Cisco WAN :: 891 - Split Internet Bandwidth
Aug 22, 2012
I'm pretty new to this, and I've been trying to read up on what I should do. Here's my situation: we have a new 15mps internet connection coming into our building. We also have a new 891 router. We would like to devote 1.5mbs at the highest priority to one LAN which is just used for VOIP phones. We would like to allow one of the other tenants to use up (but no more than) to 5mps for their LAN, and we'd like to be able to use up to 13.5mps for ourselves if it's available, or at least 8.5mps (15-1.5-5=8.5).
From searching in here and reading the various articles on policing and shaping, I'm thinking that we'd want to set up Class-based weighted fair queuing on a per-interface basis, and have one interface connected to our VOIP switch, one connected to the other tenants switch, and one connected to our firewall. Does this sound like the right way to go? And would anyone have an example of a configuration which achieves this?
View 15 Replies
ADVERTISEMENT
Oct 29, 2012
I have linksys X2000 modem and linksys WAG 200G modem I can use them both if needed I want to share my internet with my brother on our house But I want each one of us to have equal bandwidth ( speed ) How can I do this using those devices.
View 4 Replies
View Related
Jul 7, 2011
On my country, international bandwidth still expensive. I want to split local and international bandwidth and limit inbound and outbound bandwidth for each ip like this:
IP 10.100.10.11 can use 100Mbps local bandwidth, 1Mbps international bandwidth
IP 10.100.10.12 can use 100Mbps local bandwidth, 2Mbps international bandwidth
I want to use
Router 3825Switch 2960
NB: I have online one internet line.
Was the above equipment can perform functions that I want or need any additional equipment? And Should i use 2 line to achieve my goal?
View 1 Replies
View Related
Jul 21, 2012
We have ASA 5520 acting as the VPN Server and Cisco 1941 router as EZVPN client. Since last few days client is not able to establish vpn connection. 1941 router is continuously generating the below log messages
001569: Jul 22 12:19:05.883 ABC: %CRYPTO-4-EZVPN_SA_LIMIT: EZVPN(VPNGROUP) Split tunnel attributes(51) greater than max allowed split attributes(50)
001574: Jul 22 12:19:07.835 ABC: %CRYPTO-6-EZVPN_CONNECTION_DOWN: (Client) User=vpn_user Group=VPNGROUP Client_public_addr=<client public ip> Server_public_addr=<server public ip>
004943: Jul 22 11:32:42.247 ABC: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
View 3 Replies
View Related
Nov 5, 2011
I got cable modem broadband and need to share that Internet amongst my home, my home office and the apartment I rent out to a tenant on the second floor. I also need them to be on separate networks/LANs/zones so they can't see each other (but still sharing the same Internet connection). How do I do this?
View 3 Replies
View Related
Dec 31, 2012
Im about to move into a sleepout which is about 20 metres away from the router. I was thinking of laying a network cable out to my room which would connect to a switch then use network cables to connect up my PS3, TV and Computer. Is this all going to work?
View 1 Replies
View Related
May 27, 2013
I'm configurig a VPN profile with NO split tunneling. The tunnel is working to the inside, but I'm not able to get internet access. Below are the NAT statements that I created.
nat (outside) 2 0.0.0.0 0.0.0.0
global (outside) 2 (ip address)
I'm familiar with 8.6 nat statements, but with 8.2 it's not letting me put in the same commands.
View 2 Replies
View Related
Apr 20, 2011
getting internet access via a easy vpn tunnel on a cisco 877 router. Basically we would like roaming users to be able to use the internet via the vpn rather than using a split tunnel. The reason for this is we have multiple sites that are tied down via external IP access lists for some services. We would like roaming users to be able to interact with these sites through the central router and use the routers external IP address to acess the secured sites. I know we can use a proxy but we also use some other non proxy bases services at these sites so would rather direct routed access.
View 1 Replies
View Related
Aug 25, 2011
What we are trying to accomplish here use two ISP's (one cable and one T1), use the Cable line for site-to-site VPN and use T1 line for all internet traffic. We currently use the following configuration: Cisco 2820 routers terminating the T1 -> HP switch -> Cisco AS 5510 port 0 -> port 1 to LAN switch (Nortel 5510)We want to force all VPN traffic (using 10.0.0.0/24 subnets - 10.0.1.0, 10.0.2.0, etc) through a cable connection, perhaps on port 2 of the ASA, then all non VPN traffic goes to the T1.
