we have installed an evaluation version of Cisco Works LMS 4.0.1. Now we have purchased a license, but the evaluation period is over and I can't start the application anymore. Is there any possibility to install the license file after the evaluation period?
View 2 RepliesI have a D610 Laptop with integrated Bluetooth and Wifi. The evaluation period has expired. Please obtain a license for this version of Bluetooth Stack for Windows by Toshiba."
I had called Gold Support last week and was asked to download/install the driver from the support downloads site and then download/install the patch as well. The bluetooth manager does not come up when this popup shows.
Cisco release the Cisco Prime LMS 4.1 on Aug. 2011. I download the lms4.1 from cisco and install it, but the lms4.1's evaluation license expire date is Oct. 28 2009. So my license already expired after I install the LMS4.1.
View 1 Replies View RelatedI want to turn on EIGRP functionality on my layer 3 3750 stack. I noticed I was only running an IPBASE license. When I do show license all I notice I have an evaluation of IP SERVICES image (see output below). Can I use this evaluation license? Would it be same as the full license or would it have limited functionality? Also, how do I make it the active license?
Q9-Switch#sh license all
License Store: Primary License Storage
Store Index: 0 Feature: ipbase Version: 1.0
License Type: Permanent
License State: Active, In Use
License Priority: Medium
License Count: Non-Counted
License Store: Evaluation License Storage
Store Index: 0 Feature: ipservices Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License Priority: None
License Count: Non-Counted
I have 50 SSL Premium licenses on my ASA 5520 running 8.4. I want to run Anyconnect on IPAD- and IPHONE-devices but it seems that this requires a Mobile-license on top of the premium-license. Is it possible to receive an evaluation-license for this? It will take a few days to receive permanent licenses and I want to user this now.
View 1 Replies View RelatedI'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
we have a customer with a ASA 5510 with a CSC module in it. The device tells us the Base license has expired. The new license has been renewed - after - the grace period. The Trendmicro site tells us the Base license is valid until 21 october 2013 but the CSC refuses to acknowledge this. The module is able to fetch updates form the Internet so it does not look like a connection problem to me (it also has a plus license which is also valid till far into 2013 and that one works).Is it possible that the current license key is "dead" and the CSC expects a new license key because the grace period was expired?
View 1 Replies View RelatedI am wondering if i can install the LMS in two servers using one license not two?
Also i want to know if i can manage the same set of devices in both servers if they are using the same license or this will not work?
Should i select specific ranges of IP's for both server and in this case, i can use two servers with the same license?
I am planning on installing Clean Air Wireless network, using WLC 5508, WCS(with plus license) and MSE.
Which MSE license i need to get this to work ?
I'm trying to install performance license on ACE 4710 appliance and it was failed. [code]
View 11 Replies View Related i installed Data license(Evalutation) initally it took the license after reload, when i enter sh lic command the out put shows that Data license is installed and valid for...
But when i run sh ver command it only shws ipbase license and not the data license
I recieved my IPS module license for my ASA 5525 . I enetered the key via the ADSM and it prompted me to restart the firewall .. After that i cannot get into the firewall via the ASDM .
View 3 Replies View Relatedwe recently purchased L3 daughter cards (N55-D160L3-V2) for our 5548UPs along with the LAN Enterprise Services licenses (N55-LAN1K9).
I installed the cards and Ent Svcs lic this past weekend and everything went well excep that I couldn't enable the EIGRP feature .. apparently EIGRP requires the LAN Base (N55-BAS1K9-BUN) license even when you have the Enterprise lic installed, so I was able to dig up that license eventually (which comes with the L3 daughter card, incidentally). Another side effect of not installing the Lan Base lic is that the L3 card/module will be in an "offline" state until the Lan Base lic is installed. Either way, everything was working normally in L2 mode at this time.
So, here I was thinking I was ready to proceed with enabling L3 - this morning I installed the LAN Base license on one of the 5548s which apparently triggered the L3 Daughter card module to go active and triggered a switch reboot. Ok, not that big of a deal, knew that was probably coming. I expected the switch to come back up normally .. NOPE. The switch went into a continual reboot cycle where the console prompt would appear, then about 30 seconds later, would reboot again.
I finally ended up re-installing the original L2 card and the switch came right up. I see that LAN Base and LAN Enterprise are both still installed as well.
What have I done wrong here? Why did the switch go into a continuous reboot cycle once I installed the LAN Base license?
Here are more details :
Software
BIOS: version 3.5.0
loader: version N/A
[Code]....
I would like to install the LMS 4.1 (EVAL-LMS-41), the evaluation one, and want to know what are the minimum and recommended requirements for a Windows machine.
View 1 Replies View RelatedI'm running LMS 4.0 as an evaluation and I'm only discovering 86 devices, using the auto discovery. I've added a seed and although it sees lots of neighbours on that seed it only goes on to discover devices off a particular range. All the devices are set up the same way (standard config) so it should see them as well.
I know it has a limit on the number of managed devices of 100, and I could understand if it hit 100 and then stopped. We have around 500 devices in total (not including phones, DMPs, etc).
I've just added the seed and selected cdp as discovery method and set the snmp target as *.*.*.*. Is there anything else I should be doing?
I wonder if the following PartNumbres below can do the installation of Cisco Prime LMS 4.2
File Information Release Date Size
LMS 4.2 Evaluation Software for Windows lms-4-2-Win-eval.zip 13-FEB-2012 2116.22 MB
I've setup a Cisco Secure ACS server 5.1 in VMware ESXi everything seems to be working fine, however under the options for Policy Elements > Authorization and Permissions > Device Administration > Command Sets there is a command called "DenyAllCommands" that was there when i first installed the ACS. Is there any way to remove this? When I try to remove it i get an error that thats it can't be removed or modified. I'm writing a report on the Cisco ACS for university, if this is a limitation of the evaluation licence I will need to reference it. If this is a limitation and provide a link to a cisco page that confirms this.
