2012We have problems on central firewall with restricting traffic coming from remote office from IPsec. (The network sheme is attached) All branch offices are connected to central asa though IPsec. The main aim is to rule access from branch offices only on the central firewall, NOT on each IPsec tunnel According to the sheme:172.16.1.0/24 is on of the branch office LANs10.1.1.0/24 and 10.2.2.0/24 are central office LANThe crypto ACL looks like permit ip 172.16.1.0/24 10.0.0.0/8 the aim is to restrict access from 172.16.1.0/24 to 10.1.1.0/24 When packets are generated from host 10.1.1.10 to 172.16.1.0/24 all is ok - they are dropped by acl2 When packets are generated from 172.16.1.0/24 to 10.1.1.10 they are not dropped by any ACL - the reason is stateful firewall - traffic bypasses all access lists on a back path I thought that TCP State Bypass feature can solve this problem and disable stateful firewall inspection for traffic coming from 172.16.1.0/24 to 10.1.1.0/24, but it didn't work.The central asa 5500 is configured according to cisco doc [URL]
access-list tcp_bypass_acl extended permit tcp 172.16.1.0 255.255.255.0 10.1.1.0 255.255.255.0
!
class-map tcp_bypass_map
description "TCP traffic that bypasses stateful firewall"
match access-list tcp_bypass_acl
[code].....
Cisco VPN :: ASA5500 - User Authentication ACS By Adding External RADIUS Database
Feb 28, 2012I would like to configure the below setup:
End user client (Cisco Any connect/VPN client) -> ASA 5500 (AAA client) -> ACS server -> External RADIUS database.
Here ACS server would send the authentication requests to External RADIUS server.So, i have added the external user database (RADIUS token server) in ACS under External databases.I have added AAA client in Network configuration (selected authenticate using RADIUS(VPN 3000/ASA/PIX 7.0) from the drop down.
Here how do i make ASA recognize that it has to send the request to ACS server. Normally when you use ACS as RADIUS server you can add an AAA server in ASA and test it.But here we are using an external RADIUS server which has been configured in ACS, so how do i make ASA to send the requests to ACS server?
Cisco Routers :: RV082 VPN To ASA5500 Device Crashes When Keep-alive Enabled?
Dec 19, 2011We have several RV082s here which are intended to connect to a central ASA5510 firewall. The VPNs are configured and do work basically, however in our test environment the RV082s kept crashing after an apparently unpredictable amount of time (sometimes after several days or even weeks). All the RV082 have the newest firmware installed (v4.1.0.02-tm).
When further investigating the issue, I found out that the crashes can be reproduced when enabling the keep-alive option on the RV082. When powering up the RV082, they boot, start up the VPN, and then they crash a few seconds after the tunnel has been established (one or two pings usually get through). When crashing, the RV082 becomes completely unreachable, ie no ping, no webinterface etc.
There is a note in the firmware release notes saying that enabling the keep-alive option would not work the way it should. However it seems that enabling that option lets the router completely crash after its next reboot. This makes the keep-alive option basically worthless, however we need this since the routers will get installed at remote sites with no personnel available there.
Is there any way to enable the keep-alive option without making the routers crash immediately after startup?
Cisco Firewall :: 5515x Apply On Firewall / Switches To Make Implementation Successful
Apr 22, 2013I will be implementing a new firewall (cisco asa 5515x) on my existing 3750x (server switches) and my 2960s (user switches). What should I need to apply on my firewall and swtiches to make the implementation successfull. I will put my 3750x as my DMZ and my 2960s as my inside. The 3750x have multiple subnet and also the 2960s.which features and technologies i need to know on those 3 products. my 3750x and 2960s don't have any ACL defined and most common features are vlan, switchport, trunking, spanning-tree, stacking, vtp.how my asa knows that my 3750x/2960s have multiple vlans. my current connection right now on 3750x and 2960s is just through 6 ports i assigned as one trunk, below is my config [code]
my 2960s vlans are almost the same with my 3750x except vlan 160, 170, 192. but of course when i put this in asa, i have to segragate vlan for 3750x (192, 100, 110,160, 170) and 2960s (130, 150). for my 2960s connection to the asa and since this will have big bandwidth, i will use 3 ports on my asa (and trunk it) connecting to my 2960s and i will use 2 ports on my asa (and trunk it) connecting to my 3750x. the one internet ports and my one management ports on my asa will stay like that.
Cisco Firewall :: ASA5510 - Unable To Ping From User Desktop To Firewall Inside IP
Jun 11, 2012I am able to ping from Switch to firewall inside ip and user desktop ip but unable to ping from user desktop to FW Inside ip.. config is below for both switch and FW Cisco ASA5510....
