Cisco VPN :: Can't Log Into Remote ASA 5505 On Code 8.0.5
Jan 5, 2011
I have 2 ASA5505 firewalls deployed, 1 at the data center (code v8.0.3) and 1 at a remote location (code v8.0.2). The remote location has 2 PCs that connect back to the data center to access the directory services, exchange, file servers, etc. The ASA5505 firewalls are configured for a site to site VPN.We were having stability issues with the remote ASA so we decided to upgrade the code as a first step. We updated the data center to 8.0.5 and all was well. I data was flowing and I could get into both ASAs from the data center via ASDM and ssh.Then I updated the remote location to 8.0.5. Now I can't ASDM or ssh into either ASA unless I'm at that specific site. PCs are still able to connect their servers.
I am unable to ping, telnet, ssh or ASDM into the inside vlan ip address while I am at the other site. I can see in the logs inbound connections being built on the distant firewall but it doesn't build a new outbound connection to reply traffic.Did 8.0.5 do something to block management connections from the outside?
View 7 Replies
ADVERTISEMENT
Feb 19, 2013
I have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
View 3 Replies
View Related
Feb 14, 2013
I have created Remote access vpn on ASA 5505 (ver 8.2(5) with base license). When I connect from one machine, I can ping the internal network. But when I connect from another machine, cant.I have only decrypts on the ASA side, without encrypts. I was debugging ICMP packets with the capture feature, and saw that echo-reply packets are returning toward the outside interface, but aren't passing through it.
capture test access-list test interface outside
1: 08:54:44.298980 802.1Q vlan#1 P0 x.x.x.x > y.y.y.y: icmp: echo reply
Where x.x.x.x is LAN and y.y.y.y is the VPN client ip. The nat is ok, access lists are ok, but the packets dont pass through.I tried creating new VPN profile but the same problem, it seems that only one remote client can be active even base license allows more than 1 client.
View 2 Replies
View Related
Jun 19, 2011
Got a single asa 5505 configured in the office. we have 3 site to site vpn connections from this device, which all work from within the office.Ive not setup my pc to connect from home to the asa via the ciso client.
i can connect to all LAN servers on the local subnet, however i cannot connect through the ASA to any of my site to site vpn's.
if i do an ipconfig on my home pc i can see my local ip, mask & gw, and i can see my assigned remote access ip & mask but no gw.
I cannot ping any remote site to site pc's by IP or name.
View 6 Replies
View Related
Dec 6, 2010
There is a site I oversee that is moving to a new ISP. The drive is 2 hours round trip and I need to do is change an IP. DHCP is being handed out by the internal Domain Controller and all the workstations point to the server for DNS. Will the following commands inputted over an SSH putty session into the current WAN IP change the IP and allow me to hookup to the new ISP? The plan is to copy and paste the following commands into global config mode. Currently they are using DHCP on the WAN side which I do not approve of and their external route is pointing to the internal IP of 192.168.1.1. Things still work but I want to do away with this. Will these commands get the job done?
interface vlan 2ip address 68.x.x.2 255.255.255.240exitno route outside 0.0.0.0 0.0.0.0 192.168.1.1route outside 0.0.0.0 0.0.0.0 68.x.x.1
View 7 Replies
View Related
Dec 10, 2012
I am currently having an issue configuring an ASA 5505 to connect via remote access VPN using the Cisco VPN Client 5.0.07.0440 running on Windows 8 Pro x64. The VPN client prompts for the username and password during the connect process, but fails soon after.
The VPN client logs are as follows:
Cisco Systems VPN Client Version 5.0.07.0440
Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 6.2.9200
2 15:09:21.240 12/11/12 Sev=Info/4 CM/0x63100002
[code]....
View 9 Replies
View Related
Apr 24, 2012
We have a ASA 5505 in our enviroment. We already configures two site 2 site VPN to our branch offices. Now we are planning to configure remote access VPN. So what should be consider when configuring the remote access VPN in ASA which already having site to site VPN?