View 1 Replies
View Related
Feb 17, 2007
setup CE500-24TT switch Port FE2 router / ports FE1,3-24 desktop / Ports GE1-2 Switch ports - MAC filtering is NOT enabled
FE1 - Cisco PIX501
FE2-24 Desktops/Printers
G1 - Empty
G2 - 8 port Gig Switch
8 Port G Switch = SBS2008 / Win2003 with Citrix / Win2K8 Management Server - plus a couple of desktops for Gig to server accessIs it possible to configure a PIX 501 to allow internet access for a Cisco VPN Client 4.8 without Split tunneling.The idea would be to have all raffic traverse the tunnel, be routed out the local WAN link on the PIX and then have the reply be forwarded back to the client over the IPSec tunnel.
View 5 Replies
View Related
Sep 26, 2011
can i use a cable splitter to connect my digital phone and my router? Currently my digital phone box is connected to the cable modem and my router is connected to the digital phone box. However I noticed that the internet speed is negatively affected.
View 3 Replies
View Related
Jun 23, 2011
I have a remote VPN with split tunnelling enabled. Currently, users connected to this VPN browses internet with his/her internet connection. Now, my requirement is that a roaming user connecting to the vpn must use our company's internet connection for his browsing purposes. How can I do this?Equipment we are using: ASA 5510
View 3 Replies
View Related
Jul 1, 2011
I need to know how to setup my ASA with dual wan links. 1 is 10/10 fiber, other will be a 50/5 Cable Wideband link. The 10/10 fiber is currnetly being used for VPN's and Internet, (about 20 point to point IPSEC vpn's currently).
I want to add the Wideband link and use the "Tunneled (Default gateway for VPN traffic)", feature for the current fiber link and the new Wideband link for any other internet traffice. I tried this however as soon as I set my fiber link to "Tunneled (Default gateway for VPN traffic), I lost all connectivity.
I also setup my "VPN" link with the "tunneled" option and my "INTERNET" link with a default route to the internet. This would only let me ping internet sites from the ASA device but not from client computers, also the VPN's would not come backup.
I have tried the sla setting with a DSL line for failover and that works good, i've since got rid of the DSL and want to utilize 2 wan links for different purposes/traffic.
ASA 5510, SSM-10 1GB RAM
ASA version 8.4(1)
ASDM Version 6.4(3)
Context Mode Single
FW Mode Routed
License Security Plus
View 5 Replies
View Related
Jan 15, 2013
is it possible to configure a Cisco 881 router to split the incoming internet connection between two ASA's? If one ASA fails then the router would switch traffic over to the second ASA. The 2nd ASA would takeover from the primary ASA through the active/standby failover configuration and crossover cable. I'm trying to avoid configuring the switch to control the traffic using VLANS if possible.
View 3 Replies
View Related
Mar 28, 2010
I have successfully setup the AnyConnect VPN (connecting to our ASA5510) and have split tunneling configured. My remote users can access inside LAN servers as well as the Internet from their remote location. What I would like to know is is it possible to change the split tunnel and not allow access to the Internet from the remote location but force the remote client to go through the VPN and out our internal edge firewall to the Internet? Basically I need my remote clients to access the Internet but I would like for their Internet traffic to go through the VPN and out our edge firewall. This will allow the same security as if they were sitting in the office.
View 4 Replies
View Related
May 9, 2012
Is it possible to configure remote access (IPSEC client) to force all traffic through the tunnel (no split tunnel) yet still limit the internal hosts that can be accessed?
I have been asked to provide remote access (via ASA5510) with the following requirements:
- the client should have unrestricted internet access via the ASA (the source address will appear to be the outside interface of the ASA)
- the client should have access to only two internal hosts (192.168.10.10 and 192.168.44.10)
Is there a way to limit access to those two internal hosts, while still providing secured internet access? The only way I can see is to use an access list on another device (for example our core switch).
View 1 Replies
View Related
Jun 4, 2011
-Taking all of the bandwidth.
-My computer is causing it.
-Our Internet providers are Comcast(cable) for default and Frontier(DSL) for backup; business class.
-Normal: 6Mbps down, 4Mbps up; Abnormal: 0.4Mbps down, 0.2 up; around those numbers.