TechCore-SW#ping 172.22.15.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.22.15.10, timeout is 2 seconds:
[Code].....
Cisco Firewall :: 2901 - How To Avoid SMTP Inspection On Zone Based Firewall
Aug 2, 2011We had a problem with SMTP inspection dropping some regular emails (Cisco 2901 IOS 15.0). The original configuration.
View 2 Replies View RelatedCisco Firewall :: 2901 To Avoid SMTP Inspection On Zone Based Firewall
Jun 21, 2011We had a problem with SMTP inspection dropping some regular emails (Cisco 2901 IOS 15.0).Incoming mails are going thru Spam and Virus Blocker so that bypassing SMTP inspection is not security issue in this case.
View 1 Replies View RelatedCisco Firewall :: ASA 5585 / Identity Firewall With Single Forest / Multi-Domain
Dec 28, 2011I have a question with regard to setting up the ID firewall on the ASA 5585 in a single forest, multiple domain windows network.Currently I have a semi-operational IDF at the top level but can't find users on the lower other domains, here is the setup:I have 3 domains.
[URL]
Both domains have a two way parent-child trust and I can look for users in AD Users/Computer on both domains. I initially setup the ASA to look at domain1.test.com using an LDAP aaa-server per the IDF instructions, and then proceeded to configure the ad-agent. I installed the adagent on the domain1.test.com domain controller configured the settings on that system and had no problem adding users to the firewall and getting functionality within domain1. I looked to see if I could see domain 2 and domain 3 users and found none. I went ahead and added the domain2 system to the adagent on the DC and the system says that it is up, but when I search for users is not pulling them from domain2. Instead, it shows domain1 users as domain2user1. I also configured another adserver in the ASA to search ldap on domain 2 to no avail.The cisco documentation states the following:•Before you configure even a single domain controller machine using the adacfg dc create command, ensure that the AD Agent machine is first joined to a domain (for example, domain J) that has a trust relationship with each and every domain (for example, domain D[i]) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine). Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.Reading that it sounds like it should just work. I had everything properly configured before I installed the adagent, but I'm guessing that there is a chance that you can't have the adagent on the top level DC and get to communicate with the lower level domains.
Cisco Firewall :: ASA Firewall Positioning In Transparent Mode Between 6509 Core Switch And WLC
Apr 26, 2011I do have the below setup,,
1. I have 6509 switch
2. I have 2 WLC configured in Active/Active mode connected in Trunk mode (L2 Port-Channel) connected with 6509 switch
3. On switch side i have configured the port as Trunk
4. L3 SVI for wireless users are created in 6509 switch (attached the diagram).
I would like to introduce a Cisco ASA 5520 firewall with AIp-SSM module so that all wirelees traffic can be inspected.
The issue is: Without changing any configuration in the network (switch & WLC) is it possible to introduce the firewall?
Cisco Firewall :: Monitoring ASA 5505 Firewall Active / Standby Pair Using SNMP?
Sep 7, 2011How I can actively monitor the interfaces and overall status of 2 x ASA 5500s in an Active/Standby configuration?
I can setup monitoring of the interfaces on the Active member but I'm not sure how to manage the Standby member?
Cisco Firewall :: IOS Zone Based Firewall Websense URL Filtering Feature On 881G
Jul 27, 2011I've been trying to configured Websense urlfiltering using ZFW feature on my Cisco 881G router. The router is running on IOS 15.0(1)M with Advanced IP Services. And I have confirmed it supports urlfilter feature.
This is what I tried to accomplish but IOS version 15.0x seems to have different command set.
-----------------------
class-map type inspect httptraffic
match protocol http
parameter-map type urlfilter param
server vendor websense 10.20.30.40
[Code]...
Cisco Firewall :: SSM-4GE Firewall Has 5 DMZ Segments And Specific Segment For Internet Traffic
May 23, 2013I was asked to enable netflow in an ASA Firewall for Orion/Solarwinds server monitoration. Firewall is a 5550, with 4G RAM, and no extra modules but SSM-4GE. This firewall has 5 DMZ segments and ans specific segment for internet traffic.There are segments as unique subinterfaces in physical interfaces. Other segments as individual subinterfaces in the same physical interface (but individual VLANs)Usually firewall CPU flows between 30% to 40%. Rarely to 50%.
1 - How dangerous or risky could be implement netflow in this firewall?...This firewall is very critical for the customer. My concern is regrading CPU, traffic generated, memory, etc
2 - In a month, firewall will be migrated from 8.2 software version to 8.4 software version. Is there any incompatibility in some commands?...Would be recommended to perform netflow configuration after software upgrade?
3 - How could it be implemented for Orion monitoring, regarding each individual sub-interface (and so, each VLAN assigned)?I there any recommendation regarding configuration, best practices?