I have 50 SSL Premium licenses on my ASA 5520 running 8.4. I want to run Anyconnect on IPAD- and IPHONE-devices but it seems that this requires a Mobile-license on top of the premium-license. Is it possible to receive an evaluation-license for this? It will take a few days to receive permanent licenses and I want to user this now.
View 1 RepliesI have ASA 5505 (8.4)I set up SSL AnyConnect VPN. I am able to connect from PC and MAC desktop computers using AnyConnect client but when I try use mobile device I am receiving error.Do I need buy the L-ASA-AC-M-5505=license?I see in description Platform: WindowsMy question is would it work with Apple mobile devices (iPhone, iPad)?
View 1 Replies View RelatedI have consulted a Cisco partner, as well as two different sources at Cisco and it seems remarkably difficult to find solid answers on anyconnect mobile licensing. I've got a pair of 5550s running 8.3.2 in active/standby. Based on the following license configuration, what do I need to support mobile clients? Anyconnect for mobile is obvious. Essentials? Since changes in 8.3 can I get away with one anyconnect for mobile license or do I need one per firewall? How many mobile clients would I be licensed for, 2500 per firewall? [code]
View 6 Replies View RelatedWe have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones. [code]
View 2 Replies View RelatedI have an SSL VPN set up on my ASA 5520 with a self signed cert. When I run the AnyConnect install on my desktop machine I have click through a few windows to accept the certificate. When I connect through the mobile client on Android, the connection goes right through without a prompt to import/choose/download a certificate. I'm able to connect but I'm wondering if the phone has actually recieved a certificate. I'm in the 'Advanced Connection Editor' screen and the certificate setting says "Automatic".
View 2 Replies View RelatedI need to activate AnyConnect SecureMobility client on an IPAD. I have an ASA with the below feature licenses:
[code]...
This platform has an ASA 5520 VPN Plus license
As I've understood that I need the ASA-AC-M-5520 license for each IPAD used but they mentioned that we need also the Essential or premium license to be activated on the ASA as well. As shown above, I have the "VPN Plus license" activated on the firewall.
Cisco release the Cisco Prime LMS 4.1 on Aug. 2011. I download the lms4.1 from cisco and install it, but the lms4.1's evaluation license expire date is Oct. 28 2009. So my license already expired after I install the LMS4.1.
View 1 Replies View Relatedwe have installed an evaluation version of Cisco Works LMS 4.0.1. Now we have purchased a license, but the evaluation period is over and I can't start the application anymore. Is there any possibility to install the license file after the evaluation period?
View 2 Replies View RelatedI want to turn on EIGRP functionality on my layer 3 3750 stack. I noticed I was only running an IPBASE license. When I do show license all I notice I have an evaluation of IP SERVICES image (see output below). Can I use this evaluation license? Would it be same as the full license or would it have limited functionality? Also, how do I make it the active license?
Q9-Switch#sh license all
License Store: Primary License Storage
Store Index: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
License Store: Evaluation License Storage
Store Index: 0 Feature: ipservices Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Priority: None
License Count: Non-Counted
I'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedDoes the windows mobile OS 6.5 has its own Cisco AnyConnect VPN package?
View 1 Replies View Relatedhow to configure AnyConnect on an ASA5505, but I wanted to check before to make sure I was going the right direction.
Setup: I have a very simple setup and basic goal. I currently just have one laptop on E0/1 of my ASA5505 and then the ASA configured with a static IP plugged to the Internet. I have the ASA correctly configured and can browse the web through the laptop. I also have the AnyConnect and AnyConnect Mobile licenses as well.
Goal: I want to set up AnyConnect on the ASA5505 and just establish a successful connection from an android mobile device running the necessary AnyConnect software from the market.
There are lots of guides for specifc set ups, but as described, I want to keep this as simple as possible.
[URL]
Also, I'm more comfortable with the CLI. Is it simpler to use the ASDM wizard for this?
I am setting up an ASA5505 to allow a VPN with certificate from AnyConnect Secure Mobility Client (iPad)However I get a "No License" message back from the ASA, on the iPad - Anyconnect.I remember reading the ASA5505 came with two licenses.
View 8 Replies View RelatedI'm a bit lost with licensing.I have an ASA 5510 and I would like to be able to use mobile devices (iOS/Android) with anyconnect. [code]
my cisco contact said me : "you need only ASA-AC-M-5510"
we have ASA 5510 with IPS and base license. Now we need Anyconnect support for more than 2 users.
Is for Anyconnect (tunnel-mode) only the Anyconnect Essentials license enough? Do I need a license for SSL VPN peers? What about Anyconnect clientless, I see that I need a premium license? Is this one enough ASA5510-SSL50-K9? It is really expensive in comparison with Anyconnect Essentials.
Here is my sh ver output:
Licensed features for this platform:Maximum Physical Interfaces : Unlimited Maximum VLANs : 50 Inside Hosts : Unlimited Failover : DisabledVPN-DES : Enabled
[Code]....
I currently have a HA pair of ASA5510's, as I understand it the 2 free premium licenses can be used by the mobile client as long as the ASA has the license for the mobile clients?
Can any one confirm that my understanding is correct, or would i need to buy a seperate Premium license a long with the mobile client license to enable this functionality?
Running ASA ver 8.6(1)5.Question is do I need a license to run anyconnect from our Android platforms?
