Cisco VPN :: Windows RT VPN To ASA 5510?
Mar 26, 2013I basically want to get windows rt vpn to connect to the asa 5510.
View 1 Replies
ADVERTISEMENT
Cisco VPN :: ASA 5510 With Windows XP And Windows 7 VPN Clients
May 10, 2010We have a working configuration for L2TP-IPSec connection from a native Windows XP client to the ASA 5510. When trying to set up a connection from a Windows 7 client, the connection fails with the message that all SA proposals are unacceptable? Is this coexistence possible, and what parameters would I have to change to get this working. I have understood that the Windows 7 client requires som higher security proposals, but have not found what these are. And at the sam time we are concerned about not destroying the VPN connection for our existing XP clients.
View 8 Replies View RelatedCisco VPN :: ASA 5510 - Using ASDM With Windows 7 Not Working
May 9, 2010I have the ASA 5510, I just upgraded to Windows 7 and installed the ASDM software. The installation went smoothly but when I launch ASDM all that comes up is the top right of a window, here is a screenshot of what happens.
View 15 Replies View RelatedCisco VPN :: 5510 Using AnyConnect On Tablets Run Windows 7
Jan 11, 2012We have a SSL Gateway setup with the anyconnect client.We have picked up on some of the Windows 7 Tablets that you can install via the web page.Once installed you are connected to the network.However once you disconnect, and try with the anyconnect client u get the following error;
" Anyconnect was not able to establish a connection to the specified secure gateway. Please try connecting again"
We have not seen this on any of the Windows 7 laptops nor Windows XP.
The URL have been added to the trusted zones.We have gone as far to disable anti-virus / windows firewallDisabled the "Protected mode" with in internet explorer.
Anyconnect client version 2.5.3055..ASA 5510 Serial number JMX1504L05Y - ver asa841-k8
Cisco VPN :: ASA 5510 Cannot Connect - Windows ME Error 809
Aug 21, 2011I have a cisco ASA5510 and I'm having fun experience some configurations.I can not connect to VPN, windows me error 809. I configured the firewall to accept connections to microsoft L2PT/IPsec client by authenticating users on the domain controller LDAP.
Clientless vpn connection work, so the server connection is correct. [Code] ......
Cisco VPN :: ASA 5510 And Windows 2008 LDAP
Nov 15, 2011I have working config for 2003 server:
aaa-server DC1 protocol ldap
aaa-server DC1 (inside) host 172.25.29.9
ldap-base-dn DC=KIEV,DC=CC
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn CN=ASA_LDAP,OU=aides,OU=IT,DC=KIEV,DC=CC
server-type auto-detect
ldap-attribute-map LDAPVPNMAP
But when i created another aaa-server DC2 with the same config (different ip and name only), which is running under 2008 Server, i've got at debug:
Cisco VPN :: ASA 5510 Using Windows 7 Computer As NTP Server
Apr 29, 2012I have an ASA5510 connected to a computer running Windows 7 (the NTP Server) on its "inside" interface.Using the ASDM, I have configured the ASA5510 to use the Windows 7 as its NTP server (my architecture forces me to use a local machine as an NTP server):
-IP address: 192.0.99.1 (the ASA5510 has an IP address of 192.0.99.40)
-Interface: inside
-Key number: None
-Enable NTP authentication: no.
I have other Windows computers on the "inside" interface using the NTP Server, so NTP traffic is relayed without any problem. But somehow, the ASA5510 is not able to synchronize with the NTP Server.I see the following log entry:
-Source IP: 192.0.99.1
-Source Port: 123
-Destination IP: 192.0.99.40
-Destination port: 65535
-Description: Teardown UDP connection 3905 for inside: 192.0.99.1/123 to identity: 192.0.99.40/65535 duration 0:02:01 bytes 96
so it seems like the ASA5510 sends a request to the NTP Server, but I am not sure whether the reply doesn't get processed correctly, or the connection stays open too long (my UDP connection timeout is the default, 2 minutes).
I had trouble getting SonicWALL NSA2400s to use Windows 7 devices as NTP servers. I had to get a firmware version where there was no MD5 authentication (which I think is OK in this case), and change a setting in the Windows registry (HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/W32Time/Config/AnnounceFlags: from 0xa to 0x5)
Cisco WAN :: 5510 VPN Traffic Will Not Route For Windows Vpn Client
Jul 31, 2012I have an ASa 5510 and setup remote dial in users.
