Internally we have a full mesh VPN, so all offices can talk to each other directly.I have people at home, using remote access VPN into the PA office, and I need them to be able to connect to the other two offices from there.I was able to get it to work to the CT office, but I can't get it to work for the NC office. (What I mean is, users can remote access VPN into the PA office, and access resources in the PA and CT offices, but they can't get to the NC office).
Result of the command: "show run"
: Saved:ASA Version 8.2(5) !hostname WayneASA
names!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0 !interface Vlan2nameif outsidesecurity-level 0ip address 188.8.131.52 255.255.255.252 !ftp mode passiveclock timezone EST -5clock summer-time EDT recurringdns domain-lookup insidedns domain-lookup outsidedns server-group DefaultDNSname-server 184.108.40.206name-server 220.127.116.11domain-name 3gtms.comsame-security-traffic permit intra-interfaceobject-group protocol TCPUDPprotocol-object udpprotocol-object tcpaccess-list inside_access_in extended permit ip any any access-list IPSec_Access extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 access-list IPSec_Access extended
Users are connecting to Site A (PIX 515e) via Cisco VPN client and can access servers/resources within that site no problem. They cannot access anything within Site B (ASA 5505) however. Devices communicating between Site A and Site B have no issues (have site to site VPN configured). I'm assuming that I'm missing something in configuration - or is it not possible for VPN clients connected to the PIX firewall and access data on the other network?
I am having issue with network connectivity between remote access (RA) VPN users and remote site VPN hosts.
Topology is: RA VPN laptop (192.168.200.3 /24) ---- internet ---- Head Office (ASA5505) -- LAN subnet 10.0.0.0 /24
SiteB (10.0.10.0 /24) ---- internet ----- Head Office (ASA5505) ---- LAN subnet 10.0.0.0 /24
From head office there is no issue communicating with RA VPN and siteB hosts but Site B hosts and RA VPN users can not communicate each other totally (ping failed too).
Site B is using Cisco 867 router with IPSEC VPN to the ASA5505 at head office. I have added the ACL on this router to access 192.168.200.x /24 for VPN traffic and exempt from NATing. When I enabled ' drop log' in the class-map in the Zone based firewall config, I could not see any ping packt comes in so I believe the issue is at ASA5505 config.
At ASA5505 I use split VPN tunnel ACL and have included the subnet for 10.0.10.0/24 as well as 192.168.200.0 /24. This split tunnel ACL are applied to both the IPSec VPN tunnel and also the RA VPN group policy. The ASA is using sw version 151-4.M5.
cisco products and am struggling getting a VPN going between an ASA 5505 and 5510. I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).
i have 2 router asa 5505 with base license i wanna make site to site vpn connection and remote site using vpn client to connect first i have hdsl router with 5 public ip i wanna try it by giving 1 public ip to each router and try the vpn but nothing work?
Remote-access users aren't able to reach our remote network through a site-to-site VPN tunnel between two ASA 5505's.
I've seen several threads about that here, I've run through the walkthrough at [URL] I've taken a stab at setting split tunnelling and nat exemption, but it seems I'm still missing something. Remote-access users can reach the main site, but not the remote site.
Remote-access (vpn-houston) uses 192.168.69.0/24. The main site (houston) uses 10.0.0.0/24 The remote site (lugoff) uses 10.0.1.0/24
On one of our branch locations ASA, I have a L2L VPN setup we are adding wireless to this remote location, and the AP's will talk back to the controller at HQ. The AP's are on the downstream L3 switch, and they have been placed on the mgmt network. It's definitely not ideal to have these AP's on the mgmt network, but for now that is how it is setup.
From HQ (163.122.x.x) I can ping and reach the ASA (10.200.2.1, and the downstream L3 switch 10.200.2.100, but when I ping one of the AP's, I get timeouts and and the following error on the ASA:%ASA-3-305005: No translation group found for icmp src outside:10.205.216.73 dst mgmt:10.200.2.152 (type 8, code 0)
It appears it's a NAT issue on the ASA, but I'm confused on what I need to change. Why can I ping the ASA and the switch from HQ, but not the AP's which reside on the same mgmt network? I don't really need it to NAT, just to pass the connections. I currently only have the following two NAT statements in the configure
I have a requirement to create a site to site vpn tunnel on ASA 5510 from a remote site to my HO, ihave already other site-to-site tunnels are up and running on the ASA.The issue is my remote site has got the network address which falls in one of the subnet used in HO(192.168.10.0/24).My requirement is only My remote site need to accees couple of my servers in HO which is in 192.168.200.0/24 subnet.
we have two ASA 5510s one in 8.4(4) and one in 8.2(5) in a site-to-site VPN setup. All internal traffic is working smoothly.Site/Subnet A: 18.104.22.168 - local (8.4(4)) Site/Subnet B: 192.260.0.0 - remote (8.2(5)) VPN Users: 22.214.171.124 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible.
Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise.There are also some weird NAT rules that I am not happy with that were created after I upgraded Site A ASA to 8.4
Site A internal: 192.160.x.x External: 55.55.555.201(main)/202(mail) Site B (over site-to-site) is 192.260.x.x External: 66.66.666.54(all)
I pretty much just have the basic NAT rules for VPN, Email, Internet and the site-to-site.What do I need to add for the VPN to be able to access the site-to-site network?
I have a cisco ASA 5510 at the branch here. It terminates about 8 vpn tunnels and also it supports remote access clients. I just have a quick question. Can my remote sub-net group access the other remote access site-site VPN subnet group. If yes then how should i configure it.
I'm attempting to configure an for both site-to-site and remote access VPNs. The site-to-site is working fine, however when I connect using the Cisco client, after initial connection and password prompt I get a "not connected" status. The log states that a policy map match could not be found. I have successfully set the unit up for remote access with no site-to-site and ran into another host of issues when adding the site-to-site to the working remote access config, so I started over setting up site-to-site first. I've attempted this through ADSM (hate it) - the current configuration is via CLI. I'm certain I'm just missing a piece or two.
We have a client that has a Cisco 1801W Firewall that is setup as a site to site VPN terminating to a Cisco ASA 5505. The tunnel is up and established, I can ping from both sides of the tunnel.
The problem is the clients behind the Cisco ASA (192.168.2.x) cannot reach certain ports behind the Router (192.168.1.x). The main thing we're trying to do is browse via UNC path (ex: \192.168.1.120 from a 192.168.2.x machine).
I got 3389 working after I changed the - ip nat inside source static tcp 192.168.1.120 3389 y.y.x.x 3389 route-map DM_RMAP_1 extendable Modified the command to include the public IP instead of interface FastEthernet0
I believe it has something to do with the way NAT and route-maps are setup currently but I'm not familar enough with them to make the changes. I worked with Cisco to ensure the VPN tunnel was fine and it's something security related on the Router.
Here is the configuration (removed a few lines not necessary. y.y.x.x = WAN IP of Router x.x.y.y = WAN IP of ASA).
Current configuration : 23648 bytes ! version 12.4 no service pad
I'm going to confess limited knowledge up front, so forgive me if I sound like an idiot. The company I work for has recently started hosting our application for some of our clients; to do this, we are leasing rack space, connections, and hardware in a data center. We need to send data from our application to an application in our client's data center. They have an ASA 5505.
Our data center will support site-to-site VPN and nothing else. Our client finds this unacceptable, citing security and the inability to restrict access to only the small number of servers our application needs to access. I need to be able to discuss this intelligently and with facts (and, preferably, configuration examples on hand) with their CIO and network staff in the next day or so.
Can the ASA 5505 be configured for a site-to-site VPM with our data center that restricts our application server to accessing a limited set of IP addresses within their network? If so, can this be accomplished reasonably easily?
I’m relatively new to ASA & issue I’m having with a site-to-site VPN connection between two ASA 5505.I’ve configured the ASA with ASDM and we only need it for site-to-site VPN.
The issue is that the tunnel is up and both sites can ping and traceroute each other and I can access the internal web interface of the two ASA from both sites but other communication is failing like RDP (giving me 0x1104 protocol error) or any other form of network access such as network shares is failing.shouldn’t the tunnel allow all traffic to pass-through ?
So what possibly I’m doing wrong..., I know that this might be beyond the tunnel but what do you recommend me to do ? the HQ has network 192.168.10.0 and Branch has network 192.168.11.0 and we have Win server 2003 and ISA 2004 on HQ site and traffic going to 192.168.11.0 from HQ is routed to ASA by the default gateway (Win 2k3 SBS) and both networks are configured as local on Server, but even after eliminating server and isa by making ASA the default gateway of the network I’m getting the same resul [code]
The scenario where a Site to Site VPN tunnel has been established between Site A and Site B. Lan on Site A can ping Lan on Site B. My problem is a Printer behind Site B needs to be accessed by using the WAN IP address of Site A. Also i could not ping the remote lan or printer from the router.
Below are my configure on the Cisco 877 in site A.
Building configuration... Current configuration : 5425 bytes ! ! Last configuration change at 15:09:21 PCTime Fri Jun 15 2012 by admin01 ! version 12.4 no service pad
We have 2 5520 ASA's working in an active/standby function at our central site. The remote agencies have control of their ASA's or other devices able to create VPN tunnels back to the central site. When a new remote agency wants to connect to our central site we assign them a network range that is routable on the central sites network.We ask that the remote agency NAT into the addresses we provided them.This way we are able to route back to them. We assign the interesting traffic and then they we start communicating by way of the tunnel.