View 9 Replies
View Related
Oct 3, 2011
I have Cisco ASA 5505 and i want to create vpn remote access ...l
so i created and connected to the vpn ...my problem is to reach my Local connection of 192.168.1.0 /24 i put the WAN Connection in the FA0/0 and put my LOCAL AREA CONNECITON into FA0/1 .. so how i can route or translate my connection , and using cisco ASDM 6.1 in GUI ,,,
View 1 Replies
View Related
May 25, 2011
I have set up two ASA 5505's (lets call them ASA1 and ASA2) with site to site VPN configuration and i've encountered two problems with my setup.ASA1 has IP 192.168.1.254 on the inside interface and is connects ASA2. It's also an Easy VPN Server for external users to connect through Easy VPN Client.ASA2 has IP 192.168.11.1 on the inside interface and connects to ASA1 Problem #1 None of the ASA's can ping eachothers inside LAN IP address. Computers behind the ASA's are unable to ping the remote ASA's inside IP address. My guess is that this has to do with either NAT or built in security.Problem #2. The Easy VPN clients which connects to ASA1 are unable to access the LAN behind ASA2.
View 3 Replies
View Related
Jun 24, 2012
configuring ASA 5505 to be able to ping remote host.Setup - We have a site-to-site (192.168.1.0/24 - 192.168.2.0/24) VPN setup with client VPN access (IP Pool, 172.16.50.0/24) on 192.168.1.0 ASA 5505.Issue - Not able to ping host on 192.168.2.0 from VPN client 172.16.50.0 but able to ping 192.168.1.0 host.
View 8 Replies
View Related
May 22, 2013
We have 3 offices, each with an ASA 5505 as the router/firewall, connected to the cable modem
(NC office) <----IPSEC----->(PA office) <----IPSEC-----> (CT office)
Internally we have a full mesh VPN, so all offices can talk to each other directly.I have people at home, using remote access VPN into the PA office, and I need them to be able to connect to the other two offices from there.I was able to get it to work to the CT office, but I can't get it to work for the NC office. (What I mean is, users can remote access VPN into the PA office, and access resources in the PA and CT offices, but they can't get to the NC office).
Result of the command: "show run"
: Saved:ASA Version 8.2(5) !hostname WayneASA
names!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0 !interface Vlan2nameif outsidesecurity-level 0ip address 70.91.18.205 255.255.255.252 !ftp mode passiveclock timezone EST -5clock summer-time EDT recurringdns domain-lookup insidedns domain-lookup outsidedns server-group DefaultDNSname-server 75.75.75.75name-server 75.75.76.76domain-name 3gtms.comsame-security-traffic permit intra-interfaceobject-group protocol TCPUDPprotocol-object udpprotocol-object tcpaccess-list inside_access_in extended permit ip any any access-list IPSec_Access extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 access-list IPSec_Access extended
[code].....
View 15 Replies
View Related
Sep 27, 2012
i want my ASA 5505 8.2(5) to access my proxy server on remote lan through VPN my VPN is OK, all PCs of local network can access to remote network.but ASA on local network can't access to remote network.i think it's a NAT problem but ....
local network 192.168.157.0/24 local IP ASA 192.168.157.1
remote netword 10.28.0.0 /16
remote proxy 10.28.1.26
my conf
[code]....
View 1 Replies
View Related
Mar 30, 2012
I created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.and iam using Cisco asa 5505 with Shrew Soft VPN software , so my problem is,- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection, any remote vpn connection software that accepts more than one connection
View 1 Replies
View Related
Apr 5, 2012
I just made a VPN on my ASA 5505 at home, I can connect successfully to it, but I can't contact anything in the network, nothing respond to ping or to anything else (include the ASA inside IP).
View 3 Replies
View Related
May 24, 2011
I have 3 networks coming from the DMZ (VPN) and only one works:10.132.24.0/24 Not working10.132.25.0/24 Not working10.132.26.0/24 Working The thing is, the one that works is on the same network as the DMZ(VPN) interface. The other two do authenticate and they get an IP from the VPN Pool. but they just cant access anything.