Currently have the following licenses installed Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 500 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
[code]....
I'm planning to upgrade Cisco ASA 8.2 to an anyconnect essentials and mobile license. Are there any concerns with some users continuing to utilize the cisco vpn IPSEC client while others migrate to the Anyconnect? I just want to make sure when I upgrade the license that there will not be an immediate requirment to have all users switch to Anyconnect immediately.
View 2 Replies View RelatedI have a base 5505 and would like to get AnyConnect working. To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?
View 1 Replies View RelatedOur customer has purchased 2 x L-ASA-AC-E-5520= Anyconnect Essentials VPN Licenses (750 Users)Ive installed both activated licenses as per the cisco guides, I didnt get any errors on the install. I did a reload on both, they are both back up and running as active/standby but when I do a sh ver the license still shows "ASA 5520 VPN Plus License"Am I being dumb and has this worked successfully or should it not now display Anyconnect when I do a sh ver?
View 8 Replies View RelatedCan i buy a plus license for asa 5520??
View 2 Replies View RelatedWe have a Cisco ASA 5520 with the VPN Plus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the Cisco VPN client which works on Windows Platform, but we also have MAC OS 10.7 which works only with Cisco Any connect.
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Any connect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password. I joined a SH VER of my ASA, what is wrong on the license or perhaps it's a configuration problem?
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
[Code]....
2 x ASA5520 with SSM20 . using AnyConnect 3 , users are not getting disconnected from ASA even after the vpn client is closed . Users would not be able to login from the same ip until the session is active. Manual clearing of the session enable the user to log back in .
View 1 Replies View RelatedDo I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license. Does that mean I can download the security plus license? Or do I even need it on the 5520.
View 2 Replies View RelatedI have got ASA 5520. I am planning to install Cisco ASA AIP SSM-20 and Cisco ASA Content Security and Control (CSC) Security Services Module on ASA 5520.. However I am also thinking of adding AIP only as I can do the function of content filtering with proxy server. Relating this issue I would like to ask -
1. What would be the benefit of adding CSC ?
2. Do I have to pay the license cost every year for both of these SSM? What would be the cost ?
3. Upto how many SSM can I add into ASA 55020 ?
I have a query regarding MAC authentication for end systems on ASA 5520. Inspite of proving MAC address in endpoint authentication along with AAA, only AAA attribute policies are getting created. MAC authentication is not happening.
Is there any requirement like LDAP or AD is required for MAC authentication?
I have an ASA 5520 soft 8.2(3) when i try to configure the any connect I don't get the SSL and the telnet options for the connection. bare in mind that i don't have the any connect software on my asa nor do i have any certificate. is it essential to get a certificate. do i have to buy it knowing that it will only be used by our company's partners. if not how do i get it
View 1 Replies View RelatedI have a running ASA5520 in my network and recently we plan to add a failover pair as a standby unit for the running asa. Both of the ASA have the same specs and software. the only thing that the soon to be secondary ASA does not have is the AnyConnect Essential license. is it still possible for the unit to be the standby unit?
below is the license capture from both of the unit.
Running ASA:
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 150
[Code].....
According to the link here:[URL]Starting with Version 8.3(1), it no longer needs to install identical licenses. Typically, we only buy a license only for the primary unit; for Active/Standby failover, the secondary unit inherits the primary license when it becomes active.So I wanna know if there's some additional configuration to synchronize the licenses such as SSL VPN or Context between the primary one and the second one? Or they can just synchronize by default as soon as I finish the failover configuration and when the primary one gets down, the second one will take over the role including licenses automatically?
View 4 Replies View RelatedWe are currently using Cisco VPN Client. I'm looking to migrate to Cisco Any Connect. Our ASA 5520 has 750 IPSec and 2 SSL license. I also have approximately 40 IPSec site to site VPN's on this. ,Will anyconnect interfere with the site to site tunnels?,If I setup anyconnect with the IPSec instead of SSL do I still need to purchase the premium or essentials license?,Lets say if I do have to get the license and I get essentials will it cause any issues with the site to site VPNs?
View 2 Replies View RelatedWe have an ASA 5520 with two VPN profiles working fine.Since some users are now working with Windows 8, VPN clients for Cisco ASA is not able to connect.I have read there are problems for such VPN Clients in that OS, and I should use now Anyconnect for them to connect. I thought we had anyconnect working also, because some users can connect to a web page they can do some kind of connections to internal servers, (web, telnet, rdp, etc) so I installed cisco anyconnect VPN client in a laptop and try to connect (same IP and port I used for that web page) but after signing I get the message AnyConnect is not enabled on the VPN Server.So I tried to follow a configuration guide for Anyconnect, but there's a step in which I am trapped, these are the steps: Click Configuration, and then click Remote Access VPN.
View 7 Replies View RelatedMy client is upgrading from anyconnect 2.5.2014 to 3.1.00495. The ASA is running ASA 5520 version 8.2(5)33 and is in an active/standby failover pair.when trying to push out the new 3.1 from the pair to windows 7 and XP machines, he gets the error "Failed to get configuration from secure gateway. Contact your system administrator". When he tries to push 2.5.2014 and 2.5.6005 out from the pair this works fine.When pushing the 3.1 out from a stand-alone test ASA 5520 it works fine.
View 2 Replies View Related