I wanted to use the windows 7 built in client and also the draytek site to site VPN options however when they connect VPN traffic will not work however when i use the cisco VPN client then everything works fine.
All the VPN's connect pretty quickly.In the syslog I a getting errors when i try and ping something: [code]
Cisco VPN :: ASA 5510 / VPN Client Unable To Add Routes In Windows 7
May 23, 2012Having an issue with the ipsec client being unable to add routes in Windows 7 while connecting to an asa 5510 running 8.3(2). Client connects, but the split-tunnel routes do not get installed on the OS. Vpn client versions used are 5.0.07.0290 and 5.0.07.0440 x64. The client status window shows that it received the split tunnel networks, but the log shows that the routes do not get installed with the following message:
Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 100: code 87
Destiantion 192.168.100.0
Netmask 255.255.252.0
Gateway 0.30.1.1
Interface 10.30.1.201
[code].....
Cisco Firewall :: ASA 5510 Block Sending Emails From Windows XP?
Apr 16, 2013I have cisco ASA 5510 with basic configuration (default policies). The problem is that windows XP users are unable to send emails form MS outlook and unable to log on to Hotmail , Gmail or any mailing site. While windows 7 and 8 users are not facing any problem.
View 2 Replies View RelatedCisco VPN :: 5510 - Client 5.0.07.0410 Not Working On Windows 7 Professional
Sep 7, 2011I'm having a wierd issue with the VPN client installed on Windows. Eventhough it connects and receive and IP address, I'm not able to access any of the servers on the remote network.
Is there any special configuration need it for it to work on Windows 7 proffesional?
The client works perfect with windows XP, we have a ASA 5510 Version 8.2(2) is in routed Mode
Cisco :: Site-to-Site From 5510 To 5510 One Dynamic One Static IP?
May 26, 2011I'm trying to figure out how to get two 5510 ASA's to establish a Site-to-Site VPN.The version with two static IP's is working perfectly and stable but I haven't figured out how to get a VPN running between a static and a dynamic IP
View 12 Replies View RelatedCisco VPN :: RV042 Quick VPN Windows 7 64 Without Windows Firewall
Aug 29, 2011I have an RV042 setup for quick vpn access.The remote computer in question is a win 7 64bit. The PC uses McAfee SAAS firewall. This disables the windows firewall.
1. I can connect to the vpn with SAAS disabled and windows firewall enabled.
2. I cannot connect to the vpn with both windows firewall and SAAS disabled.
3. I cannot run SAAS and windows firewall together to check if this would work.
I need to figure out what windows firewall is doing to allow the vpn to connect, and so how do this with windows firewall disabled. I can then leave the windows firewall disabled and enable McAfee SAAS.The message quickvpn provides when it fails to connect is that the remote gateway is not responding. The client logs show that the tunnel had been opened but it was unable to ping.
Belkin Routers :: Update F9L1101 N600 DB Wireless Dual-Band USB Adapter From Windows 7 To Windows 8
Nov 25, 2012My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
Sharing Kxp1121 From Windows 7 64bit To Windows Xp Pro 32bit
Dec 15, 2011My win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'
View 1 Replies View RelatedWindows 7 64bit Networking With Windows 2003 32bit?
Apr 18, 2012I wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies View RelatedCan't Logon To Windows 2003 From Two Specific Windows 7 Workstations?
Sep 18, 2012We have a network of approximately 20 computers, network printers, and one Windows 2003 Server (used simply as a file server). I have an issue with two specific Windows 7 Pro workstations that just will not logon. The username and password details we're using are correct, but the server rejects them. I can logon using the same account from any other Windows 7 Pro workstation, or Windows XP station, so I know the issue is specific to the two workstations communicating with the server.
Both afftected stations show Logon attempted by: MICROSOFT_AUTHENTICATION_PACKAGE_1_0 error 0xC000006A which all searches on Google point towards incorrect login credentials, however I've tried plenty of perfectly valid login credentials and they don't work either.I've tried checking that the 128bit option on the Windows 7 machines is disabled in file sharing etc.
Dell With Windows Vista Not Connecting To HP With Windows 7?