View 11 Replies
View Related
Feb 2, 2012
I try to configure a simple EzVPN infrastructure:
EzVPN Server (CISCO2811, hostname cme) < -- > EzVPN Remote (ASA5505, hostname ezvpn-asa) < -- > Client
Attached you find both configuration of the EzVPN server and remote. The tunnel is getting up and if I ping from the ASA to the Router, I see the packets getting encrypted:
ezvpn-asa# ping 172.16.100.1
...
ezvpn-asa# show crypto ipsec sa
interface: outside
Crypto map tag: _vpnc_cm, seq num: 10, local addr: 172.16.100.2
[code]....
If I connect a client with IP address 192.168.1.2 to the interface eth0/1 and do a ping to the cme, I don't see any packets getting encrypted. I don't have any idea about VPN, I just need it for a wireless lab environment. What do I have to configure on the ASA, so the inside traffic is encrypted?
View 2 Replies
View Related
Mar 1, 2012
I have not really set up ASAs nor VPNs on Cisco devices before. I'm currently attempting to configure a remote access VPN between ASA devices, a 5505 and a 5510. The 5510 is meant to be the server and the 5505 is meant to be the easyvpn client. The reason I am opting for remote access as opposed to site to site is that I have many 5505s at remote sites that I will need to configure in the future, and they will be moving around a bit (I would prefer not to have to keep up with the site-to-site configs). The 5510 will not be moving. Both ASA devices are able to ping out to 8.8.8.8 as well as ping each other's public facing IP.
Neither ASA can ping the other ASA's private IP (this part makes sense), and I am unable to SSH from a client on the 5510 side to the 5505's internal (192) interface. I have pasted sterilized configs from both ASAs below.
ASA 5510 (Server)
ASA Version 8.0(4)
!
hostname ASA5510
domain-name <domain>
enable password <password> encrypted
passwd <password> encrypted
[code].....
View 3 Replies
View Related
Aug 29, 2011
I have created a Remote VPN connection on a Cisco ASA 5505.When I'm connected remotely through the Cisco VPN Client my connection is very slow.I have a response time of 220ms when I ping my server. how to improve the speed of the VPN connection?
View 1 Replies
View Related
Dec 21, 2012
I try to configure my CISCO ASA 5505 for remote access vpn, and I encounter the following issue : Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. [code]
View 2 Replies
View Related
Jan 17, 2012
Is there a way I can configure a remote access VPN on a Cisco 5505 using digital certs instead of pre-shared key. I dont want to use a 3rd party CA, can the ASA perform this role? with a self signed cert?
View 6 Replies
View Related
Mar 10, 2013
I have an ASA 5505 that is on the perimeter of a hub & spoke vpn network, when I connect to this device using the VPN client I can connect to any device across the VPN infrastructure with the exception of the sub net that the client is connected to, for instance:
VPN client internal network connects to 192.168.113.0 /24 and is issued that ip address 192.168.113.200, the VPN client can be pinged from another device in this network however the client cannot access anything on this sub net, all other sites can be accessed ie. main site 192.168.16.0/24, second site 192.168.110/24 and third site 192.168.112/24. The ACL Manager has a single entry of "Source 192.168.113.0/24 Destination 192.168.0.0/16 and the "Standard ACL 192.168.8.8./16 permit.
View 14 Replies
View Related
Nov 7, 2012
I had a previous issue in which I couldn't make a connection to an ASA 5505 behind an edge firewall found here: url...My continuing issue is that I can indeed connect to the ASA 5505 remotely but I cannot access anything internally. I believe it is a NAT issue but as of yet, nothing has worked.
View 1 Replies
View Related
Aug 22, 2012
unresponsive / lockups with Cisco ASA 5505 remote management ?
I think it happens like this:
1) With ASDM (Java Web Start), add new crypto map (it could be anything, just happens to be what i added the last time this happened)
2) Click apply
3) ASDM hangs (at this point the Java client becomes entirely unresponsive)
4) ASDM.jnlp refuses to connect and eventually timeout dialog appears. However, VPN connections are still accepted.
5) After a few hours (over night), the ASA refuses all incoming traffic including VPN connections.
View 5 Replies
View Related
Apr 11, 2011
I have setup a vpn connection at my remote offices with a 5505. At my main office I have a 5510.From my remote offices I can PING my Main office server. However when I go to set up a vpn connection through windows network and sharing center I can't seem to have the connection connect.....
