Way To Split An Ethernet Connection
Jun 29, 2011I need to split a connection so I can get internet to two computers.
View 11 Replies
ADVERTISEMENT
Split An Ethernet Connection To 2 Computers?
Oct 27, 2011We inherited a soundbooth configuration Current Configuration:
1. Networked Projector interfaces directly with a PC through a second NIC
2. We can then control the projector through a web interface via the PC and the IP of the projector.
Desired New Configuration:
1. Maintain current configuration - but ADD a second computer (an iMac)
2. I want to split the connection coming from the projector to the 2 computers so that we can interface with the projector from both computers.
I was thinking I would need a switch but didn't know if there is any configuring I would need to do to get it to work.
Split A Single 4 - Pair Ethernet Connection Into Two 2 - Pair Ethernet Connections
Dec 28, 2011I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
Split Ethernet Cable One To Computer Other To Wifi Router
Dec 13, 2011I have only one computer right now.Had two, and got very weak signal to laptop (since discarded) upstairs from Linksys g 54Mbits downstairs at main desktop computer desktop.I have tried three different kinds of 54Mbits wifi routers, all with no success.I'm going to get my wife a new wifi laptop for Christmas, and she wants to be able to use it all over the house.The 54Mbits will cover the downstairs, but, based on previous efforts, I am thinking of putting my modem in the garage, where the cable enters my house, and using a splitter on the cable coming out of the modem to make two IN cables, using one cable for my comp and a 54Mbits router (for downstairs coverage), and putting a second wifi router on the end of the upstairs cable, to cover the upstairs rooms.My house has cable outlets in every room, so I won't have to do any wiring.
I plan to leave the routers on all the time (at this time) subject to how much of a bandwidth drop they cause. I have a 100 Mbps connection, and I play games, so I'd like to retain as much bandwidth as possible. I assume the two "on" wifi routers will pull zero bandwidth as long as the laptop is off. (??)Or maybe I should just try an "n" wifi router, since they get twice the distance, and forget the cable splitter idea.
Cisco VPN :: ASA 5520 / Error / Split Tunnel Attributes(51) Greater Than Max Allowed Split Attributes(50)
Jul 21, 2012We have ASA 5520 acting as the VPN Server and Cisco 1941 router as EZVPN client. Since last few days client is not able to establish vpn connection. 1941 router is continuously generating the below log messages
001569: Jul 22 12:19:05.883 ABC: %CRYPTO-4-EZVPN_SA_LIMIT: EZVPN(VPNGROUP) Split tunnel attributes(51) greater than max allowed split attributes(50)
001574: Jul 22 12:19:07.835 ABC: %CRYPTO-6-EZVPN_CONNECTION_DOWN: (Client) User=vpn_user Group=VPNGROUP Client_public_addr=<client public ip> Server_public_addr=<server public ip>
004943: Jul 22 11:32:42.247 ABC: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the fragment table has reached its maximum threshold 16
Cisco Switching/Routing :: Configure 881 To Split Incoming Internet Connection Between Two ASAs?
Jan 15, 2013is it possible to configure a Cisco 881 router to split the incoming internet connection between two ASA's? If one ASA fails then the router would switch traffic over to the second ASA. The 2nd ASA would takeover from the primary ASA through the active/standby failover configuration and crossover cable. I'm trying to avoid configuring the switch to control the traffic using VLANS if possible.
View 3 Replies View RelatedEthernet Connection Through The Mains?
May 19, 2011I recently brought an 85mbps Powerline Ethernet Adapter. The basic idea is that you plug it into the wall. connect it via an ethernet cable to the back of your Router and then plug the corresponding adapter into the wall and into your device.It doesn't seem to work. I'm using my iMac and the connection is not working. How to set up the connection as my wireless router is a bit far away to give me a really good connection.
View 7 Replies View RelatedEthernet Connection But Not Wireless
Jan 7, 2011My wireless was working fine... didn't touch anything and then it stopped.My roommate can connect fine and I can connect with the ethernet cable. I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.
