Cisco VPN :: Unable To Configure Anyconnect In ASA 5520
Feb 17, 2013
We have an ASA 5520 with two VPN profiles working fine.Since some users are now working with Windows 8, VPN clients for Cisco ASA is not able to connect.I have read there are problems for such VPN Clients in that OS, and I should use now Anyconnect for them to connect. I thought we had anyconnect working also, because some users can connect to a web page they can do some kind of connections to internal servers, (web, telnet, rdp, etc) so I installed cisco anyconnect VPN client in a laptop and try to connect (same IP and port I used for that web page) but after signing I get the message AnyConnect is not enabled on the VPN Server.So I tried to follow a configuration guide for Anyconnect, but there's a step in which I am trapped, these are the steps: Click Configuration, and then click Remote Access VPN.
View 7 Replies
ADVERTISEMENT
Dec 13, 2012
I have a VPN setup thru a Cisco 5520, Windows clients connect just find and the end users configure there browser to use our internal proxy servers. Users with the MAC OS X Anyconnect client can connect, they configure their Mac to use our proxy server, but the broswers will not work, clients can reach networks and resources behind the VPN gateway and have access to the Proxy(Tried a telnet to that hostname/port). I am running ASA 8.3(2), Anyconnect(OS X) 3.1.01065.
View 3 Replies
View Related
Jul 5, 2011
2 x ASA5520 with SSM20 . using AnyConnect 3 , users are not getting disconnected from ASA even after the vpn client is closed . Users would not be able to login from the same ip until the session is active. Manual clearing of the session enable the user to log back in .
View 1 Replies
View Related
Mar 3, 2013
I have a query regarding MAC authentication for end systems on ASA 5520. Inspite of proving MAC address in endpoint authentication along with AAA, only AAA attribute policies are getting created. MAC authentication is not happening.
Is there any requirement like LDAP or AD is required for MAC authentication?
View 1 Replies
View Related
Apr 8, 2013
I have an ASA 5520 soft 8.2(3) when i try to configure the any connect I don't get the SSL and the telnet options for the connection. bare in mind that i don't have the any connect software on my asa nor do i have any certificate. is it essential to get a certificate. do i have to buy it knowing that it will only be used by our company's partners. if not how do i get it
View 1 Replies
View Related
Oct 15, 2012
We are currently using Cisco VPN Client. I'm looking to migrate to Cisco Any Connect. Our ASA 5520 has 750 IPSec and 2 SSL license. I also have approximately 40 IPSec site to site VPN's on this. ,Will anyconnect interfere with the site to site tunnels?,If I setup anyconnect with the IPSec instead of SSL do I still need to purchase the premium or essentials license?,Lets say if I do have to get the license and I get essentials will it cause any issues with the site to site VPNs?
View 2 Replies
View Related
Oct 16, 2012
My client is upgrading from anyconnect 2.5.2014 to 3.1.00495. The ASA is running ASA 5520 version 8.2(5)33 and is in an active/standby failover pair.when trying to push out the new 3.1 from the pair to windows 7 and XP machines, he gets the error "Failed to get configuration from secure gateway. Contact your system administrator". When he tries to push 2.5.2014 and 2.5.6005 out from the pair this works fine.When pushing the 3.1 out from a stand-alone test ASA 5520 it works fine.
View 2 Replies
View Related
Apr 20, 2012
We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones. [code]
View 2 Replies
View Related
Sep 8, 2011
When I try to add CAS to CAM a cannot choose a OOB Virtual Gateway or OOB Real-IP Gateway, because these operation modes are absent in Type list.What can be reason it?
View 5 Replies
View Related
Mar 26, 2012
We currently are using the anyconnect client using certificates for authentication (ASA 5520 v8.4). It works pretty good but I can only get it to work on a profile basis on the clients laptops. We are running windows 7 and if multiple users need VPN i have to install the certificate for each user. I have changed the xml profile to read the certificate store to "all" and true for certificate store override. I am installing the certificate in the trusted root certificate store. Is there a way for the anyconnect to authenticate for all profiles (users) for the laptop?
View 0 Replies
View Related
Jul 8, 2012
I have an ASA 5520 and I am having trouble getting the AnyConnect VPN authentication timeout feature to work properly. I thought I did have it working a couple of months ago, but right now it is not giving me more than the default 12 seconds. I have tried intervals of anywhere from 25 seconds up to 120. I am currently runnign version 6.4 on the ASA and AnyConnect 2.5.3055.