Sep 8, 2012using same network but don't see each other. Why?
View 2 Replies View RelatedSharing :: Windows Xp Home Cannot Connect To Windows 7?
Dec 31, 2011I have a win xp laptop which connects via wireless to a cheap belkin router I have a Win 7 pro laptop which is hardwired to the router. The Win 7 machine is NOT set up for home groups. We are all on the same workgroup.
I have added the user name from the XP machine to the Win 7 pro machine with admin rights. I shared a folder on Win 7 and added the user name and gave read/write rights. I have no software firewall.
When I try to connect via win explorer via the workgroup I see the Win 7 machine (after 10 seconds). I see 'User' folder which I can browse and I see the folder that I shared but I can't access it. Access denied...
Printer On Windows 98 Shared But Not Seen By Windows 7?
Apr 8, 2011Trying to share printer from old 98 with new 7 machine
View 1 Replies View RelatedWindows 7 Unable To Ping Windows XP?
May 20, 2011My Win7 laptop was unable to ping another WinXP within the same network. When I first got this Win7 laptop, I experienced this problem. The WinXP laptop has no problem pinging the Win7 system. A visiting friend changed the setting on the Win7 laptop and suddenly the two laptops were able to talk to each other. I wiped the WinXP laptop a few weeks ago. Since then, the Win7 laptop is again unable to ping the WinXP. I have googled for many hours now. I tried just about all the methods that make sense to me but still cannot ping from Win7 to WinXP. How I can reestablish communication between these 2 systems on the same network?
View 5 Replies View RelatedCannot See Windows 2008r2 Via Windows Explorer
Apr 20, 2012I have this test windows 2008 r2 server. I can connect to the internet on this server.However my client xp machine, cannot see the server via windows explorer. I can however ping the windows 2008 r2 server. Using the servers ip of 192.168.1.230 Another thing is I cannot also remote to the server on the internal LAN. Using RDP.I ve even tried with firewalls turned off on the server for some mins.
View 1 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedCisco :: ASA 5510 Resetting Itself?
Jul 18, 2011We have an ASA5510 which keeps resetting itself for no apparent reason. It does this several times a day and I cannot see any pattern to the times etc. I don't believe it is load related as it also happens overnight when very little is going through the device. When it happens the device just drops off the network (all interfaces) and then when it comes back a few minutes later we can see from the system uptime that it has in fact rebooted itself.I initially thought it was faulty hardware, so I swapped the device for another 5510, but that does the same thing. I then added a third 5510 and configured it in with the second one as an Active/Passive failover pair. Both devices do the same as the first, the only differences now is that the passive device kicks in and takes over, so we have a little less service disruption each time.
View 9 Replies View RelatedCisco VPN :: ASA 5510 - Twice NAT Config
Sep 11, 2011I'm running into and interesting issue concerning a twice NAT config.
We have a remote site that needs to connect to a server cluster on our end. Using ASDM I have created a NAT rule that uses PAT to map our server addresses to a single IP (this is due to constraints placed on us by the remote site). This in and of itself shouldn't be a problem. The issue is that the VPN tunnel won't come up unless I also map an address to the remote site's sever.
Example:
Appliance: ASA 5510
ASA Version: 8.4(2)
ASDM Version: 6.4(5)
Original Packet:
Source Interface: inside
Destination Interface: outside
Source Address: Server_Cluster
Destination Address: Remote_Server
Service: any
Translated Packet:
Source NAT Type: Dynamic PAT (Hide)
Source Address: Mapped_Server_Cluster_Address
Destination Address: Mapped_Remote_Server_Address
Service: -- Original --
Within the Translated Packet section, if I set Destination Address to the actual remote server address nothing happens when I attempt to bring up the tunnel. However, if I map an address to the remote server, the tunnel begins to come up and then fails during phase two (as the mapped address doesn't match the addressing that has been defined in the remote end's connection profile).
Initially I thought the issue may be due to an IP addressing overlap since both sites are running similar numbers, but the default route statement on our ASA, should contend with this issue. Also, each time I change the NAT rule, I change the connection profile to match those changes.
So, ultimately, what I wish to accomplish is to allow connectivity between my site and the remote site without having to map another address to their remote server. How may I do this?