View 5 Replies View RelatedCannot Make Ethernet Connection (XP SP3)
Aug 8, 2011I'm using XP SP3. I'm trying to connect using the Local Area Connection for the first time. Up to now I've been using wireless but I'd like to get better performance.
Here are my current settings via IPconfig:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
I've tried releasing and renewing via IPconfig. Renewing gives me the following error message: An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I've got limited connectivity. It's trying to send but cannot receive.
No Connection On Ethernet Cable
Aug 10, 2012I have vista system, belkin wireless realtec ethernet cable and alice modem internet provider is o2 everything is working as i have checked but I GET NO CONNECTION everything was fine for 2 years and then suddenly after checking the system I am told that the ethernet cable is not connected,
View 5 Replies View RelatedNo Connection Via Ethernet Cable?
Aug 19, 2012So I am trying to connect my desktop to my router via an Ethernet cable. When I plug the cable to my PC, it won't connect to my router. However when I plugged the cable to a laptop, it worked fine. I also went to check the Broadcom NetLink Gigabit Ethernet adapter in Device Manager and it has an error that says "This device is not working properly because Windows cannot load the drivers required for this device
View 2 Replies View RelatedBroadband :: Pc Won't Recognize Ethernet Connection?
Jul 28, 2011I have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.
View 5 Replies View RelatedWireless :: Set Up Ipcam Without Having Ethernet Connection?
Jan 17, 2012how can I set up a wireless ipcam(zmodo) without a modem. I got the camera because it says wireless,but it wants me to hook up via Ethernet connection and i dont have 1. I then got a netgear wndr3300 router but its not connected to anything.My Internet is from a signal within range i pick up.
View 2 Replies View RelatedInternet Connection Is Ok But Can't Connect Using Ethernet?
Feb 7, 2012I have two computers in my house that are connected via ethernet using a switch. One computer is connected to a friends internet connection by wireless using a satellite dish. That computer is on XP and I have configured it as follows (IPv4)[CODE]
View 4 Replies View RelatedNo Connection Via Ethernet No Default Gateway?
Jul 3, 2011I got a hand-me-down laptop the other day. Wireless (WLAN) works fine, but I can not connect via ethernet.
It gives the "Limited or no connectivity" message, even if the ethernet cable is unplugged (no "a cable has been unplugged" message)
The laptop is plugged in to an EWIRE modem/router. Desktop connects fine via ethernet, as does my PlayStation 3 console via wireless. So I don't think it has to do with the modem/router. It's a Compaq from 2005 or so. Windows XP Pro SP3.
System:
Microsoft Windows XP
Media Center Edition
[Code].....
I have a general knowledge of fixing the typical internet connection problem (obtain DNS automatically, repair connection, unplug modem for 20 seconds, etc) but I've never been this stumped before.
Ethernet Connection Suddenly Not Working?
Mar 25, 2011Ive been using my Sony Vaio laptop (windows 7) to connect to my uni halls internet connection by ethernet cable (and keysurf login) for months with no problems, now all of a sudden my ethernet cable is not being recognised. its not a problem with my connection or cable as other people's laptops work on it. and its not a problem with my hardware as my laptop works in other people's rooms. its just the combination of my laptop and my connection. My friend did something along the lines of resetting the IP address, but not really sure what he did. So i've done a full recovery of my computer.
View 3 Replies View RelatedEthernet Connection Has Stopped Working
Mar 18, 2012"Ethernet Connection has stopped working".Its stopped working again and I've run the Network Test and the results are in the file REG.txt attached. I can connect to the internet via wireless OK but I had wireless turned off to run this test.I've proven the ethernet cable OK by connecting another pc to it which works OK.
View 12 Replies View RelatedWindows 7 Desktop Cannot Use The Ethernet Connection
Mar 3, 2013My Windows 7 desktop cannot use the ethernet connection for some reason while it works just fine on my Macbook Pro. When I run ipconfig in CMD I'm seeing a 169 IP address which from my googling of the issue I understand is invalid. When I run network diagnostics to try to fix it the result is that "Local Area Connection" doesn't have a valid IP configuration, and that this is now FIXED. My network and sharing center screen even claims I have internet access for a few seconds (instead of a red x between the network and internet icons) before dropping out again.I've been trying all kinds of stuff to try to fix this like ipconfig /release and /renew but this doesn't work because it says an address hasn't been associated with the network endpoint and so no operation can be performed "while it has its media disconnected."
View 9 Replies View RelatedGet 2 Internet Connections On One Ethernet Connection?
Dec 2, 2012How can I get 2 internet connections for 2 in home computers from 1 cable internet connection.
View 1 Replies View RelatedNo Ethernet Connection On 2wire Home Portal
Jan 6, 2011I have a new 2wire home portal that will not connect to my PC via Ethernet cable. However it will connect to my 2 laptops via the wireless connection. it would not make a wireless connection. but would via the Ethernet connection. How can I get the Ethernet connection working on the new portal?
View 5 Replies View RelatedEthernet Local Area Connection Cannot Connect?
Feb 1, 2011My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedWireless :: Ethernet Connection On Router Is Not Working
Apr 22, 2011The other night we had a thunderstorm. It kicked me off the internet. Now, I can connect directly to my computer to my laptop (wired), but when I try and establish the connection between the Cable Modem and the Router...it will show a connection between my PC and my netgear WND3400, but not between the router and the cable modem. Also, the ethernet port on router does not light up when connected to modem.
View 2 Replies View RelatedBroadband :: Ethernet Card Installed But No Connection Available
Jun 12, 2012I've been having some problems with my Ethernet connection lately.The problem started early last week. I'm currently relocating, so I unplugged my laptop from the Ethernet connection I had at my old place.At two different locales, I have tried to use an Ethernet connection in order to get better speed (the wireless at the first locale was non-existent and at the second it is extremely slow in my room). I have done so with two separate cables that I have tested on others' computers and found that they are perfectly fine. That, of course, leads me to believe that it is my computer and is either a hardware or software problem (here's hoping it's the latter).Anyway, my laptop is a Dell Inspiron 1720 (purchased in 2006). About a year ago, I updated to Windows 7 from the pre-installed Vista. Never had any problems (as I said, everything was fine up until about a week ago). The installed card is a Broadcom 440x 10/100 Integrated Controller. Everything under Device Manager indicates that the hardware is working properly and has all of its drivers installed, but nothing is working.I have tried to uninstall and re-install the drivers (albeit by allowing windows to find them automatically), but the result is the exact same.I have checked the port and found that there is no debris or obstructions. My computer hasn't been dropped or mishandled in any way.
View 13 Replies View RelatedEthernet Overrides Wifi Internet Connection?
Feb 13, 2013First is your output from TSG SysInfo program:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 32643 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 304892 MB, Free - 237708 MB;
Motherboard: MSI, Z77A-G45 (MS-7752)
Antivirus: Windows Defender, Disabled
You must realize that I live away from the city and only have an iPhone 4 for a hot spot. It connects via WiFi, Bluetooth and USB. I have found USB quicker, but it doesn't seem to work under Windows 8. So I connect via WiFi only.I have a LAN, based on a D-Link DIR-615 router. This router has a WiFi option and has a Buffalo File server attached to the device that we use as a backup/file server and personal 'cloud'. When I am connected via WiFi and I plug in the Ethernet connection, the computer overrides the WiFi and attempts to connect to the Internet via the Ethernet port. It does know that the WiFi is connected as it is displayed on the bottom of the status bar as 'Internet', but choices to ignore or not check. I have gone to the devices and changed the priority to be Wireless on top and Ethernet on the bottom. This is done via the "Network and Sharing Center", "Change Adapter Settings", ALT-F (to get "File, Edit, View, Tools, Advanced and Menu" options), "Advanced" and finally "Advanced" again.Then put them in the priority you wish. Ethernet still overrides this and times out when I attempt to access anything on the Internet. It works the same on my wife's Windows 7 Laptop. It returns to normal if you unplug the Ethernet cable. Since I wish to have other files available, it is a pain in the bottom to have to unplug the Ethernet cable every time you change over to do something else and I usually forget and have to deal with the 'can't connect' message.It might be a simple solution to connect via WiFi to the router then hard wire the computers to the router, but this hasn't been a workable option. The router doesn't seem to be able to handle that type of connection?