View 8 Replies
View Related
Aug 18, 2011
We currently have a setup where users connect to the inside of a firewall using the ipsec client. We are moving them to the anyconnect client but are unable to get it to work, we cannot even get a webvpn page on the inside.
When trying to connect with anyconnect the ASA reports an IKE initiator fail on the inside. and no tcp connection flag. We cannot get any response with Webvpn either I have tried using a different tcp port on webvpn but then the asa denies the traffic even though there are no rules denying.
View 3 Replies
View Related
May 28, 2012
I am setting up Clientless Anyconnect on ASA 5520. I have a Verisign Cert but when I go to Certificate Management-->CA Certificates-->Add, I put everything in and click "install certificate" I get an error. FYI I have the Primary Cert Authority Installed already?
View 1 Replies
View Related
Aug 10, 2012
We are rolling out a new VPN infrastructure utilizing ASA 5520's (one active/standby cluster at each of our two sites) and making the conversion from the old IPsec client over to AnyConnect 2.5 clients. We do have AnyConnect Premium licenses at both sites, but are not utilizing ISE. What we want to do is first auth the machine that's trying to initiate the AC VPN session to determine if it a company-owned machine (with the idea that only co-owned machines can connect), and then auth the user using RADIUS, which uses attribute 25 to assign them into groups for policy application. We have the RADIUS piece working now, but is there a way to first do the machine auth, and then the user auth? We don't just want to use something like cert-based VPN because if the machine gets stolen (or a non-co user otherwise gets into the OS) then we don't want the non-legit user to be able to establish a VPN session just because they have access to a company machine. The other rub is that the machine auth solution must be cross-OS compatible (we use a mix of Windows, MacOS and Linux on the machines that should be allowed to VPN.)
View 7 Replies
View Related
Jun 18, 2012
We upgraded and re-configured two existing ASA5520 platforms in order to provide an SSL VPN solution for one of our customers.
The customer opted to deploy AnyConnect Essentials the functionality / features they required for day one were catered for in the Essentials license and budget constraints meant Premium licensing could not be included in the original deployment.
The licenses added to the system were:
L-ASA-AC-E-5520= AnyConnect Essentials VPN License - ASA 5520 (750 Users)
ASA-AC-M-5520 AnyConnect Mobile - ASA 5520 (req. Essentials or Premium)
The customer is now seeing a growing number of mobile devices and wishes to support the BYOD culture growing within the business; as a result we now need to use features available in AnyConnect Premium. I am aware from reading the following document [URL] that AnyConnect Essentials and Premium licenses cannot co-exist on an ASA; I need to ensure we purchase the appropriate upgrade for the customer.
Is there an SKU to upgrade / migrate an existing Essentials deployment to Premium? I've reviewed the licensing guide and price list but cannot find a method which enables this transition.
View 3 Replies
View Related
Feb 8, 2011
I have setup an AnyConnect Connection Profile on my ASA 5520.
We have some remote support software which the helpdesk use to connect to PC's remotley and torubleshoot.
I cannot connect to this software using the assigned IP address of the client even though it works fine with our old Nortel VPN.
If I hit the IP address the packet gets all the way to the ASA and seems to disappear.
I have setup an IP v4 access list on the connection profile which allows any/any access b ut still no joy.
View 1 Replies
View Related
Sep 25, 2011
I currently have a Cisco 5520 ASA which is up and running and the users are able to connect to Anyconnect to VPN into the network. However, users plugged into the internal network inside the ASA are unable to connect to the vpn address and download the Anyconnect Client. I think this may be to do with reverse NAT missing?
View 4 Replies
View Related
Apr 16, 2012
We have instructed our user community to start their VPN sessions by connecting to our ASA 5520 with a browser to download (if necessary) and initiate the Anyconnect essentials VPN client. Everything was working fine until a few days ago.
We have had several people report the same problem. They connect with the browser, enter their login information and are greeted with our "authorized use only" message by the ASA. Then, instead of downloading (if necessary) and starting the VPN client software, the web page just goes back to the login prompt without displaying any error message. The client software is never downloaded or started.