Cisco VPN :: 5510 Vpn Client With No Nat
Jan 26, 2011i have a 5510 with a working VPN but discovered that anyone connecting from a public IP can connect to VPN but can't go anywhere.so if i have say a linksys wifi on my cable modem and a private IP i can connect no problem. but if i'm on like a verizon data card which gives me a public IP i can connect to VPN but receive the below errors in my asa logs and can not reach anything on the network.What do i need added to allow remote ends without a nat device to also work?
View 4 Replies View RelatedCisco WAN :: GRE Between Router And ASA 5510
Feb 8, 2011I have an 1841 at a remote site that terminates its ipsec vpn to an asa5510. I want to create a GRE tunnel to I perform the following on the router.
View 2 Replies View RelatedCisco WAN :: Upgrade IOS On ASA 5510?
Apr 20, 2011I am upgrading an ASA 5510 from ASA822-k8 to ASA841-k8. I know I have to upgrade the RAM to 1GB from 256MB, but was wondering if it is a direct upgrade, or do I have to step through some of the 8.3(x) versions?
View 2 Replies View RelatedCisco VPN :: ASA 5510 Don't Have Bytes Rx
Jan 2, 2013I have a problem with my vpn between two ASAs, I review the running config of two devices, but I couldnt see anything out of normal.As you can see in the image the VPN is up, but in the ASA 5510 I don't have Bytes Rx (ZERO), I tried to config again two ASAs but I have the same trouble.
View 19 Replies View RelatedCisco Security :: 2x ASA 5510 With AIP-SSM And CSC-SSM On Each One
Mar 23, 2012I want to ask for the possibility of configuration below? 2x Cisco ASA 5510 running Multi-Context mode and Active/Active Failover1 Cisco ASA 5510 (ASA 1) has AIP-SSM1 Cisco ASA 5510 (ASA 2) has CSC-SSMThere are 2 contexts, context A and context BASA 1 is the primary firewall for context A, and secondary firewall for context BASA 2 is the primary firewall for context B, and secondary firewall for context A
Can AIP-SSM on ASA 1 inspects traffic of context B which primarily runs on ASA 2?Can CSC-SSM on ASA 2 inspects traffic of context A which primarily runs on ASA 1?
Cisco VPN :: TLS 1.2 On ASA 5510 (Clientless SSL VPN)?
Feb 14, 2013I would like to ask if the ASA5510 can support TLS 1.1 above?On the ASDM it can only be chosen between SSLv3 or TLSv1.When "Negotiate SSL V3", the Active-X plugin can not be loaded (IE 9 with supported SSL v3). It seems that the plugin only works with TLSv1.Is there some roadmap for the TLS1.1/1.2?
View 1 Replies View RelatedCisco WAN :: Have 2 ISP Connections On ASA 5510?
Sep 18, 20111 isp connection which splits into two. One plugs into 5510 with ouside ip and the other plugs into the other 5510 with outside ip address.
see diagram below:
Router routes are set as:
ip route 0.0.0.0 0.0.0.0 10.x.x.1
##
ip route 10.x.x.0 255.255.255.0 10.x.x.2
We will be introducing another isp into our network. We want to remove our current isp and switch. But we dont want to do the cut overnight. We will migrate into our new isp. so for a while we will have both isp connections.
What i am thinking of doing is taking one of the ports on 10.x.x.1 and configuring it for our replacement isp network and the same for 10.x.x.2. Will that work?
Can i have ASA 5510 configured for 2 seperate ISP connections? What kind of route will i set on my router?
Cisco WAN :: Second Public IP On ASA 5510
Apr 7, 2013My ASA 5510 is configured with a single PUBLICIP1 on the outside interface. All internal hosts 192.168.0.x are behind the ASA firewall and NATed to PUBLICIP1 including a few site-to-site VPN tunnels. This is also true for DMZ. Now, I would like to add a second PUBLICIP2 to the ASA and map it to one internal host ONLY - For eg: 192.168.0.25. How can I do this without effecting the existing setup? Since my entire internal subnet 192.168.0.0/24 is NATed to an existing PUBLICIP1 how can I exclude just one host (192.168.0.25) and bond it to the PUBLICIP2 for all ports.
This is what my current OUTSIDE interface looks like.
interface Ethernet0/0
duplex full
nameif OUTSIDE
security-level 0
ip address PUBLICIP1 255.255.255.224
!