-Possibly a virus.
-Task-manager shows as much internet use as usual, even if it is apparent that my computer is using allot during that time.
-Random times.
-Might have settings allowing it to take however much broadband it wants, I do not know if there is such a setting or not.I only have a day or so before my dad cuts me from the internet.
View 9 Replies
View Related
Nov 3, 2012
We have a Cisco 3845 router and on the G0/0 interface we have our public switch with multiple public IP addresses (servers, routers, etc..) and on the S0/0 interface we have a DS3 Internet connection. I need to limit the bandwidth from the Internet (download) to one of the IP addresses on the G0/0 interface. I'm thinking of limiting to 256K and really need info with either a policy map or something equivalent.
View 6 Replies
View Related
May 1, 2012
Router 2811 got 3 Interfaces. One Interface connected to INTERNETProvider, Second Interface connected to Sales_Dept, Third Interface connected to Business_Dept. Internet Bandwidth in Total is 8MB. I need assistance to allocate 6MB total bandwidth to Sales_Dept and 2MB total to Business_Dept Sales_dept has 48port switch 2960, Business_Dept 24 port switch 2960. Gateway for users is the 2811 Router and both are on different subnets
View 3 Replies
View Related
May 9, 2011
I recently upgraded to the 107Mbps service from sudden link. The tech tested my signal coming into the house and it proved to be very strong. I then hooked up the Motorola Surboard Docsis 3.0 modem via hardline to my iMAC and my brother's PC running 7. He and I both did the speed test and we are only getting 50-75 Mbps. The tech claimed we needed to wait and the speed would build up, but its been 24 hours and still around the 50-75 range. We also got higher rated cables to ensure that there was no loss. I made sure the settings in the modem was set to send out 107Mbps and the Tech agreed that the modem was capable of delivering the speed. Both my brother's PC and my iMac are within 3 to 4 months old. The modem is also about 6 months old. why the speed is not clocking at or near 100Mbps.
View 6 Replies
View Related
Sep 9, 2011
We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps
View 5 Replies
View Related
May 6, 2011
I have 4 laptops (WiFi), 2 desktops (LAN), xbox (LAN), and dish receiver (LAN) that are all connected to the internet using the method between the brackets. Recently i am running out of bandwidth, and what i am looking for is a freeware that i can install in one of the computers that could tell me which IP or MAC address used how much internet.I have read several articles: some articles point me to softwares which only monitor the computer that they are installed. Other posts argued that such thing can only be done through the main router. I know my router doesn't have such feature. I use SMC router.
View 3 Replies
View Related
May 26, 2012
I'm going to combine 2 512 kbps ADSL line in my PC. i know that it would be much better to get a 1 MB ADSL connection...but the problem is where i live now there is not better speed than this! Well i have a PC with 2 LANs - 2 phone lines - 2 ADSL modems - as far as i learned from Google , by no means it is possible to combine them to have 1 MB data rate but it is possible for example IDM would works with one 512 and another program with another 512..!! And load balancing is the only solution for this which it needs a special routers ! it is somehow difficult for me to provide one ..!! so my question is :
1- Is there any other solution for combining this 2 lines?! I heard something about teaming.
2- Is it possible to use load balancing by software?
3- How about the efficiency and ping time?
View 1 Replies
View Related
Dec 4, 2012
ok i have setup a subnet on my uncles network on which i am running a domain with server 2008. i am using a dlink di 624 router and wanted to know if i upgraded to a 300mbps router would this increase the bandwidth within my network?i know i am limited to what i am receiving from my uncle who is also limited to what he is receiving from the ISP. im not worried about internet speed. i want to increase client to server speed for both lan and wireless.
View 1 Replies
View Related
Sep 18, 2012
How many computers can share internet bandwidth of 128/128
View 1 Replies
View Related
Sep 24, 2011
I Just got FIOS internet at Home with 43 Mbps down and 32 up (measured speed). I replaced the included router with my old reliable RV042 (V1) VPN router that I used with my old service in NY LI. This has been working very stable for week or two, but I use my old 042 to remote desktop via VPN from my work, that was limited to maybe 9-10 Mbps (Home to office) way down from the 32 up I have now (the office has 80Mbps down). So I researched that the RV220W had a VPN speed that was much faster and I ordered one that I am trying this weekend.Out of the box, I plugged accessed and just clone the MAC at the WAN port to match the replaced FIOS router. Power cycle and surprise, no IP from FIOS!. After trying a number of things, I gave up and updated the firmware to the last 1.0.2.4, and that fixed this. I still need to clone the MAC to void calling Verizon FIOS, but at least I get IPs and Internet with no trouble.Next, I configured a couple forwards for two web servers. I found about the bug in this same forum and just used the rules instead. Working good so far.
