Cisco Firewall :: ASA 5520 / License Cost For AIP?

Nov 27, 2011

I have got ASA 5520. I am planning to install Cisco ASA AIP SSM-20 and Cisco ASA Content Security and Control (CSC) Security Services Module on ASA 5520.. However I am also thinking of adding AIP only as I can do the function of content filtering with proxy server. Relating this issue I would like to ask -
 
1. What would be the benefit of adding CSC ?

2. Do I have to pay the license cost every year for both of these SSM? What would be the cost ?

3. Upto how many SSM can I add into ASA 55020 ?

View 6 Replies


ADVERTISEMENT

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco Firewall :: Can Buy Plus License For ASA 5520

Jan 11, 2012

Can i buy a plus license for asa 5520??

View 2 Replies View Related

Cisco Firewall :: Do Need Security Plus License To Do HA With Two 5520

Mar 7, 2011

Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license.  Does that mean I can download the security plus license?  Or do I even need it on the 5520.

View 2 Replies View Related

Cisco Firewall :: 5520 - ASA Failover Pair With Different License

Apr 15, 2013

I have a running ASA5520 in my network and recently we plan to add a failover pair as a standby unit for the running asa. Both of the ASA have the same specs and software. the only thing that the soon to be secondary ASA does not have is the AnyConnect Essential license. is it still possible for the unit to be the standby unit?
 
below is the license capture from both of the unit.
 
Running ASA:
Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 150     

[Code].....

View 3 Replies View Related

Cisco Firewall :: Failover License Sync Between Two ASA 5520?

Jun 3, 2013

According to the link here:[URL]Starting with Version 8.3(1), it no longer needs to install identical licenses. Typically, we only buy a license only for the primary unit; for Active/Standby failover, the secondary unit inherits the primary license when it becomes active.So I wanna know if there's some additional configuration to synchronize the licenses such as SSL VPN or Context between the primary one and the second one? Or they can just synchronize by default as soon as I finish the failover configuration and when the primary one gets down, the second one will take over the role including licenses automatically?

View 4 Replies View Related

Cisco Firewall :: ASA 5520 - Failover In Off State After Applying New License

Mar 24, 2013

We apply a new anyconnect mobile license to our primary asa 5520 and the failover feature went into an off state. WE have now applied a second purchased anyconnect mobile to our secondary asa but the failover is still inactive/off.
 
bcoh1fw50# sh failover state 
State          Last Failure Reason      Date/Time
This host  -   Primary
Disabled       Ifc Failure              14:43:21 EST Jan 30 2013

[Code].....

View 3 Replies View Related

Cisco VPN :: ASA 5520 - VPN Access And License

Jan 22, 2012

We have a Cisco ASA 5520 with the VPN Plus License and 8.04 IOS installed, we want to set up vpn access to our users. We can use the Cisco VPN client which works on Windows Platform, but we also have MAC OS 10.7 which works only with Cisco Any connect.
 
I am a little bit lost with all the client and the license, actually we can't setup more than 2 vpn session with an Any connect client installed on MAC or Windows. The authentication is by Certificate, the first two connect fine, but the third one don't connect and prompt for a username / password. I joined a SH VER of my ASA, what is wrong on the license or perhaps it's a configuration problem? 
 
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)  
Boot microcode   : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03 
[Code]....

View 3 Replies View Related

Cisco VPN :: 5520 AnyConnect VPN Phone License

Apr 20, 2012

We have bought L-ASA-AC-PH-5520=Anyconnect Vpn Phone License for our Cisco Phones but when we entered this license into our ASA it shows th following i.e enabled for linksys phones. Is there a diff part no to enable vpn for cisco phones. [code]

View 2 Replies View Related

Cisco Wireless :: ASA 5520 - Evaluation License For AnyConnect Mobile

Mar 9, 2011

I have 50 SSL Premium licenses on my ASA 5520 running 8.4. I want to run Anyconnect on IPAD- and IPHONE-devices but it seems that this requires a Mobile-license on top of the premium-license. Is it possible to receive an evaluation-license for this? It will take a few days to receive permanent licenses and I want to user this now.

View 1 Replies View Related

Cisco VPN :: 5520 - AnyConnect Secure Mobility Client License?

Mar 1, 2011

I need to activate AnyConnect SecureMobility client on an IPAD. I have an ASA with the below feature licenses:
 
[code]...
 