We've been able to work around this by installing the client software manually (where necessary) and starting the VPN client from the start menu. However, this isn't our preferred solution because this method won't have them automatically picking up updated versions of the VPN client.
We have seen this behavior before when there was a pending Java update that had not been applied. However, that doesn't seem to be the case this time. Clients have recently updated to IE9, but I have personnally been running the Anyconnect client and launching through IE9 for months.
View 8 Replies
View Related
Feb 6, 2013
I just started configuring AnyConnect with ASA 5520 that uses Cisco SecureACS to pass radius authentication. I configured two profiles with different split tunnel restrictions and what I discovered is that when the client connects to the ASA, they are provided a choice of these two groups (I guess there is no way to restrict this) and I can log into either one with any user account. How do I restrict this so that the user can only use one profile? Currently users capable of VPN would be placed in one specific AD group so that is what SecureACS checks. Is there a sample configuration guide to handle multiple profiles with different levels of access?
View 3 Replies
View Related
Nov 6, 2012
I have been successfully able to setup Cisco AnyConnect VPN on ASA 5520 with 8.4 code. I have set it to authenticate against the RADIUS Server (Microsoft Windows 2008 NPS server). I have noticed one thing, on the server under "Constraints and Authentication Method". I picked MS-CHAP-v2, but it is considered Less secure authentication methods. I can click on Add and choose other Authentication methods like Smart Card or other Certificate, PEAP, EAP-MSCHAP v2. I picked PEAP but then the VPN does not work.
So first of all does it really matter if I just leave it to MS-CHAP-v2? Because from my understanding is that AnyConnect will authenticate to ASA and then ASA in the backend talks to the RADIUS server so from a security stand point this scenario shouldn't it be sufficient as no un encrypted or less secure information is available to the outside world? Secondly is there any documentation on using PEAP with Cisco AnyConnect?
View 4 Replies
View Related
Jan 2, 2012
So i setup a failover active / passive with 2 ASA5520's
Primary asa has 750 Anyconnect vpn licensing and the secondary asa has 2 Anyconnect licenses
I haven't setup the second asa with the new 750 licenses i purchased but when i do a show version it shows that the failover licensed features shows 750...
Does this mean i do not have to install the secondary anyconnect licenses on the standby ASA unit?
output of secondary asa
:
Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 150 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active
[Code]......
View 1 Replies
View Related
Mar 9, 2011
I have 50 SSL Premium licenses on my ASA 5520 running 8.4. I want to run Anyconnect on IPAD- and IPHONE-devices but it seems that this requires a Mobile-license on top of the premium-license. Is it possible to receive an evaluation-license for this? It will take a few days to receive permanent licenses and I want to user this now.
View 1 Replies
View Related
Mar 1, 2011
I need to activate AnyConnect SecureMobility client on an IPAD. I have an ASA with the below feature licenses:
[code]...
This platform has an ASA 5520 VPN Plus license
As I've understood that I need the ASA-AC-M-5520 license for each IPAD used but they mentioned that we need also the Essential or premium license to be activated on the ASA as well. As shown above, I have the "VPN Plus license" activated on the firewall.
View 1 Replies
View Related
Mar 12, 2013
While user's connecting through AnyConnect, AnyConnect doesn`t check endpoint attributes. I've configured checking process of "notepad.exe", but it doesn`t work. There is no checking process of "notepad.exe" in output debug dab trace (see attach).
ASA 5520 ver 8.4(1)
AnyConnect 3.1.02040
HostScan 3.1.02043
CSD 3.6.6234
View 16 Replies
View Related
Apr 29, 2012
I am a little new to Cisco ASA's but we bought two new 5540's to use as a new VPN solution for our company. We want to implement Cisco Anyconnect full client and Clientless based solutions for our end users. I am having problems working with setting up access lists based on groups. I simply want to create access-lists to certain IP's based on groups. I ultimately want to get to the point where we have Dynamic Access Policies that are based on Active Directory Groups allowing access to back end servers based solely on their group membership in AD. But first I need to figure out how to just apply an ACL on a group.
