how can I set up a wireless ipcam(zmodo) without a modem. I got the camera because it says wireless,but it wants me to hook up via Ethernet connection and i dont have 1. I then got a netgear wndr3300 router but its not connected to anything.My Internet is from a signal within range i pick up.
View 2 Repliesi have ipcam with ip add i also have a webpage how can i see the cam on the net do i have use my router
View 1 Replies View Relatedi have a dlink dir-412 3g router. i want to add one ipcam with the router. but i have no static ip. so how can i configer ipcam in this router.
View 2 Replies View RelatedWe bought two packs of IPCAM online from a vendor named HooToo, who seems have different online sites for selling various surveillance cameras. What we purchased is a unit with model no. of HT-IP206, according to its advertisement it has a storage temperature as low as minus 10 degree, and adversely high up to 60degree. While on the other hand, it states that the operating temperature shall be strictly between zero and 55degree. What Im concerned is that what if temperature drops down to minus when a camera is fully operating? Shall extra heating system be needed while the real temperature fails to meet the above-said requirement?
View 4 Replies View RelatedMy wireless was working fine... didn't touch anything and then it stopped.My roommate can connect fine and I can connect with the ethernet cable. I ran the Xirrus and it's not detecting any networks and i'm right next to the modem.
View 5 Replies View RelatedThe other night we had a thunderstorm. It kicked me off the internet. Now, I can connect directly to my computer to my laptop (wired), but when I try and establish the connection between the Cable Modem and the Router...it will show a connection between my PC and my netgear WND3400, but not between the router and the cable modem. Also, the ethernet port on router does not light up when connected to modem.
View 2 Replies View RelatedI have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies View RelatedI've been trying to use my laptop (Lenovo IdeaPad Y580) as a wireless adapter for my Xbox 360 by bridging the LAN/Wireless networks and connecting the Xbox to the laptop via Ethernet. The wireless works fine normally, but when I plug the Ethernet cable into the computer, the laptop automatically disables WiFi and changes to a LAN connection. It doesn't give any options whatsoever to reconnect to wireless, just forces me to use the Ethernet connection. As soon as the cable is removed the wireless connection returns, but for what I'm trying to do to work, I need both LAN and wireless to be working simultaneously, and the wireless providing the Internet connection. I've also tried connecting the laptop to a router via Ethernet and received the same result, so I'm pretty sure it's something on the laptop that's causing it. Is there a way to change this so the laptop can use the wireless connection while plugged into another device via Ethernet?
View 4 Replies View RelatedI've been trying to use my laptop (Lenovo IdeaPad Y580) as a wireless adapter for my Xbox 360 by bridging the LAN/Wireless networks and connecting the Xbox to the laptop via Ethernet. The wireless works fine normally, but when I plug the Ethernet cable into the computer, the laptop automatically disables WiFi and changes to a LAN connection. It doesn't give any options whatsoever to reconnect to wireless, just forces me to use the Ethernet connection. As soon as the cable is removed the wireless connection returns, but for what I'm trying to do to work, I need both LAN and wireless to be working simultaneously, and the wireless providing the Internet connection. I've also tried connecting the laptop to a router via Ethernet and received the same result, so I'm pretty sure it's something on the laptop that's causing it. Is there a way to change this so the laptop can use the wireless connection while plugged into another device via Ethernet?
View 4 Replies View RelatedI'm sure this may appear to have been asked before but I've scoured the Internet and can't find anything exactly applicable to the setup I'm trying to achieve. I had a sky ADSL connection in my living room that had my tv, ps3, NAS and netbook wired in. I've since changed to a sky fibre connection but this had to be installed in the master phone line which is upstairs. This obviously isn't a problem for all of the wireless devices around the house including the netbook and ps3 in the living room. The NAS and TV are still wired to the old router so can see each other with no problems. Any pc trying to connect to the NAS can just switch to the old router via wifi if desired. The only problem I have is that the TV can no longer access the Internet.