This platform has an ASA 5520 VPN Plus license
 
As I've understood that I need the ASA-AC-M-5520 license for each IPAD used but they mentioned that we need also the Essential or premium license to be activated on the ASA as well. As shown above, I have the "VPN Plus license" activated on the firewall.

View 1 Replies View Related

Cisco Firewall :: Is ASA 5510 Firewall Required Any Subscription Or License

Nov 15, 2012

I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?

View 1 Replies View Related

Cisco Firewall :: ASA 5500 - Get Firewall License To 500 Users?

Jan 25, 2012

I purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
 
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
 
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y  with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)

View 1 Replies View Related

Cisco LAN :: 6509 / 2950 - Root Port / Cost

Dec 31, 2011

On a production 6509, I am seeing this:
 
RTR-01#sh spanning-tree int gi2/3 rootVLAN0001         0VLAN0010         0VLAN0011         0VLAN0012         0VLAN0013         0VLAN0014         0VLAN0015 [ code]....

Now I thought the command  "sh spanning-tree int gi2/3 root" showed cost to the root bridge.  So with everything being zero, its implied this the root, which it is but not for vlan 111 and actually all 1XX Vlans have a different root.  Why does vlan111 show its root as out int gi 2/3 but the root cost shows zero?
 
Issue is we have a issue where a 2950 is acting as root bridge for our wireless vlans, wrong....it should be the 6509, but before I change it over, was wondering about the root port/cost question.

View 1 Replies View Related

Home Network :: Want To Run Three Phones In One Line Cost

Apr 16, 2013

I have signed up with Axvoice for cheap voip calls. My problem is I am trying to use three phone sets with the same adapter (grandsteam HT 286). In accordance with Axvoice's live support instructions, I have plugged the main phone jack of my house into that adapter. I am getting crystal clear voice quality in one phone set. That obviously indicates, there is no problem with the service. However, on two phone sets, voice is not clear and I am having noise and sudden call breaks. I have checked all the ports but could not find anything. I am jobless right now.

View 2 Replies View Related

Cisco WAN :: Load Balance Between 2 3750 Switches With Equal-cost Paths

Jan 16, 2012

I have two offices in rural area with a quite distance between them. Offices are connected with private wireless 100Mbps and cooper 100Mbps links provided by different ISP. Wireless connections are delivered as a private L3 Ethernet link but cooper as private L2 Ethernet trunk link. In both offices I have Cisco 3750 L3 switches. I would like to use both link (equal-cost paths) in load balanced configuration but not sure how. Both switches running EIGRP. Asymmetric routing is not an option. Per-destination load-balancing or something else?

View 5 Replies View Related

Cisco WAN :: 1812j How To Limit Dialing Based On Amount Of Communication Cost

May 18, 2011

I have 1812j with ISDN line.Recently Accidentaly the ISDN Router was dialing every 1 minute because of the config was not right.It was too late to find out.And I got the expensive bill from the telephone company.
 
The idea is I want to stop dialing if the dialing cost is over than appropriate amount.For example, if dialing cost reach to $200, then stop dialing and alert to the system administator by E-mail or something.There is the way to limit the timed-out but this won't work for that.

View 3 Replies View Related

Unequal Cost Path Load Balancing With Static Routes?

Jul 20, 2011

Can it be done? Load balancing across static routes with different administrative distance? Like EIGRP.

View 9 Replies View Related

Cisco :: Implement Unequal Path Cost Load Balancing Without Using EIGRP Protocol?

Jun 23, 2012

Is there a way to implement unequal path cost load balancing without using EIGRP protocol?

View 8 Replies View Related

Cisco Switching/Routing :: 4096 / Path Cost And Priority For Spanning Tree

May 8, 2012

May I know how to manually set the priority (root ID and bridge ID priority) and  for spanning tree? Which one should I use based on the command below? and how does it affect the path cost of it?
 
set spantree root 1
spanning vlan1 priority 4096

View 5 Replies View Related

Cisco Switching/Routing :: 6500 VSS Architecture With Two Equal Cost Paths To A Destination?

Apr 29, 2012

I have a query on how the 6500s running in VSS mode would route the traffic over an OSPF environment where it has leant about two equal cost paths, but one via the 2nd chassis.Proposed setup - 2 6509s running in VSS. Switch-1 in VSS has a layer 3 connection (via a LES circuit) to one of a pair of Nexus 7Ks at another office. Switch-2 in the VSS has another layer 3 connection (via LES by another provider) to the other N7K at the other office. The L3 connections would use /30 ranges and allow each Nexus to form an ospf neighbour relationship with the VSS. We want to keep both offices environments separate so although we do have L2 circuits we're using these to provide L3 connectivity between sites & exchange routing info via them using ospf.