View 2 Replies View RelatedI have downloaded the 90 day ISE evaluation to a vmware platform I have it successfully authenticating local user(s) onto a Cisco 2940 device (12.1) IOS I am trying to follow a TrustSEC design guide [URL] but my LAB 2940 does not support many of the commands shown in this document What I want to try to do is be able to familiarise and demonstrate in the lab the use of ISE to control access to the network using 802.1X and or VPN access from remote vpn clients?
View 2 Replies View RelatedWhat's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
I have Windows XP Pro SP3. After a random period of maybe 30 mins to a few hours, my internet connection seems inexistant. PC reacts like there is no internet cable plugged in. I've checked the ipconfig command in command prompt before my internet shuts down and after and there was a change. A few lines(IPs) were missing after my internet fell.
View 9 Replies View RelatedWe have a VPN 3000 that we use to connect. We are recieving reports that some of the users are connected but after a set period of time they are disconnected. Is there any changes that I could look at in the VPN 3000 that could point me in the right direction.
View 3 Replies View RelatedI have a Cisco 2911 router with 4 T1 connections. Two are set as a multilink and the other two are for two other locations. The router will run fine, but after a month I cannot ping the gigabit ethernet 0/0 interface. I would have to manually reboot the router to get it to respond again. Before I noticed a lot of interface discards which would shutdown the 2911 and a manual reboot would be needed, but for this time it isn't the case. Where would I start with this the memory and cpu usage are fine.
Here is the config:
Current configuration : 2905 bytes
!
version 15.0
[Code].....
I have a question about managing the Access Point:
-WLC2504
-AIR-LAP1262N-A-K9
First: I need the access point works by period, example: 08:00AM - 06:00PM after that disable the radio and return work next day at 08:00AM
Second: Also, if the radio no activity for a long period (e.g 60 or 120 minutes), disable the radio interface.It's possible with the WLC? Or maybe need implement one NCS?EnergyWise Technology - but, I only need "shutdown" the radio not the Access Point completely.
I'm using ASA 5510 and I wondered if we can configure reporting to know the traffic on each interface,the attacks,the vpn connection during a period ( 1 week or 1 month). For the moment, we can see these logs only in 'real time' .
View 1 Replies View RelatedEvery other day and sometimes everyday I have an issue where my network slows down in one area at around the same time of day 12:00pm. I am using Solarwinds and I don't see anything significant showing up.
View 2 Replies View RelatedI have a new Win 7 Dell Precision Workstation that will not log in to my domain. I get an error that there is no login server available if I attempt to log in using a domain account. I log in as the local admin and then try to join a domain using the Join a Domain or Workgroup wizard. I then get an error stating "this operation returned because the timeout period expired". I have had to reset my core switch to get a couple of the new boxes (including this one) to even join the domain. I also show no internet in the Network and Sharing Center most of the time.
View 2 Replies View RelatedSo, I just upgraded my mobo/cpu (Z77A-G45 and i5-2500k) and I'm having an issue with my connection as it seems to drop every 5 to 15 minutes constantly and have no idea what exactly is wrongThe kicker is my old mobo did the same thing and I had to do something in win7 to fix it (not sure if it was the drivers or what) but I just can't remember what exactly.
View 1 Replies View RelatedMy XP Pro SP3 PC is connected to a Netgear DG834N modem/router via Ethernet. If the PC is left for say 4-5 hours the ability to connect to websites disappears. The browser just hangs and it's the same with IE and Firefox The odd thing is I can still ping websites by domain name without trouble. So the interenet connection is actually still in place.The problem is consistent and repeatable.Throughout this I have a second XP Pro SP3 PC also connected to the router via Ethernet and it works perfectly.
View 2 Replies View RelatedI have a Cisco 3845 with the archive command configured:
archive
path tftp://x.x.x.x/$h
write-memory
time-period 60
The archive command works with the execution of the write mem, but with the "time-period" doesn't work.This is the show version of my 3845:
NTP_Server#SH VER
Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: [URL]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 23-Mar-06 01:59 by pwade
[code].....
Region : India
Model : TD-W8151N
Hardware Version : Not Clear
Firmware Version :
ISP : MTNL
my ADSL light doesn't get on during my afternoon hours...after so many try too it get switch on after somewhat 5-6pm...
Just replaced a WRT54GS with an E2500. It seems that anytime a connected device goes "idle" for a while, the connection breaks or severely reduces and it's nearly impossible to get the connection back without performing an action at the device in question. Let the wireless connection on my laptop go unused for some period and it reduces to 1Mbps and you can't get back on by just using the link more... you have to do a "repair".
Let more than a few minutes pass since you've printed something on the wireless printer and you MUST go to the printer to re-establish the connection by turning the antenna off and then on again.Basically the same problem with my blueray/DVD getting on the network. When I shut the screen off on my phone, the wifi dies and receives NOTHING over that link while the screen is off.
None of these behaviors existed with the WRT... just the 2500. Background/facts - current firmware, DHCP with reservations, WPA2/per, MAC filtering in use, UPnP disabled. MTU/Beacon/Frag threshold/RTS threshold set per recommendations on this site.
I got this error this operation returned because the timeout period expired error code 0x000005b4
View 1 Replies View Related