I initially tried to use ICS on the netbook (it's left on permanently) - it's wired to the old router and wirelessly connected to the new one. This appeared to be working for a while but is no longer playing ball. I've tried bridging the connections and the tv and NAS both had Internet access but it's very sporadic.Is this a reasonable setup or should I be looking for another solution? I can specify a manual ip, subnet and default gateway on the tv if necessary - I was going to point it towards the bridge's gateway but I don't know about IP?
I was wondering if there was any way i could have the wireless connection go in to my laptpop then have the laptop convert it to an ethernet connection that i could then run to my ps3.
View 2 Replies View RelatedI got burned after purchasing a 3TB WD 3.0 USB hard drive that I can not use on my current E3000 or the their latest E4200. At least support knew that answer fairly fast. My bad for not taking the time to think I would have to search this website to find the short list of external USB drives that will work with the E3000.All I wanted to do was store my media files on a shared network drive. I am cheating the system now and using a shared drive on the main PC. The whole point of my project is not to have the main PC running to share media.So before I go scrap this 60 day old router, using WDs My Life 2TB ETHERNET connection external HD? Does actually have one of these drives installed on a E3000 using win xp pro? I did search high and low here, but could not find a list of acceptable external Ethernet drives or size limitations.Burnt once, lesson learned, will not get burnt again.
View 9 Replies View RelatedI've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
I try connecting via ethernet cable and it doesn't seem to work until the administrator of the network (my brother) comes home and then turns his computer on and starts using it. However, if i switch to a wireless adapter it sometimes works (like right now) even when my brother is not using the internet. Also, i tried to connect via wifi on my macbook pro to the same server and it used to work flawlessly 100% of the time, now i can only connect once in a while for short periods of times.
View 1 Replies View RelatedI'm trying to set up a wired ethernet connection to a wireless Belkin router. The wireless router works fine - I have several devices that will connect wireless with no problem. The hp desktop I'm trying with the wired connection is showing that the ethernet connection is working, but it's not asking for the wireless network name or security code, and the internet will not work?I made sure the desktop was set up to automatically obtain IP addresses, then I did the "ipconfig /flushdns / ipconfig /release and ipconfig /renew commands, but it still won't work.
View 5 Replies View RelatedI have a dell vostro 2510 vista.Am able to connect to internet wirelessly no problem but when i move laptop out of wireless range and plug in ethernet cord I cannot connect. Have 1394 net adapter and it tests ok with troubleshooting?
View 2 Replies View RelatedMy dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
I recently purchased a Mac and wanted to reset my wireless router and set it up using my mac. However, when I downoaded the software to set it up again, it said it was not compatable with my Mac OS (X Lion 10.7.4). I am sure there is a way to manually set it up via an ethernet connection, but I am at a loss as to how to do that. The wireless router is working just fine, I am able to connect to the internet wirelessly and there's nothing wrong with my internet service, however the wireless router is not secured.I have my Mac connected to the wireles router via an ethernet cord.
View 1 Replies View RelatedI just installed a new e1200 router last night and my ethernet connection is really slow. I've been reading where people's wireless is really slow, but mine is the opposite. I'm getting around .5 mbps download wired, but around 25 mbps download when its connected wirelessly. Is there anything i can do make the ethernet faster or is the router faulty?
View 8 Replies View RelatedI've recently bought a TL-WR1043ND & i'm trying to connect my Sky+ box to the Internet. When I connect the box directly to my broadband router all works OK. When I connect via an Ethernet connection on my TP-Link router - it get's an IP address from the router but it will not connect to the internet.
View 4 Replies View RelatedI've had the WRT400N for about a year and a half now and just last night it stopped sending out data when connected to my cable modem. I've tried connecting the modem directly to my Mac and it works just fine (that's how I'm sending this message now). But when the modem is connected to the router, I get no data. It connects to both the 5 Ghz and 2.4 Ghz networks, but it refuses to send data through the pipe. I've tried power cycling both the modem and the router to no avail.