Each Nexus will advertise all the directly connected networks it knows about to the 6509s running in VSS. Thus I couldn't figure out if for example we have users/servers behind our VSS 6509s, these would need to go via their default gateway to get to a network located off the LAN, the default gw ip in VSS setup exisits on the control plane on switch-1 (in normal operation). Then to get to a network that is located off the Nexuses at the other site it would have 2 equal cost paths to it, however one of these paths would be via the VSL link and off the switch-2 chassis. I wasn't therefore sure if we'd actually ever see any transmit traffic via the 2nd L3 connection because I have a funny feeling that I've read the VSS always choses the local chassis egress rather than going via the VSL to use another port...
 
All of the above is theorectical at the moment as currently both circuits are connected to a single Nexus/6509 chassis however for improved resilence I want to move one of the circuits to be physically attached to the other Nexus & 6509 chasis at each site but I wasn't then sure how the traffic flows would be affected.

View 2 Replies View Related

Cisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices

Apr 3, 2013

I’m stuck in some problem with installation of LMS4.0 in customer site.
 
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
 
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?

View 3 Replies View Related

Cisco Firewall :: Different Between ASA-5520-K9 And ASA-5520-K8

Nov 2, 2012

We were using ASA-5520-K9 with  ASA-SSM-AIP-20-K9 but recently found some hardware problem in our running ASA. Now cisco want to replace with ASA-5520-K8.

View 1 Replies View Related

Cisco Firewall :: Getting CSC-SSM-20 Renewal License?

Jan 10, 2012

i have CSC-SSM-20  i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
 
ASA-CSC20-750UP-1YASA 5500   CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
  ASA-CSC20-750P-1YASA 5500   CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr) 

View 2 Replies View Related

Cisco Firewall :: See License For The SSM-10 Card?

Mar 25, 2013

My customer is asking to see the license for the SSM-10 card how do i access the card to show this information. the Firewall unit has a base licence installed.

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - 3 DES License

May 20, 2013

I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
 
Cannot communicate securely with peer: no common encryption algorithm(s).
 
(Error code: ssl_error_no_cypher_overlap)
 
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.

[Code] ......

View 4 Replies View Related

Cisco Firewall :: ASA5505 - Can NAT May Be Used For More Than 10 Users With License

Apr 20, 2012

I have 10 user license for Cisco ASA, i have to use this ASA for client connectivity. Can i do NAT of more than 10 users with this license? What i understand is NO.

But as per Below explaination looks like, i can if i am not doing default routing? Actually i just need to add a specific Route towards client DMZ interface on my ASA, no default route, so can i use more than 10 concurrent sessions with this license?

View 5 Replies View Related

Cisco Firewall :: Unable To Upgrade Pix-525 FO License?

Feb 10, 2012

Not  abe to upgrade the IOS image PIx7.0  from earlier version 6.3   in  to my old Pix-525 FO(Secondary unit) license box .
 
Is it possible to upgrade without Primary unit (Unrestricted License)  ?

View 6 Replies View Related

Cisco Firewall :: Security Plus License For ASA5505

Jul 2, 2012

I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
 
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!

View 11 Replies View Related

Cisco Firewall :: Upgrade License On ASA 5510?

Oct 12, 2011

I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license  (ASA5500-SSL-250) for the standby unit.

View 3 Replies View Related

Cisco Firewall :: ASA5505 Which License Is Needed

Jun 8, 2011

I have a spare ASA5505 w/Base License that we want to use as the router/firewall between our wi-fi network and our secondary internet connection. Currently we have a NetGear box as the router there and it is on its last legs.  In order for the ASA w/Base license to be able to issue over 150 IP address via DHCP which license do I need to purchase for it.

View 7 Replies View Related

Cisco Firewall :: ASA5505-SW-10-UL - How To Upgrade License

May 10, 2011

I want to confirm if the upgrade license (ASA5505-SW-10-UL=) is backward compactible with PIX 501 firewall device? though pix 501is end of life bit i want to verify if the upgrade license for asa5505 will work with it?

View 4 Replies View Related

Cisco Firewall :: 5510 CSC Base License

Jan 27, 2013

We have purchased an ASA 5510 with CSC module. Unfortunatelly, white envelope with PAK for activation a Base License was lost before we managed to register it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved