Cisco WAN :: 871 Router - Way To Split Network Into 3 VLANs?
Sep 12, 2011
I have a network that I want to split into 3 VLANs, One for the main traffic, another one for the kids so I can control the sites they visit via opendns and the 3rd for the playstation and the Wii. The catch is that I only want the kids network to access the printer and the NAS on the main network, and then the 3rd network not to be able to access the other 2 vlans. I am trying to perform this via a Cisco 871 router
View 1 Replies
ADVERTISEMENT
Jul 21, 2012
We have ASA 5520 acting as the VPN Server and Cisco 1941 router as EZVPN client. Since last few days client is not able to establish vpn connection. 1941 router is continuously generating the below log messages
001569: Jul 22 12:19:05.883 ABC: %CRYPTO-4-EZVPN_SA_LIMIT: EZVPN(VPNGROUP) Split tunnel attributes(51) greater than max allowed split attributes(50)
001574: Jul 22 12:19:07.835 ABC: %CRYPTO-6-EZVPN_CONNECTION_DOWN: (Client) User=vpn_user Group=VPNGROUP Client_public_addr=<client public ip> Server_public_addr=<server public ip>
004943: Jul 22 11:32:42.247 ABC: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
View 3 Replies
View Related
Oct 9, 2012
I need to split a network: 10.0.4.0/24 into 3 subnets with the following hosts per subnet:
Subnet 1: 80 hosts
Subnet 2: 10 hosts
Subnet 3: 120 hosts
split into 3 subnets?
Im thinking something like this:
Subnet 1
Network 10.0.4.0
Subnet Mask 255.255.255.128
[Code].....
View 1 Replies
View Related
May 1, 2012
I need to split a client's current LAN into 2 LANs so that the staff's office computers and devices are not accessible to the residents/guests. They currently have a modem+router device that gets it's public IP via DHCP, a couple of switches and a wireless access point that both staff and residents connect to (same SSID). The catch is they don't have static public IPs and the modem+router device MUST keep the current LAN IP network schema (10.1.10.0/24) or the ISP won't provide technical support.
View 6 Replies
View Related
May 23, 2012
What is the best way to install a split tunneling on a network, I got Cisco ASA 5510 with Cisco vpn clients.
View 1 Replies
View Related
Nov 4, 2012
My question is can I split my cable to create my own network? For example my direct cable wire into the home then split it to tv then router to my laptop...
View 1 Replies
View Related
Mar 13, 2011
We have several branch offices that only have a Cisco ASA 5505 connecting clients to the Internet, our main office and other networks. Some of the branch offices uses Site-to-Site VPN to connect to our main Office, other uses a VPN-service delivered by our ISP.
The networking is working fine, but we are having problems with figuring out how to handle dns lookups. I see that the ASA DNS Client can use conditional DNS forwarding, but it cannot act as a DNS server for our clients on the inside network.
We want to do the following:
- Default dns quires should use the DNS servers for the site's local ISP (some sites also uses dual ISP, so we are using DNS1 and DNS2)
- The domain name: company.local should use our main office DNS server (acces by Site-to-Site VPN or our ISP's VPN)
- The domain name: sitea.company.local should use our SiteA DNS server (acces by Site-to-Site VPN or our ISP's VPN)
etc...
We have solved the issue by using Windows DNS server's conditional forwarding for the branch offices that has a local Windows 2008 domain controller.
our branch office's that only have a Cisco ASA 5505 Security Applience?
View 3 Replies
View Related
Jul 17, 2011
I currently have an ISP in Singapore who provides me with Internet and Phone service. Both services are delivered via optical fiber, I have a 1Gb bandwidth and one singe phone line. It is all connected the following way:
TP-----ONT-----RG-----CMS-----WR
|
Phone
And what I am looking at having is something like this:
TP-----ONT-----CMS-----WR
|
RG
|
Phone
TP = Fiber Termination Point Not a really interesting piece, just a fiber junction box ONT = Optical Network Terminal (Huawei Echolife HG863 GPON)[URL]This is where the fiber from the TP connects to. It has one fiber port and four Gb ports. No problem with this piece (so far)RG = Residential Gateway (Huawei HG265s Wireless Router) [URL]. From the ONT Port 1 I have a CAT6 cable to the WAN port of this router. It also has four FE ports and two RJ-11 ports (I use port 1 of the RJ-11). The problems are several: the firmware has been modified by my ISP so that the configuration is resticted. The port forwarding does not work. The DMZ does not work. The network ports are 100/10 (what is the use of having 1Gb?) The wireless range is crappy. I just hate it.