View 1 Replies View RelatedWe have a E3200 wireless router but our only connection is wireless. There is no Ethernet connection or cable modem. Presently I am unable to bring up the web page ie...10.100.x.x for entering the id/pw to login. Router is setup with default settings. Is there a setting that needs to be changed from the setup menu or this type of setup will not work with this router.
View 9 Replies View RelatedI have this adsl wireless router but my internet connection only has RJ45 directly connected to my PC. My questions is how can I use my ADSL wireless router with this kind of internet connection.. because I really want to make my connection wireless..
View 1 Replies View RelatedMy WRT310n router, since yesterday, stopped working "normally".It was disconnected from the power plug in order to put it in another shelve and when I plugged it in, voilá, constant reboot.I keeps rebooting forever... I can't even make an ethernet connection. Reboot, after reboot. Tryied to make a reset with no luck, 5 seconds reset, 30s reset, pressing reset while plugging it in.Even with nothing connected to it (neither wireless nor lan), just the power plug and it keeps re booking one after another.
View 2 Replies View RelatedHave just acquired new used HP desktop running Windows Vista. System has a Broadcom NeXtreme Gigabit Ethernet card installed, which gets me to the internet OK when using a LAN cable from wireless router. But I can't make wireless connection. Vista tells me that I need a wireless network adapter.Am I missing something? Is it possible to change some settings to get the Broadcom card to go wireless? If not, what sort of adapter is needed, and is such adapter external or will it have to be installed in the system box?
View 3 Replies View RelatedI recently brought an 85mbps Powerline Ethernet Adapter. The basic idea is that you plug it into the wall. connect it via an ethernet cable to the back of your Router and then plug the corresponding adapter into the wall and into your device.It doesn't seem to work. I'm using my iMac and the connection is not working. How to set up the connection as my wireless router is a bit far away to give me a really good connection.
View 7 Replies View RelatedI'm using XP SP3. I'm trying to connect using the Local Area Connection for the first time. Up to now I've been using wireless but I'd like to get better performance.
Here are my current settings via IPconfig:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
[Code].....
I've tried releasing and renewing via IPconfig. Renewing gives me the following error message: An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I've got limited connectivity. It's trying to send but cannot receive.
I need to split a connection so I can get internet to two computers.
View 11 Replies View RelatedI have vista system, belkin wireless realtec ethernet cable and alice modem internet provider is o2 everything is working as i have checked but I GET NO CONNECTION everything was fine for 2 years and then suddenly after checking the system I am told that the ethernet cable is not connected,
View 5 Replies View RelatedSo I am trying to connect my desktop to my router via an Ethernet cable. When I plug the cable to my PC, it won't connect to my router. However when I plugged the cable to a laptop, it worked fine. I also went to check the Broadcom NetLink Gigabit Ethernet adapter in Device Manager and it has an error that says "This device is not working properly because Windows cannot load the drivers required for this device
View 2 Replies View RelatedI just got a new Xbox today, and use the integrated WiFi card. I was lagging like Crysis 2 on a 6800 GT (forget it). I just got a CAT .5 cable, and plugged it into modem/xbox and IDK... it works, I'm online, but basically my question is:Does ethernet connections have less ping (better) than wireless connections? This is with the Xbox 360 Slim. I know it improves upload, and download, but what about ping?
View 2 Replies View RelatedI have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.
View 5 Replies View RelatedWe inherited a soundbooth configuration Current Configuration:
1. Networked Projector interfaces directly with a PC through a second NIC
2. We can then control the projector through a web interface via the PC and the IP of the projector.
Desired New Configuration:
1. Maintain current configuration - but ADD a second computer (an iMac)
2. I want to split the connection coming from the projector to the 2 computers so that we can interface with the projector from both computers.
I was thinking I would need a switch but didn't know if there is any configuring I would need to do to get it to work.