Since the central site can't control the traffic coming in on the site to site tunnel other than just defining the interesting traffic AND we aren't able to control the NAT on the remote end how can I put an access list on the central site ASA to allow only certain ports and IP's by way of access list? Ultimately, I'm trying to limit traffic on the central site coming inbound to only allow traffic I want. I tried applying a group policy to the lan2lan site to site tunnel, but it failed for some reason. It actually prevented all traffic. Can I apply a group policy to a site-to-site tunnel?
I'm struggling here a bit as I don't have control of the remote end. They can NAT whatever they want to an address in the range we assigned them. The tunnels interesting traffic is set to full ip to the central site's destination. The interesting traffic on the central site is set the same. However, on the central side...I want to limit that traffic to only certain ports by way of an acl. If it is possible to assign a site-to-site tunnel a group policy and filtering is done in that method, can
site A : ASA 5510 VPN gateway for remote users LAN 192.168.192.0/22 site B : ASA 5505 LAN 192.168.208.0/22
Both sites are connected through a site to site VPN.Remote clients (AnyConnect/VPN client) can connect to Site A LAN and see machines on LAN A but cannot see Site B LAN.
Here is a part of my configuration :
On Site A (ASA 5510) -------------------------------- name 192.168.192.0 SiteA_Internal_Network name 192.168.208.0 SiteB_Internal_Network name 192.168.133.0 VPNPool_AnyConnect name 192.168.133.32 VPNPool_VpnClient
I have configured vpn filtering on all my l2l vpns. I have restricted access from remote to local resources only to specified ports. It works perfectly.But I want to have also full access from local to remote networks (but still preserve restricted access from remote to local). As I now VPN Filter works bi-directional with a single ACL. So is there some way to open all traffic from local to remote and still restrict remote to local traffic? ASA 5520 8.4(3)
In my Cisco PIX-515E Version 6.3(5), I have a IPSec VPN tunnel and also to the same firewall home users connect through VPN client. I am unable to find a solution that allows my home users to connect to office network and again access the remote network through the IPSec tunnel.
we are planning on connecting a new aquired company to ours soon?We will connect the remote site to the HQ via a D3. I've been told we will need to have a firewall between them and us for a time. I was thinking of terminating the D3 connection at the remote site of 80 users. Can I use the asr as a firewall as well, to protect the HQ from the Remote site - or should I use a seperate appliance?I was thinking of a asa5505 but, am concerned with bandwidth limitations of the box?
I have ASA 5505, i configured site to site vpn between central site and remote site and is working. Now the problem is we use remote site for troubleshooting purpose, so we need to create a tunnel from remote site to central site. I need to configure such a way that remote site can craete a tunnel to central site, but central site not able to create a tunnel, it just respond to remote site.
I have created Remote access vpn on ASA 5505 (ver 8.2(5) with base license). When I connect from one machine, I can ping the internal network. But when I connect from another machine, cant.I have only decrypts on the ASA side, without encrypts. I was debugging ICMP packets with the capture feature, and saw that echo-reply packets are returning toward the outside interface, but aren't passing through it.
Where x.x.x.x is LAN and y.y.y.y is the VPN client ip. The nat is ok, access lists are ok, but the packets dont pass through.I tried creating new VPN profile but the same problem, it seems that only one remote client can be active even base license allows more than 1 client.
Got a single asa 5505 configured in the office. we have 3 site to site vpn connections from this device, which all work from within the office.Ive not setup my pc to connect from home to the asa via the ciso client.
i can connect to all LAN servers on the local subnet, however i cannot connect through the ASA to any of my site to site vpn's.
if i do an ipconfig on my home pc i can see my local ip, mask & gw, and i can see my assigned remote access ip & mask but no gw.
I cannot ping any remote site to site pc's by IP or name.
I am currently having an issue configuring an ASA 5505 to connect via remote access VPN using the Cisco VPN Client 5.0.07.0440 running on Windows 8 Pro x64. The VPN client prompts for the username and password during the connect process, but fails soon after.
The VPN client logs are as follows:
Cisco Systems VPN Client Version 5.0.07.0440 Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.2.9200 2 15:09:21.240 12/11/12 Sev=Info/4 CM/0x63100002
We have a ASA 5505 in our enviroment. We already configures two site 2 site VPN to our branch offices. Now we are planning to configure remote access VPN. So what should be consider when configuring the remote access VPN in ASA which already having site to site VPN?
I have Cisco ASA 5505 and i want to create vpn remote access ...l
so i created and connected to the vpn ...my problem is to reach my Local connection of 192.168.1.0 /24 i put the WAN Connection in the FA0/0 and put my LOCAL AREA CONNECITON into FA0/1 .. so how i can route or translate my connection , and using cisco ASDM 6.1 in GUI ,,,