View 2 Replies
View Related
Apr 18, 2011
I have ASA 5520 running ver 8.3.(2)8 and configured for AnyConnect VPN. While testing for iPads and iPhones we noticed that on connecting it disconnects few times before finally connecting. These are the messages logged in the ASA.I don't see authenticatio as an issue. Results are better with wifi compared to 3G. [Code]
View 1 Replies
View Related
Oct 31, 2012
I have an SSL VPN set up on my ASA 5520 with a self signed cert. When I run the AnyConnect install on my desktop machine I have click through a few windows to accept the certificate. When I connect through the mobile client on Android, the connection goes right through without a prompt to import/choose/download a certificate. I'm able to connect but I'm wondering if the phone has actually recieved a certificate. I'm in the 'Advanced Connection Editor' screen and the certificate setting says "Automatic".
View 2 Replies
View Related
Jun 3, 2013
We are using an ASA 5520, running 8.4(3). We have users running the AnyConnect Secure Mobility Client 3.1.02026. I have the AnyConnect connection profile configured to authenticate users using LDAP over SSL. I enabled the password management and am able to get password change prompts to appear in the AnyConnect client. However, new passwords are rejected and changing passwords through that prompt does not work. I'm not sure what the cause of the problem is, since LDAP over SSL is enabled and working, which is required for the password management feature
View 9 Replies
View Related
Sep 25, 2012
I am trying to configure Anyconnect for the 1st time via the GUI, though I am comfortable with the command line if required. I am familiar with PIX and IOS prior to 8.3 so this is my 1st time with newer versions. My equipment is in a lab environment at the moment but will be placed into production shortly. I recieve the following errors when trying to establish an Anyconnect VPN connection with the local account on the ASA. Below is my config
ASA Version 8.6(1)2
!
hostname TOR1PLXSD01
enable password sxZETAvnsVuPSnUc encrypted
passwd FomDbcd6ujnk.spR encrypted
names
[code].....
View 7 Replies
View Related
May 14, 2012
how to configure AnyConnect on an ASA5505, but I wanted to check before to make sure I was going the right direction.
Setup: I have a very simple setup and basic goal. I currently just have one laptop on E0/1 of my ASA5505 and then the ASA configured with a static IP plugged to the Internet. I have the ASA correctly configured and can browse the web through the laptop. I also have the AnyConnect and AnyConnect Mobile licenses as well.
Goal: I want to set up AnyConnect on the ASA5505 and just establish a successful connection from an android mobile device running the necessary AnyConnect software from the market.
There are lots of guides for specifc set ups, but as described, I want to keep this as simple as possible.
[URL]
Also, I'm more comfortable with the CLI. Is it simpler to use the ASDM wizard for this?
View 2 Replies
View Related
Apr 17, 2013
I am having anyconnect version 3.1.03103, windows7 & 8 and asa 5520 (8.4). I have gone through alot of work to solve this issue but it not hapening. On clientless ssl vpn it prompts me for manual certificate selection but on anyconnect client it is not. profile configuration is mentioned below. In the highlighted line below i have changed UserControllable="true" still no results.
<?xml version="1.0" encoding="UTF-8"?>
-<AnyConnectProfile xsi:schemaLocation="[URL]" xmlns:xsi="[URL]" xmlns="[URL]">-<ClientInitialization>
[Code]....
View 0 Replies
View Related
Oct 10, 2011
is it possible to use cisco AnyConnect client to connect users with Cisco VPN 3000 appliance?If so how to configure VPN 3000 concentrator to work with AnyConnect?
View 1 Replies
View Related
Mar 3, 2012
This is for an ASA 5505. I am trying to configure an AnyConnect and IPSec VPN connection and I think it's almost there but not quite yet. When I login from an outside network it gives me the following error for the SSL AnyConnect "The VPN client was unable to setup IP filtering" and "Secure VPN connection terminated by peer" for the IPSec. I previously had this working since Oct, but I was trying to modify it a little to accept LT2P for native Android VPN clients and that messed up everything that I had working perfectly. I checked everything as best as I could to try and match the previous settings but still can't get the darn thing to work. I am trying to also do Hairpinning, I want all VPN traffic to pass through this router... remote LAN and Internet traffic for times when I am at unfamiliar wifi hotspots and need to check email securely. I have included my running config. I also need to configure the ASA to accept native Android VPN connections. I read the most popular thread that worked for a few users but while doing those modifications that is where everything went downhill. T
: Saved
:
ASA Version 8.4(2)
!
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
View 2 Replies
View Related