CMS is a CISCO SLM2008 8 port Gb managed switch
WR is a Cisco Linksys E4200 with DD-WRT
OK now, my ISP does not allow me to use any other router except the HG265. It does this by using VLANs. As far as I have been able to tell there are at least three VLANs in use (there are more but I can't identify the use for the others), one for TR-069 to manage the RG, one for my phone and one for internet.
View 1 Replies
View Related
Jan 14, 2013
I need to configure two VLANs in my home network to separate a server 1 with VM from another part of network with server 2 and wifi clients. Is it possible to keep DHCP server and internet access on E2500 enabled for both vlans? If so, how should I configure ports tagging (variant shown on screen shoot below doesn't work).
View 5 Replies
View Related
Mar 27, 2011
I can connect to the router over VPN just fine, problem is that once I connect I can not access the 192.168.1.0 network... can't ping a workstation on the network 192.168.1.25, I can however Ping the Router which is 192.168.1.254.
FastEthernet 4 is my WAN
used this for setup: [URL]
Here is the config:
! Last configuration change at 13:50:29 UTC Tue Mar 16 1993 by cjcatucci!version 15.0no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname c861w!boot-start-markerboot-end-marker!no logging monitorenable secret
[Code].....
View 5 Replies
View Related
Dec 13, 2011
I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.
I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.
View 7 Replies
View Related
Jun 1, 2012
WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.
View 2 Replies
View Related
Mar 14, 2013
i've configured Cisco VPN CLient on a router 2821, and it is working fine.I could access inside resourses normally>the problem is that when i connect with VPN i lost connectivity to internet? What is wrong with my configuration? Below the running config of the router.
CISCO2821#sh run
Building configuration...
Current configuration : 5834 bytes
!
version 12.4
[Code].....
View 3 Replies
View Related
May 30, 2012
I am unable to get traffic from any VLAN to communicate outside of the router, as well as get any traffic from outside of the router to communicate with any device on either VLAN. I am able to ping the router from each device on each VLAN, and vice versa. However, the traffic seems to die at the router, and I cannot figure out why. I know it's probably a small, easy fix, but I cannot seem to find any kind of documentation on it.
View 13 Replies
View Related
May 27, 2012
I have an issue where my vpn clients are unable to access certain vlans in my network.I have configured an ASA 5520 with VPN access using the wizard and using the ASA as a dhcp server for VPN clients. I find that this allows the clients to access server resources such as the Exchange and Domain Controller but I find that these vpn clients are unable to ping each other as well as certain vlans that I have.Is there a way to configure the ASA to use a particular vlan that is already configured on the core switches?If I create a vlan interface and set the IP of it to 10.50.x.x then the vpn clients are suddenly unable to connect to any network resources...
View 1 Replies
View Related
Jan 7, 2013
The question is apparently simple. A network is given, consisting of
- 1 network core switch: HP 5500-EI (Layer3)
- 4 access switches: HP 5120-EI (Layer2)
They are connected in the shape of a star (the core switch in the center)The task is to measure the occupation rate of this network on a per-VLAN basis.
For example : To be able to generate statistics like: During the last week - Monday to Sunday - the netowork occupation with VLAN 10 traffic was 30% and VLAN 60 traffic was 70%.
View 1 Replies
View Related
Mar 18, 2013
I have spent several days tearing my hair out trying to properly configure our small business switch (SG300-10p) for voice. The phones are a relatively new addition and will replace old POTS phones.Our network consists of a 1941 ISR router, the SG300-10P switch, a mac server (handing DHCP, DNS, AFP), 4 client desktops and 4 SGA525G2 IP phones. The router, server, desktops and phones all have their own connection to the switch and the second data ports on the back of the IP phones are not used. We do not have any unified comms devices for voice. Our VOIP solution is hosted by a local SIP provider, and each phone independently registers with the provider's SIP proxy over the internet.
Left almost to it’s own devices (or presumably flat, default settings on VLAN 1), this whole setup works just great. We can TFTP files, make and receive calls, and do all the usual XML stuff. Calls are crystal clear. Even the localisation and directory works. However, I’ve been told several times that to ensure good quality on VOIP calls during periods of busy traffic, I should set up some form of QoS. A Voice VLAN on the switch, I was told, is the best way to do this as it automagically gives priority to the whole voice VLAN over the normal data VLAN.
I have followed instructions in numerous manuals, articles and guides, and have managed to create the Voice VLAN, both manually and automatically (I can watch Smartport detect the phones and see the Auto Voice VLAN add the ports to the VLAN as I connect them). The trouble is, as soon as this happens, the phones lose connectivity with the rest of the network, including the DNS server and the router, and therefore the internet, causing them to lose registration with the SIP service.
I tried adding the server and router ports to the Voice VLAN and tweaking every possible combination of tagged, untagged, excluded, trunk, access, general and PVID settings I can think of (by the way, I have no idea what any of those mean). The switch is in Layer 2 mode, but adding the port connected to the router to all the VLANs does not result in internet connectivity to the phones. I have told the phones to tag frames with the VLAN ID and told them not to. I have tried upgrading firmware and I have rebooted the switch so many times I'm tired of those wretched little flashing lights.
Nothing seems to work. And so I am stuck with everything on VLAN 1. My most recent thought is that the 1941 needs to know about the Voice VLAN (I checked CDP and it knows about the switch), but I’m reluctant to start messing with the router config when this is our production network, at least without knowing what I'm doing. I don’t even know if QoS applies when a Voice VLAN is not set up and we're on VLAN 1, some articles say yes, others say no. And when it is set up right, how does that priority transfer to the router? I’ve looked in the router manual and config options and found something called 802.1Q, but I have no idea what it is, how it works or even if it applies to our situation. Can I forgo VLANs altogether and use QoS some other way, perhaps?I have googled enough to cobble together our setup in IOS up until now. Ideally, I would still like to be able to ssh or https into each device (as I do now) for management, and I’ve read about setting up a another VLAN for config, monitoring etc, but I guess that would mean routing between VLANs in Layer 3.
View 2 Replies
View Related
Feb 13, 2012
Currently we have an Ava ya IP Office switch running on the same network as our PC clients. I would like to seperate the two network into 2 V LAN's.
We have a mixture of Catalyst 3750 switches and some older 3500 models.Where do I start? Should I leave the PC's and servers on the default V LAN and just move the IP handsets?
View 6 Replies
View Related
Jun 20, 2012
I just got seriously nice toy to play with, Cisco SG300-10P - I know what you thinking now but with very tight budget...anyway.I configured two ports for VLAN101, Access, but when cabled in and out, it didn't work. Got Linksys switches setup the same way and they work like a charm (and I believe this should too).
View 12 Replies
View Related
Apr 23, 2013
I use the cisco 871 router as a firewall to my home-office. I have configured two vlans for each seperate port. That is, FE0 configured as VLAN 10 ----> connected to Layer 2 Switch, FE1 configured as VLAN 20 ----> connected to another Cisco Layer 2 Switch,FE2 not in use, FE3 not in use and FE4 is connected to WAN.I got 100Mbps speed from the ISP, but I can see that I only get 50mbps even connected to VLAN 10 or VLAN 20.Does configuring two VLANs on Cisco 871 router divides the bandwidth (to Internet) into half?
View 35 Replies
View Related
Jul 16, 2011
I just moved our vpn over to using LDAP/DAP instead of the previous RADIUS we were using before. First of all, the group policy split tunnel is setup for Tunnel Network list Below Network list has a group of networks named "split-tunnel" setup with all of our internal subnets in it. Which seems to be working fine, users are hitting internal networks no problem.Where the issue lies is surfing the web while they are connected to the VPN.I think I know what one of the the issues are, I'm just not sure how to get around it. I have a proxy server setup that all domain traffic goes through say 10.20.30.40. That is obviously on our internal subnet. Our remote users has a policy on their laptops set to where if they can see/get to the proxy server then it pushes all traffic through there, however if they can not, it goes straight to the internet. That way they can still surf the web when they aren't connected to the domain network.