Ethernet Or Wireless Connection But No Internet Access?
Jan 2, 2011I have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedPC No Longer Picking Up Connection Via Ethernet Cable
Feb 25, 2011For other three years, me and my brother have both been connected to our router via ethernet cables. On this Tuesday just gone, however, my brother took it upon himself to mess with the router whilst I was out. Apparently, his internet had been down since we'd had a power-cut on the Sunday, (My internet was fine, and always has been and was fully functional after said power-cut), and before then, it'd been going really slow, and sometimes cutting out. Okay, no problem. Now, the the thing is, that morning, I was on my internet, all happy, and when I returned home that evening, my PC wouldn't connect. My PC still refuses to connect, three days on. It's not even picking up that there's something plugged in.the router is actually flashing to say that my PC is plugged in and connected to the router. I know that there is nothing wrong with the modem or what have you, as I linked my laptop up to my PC via a cable earlier today to try and get it online. It's not a virus program problem, either. Like I said, it was working Tuesday morning, nine hours later, I come home, my brother restarted/unplugged the router, and now my PC won't connect. I should also note that he's now had to go wireless via a dongle, and everyone else in the house uses wireless laptops. I can't connect my PC to the internet with a dongle
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : PY110
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Connecting Via Ethernet Disables Wireless Connection?
Sep 3, 2012I've been trying to use my laptop (Lenovo IdeaPad Y580) as a wireless adapter for my Xbox 360 by bridging the LAN/Wireless networks and connecting the Xbox to the laptop via Ethernet. The wireless works fine normally, but when I plug the Ethernet cable into the computer, the laptop automatically disables WiFi and changes to a LAN connection. It doesn't give any options whatsoever to reconnect to wireless, just forces me to use the Ethernet connection. As soon as the cable is removed the wireless connection returns, but for what I'm trying to do to work, I need both LAN and wireless to be working simultaneously, and the wireless providing the Internet connection. I've also tried connecting the laptop to a router via Ethernet and received the same result, so I'm pretty sure it's something on the laptop that's causing it. Is there a way to change this so the laptop can use the wireless connection while plugged into another device via Ethernet?
View 4 Replies View RelatedHow To Share Internet Connection Using Ethernet Switch
Mar 23, 2012Im having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page url... where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in.I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (url..), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working.
View 3 Replies View RelatedSetting Up A Multi Ethernet Connection At Home
Nov 26, 2012I have a single Ethernet connection into my house that is wired back to the main router right the other side of the house which is approx 40m away. The whole main house is cabled but I want an Ethernet cable to my TV,DVD and ps3, plus I need wireless for upstairs in my room. My question is, can I use the same wire or unit to connect the 3 different scores?and is there a wireless extender that will reach the further 40m to my part of the house?
View 1 Replies View RelatedPC Disconnects From Internet / When Remove Ethernet Connection
Jul 2, 2012I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor!I also plan to connect to the TV.
View 1 Replies View RelatedPC Disconnects From Internet When Remove The Ethernet Connection
Jul 2, 2012I'm setting up a wireless-N router. When I removed the ethernet cable to set up a second computer on the network, I lose the internet connection! My whole point in the wireless router was to be able to stay connected without wires all over the floor! I also plan to connect to the TV.
View 1 Replies View RelatedDesktop Won't Detect The Ethernet Wired Connection
Feb 28, 2013Recently I've been trying to switch to a wired connection. The cord and the port works because I tested and the connection works fine with my laptop. But my desktop won't connect. The light where the cord plugs in lights up but my desktop does not detect it.
View 1 Replies View RelatedDesktop / Laptop Ethernet Cable Connection
Feb 23, 2013I have a desktop computer for gaming and a laptop, but when I was assembling my desktop I didn't put in a wireless card thing so i've been able to get internet since by connecting my desktop and laptop (which has wireless) with an Ethernet cable and everything has been fine.Apart from a few days ago when it all stopped working, my laptop works fine as does my desktop but the desktop and laptop can't seem to connect anymore.
View 3 Replies View Related