View 15 Replies
View Related
May 23, 2011
I have a question on a VPN connection. I have a remote access VPN setup on an ASA 5505 to be able to remote into a location and check the HVAC program running on a PC. The remote connection connects fine, but when I use remote desktop to connect to the PC, it connects quick, but the screen redraw and reaction time is extremely slow. EG: I click on the program and it takes about 20 seconds to draw the screen, or I click on a menu bar and get the same times for reactions. Could this be a ISP Up/Download issue or is there something that I need to look at on the ASA to change?
If I connect to the remote and do a PING from my desktop to the remote Desktop, these are the results that I get:
Reply from 192.168.XX.XX: bytes=32 time=96ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=132ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=90ms TTL=128
[Code]......
View 4 Replies
View Related
May 21, 2012
I have a remote ASA5505 running 8.4(3) with a working site 2 site VPN tunnel to my main office. (The main office is running an ASA 5510 with OS 8.4.3 as well). The encryption domain is all private IP on main site vs. 172.16.10.0/23 on remote site.
Relevant config of the remote ASA:
interface Vlan1
nameif inside
security-level 100
[Code].....
I can manage the ASA on the outside interface (outside of the site 2 site VPN) using the TACACS credentials I can also ping my management station from the ASA using the inside interface, but as stated, the other way around does not work. I have not yet tested if management from the local 172.16.10.0/23 subnet works, but I will try this next.
View 5 Replies
View Related
Aug 17, 2011
I have an ASA 5505 running 8.2
I used the ASDM wizard (6.3) to set up a remote VPN. After slightly adjusting the wizards configuration the VPN is working well.
Now I need to change the Outside interfaces IP address. When I do that the VPN no longer works. If I change it back to the original value the VPN works again.
What configuration changes do I have to make regaurding the remote VPN after changing the outside interfaces IP address?
View 11 Replies
View Related
Oct 26, 2011
Users are connecting to Site A (PIX 515e) via Cisco VPN client and can access servers/resources within that site no problem. They cannot access anything within Site B (ASA 5505) however. Devices communicating between Site A and Site B have no issues (have site to site VPN configured). I'm assuming that I'm missing something in configuration - or is it not possible for VPN clients connected to the PIX firewall and access data on the other network?
View 1 Replies
View Related
Oct 18, 2011
i have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
View 13 Replies
View Related
Dec 20, 2011
I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside:192.168.150.1/49562 to outside:213.199.181.90/80 duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.
View 4 Replies
View Related
Apr 3, 2013
I have an ASA 5505 and have a problem where when I connect through VPN I can RDP into a server using its internal address but I cannot RDP to another server using its internal address.The one I can connect to has an IP of 192.168.2.10 and the one I cannot connect to has an IP of 192.168.2.11 on port 3390.Both rules are configured exactly the same except for the IP addresses and I cannot see why I cannot connect to this one server.I am also able to connect to my camera system with an IP 192.168.2.25 on port 37777 and able to ping any other device on the internal network.I've also tried pinging it and telneting to port 3390 with no success.
Here is the config.
ASA Version 8.4(4)1
!
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
[code]...
View 11 Replies
View Related
Oct 10, 2012
I am installing 2 ASA 5505s at home offices with dynamic IPs. The EasyVPN server is a ASA585x. I am using the 5505s in NEM mode. I configured a unique DHCP scope on each 5505. I have a dynamic crpto map on the server. I configured unique tunnel groups, group policies and usernames for each site on the server. This seems to work fine. Is it normal to configure unique tunnel groups, group policies and usernames for each remote site?
View 2 Replies
View Related
Apr 17, 2012
I have 3 AIR-CAP3502I-E-K9 AP’s on my network now. Its connected directly to a cisco L3 switch now. and through a WAN link it communicates to a cisco 5505 WLC at remote head office (flexconnect).I want to install a low end WLC on my office, so that incase of the WLC fails at head office, still the clients on my end able to connect to the AP .So which of the following models are support for the AIR-CAP3502I-E-K9 APs ? and can that’s WLC talk with the other one at head office(WLC 5505) ?
View 1 Replies
View Related