So now I test WAN bandwidths, and I found all kind of trouble. With the old RV042 and similarly to the included Verizon router I can do steadily 43d/32u. Especially at night is quite stable in these numbers. When I went and move the cables to the RV220W (exact same set up) the speed went all over the map from 4d/8u to 43d/25u. If I power cycle the box, things tend to be stable again around 43d/25u. So, after a while being stable in these numbers I start trying things to improve the 25u that should be around 32u, and recover the missing 7 mbps. Not much I can think, so I just randomly enabled the QoS settings trying to reserve full BW for my tests, and I found just that enabling WAN QoS, and nothing else, no profiles or changes in the Priority Settings, I go up to 30u consistently over a number of tests. This do not affect the down speed that is stable at 43 mbps. The surprising thing, is why this affect to the up speed when nothing else is going on in my network? and also where are the other 2 Mbps to complete the 32 Mbps that I can do with the RV042 (V1) or the cheap included router? In my opinion, if I don't use QoS, I should get full bandwidth to whatever application/computer that requests so, period.
View 1 Replies
View Related
Jul 14, 2011
how can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
View 3 Replies
View Related
May 14, 2013
I have a 2504 Controller (os version 7.0)with 7 access poins attached and with 2 vlans. one for regular users and another for gues users.
View 10 Replies
View Related
Jun 25, 2011
I have multiple laptops and a PC in my house all connected to Verizon's wireless/wired modem/router.My laptop's bandwidth ranges from 7-20 Mbps, while the desktop cannot seem to rise about 1 or 2. The wireless card for the desktop was a USB Wireless G adapter, in the process of trying to figure out the problem, i replaced it with a b/g/n PCI card. This did NOT resolve my problem. So in a fit of desperation, I reformatted the Desktop, and Restored the modem/router to factory defaults (in that order) neither worked.
View 5 Replies
View Related
Dec 8, 2011
-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
View 4 Replies
View Related
Apr 7, 2013
I'm wondering if there is an easy way to monitor how much bandwidth is being consumed at any given moment for a home network.specifically, for the incoming/outgoing internet connection.My network is as thus:
DSL Modem -> Wifi Router (Linksys E4200v1 - PPPoE enabled here) -> Gigabit switch -> 2nd Wifi router (D-Link DIR-815 - DHCP disabled, repeats same SSID and password)
Most devices are connected directly into the switch, with one computer hard-plugged into the DIR-815 (I will eventually change this, as the 815 only has 10/100 ports).Basically, I want to easily be able to check how much up/down data is being sent for my internet connection. This means that I cannot use a program on a computer (I've used DL Meter before. Works great, but limited to a single computer).
The Linksys E4200v1 is using standard firmware, but I'm not opposed to loading DD-WRT onto it (was the original plan anyway, just never got around to it), if DD-WRT has this capability.Nice to have feature: Ability to see which devices are consuming what part of the bandwidth. Not necessary, but would be a cool feature.Alternatively, if there is a cheap (like $100 or less deal) box that can interface, say, between the E4200 and the switch, that can do this, that would work as well.
View 8 Replies
View Related
Jul 29, 2012
In ASA 5510. How I can limit the users in (VLAN 20) to use the internet with a limited Bandwidth/speed with 3 mbps upload and 5 mbps download?
In case the outside interface (Native vlan) which is connected to the ISP and have a bandwidth/speed of 30 mbps upload and 50 mbps download.
View 4 Replies
View Related
Nov 5, 2012
We run a workers camp here and we currently have around 2500-3000 people using our 100MB internet pipe. We are upgrading the pipe to 200MB soon but I still would like to limit how much bandwidth everyone is using.
We allow streaming media such as Netflix, youtube, apple TV and of course .So it gets full pretty fast. We have QOS implemented although I wasn't here when it was done so I don't know a lot about it. I would like to limit IPs to a certain amount of bandwidth. [code]
View 1 Replies
View Related