With the new DAP vpn policies, it seems as though they are trying to go through the proxy but failing so all http traffic is getting blocked on their computer as I can still ping say google.com...just can't open the web page.In my SALES-VPN access lists there isn't any acl that allows any traffic to 10.20.30.40(proxy server) so there isn't any reason their laptop would think it could get to it correct?I can't put an access-list SALES-VPN extended deny ip any any log critical at the end of the acl list because then it doesn't show up as an option to apply to the DAP since the acls have to be either permit or deny, not a mix.Also, if I just create an ACL access-list DENY-VPN extended deny ip any any log critical and apply it to the DAP *after* the SALES-VPN ACLs thinking all traffic would flow down as in go through all the permit acls first, and then hit the deny acl after, it just blocks all traffic.It almost seems that some traffic that isn't specifically being permitted by the permit acls is still getting through which is obviously not wanted. However, if I try to rdp into a server that isn't specifically permitted in the SALES-VPN acls it doesn't work so I'm kind of at a loss..
View 5 Replies
View Related
Aug 22, 2012
I'm pretty new to this, and I've been trying to read up on what I should do. Here's my situation: we have a new 15mps internet connection coming into our building. We also have a new 891 router. We would like to devote 1.5mbs at the highest priority to one LAN which is just used for VOIP phones. We would like to allow one of the other tenants to use up (but no more than) to 5mps for their LAN, and we'd like to be able to use up to 13.5mps for ourselves if it's available, or at least 8.5mps (15-1.5-5=8.5).
From searching in here and reading the various articles on policing and shaping, I'm thinking that we'd want to set up Class-based weighted fair queuing on a per-interface basis, and have one interface connected to our VOIP switch, one connected to the other tenants switch, and one connected to our firewall. Does this sound like the right way to go? And would anyone have an example of a configuration which achieves this?
View 15 Replies
View Related
Nov 17, 2012
I have several PIX 501's and one of them is extremely slow accessing network resources and does not have Internet access. I would like to use split tunnel and have them access the Internet throught their DSL connection and any traffic for network resources sent over the VPN. How can I improve the speed and set up split tunnel via the command line? I dont have the PDM software so I guess I will need to do all the configuration via the command line. Below is the configuration:
PIX Version 6.3(1)interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside security100enable password k4HlcGX2lC1ypFOm encryptedpasswd y5Nu/Nt1/5dK8Iuf encryptedhostname
[Code].....
View 1 Replies
View Related
Jun 11, 2013
I have a Cisco 2911 Router and I need to split the traffic from my Lan (Gi0 / 0) by ISP1 (fa0 / 0) and that of my servers (Gi/0/0) by ISP2 (fa0 / 1). [code]My problem comes when wanting to communicate with my remote networks that reach the int Gi 0/1, because when my network to match the policy- route internet sends me all the way.
View 1 Replies
View Related
Mar 2, 2011
I have an ASA 5505 configured using easy VPN connecting to our corporate ASA. The ASA5505 is configured for network extension mode with a routable subnet. The clients that hang off the ASA 5505 are DHCP and get their IP address and DNS settings from the ASA 5505. I have a split tunnel setup, so only certain networks go over the tunnel back to corporate. Local Internet browsing goes out the ASA 5505 to the ISP.
My questions is how to setup split-dns. i would like to have my clients query the ISP's DNS servers for Internet based websites and when they need to access the exchange server the query goes to our corporate DNS servers. I see a setting for DNS names under the group policy on the corporate ASA, but how does the client know which DNS server to use?
The clients receive a primary DNS server (ISP) and a secondary (Corporate DNS) from the ASA5505.
View 5 Replies
View Related
Aug 23, 2011
I'm using an ASA5510 for remote access IP Sec VPN clients and it is configured for split-tunneling. The client computers are running Cisco VPN client software. All of the client computers running Win 7 work perfect, but the client computers running Win XP Pro cannot browse the internet, they only connect to the inside network.
1) Does XP Pro support split tunneling when using the Cisco VPN client software?
2) Does the ASA require a special config to support split tunneling with Win XP clients?
View 1 Replies
View Related
Mar 21, 2013
We have two 2811 router with configured interfaces:
Router1
interface FastEthernet0/0.380 encapsulation dot1Q 380 ip address 192.168.232.18 255.255.255.248 no snmp trap link-status crypto map clientmap!
interface FastEthernet0/0.382 encapsulation dot1Q 382 ip address 10.132.1.126 255.255.255.252 no snmp trap link-status
interface Vlan1 ip address 192.168.5.1 255.255.255.128 ip nat inside ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 192.168.232.17
ip route 10.132.254.35 255.255.255.255 10.132.1.125
Router2
interface FastEthernet0/0.197 encapsulation dot1Q 197 ip address 192.168.222.2 255.255.255.248 ip nat inside ip virtual-reassembly no cdp enable
interface Vlan1 ip address 192.168.1.1 255.255.255.128 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452
So my case is: computer from router1's network can ping 192.168.222.2 (router2 -FastEthernet0/0.197 )computer from router2 network can ping 192.168.232.18 (router1- FastEthernet0/0.380),but can't ping 10.132.1.126 (router1- FastEthernet0/0.382).
How can i connect vlan 380 and vlan382.I want the three vlan to see each other.Is this happen with IRB or not?
View 4 Replies
View Related
Jun 2, 2011
my problem is this:we have two 2811 router with configured interfaces:
Router1
interface FastEthernet0/0.380 encapsulation dot1Q 380 ip address 192.168.232.18 255.255.255.248 no snmp trap link-status crypto map clientmap!
interface FastEthernet0/0.382 encapsulation dot1Q 382 ip address 10.132.1.126 255.255.255.252 no snmp trap link-status
interface Vlan1 ip address 192.168.5.1 255.255.255.128 ip nat inside ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 192.168.232.17
ip route 10.132.254.35 255.255.255.255 10.132.1.125
Router2
interface FastEthernet0/0.197 encapsulation dot1Q 197 ip address 192.168.222.2 255.255.255.248 ip nat inside ip virtual-reassembly no cdp enable
interface Vlan1 ip address 192.168.1.1 255.255.255.128 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452
so my case is:computer from router1's network can ping 192.168.222.2 (router2 -FastEthernet0/0.197 )computer from router2 network can ping 192.168.232.18 (router1- FastEthernet0/0.380),but can't ping 10.132.1.126 (router1- FastEthernet0/0.382)How can i connect vlan 380 and vlan382.I want the three vlan to see each other.Is this happen with IRB or not?
View 11 Replies
View Related
Jun 29, 2011
I need to split a connection so I can get internet to two computers.
View 11 Replies
View Related
Nov 5, 2011
I got cable modem broadband and need to share that Internet amongst my home, my home office and the apartment I rent out to a tenant on the second floor. I also need them to be on separate networks/LANs/zones so they can't see each other (but still sharing the same Internet connection). How do I do this?
View 3 Replies
View Related
Dec 31, 2012
Im about to move into a sleepout which is about 20 metres away from the router. I was thinking of laying a network cable out to my room which would connect to a switch then use network cables to connect up my PS3, TV and Computer. Is this all going to work?
View 1 Replies
View Related
May 20, 2012
I'm having with my VPN Server on my Cisco 2621xm.
I started by creating a VPN - everything worked great. I assigned the DNS Servers, Domain name, WINS Server so when I connect I'm able to resolve local hostnames on the network with no problem, however I couldn't connect to the internet. I then set up a split tunnel access list. Since I've set that up, I'm now able to ping internet based addresses (www.google.ca), but no longer able to resolve internal host names. I can ping the ip addresses, just name resolution no longer works.
View 1 Replies
View Related
Mar 29, 2012
I am currently trying to configure an Easy VPN connection from an ASA 5505 to and ASA 5520. I have enabled split tunnelling and in the group policy defined the network to be tunneled but when I activate the VPN it tunnels everything from the host computer connected to the ASA 5505. I get no internet access. Have been trying to troubleshoot this for days.Hee are soe specifics, running version 8.2(5) on the 5505 and the 5520 and below is the local config on the 5505 for the Easy VPN:
vpnclient server **.***.***.**
vpnclient mode network-extension-mode
vpnclient nem-st-autoconnect
vpnclient vpngroup dbernstein-5505 password *****
vpnclient username dbernstein password *****
vpnclient ipsec-over-tcp port 10000
vpnclient enable
and the downloaded dynamic policy:
Current Server : 12.***.163.**
Primary DNS : ***.160.***.39
Default Domain : cisco.com
PFS Enabled : No
Secure Unit Authentication Enabled : No
User Authentication Enabled : No
Split Tunnel Networks : ***.160.***.0/255.255.255.0
Backup Servers : None
View 9 Replies
View Related
